exactly what i needed! i looked all over the internet and could not find that simple answer! thank you sooo much!
@zydeco15dancer Жыл бұрын
Thank you so much! This is the first video, that I’ve come across, that addresses the changing of the shoulder slope, after other adjustments (time stamp 7:09). After I attached my sleeve, I discovered that my shoulder joint was straining against my garment. I was just thinking that I would have to go back to the drawing board, after several pattern adjustments (full bust, narrow shoulder, high round back). The problem did not become apparent until I attached the sleeve. I knew that I had to increase the fabric in this area, and your video explains the theory of why this is happening.
@vivenna2 жыл бұрын
Super clear and exactly what I needed - thanks a lot for your detailed explanations also regarding the neckline
@trudywolcott74194 жыл бұрын
Thank you for this video. I’m wondering how the shoulder adjustment affects the set in sleeve. What, if anything, needs to be done to the corresponding set in sleeve? Thank you.
@SparkyOne5492 жыл бұрын
You need to make the same adjustment to the sleeve cap.
@maryannefox85297 жыл бұрын
Great video Alexandra! Thank you so much. This has really helped me as I have narrow shoulder width and need to adjust a pattern I am working on. I could never understand why whenever I adjusted the shoulders the neckline would bulge out. I will definitely be viewing more of your videos.
@tobim4ever2 жыл бұрын
Thanks Alexandra for this detailed tutorial . I will be visiting your channel more.
@hazelkinvig-paul82316 жыл бұрын
Thank you! My shoulders are very narrow and every pattern I have bought have the shoulders falling off me. I am a beginner and know nothing about adjusting patterns to fit, so this is great! TFS xx
@carolg.68383 жыл бұрын
Thank you. I have so much to learn about fitting. This will help.
@annescanapico21817 жыл бұрын
Great video on the narrow shoulder adjustment. However, if the secondary fit problem at the neck occurs should one raise the new shoulder point to the original height above?
@AlexandraMorganInHousePatterns7 жыл бұрын
Yes!
@theangrypoodle4 жыл бұрын
Hi Alexandra this video was so helpful but is there any way to shorten the shoulder width without changing on the shoulder slope?
@SANDRA-gp8mn4 жыл бұрын
In case one needs to shorten 1 inch, is it possible to use the same method?
@debdamico99733 жыл бұрын
So interesting, how these changes have a ripple effect. If it's a sleeveless garment can't you just chop off 1" at the shoulder point so the slope stays the same??
@alfredm97632 жыл бұрын
That was great tutorial
@eleanorvanpelt5695 Жыл бұрын
It looks like the narrow shoulder adjustment might make the opening for the sleeve a bit larger for the sleeve. Although I haven’t tested it. What do you think?
@marleenvanhecke1957 Жыл бұрын
Thanks for this video, it will be a great help for me as I have narrow shoulders. Can you just use your original sleeve after a shoulder adjustment? or is it needed to make adjustments to the sleeve also?
@kandacek633 жыл бұрын
When adjusting for narrow shoulder and forward thrusting shoulder, which modification should you do first? I assume the narrow shoulder?
@cormonose3 жыл бұрын
I have this problem also(narrow shoulders and forward thrusting shoulder). Please, will someone address this?
@carissavance52172 жыл бұрын
Hi! I love your videos and recently listened to you on the Love To Sew podcast! I use a wide shoulder adjustment, but can't figure out if this can be done for a knit dolman style sleeve. I love dolmans, but find the necklines tend to "pull" out some at the shoulders. Thanks! 🙂
@ruthgahlgren5 жыл бұрын
Your presentation is excellent. Is there a reason you choose not to use Nancy ziemans approach of pivot and slide?
@beemann85424 жыл бұрын
Hi, where did the 2 inches on the shoulder comes from? Was it the new width of the shoulder?
@louiselill15285 жыл бұрын
I have just found your channel and I have subscribed thank you so much for this video I have narrow shoulders so shall be trying this . If I find the neck rising do I alter the neck too ?
@amartin9884 жыл бұрын
Thank you, this is an great explanation and has really helped.
@momzilla94916 жыл бұрын
Hi from Toronto!!! This is sooooooooooo great!!! Thank you so very much.
@luoyisishimisi4707 жыл бұрын
Thank you for your videos. I have just subscribed today. Have you already done a narrow back neck width adjustment video? I always seem to get a lot of gaping in the back neck area.
@AlexandraMorganInHousePatterns7 жыл бұрын
Not yet, it's on the list.
@nynurse25 жыл бұрын
This was SO HELPFUL!.. Thank you!.. I have just subscribed and I will be checking out your other videos..👍👍👍
@foggylog19 Жыл бұрын
How would you correct for slope but keep the length correct? I need to add 2cm to length, so i imagine the slope will be affected
@mauramcfall92897 жыл бұрын
Thanks so much for a great video. I've just returned to sewing after many years and discovered the latest pattern I used does not fit as I expected. It is far to wide on shoulders and big on bust and tighter than expected on hips. I fear there are too many adjustments to make on this project but luckily I only used a piece of material I have had for ages and not too bothered about it failing. For future though I am now worried I will have to make so many adjustments it's going to be beyond my skills. When we were taught at school....many years ago ....all the adjustments were made to the garment at fitting stage and not to the actual pattern so I'm really struggling.
@AlexandraMorganInHousePatterns7 жыл бұрын
Maura, you're not alone in that struggle. I'm glad this helped.
@BUS76SE7 жыл бұрын
Maura McFall o
@Rakshak7284 жыл бұрын
Nice mam thanks
@patronaje4 жыл бұрын
Hola cuánto cuesta el libro
@ckim51344 жыл бұрын
So what shoulder line do I use to make it fit right?
@rleibman6 жыл бұрын
Hey Alexandra! This is super clear! But... I'm working on a men's jacket, I need to shorten the shoulders by about half an inch on each side. In a men's jacket the seam line is not at the top of the shoulder, but about an inch behind, so I'm not sure the pivoting will work. What do you think?
@AlexandraMorganInHousePatterns6 жыл бұрын
Hi Roberto, You can use the method that I show in this video : kzbin.info/www/bejne/rZ3OgIh9aLygn6c The only difference will be that you will create your vertical slash line around mid shoulder or so-not the neckline.
@rleibman6 жыл бұрын
Cool, I'll try that!
@malaanand72296 жыл бұрын
Hi... What is the significance of shoulder dart? How does it affect the fitting? Also can you please explain the importance of notches on the armholes and the sleeve head.... How to determine the positions of these notches? Thank you.
@AlexandraMorganInHousePatterns6 жыл бұрын
The shoulder dart is there to address the shoulder blade. Without it there is usually a slightly gaping neckline or armhole. The rounder the upper back area is, the larger the dart will need to be to accommodate it. The notches in the armhole guide you in setting the sleeve into the bodice. The armhole notches are determined first, then the sleeve notches follow: You can watch this video for a demonstration:www.inhousepatternsstudio.com/blog/quick-tips-for-patterns-that-fit-take-a-walk
@malaanand72296 жыл бұрын
Alexandra Morgan - many thanks for your guidance and help... God bless
@rmpatpath39166 жыл бұрын
I bought dress which has narrow shoulder ,I'm a broad shoulder female,so how can I make it broader to fit my shoulders in?
@AlexandraMorganInHousePatterns6 жыл бұрын
Unfortunately, this isn't possible to do in most cases, it is better to choose a larger size in this case and adjust other areas unless of course, you have some seam allowances you can work with.
@wendyb79936 жыл бұрын
I have the issues of the other front and cannot think how to get rid of excess fabric as the shoulders and sleeves fit perfect HELLLLP 😫
@AlexandraMorganInHousePatterns6 жыл бұрын
Hi Wendy, I don't understand the issue you're having, you will need to clarify.
@wendyb79936 жыл бұрын
Alexandra Morgan. I’m so sorry I mean the narrow shoulders is my problem area !!
@ST-og2cb6 жыл бұрын
Where did the armhole notches come from? Were they on the pattern? Or did you draw them on?