How To Make A Spear - Spear Making Tutorial

Visit: JakesCustomKniv... for more detailed information.
Easy spear making tutorial, in this video I will show you how to make a spear out of solid metal for $20 at Home Depot. Using a 3 inch floor chisel and a 6 foot piece of black pipe.
Thanks For Watching Please Don't Forget To Like and Subscribe
• How To Make A Dagger -...
~-~~-~~~-~~-~
Please watch: "How To Make A Custom Kitchen Knife from Old Saw Blade"
• How To Make A Knife Fr...
~-~~-~~~-~~-~

[@lukecampbell2773]

It’s quite interesting to see these videos about making a spear for $20, which then proceeds to show the material and its cost, and then proceeds to create it with equipment that likely cost over $1k. 😊

[@lukecampbell2773]

Very well made though!

[@Maixo]

Oh shaddup!

[@klondikebar48]

Im sure you can achieve the same result with a little ingenuity and creativity, he was just using what he had access to, I'm quite sure the lack of industrial grade equipment didn't stop people from making one of the oldest inventions ever, It's a spear.

[@johndiamond2548]

You could do it all with a vice, 4 1/2 inch grinder and a hand drill. Use a 1/4 inch piece of pipe instead of 1/2 inch. Use a smaller floor chisel - one with a neck width closer to 1/4 inch. Mount a 3/8 inch drill in the vice and turn it down with the drill. The only addition I would add for this awesome design (by the poster, not me) would be a weld bead to hold the friction fit blade in a little better. I have a welder so no problem for me. Buy a case of beer for one of your friends that has a welder and ask him to do it. Or bring it to a welding shop. The guy will probably charge you $25 (or do it for nothing).

[@SonoraSlinger]

Built my forge for the price of a dollar store hair dryer. Bought an anvil for less than $150. From there, it's all practice.

[@petten33]

This spear really exhibits some character, here. Are you brasing the blade to the pipe? Just wondering, as an oaken dowel would really compliment the chisel-spear. Music, also a good choice. Keep up the good work, son.

[@frro28]

Very nice, should just have cut the threaded piece of the pipe off.

[@thatguy2408]

Dude was quoting the prices and I had to stop the video and check how old it was.

[@SharpWorks]

Sick! When you look at the final product it looks like it costs way more than $20 great job man!

[@gooberdooberwunderb]

What is holding the spearhead to the pipe?.. wont the head pull off when removing it from a target ??

[@arnauhoms9022]

6:13 WHY ? 🤔

[@hardyanpajero69]

👍😎🍺🍕🔨🔪

[@MakoRuu]

We didn't need to guess, bro. It says so right in the title.

[@justinhorn4246]

That's probably the coolest spear I've seen. Definitely making one. Thanks man. Keep up the videos

[@killmimes]

Blade geometry is wrong. It won't go in very far.

[@adambrazzel1063]

Stand in front of it

[@lazaruslazuli6130]

I must have missed the part where you heat-treated the blade. I thought you were going to forge that chisel point into a leaf-shaped spear point. I'm not a fan of the fat, diamond shaped blade.

[@dariuszblack7956]

To be honest spearhead can slip from pipe. It should be drilled and there should be metal pin to hold it in place. Rest is ok. I made something similar but using old file for longer blade.

[@gateway8833]

I thought I would be watching a forging video, but this was kind of cool to see this. Well done, looks like you had a good time. A couple of notes for you to consider. A spear is a 3 dimensional weapon. Your spear design is really cool looking but not functional. If this spear was used, lets hope there is never a need for that, but if it was used the wide diamond shape will get stuck in rids and pelvic bone, possibly the skull. Alot of the use of a spear is as a defense weapon to force an opponent to extend, meaning a spear is used in a extended sweeping motion, thoes diamond tips will cause the spear to roll in your hand and you may lose grip. Any there is more but I'm sure youmade this to spear plywood, hopefully.

[@waynewalters426]

The main use of a spear is as a projectile weapon. Or maybe to thrust. Not to be swung in an arc as you describe. It's not a polearm or an axe. I think the spearhead he made in this video is not a far cry from a broadhead arrow tip.

[@kamaeq]

Depends on the planned use. If the forging wasn't compromised, then he made a steel/iron staff with a wide pointy end.

[@thuglincoln7699]

See if you can guess what it's gonna be based on the title

[@Casualgaming763]

So all the equipment you used is under $20 at home depot you say? I know you said under $20 for the pipe and chisel etc. But are we supposed to have everything else already? Of not could you gentleman point me in the direction of that homedepot. I have a lot of shopping to do :) lol

[@bjornodinson4889]

that is the most bad ass $20 spear I have ever seen good shit man keep it up and how did you learn to make knifes and stuff? self thought?

[@truemusiciansmith3010]

U said guess but the title clearly says a spear come on now

[@terrybest8973]

tim wells in acction bud good job love it lol lol hog killer right there bud yeh

[@micahpickering2068]

You gotta wonder how much it weights

[@AsKuRiUs]

The reason rome owned most of the known world at one point well spears and strategy.

[@zackhopkins5185]

I want to turn my kbar into a spear

[@dennishein2812]

Heavy but strong.

[@ats440you]

Great video. For those living in the Southern states, try using bamboo. It is strong and light and often available for free. Great for spear shafts.

[@ShadeSlayer1911]

I like bamboo, but I think it's a bit on the light side for a spear, no?

[@quesder]

Wow no need of heat treatment

[@kenmerriman4112]

nice spear and cool video thank you BUT big ?? why the holes in the pipe. decorative ? it would decrease the strength of the pipe rather significantly as far as I can tell thanks for any reply regards Ken

[@shaggy_e210]

I'd suggest tack welding the spear head to the pipe, on the next one

[@kamaeq]

Epoxy would have done the job as well.

[@jaymuzquiz2942]

Jake do us a favor, can you not make the coolest knives because some of us live mediocre lifestyles and we don't want nor need such a high standard in knife making.

[@GZBulletZA]

American Ninja

[@honorsoul]

Soundtrack?

[@sauliusdzindzaletas9766]

not finished

[@TheHellSpawn000]

Should carve a groove into the end and hammer it in this way the pipe bites into the spear tip. Then you could drill a hole through it and put some rivets into it to make it secure... My god... So many people complaining about 30$...

[@brewmaster0507]

that's is the coolest bad ass spear ever. great job and thanks for sharing.

[@JakesCustomKnives]

Thank you, If you like this you will defiantly like some of my other videos

[@Spike-yi7nd]

Nice!!!

[@stephenh7336]

What would the total price be for all the tools you used? So to extend your statement....wouldn't it be more like, "If you have a fully stocked metal working workshop, it only costs 20 bucks of materials to then build a spear."?

[@willyam9735]

Doesn't that band playing on this video know any different songs?

[@bid1998]

Finished product looks very nice. How is the weight?

[@royshobe6642]

Thanks for making this video

[@noahjones2478]

how long did it take to sharpen

[@slingshotwarrrior8105]

awesome spear

[@jacobhill3302]

Welp, time to go hog hunting

[@charlesdixone1706]

petit la prochaine fois évite de lancer sur une cible , té bon pour la fabrique, bon boulot '

[@TheRpapito]

nice but way too much time to make. Cold Steel sells the boar spear for 100

[@Draskinn]

Yeah, but which is cooler? Showing your buddies a spear you bought or showing your buddies a spear you made? A spear you bought is a novelty, a spear you made is a story!

[@guyh.4553]

Really liked the idea of using the drill press for cylinder shaping. You had me up to the point of mounting it onto a pipe. But good work

[@Kurogane_666]

That coarse file, whats the make and info on it? i havent seen a file like that in ages

[@seancullen868]

would love to see what you could make by forging it to shape

[@Ziyaadoo]

looks amazi g Jake. Why did you not heat treat and temper it?

[@JakesCustomKnives]

I was going heat treat it, but the chisel was already heat treated and is very durable. I didn't want to take the chance of over hardening the steel and having chip or break. The chisel held an edge pretty well even without heat treating it..

[@Ziyaadoo]

awesome. How did you know it was already heat treated? is there any test to do?

[@JakesCustomKnives]

+Ziyaad Bayat chisels are made to be durable. You can get a set of Rockwell hardness test files to get a better idea how hard the material is.

[@robertgoodhope7217]

learned a lot from vid and comments.

[@nathanosborne5827]

you have really good videos new subscriber

[@Maixo]

Nice job👍

[@cholder9112]

when are you going to finish it?

[@johathanbelky4774]

Very nice!

[@tylerwade8056]

Damn 30 isn't 20.

[@junichiikeda5860]

Nice one!

[@highlander200268]

i didnt see any heat treat here?

[@JakesCustomKnives]

+Highlander nope the chisel was already heat treated to be strong and durable.

[@almuhtrf9531]

جميل جدا

[@jeffceriotti]

Would love to have one. Need to get on it.

[@brannonbrown7720]

Your grinding is on point

[@bigpete4227]

I liked it.

[@triune_blades]

That is one nasty WMD!

[@JakesCustomKnives]

What does WMD stand for?

[@triune_blades]

Jake's Custom Knives Weapon of Mass Destruction.lol

[@heckeultrabrutality4720]

Scump

[@adiadi5948]

another one of those " do this for under 20 bucks" videos....ok u got all ur stuff now lets get started, first u need a hacksaw and a vice then u need a file and a drill press and then a lamborghini and a 18 carat diamond and there u go, a thing under 20 bucks....

[@fredrickmann7623]

Adi Adi someone sounds bitter.

[@adiadi5948]

Fredrick Mann , not really, just not a huge fan of clickbait...it makes it less interesting...i made a gokart with no powertools, for 300 bucks...if i posted a video saying make a fast gokart for 300 bucks and then used a drill, angle grinder, welder, etc... thats not really 300 bucks now is it?....no...

[@stevenjohnson2273]

Adi Adi these build videos assume you have some basic tools and skills.

[@adiadi5948]

We shouldn't assume, only imbeciles and wise men assume and wise men dont comment on youtube videos.

[@stevenjohnson2273]

Adi Adi you really should reread your last comment. I only comment when I feel like I can add to the conversation constructively.

[@roadhandviking2741]

Not bad at all. I'd have gone a different way with the shaft, but it turned out great. Keep up the good work

[@jonathanchark5291]

What would you have done differently with the shaft? I'm curious.

[@standodge5536]

Thanks for the “rough” idea. There’s so much more you could have done but I suppose you’re not really trying. Just slap it together and throw it on YT.

[@Matasiete666]

Make a roman "pilum" Is the best spear

[@thewoodworkingmetalhead2712]

in the thumbnail it says 20 and then you say it costed 30 dollars #worst video ever