How to Make a Spinning Flagpole from Start to Finish

[@lajohn8408]

This video is wonderful, about 10 yrs ago I purchased supplies for making the swivel rods, weighted rubber balls, etc. for flags and I never made more because it was just too expensive your video is a game changer my praise dance group will be surprised when they see brand new flags. Thank you for sharing

[@jozettaphillips6192]

I will be making this for easter this week 🙌 thank you soooooo much

[@mommamelliemel]

That's wonderful! You're welcome!!!

[@tawana2inspire]

Im new to flagging so praise God for you because those things are EXPENSIVE!!! I went and brought all my materials. Thanks

[@armida5626]

Thank you so much for the tutorial, God bless!

[@amandakuykendallSHW]

Terrific tutorial!!! Very clear and well thought out! THANK YOU!

[@rebeccaspaulding5350]

where can I order a weighted dowel ball?

[@mikecartwrightbeach]

What a GREAT and simple solution. Thank you for taking the time & trouble to share all of this.

[@marcusjwilliams1974]

I love the pictures

[@veronicadavis1298]

This is what I needed. I'm just learning to flag. Thanks so much!

[@doloresrojas3823]

@Melanie Price if u do buy the weighted ball will it fit the bottom of the stick......also thank you for the tutorial it is so helpful they are so expensive and I can make these for my team

[@mommamelliemel]

+Dolores Rojas Thank you so much! You would need to make sure that your weighted ball has an opening that is slightly larger than whatever size dowel rod you are using. Weighted balls come in various sizes. Again, thanks for your comment! Blessings!

[@daisies4444]

Thank you Melanie, I have been searching for such a long time trying to find how to make these. Where did you attach the Velcro to please?

[@ChaeBijou]

This was helpful, but can you make a list of the materials in the description? Or here in the comments? God bless!

[@jairomeza262]

Can you please tell me were to get weighted balls

[@mimiwhi287]

hello, Melanie i found your video to be very informative, i have just one question, How did you attach the fabric over the velcro and is it necessary to use velcro? I have to make some very soon.

[@mommamelliemel]

+Mimi Whi Thanks for your comment! I only use Velcro, because I change my flags. If you use something else, I'm not sure that your flags can be taken on and off. Blessings!

[@aretharushing1155]

Hello can you make another video on how you sewed the fabric onto the pole? I thank God for you.

[@mommamelliemel]

+Aretha Rushing Thank you so much for your comment! I'm unable to make another video right now. The flag attaches by Velcro tabs that can be purchased at any craft or Walmart store. May God Bless You!

[@Aliby7509]

this video was very helpful. Thank you.

[@gloriaamos3366]

Great, thank you for sharing this!!

[@mommamelliemel]

You're welcome! I hope the video was helpful! Take care!

[@arielrhinehart4162]

This is the best video I've seen. Thank you so much for helping us. One question: How much velcro is necessary? Is it attached to the material and also the pole?

[@mommamelliemel]

Thank you so much! I'm glad that you found the video helpful. To answer your questions: I only use a small piece of velcro (about the size of a postal stamp or smaller). Yes, the velcro is attached to both pole and flag. However, I try to make sure to use the same velcro sections are placed on the poles and the reversed velcro piece on the flags. Reason: So you can easily change flags and not have to worry about the flag getting twisted while spinning. Additionally, you can easily switch up poles and flags at any time without having to worry that the same velcro sections are attached on the opposite piece (e.g. both flag and pole having smooth sections and therefore do not stick together). It keeps things simple if you always start out the same way and try to place the same velcro sections on the same flag and opposite to the pole. Thank you for asking this question, because it really helps when making even two poles. Even if a person intends to only make one or always keep the same flag attached, some thing could happen in time and it could potentially save a lot of time and hassle! I started out making 2 and now have at least 20. I write on the velcro package: "smooth side: pole" and "rough side: flag" so I do not forget over time & have to go get a flag to know. Another thing to keep in mind regarding velcro that I experienced the hard way is that in most cases, simple & inexpensive (not professional grade) velcro works fine unless it's for a recital or event where you're not going to change flags & must ensure the flag stays put. I once used a large strip of professional grade velcro when first starting out. Every thing was fine until the day I needed to chage the flags. Wow! I had no idea how tight some velcro can hold! I almost tore my flag trying to get the sections apart. Now, I primarily use pre-shaped velcro squares or circles sold really cheap at Walmart. The sizes are small and works well. I have some really large flags (+50") and they hold up well! The small sections of velcro make it easier to adjust if needed. Lastly, I find it helpful to lightly align the velcro sections in place without pressing the peices firmly in place. This way, it's much easier to adjust the location(s) if desired. Again, thank you! I also hope you have a very blessed upcoming New Year!

[@daniellecharland-gruhzit7788]

Melanie Price oh. Thanks.so much for this detailed explanation!!! 💗

[@moonchildcrafts3819]

Thank you so much for posting this video!!!! Praise God this is right on time for me. I could not purchase enough flag poles for my team it is way to expensive. But now for a fraction of the cost I can have plenty of poles now might I ask how you attached the flag to the pole?

[@mommamelliemel]

+S. Solomon Thank you so much for your kind words! I'm glad that you found the video helpful! To answer your question: Use Adhesive backed Velcro Tabs to attach to one side of the flag and the other to the flag pole. Make sure you use the same side of the Velcro Tab for all of your flag poles and use the other side of the Velcro Tabs for all of the flags so you have the ability to can change flags on your poles. Put the Velcro tabs inside of the flags near each end and do the same on the flag poles spinners near each end. Slide the flag down the flag pole and push the Velcro tabs together. That's It! Blessings!!!

[@moonchildcrafts3819]

+Melanie Price Thank you for such a prompt response. I am going to my local hardware store as soon as I leave work and I know exactly what I need to purchase! Thank you so much again.

[@Jag4MEH]

Will be trying this thank u

[@nataliagotirza]

Please make a tutorial about how to make swing flag

[@katiuscamodeste7186]

Wow sister thanks. I was need the mashure, God bless you..

[@karlamenendez6474]

Where do you buy the ball that goes at the bottom of the flag?

[@mommamelliemel]

Hi! Most of the time I use 1-1/2" unpainted wooden balls with pre-drilled holes found in most crafts stores such as A. C. Moore, Joanns, Michaels, etc. Another option for a really good ball end at a very reasonable price is online at Worship Products: worshipproducts.com/html/tubes_parts.html The link should take you to the web page were multiple flag parts are sold, including the ball ends that will not need painting & already have holes for the flag rod. I hope your flags turn out great! Take care!

[@mommamelliemel]

Additionally, I now use clear 5/8" water tubing for the spinning tubes instead of PVC piping. I buy it at hardware stores such as Home Depot & Lowes really cheap. It is sold in long rolls of 10 0r 20 feet and cuts much easier. It can straigthen out easily by being weighed down overnight. It weighs a lot less and looks really nice on the finished product! Happy flag twirling & have a wonderful day!

[@karlamenendez6474]

Melanie Price thank you so much for the tips and the video is going to save me so much money and now I can make flags for my kids at church!!! God bless you!!

[@mommamelliemel]

You are soooo welcome! I'm soooo glad to help you! Another thing that I forgot to mention is the hardware stores such as Home Depot also sell some of the best dowel rods at very cheap prices that are usually extremely straight and come in a range of diameter (width) sizes and usually longer (about 48 inches long) than those sold in craft stores (about 36 inches long). However, if the dowel rod is too thin in diameter (width) it can break when spun too hard (although I have never had one do so). For very young children, you can also try using thinner diameter (width) rods and thinner water hoses. The water hose is really helpful if you need lighter flags and it looks really nice on a pole(s) stored without an attached flag(s). Just make sure the dowel rod has enough space to spin inside of the hosing, PVC piping, or what ever you decide to use. Some times the water hosing is listed under the inner size of the hose and/or outer size...make sure the inner size (diameter) of the hosing allows enough space for the dowel rods and they are not the same size. lol (I have almost bought the wrong size more times than I would like to admit :>) I grab a dowel rod off the shelf or bring one with me to double check just to be on the safe side! Heee heee! I am really glad you realize how much it can pay off to make your own, as opposed to buying them even at wholesale prices! I went from having 2 professional flags to making a few dozen at the same price! I have different lengths and many, many flag poles now. As you mentioned, it really pays off when you need many flags for groups like at Church! Hopefully, you will be able to make a great collection and have a lot of happy flag twirling praisers & worshippers! Blessings!!!

[@karlamenendez6474]

Melanie Price amén!!! Thank you🙌😊

[@cvilla97]

HI where can I find the dowel ball?

[@mommamelliemel]

Hi! For the best prices on weighted balls and other parts, checkout WorshipProducts.com pr click on or copy/paste this link worshipproducts.com/html/tubes_parts.html

[@mommamelliemel]

Hi everyone! Seems like a lot of questions have been asked about where to find the ball on the end... For the best prices on weighted balls and other parts, checkout WorshipProducts.com or click on or copy/paste this link worshipproducts.com/html/tubes_parts.html

[@NaturallyZee]

You did a wonderful job! Did you make the flag also? Attaching the flag to the pole was not clear to me. Could you explain a lil more. I'm dancing this Sunday and will be making this Saturday!!! :)

[@yeshuadancer]

Sew a pocket along one edge. Glue the pocket to the pipe material. I use spray glue along the shaft and hot glue the ends.

[@carissa703]

Where did u find the on you paid $20.00 for

[@gmonkey6523]

can you scratch my back please x