How To Make a Spring Resilience Powered Bow From Bicycle Wheel

[@etherealswordsman3214]

I like the idea, but i can't help thinking you need stronger springs, and probably ones that are shorter in general so you can draw back further and pack more power in the shot.

[@Confusedbaanda]

000099090009900p

[@СергейКаргинов-с6ш]

Для улучшения лука вместо болтов нужно было ещё пружины поставить.

[@joshlower1]

The actual arms need to be sorings themselves as well for a combine effect

[@victorro8760]

​@@joshlower1 These limbs don't store energy so that would just increase the inertia of the system at no benefit. That inertia needs to be overcome using energy used to draw the bow and that energy should instead be used to accelerate the arrow.

[@JesusIsLORDbro3-3]

Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?

[@DoremiFasolatido1979]

Put the springs on the outside of the bow, all the way to the ends of the outer arms. Half-extend them before stringing. You'll get a longer draw and more power, with a tighter resting position. Just make sure to use decent springs because otherwise they'll just end up set as they are and lose power. Needs high-elasticity material.

[@Qwert-4960]

Tight?😩

[@JesusIsLORDbro3-3]

Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?

[@DoremiFasolatido1979]

@@JesusIsLORDbro3-3 you're a scammer...or a psycho.

[@whatyousay63]

​@@JesusIsLORDbro3-3always a complete nut entering....

[@benoitdalle8536]

Looks super effective on targets within 3 steps.😂

[@victorhugocastillo8580]

ya 4 pasos el arco no es efectivo 😂😂😂

[@mobilegamersunite]

I was thinking 🤔 that 2 seconds into the video 😆

[@paulx873]

Real talk😂

[@000fuyt]

🤣🤣🤣🤣

[@some_random_guy_mk2]

Inspires me to make one though, you know: when fools be two steppin. Some good ideas but no 'wooshka' power...🙂

[@onlinemuseumcms2774]

I think the bow would actually work when you use a shorter string and put the springs already in tension before you draw.

[@Neopolitan_Illusion]

Why not remove the springs entirely?

[@jiseongkwon66]

@@Neopolitan_Illusion For the bow to release and allow the arrow to travel a good amount of distance, there needs to be a mechanism on the bow itself that allows it to stretch or flex. Here, a spring is used for tension. Normal bows without springs have a compliant mechanism meaning that the structure itself allows it to flex, which grants the string more tension to release the arrow. This metal bow would not be able to flex without the springs since the structure of the bow does not allow it to bend, due to the fact that the metal parts of the bike wheel are joined together with screws.

[@benjaminvarner3231]

@@jiseongkwon66 I'd be curious about a hybrid spring/cam design...

[@timlizered165]

I agree shorter strain shorter more tense springs would be a more effective idea but for a starter bow quite effective

[@conradladouceur7557]

@@benjaminvarner3231 the cam would only increase the tension with a shorter draw length.

[@СергейКарпенко-п1в]

Шикарно! с 3-х шагов в дерево попал!

[@GHOSTKENNY]

Знать бы с какого раза…

[@SAMEZ35]

Стрелы экономит

[@МурзабекСагынбаев-у4х]

Интересно,а с четырёх шагов попадёт?

[@ДмитрийЧервонцев-в7й]

🤣

[@АлексейПетров-м8б4с]

Такой только на рыб охотиться можно в прозрачной воде.

[@michaeldelay600]

This is cooler than the other side of the pillow. What an original concept!

[@GenkaSavenka]

А я всё ждал, что в конце покажет, как стрелы изготовлять.

[@gabdsung9654]

Надо бы назвать: Как окончательно испортить велосипедное колеср.

[@НикитаНаумов-г3б]

Интересная игрушка для ребенка, помню как в детстве делал лук из орешника, он бил прицельно от силы метров на 20, вот бы в мое детство посмотреть ваш ролик...

[@АлексейОзеров-й4й]

Ролик был-бы в разы ценнее, если-бы были даны рекомендуемые размеры для обеспечения оптимальной геометрии. Да и характеристики пружин не помешали бы.

[@Чрныйплащ-м2б]

@@АлексейОзеров-й4й да похуй, для баловства ребёнка и обычной измерительной ленты хватит. Вам тут не надо соблюдать идеальные геометрические показатели, упругость метала и жёсткость пружины. Из такого говна путний лук не сделать. Из него даже стрельба по правильной технике не возможна. А баловаться ребёнку и такой пойдёт)

[@goldden812]

@@Чрныйплащ-м2б баловаться ребёнку, леску на прут натяни и хватит, а не точить какую то дичь в гараже пол дня...)

[@Чрныйплащ-м2б]

@@goldden812 чем собственно мой батя и занялся в своë время) причëм прут искал по всей Черëмухе во дворе☝😎

[@ДмитрийХитрый-ь9д]

@@АлексейОзеров-й4й характеристики пружин😁😁😁 видно же что херня получилась. если б он эти пружины для разгибания лука поставил+ норм тетиву+ направляшку для стрелы ой короче все переделывать за ним

[@maximgurikov9677]

Очень сомнительные стрелковые испытания)) Оружие получилось исключительно декоративное.

[@Lute_Mars]

В зомбиаппокалипсис сойдет)) против рядовых зомби)

[@GooDSmileBaby]

Это в начале игры, открываешь сундук , а там лук из колеса атака 2)))))))

[@АлексейПетрович-у8д]

@@Lute_Mars Ага, конечно.

[@MrLyzian]

@@GooDSmileBaby хахаха

[@vladimirmartinov7282]

Так ведь из говна и палок.

[@dahandsomeguywithcoolglass8949]

For post apocalypse this video sure are goldmine.

[@WildCraftsman]

😘☺️

[@mffthefrog1307]

*is a

[@АлександрСинкевич-л5ю]

На достигнутом не останавливайся. Попробуй колесо от паровоза.

[@КисаМарковна]

Точно, и вместо пружин можно использовать амортизаторы от трактора

[@adama7869]

@@КисаМарковна и стрелять ядерными ракетами

[@Destyner]

@@adama7869 вас могут за раскрытие гостайны привлечь!

[@НиколайСуровый]

🤣🤣🤣

[@Евген-г9я]

Огонь. Ждём видео как сделать лук из хлебного мякиша, прессованного риса и волос жены!

[@americanfreedom2324]

🤣🤣🤣

[@sekirashop]

Ха, прикольно! Не думал о подобном выборе материала для лука)) Отлично

[@shtrafbat5881]

Хрень получилась

[@JesusIsLORDbro3-3]

Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?

[@sandasturner9529]

Good vid. Seems like something out of those Sci-Fi movies and thriller/horror movies I usually watch.

[@DaveMiller2]

Not a replacement for an actual bow, but a cool idea. Very innovative. Neat to look at. Long term durability, noise when shooting, and repair in the field would be problems. Ingenious though.

[@brandondaniel47]

Good assessment.

[@joeschmoe6908]

Ingenious but every aspect of it renders it ineffective? Strange assessment.

[@Wha73v3r]

and weakness, i think this design barely holds 5lbs and if we talk about 20lbs(+) the rims probably would bend but yes the design is cool

[@zBobb1118z]

@@Wha73v3r fr i was like arent those aluminum? thing will be basically a toy

[@horstelvis83]

Nice idea! If I have to guess this is a 15 lbs draw fun bow not capable to shoot through a plastic water bottle. Stronger springs and the party would be on.

[@ВиталийАлександрович-х9н]

Круто, стрела с 2х метров в дерево воткнулась, можно и на охоту! Это самый лучший лук, ближнего боя.

[@ShadeAKAhayate]

Ага. А ещё лучше навершие прикрутить -- и, держа за противоположный конец...

[@purpleraccon]

Знаете, какие же люди странные: придумать идеальное оружие дальнего боя, основанное на простейшей физике, а потом, спустя несколько сотен лет, начать использовать его как дубинку. Не генально ли? Деградация взяла верх, или разум, вам решать, но "лук ближнего боя" я запомню навсегда.

[@Marcus_McGuire]

Your draw length needs to be further back and it would be more accurate, more powerful, faster, and more comfortable. It’s essentially a compound bow with recurve attributes. It’s a fantastic idea and I’m only trying to give you advice. I make recurve bows and also bow hunt a lot.

[@Миша_Синенький]

Мы в детстве делали разные луки, проще всего было сделать из фибергласса, получалось очень даже круто и думаю много легче показанного, а за рабочий обод могли и уши оторвать)

[@дмитрийлеготин-ь1з]

Из Черёмухи хорошо шло метров на 50)

[@uculeleist]

Из детских лыж, распиленных вдоль как-то отец делал нам...большой получился, как и полет стрелы.

[@ЮрийРулёв-и2ж]

Давным-давно Даня Крастер делал лук. Вернее он делал несколько луков - один точно был из скейтборда, по моему из детских лыж тоже было.)

[@vnuk32ru]

Самый простой и надёжный в моём детстве (90-е) Вяз или дуб длиной 1,2-1,4 метра дед замачивал в соляном растворе на доске с приданием изначальной формы. Стрелы - болотная трава "черет" в наконечнике гвоздь 70 примерно, с конусной насадкой из простой консервной банки. Тетиву леской 1.0 делал, стрела реально на 300-400 метров улетала. Смотря на вышеопубликованное - Хочется автора послать на канал "Доктор Дью" - там похожих самоделок и лайфхаков преподносят пачками, хорошо, что с юмором. Радует, только то, что наше детство прошло без интернета!

[@ЮрийРулёв-и2ж]

@@vnuk32ru сомневаюсь что Матвеев возьмётся за такое, он больше по инструментам и рекламе DeWalt, о котором, кстати, он знает процентов на 30... Раз вы знаете про Матвеева, то предположу что в курсе о Дане Крастере. Вот у него в старых видосах был лук из скейтборда, по моему ещё из детских лыж тоже было (ну уверен), по моему ещё из кровати из Ikea делал... Короче, он делал несколько луков и последний из скейта был самый удачный. Посмотрите, если такая тема интересует, Даня там много чего про науку тоже ля-ля))

[@DmitriyNeizvestniy]

Канал надо было назвать "Как можно выжить после зомби апокалипсиса?"))

[@nikolaishriver7922]

The intro was so peaceful.. I was not mentally prepared for that first angle-grinder cut lol

[@JesusIsLORDbro3-3]

Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?

[@nikolaishriver7922]

@@JesusIsLORDbro3-3 You're Jesus

[@JesusIsLORDbro3-3]

@@nikolaishriver7922 no.

[@ВиталийАлександрович-х9н]

Мы в детстве делали "арбалеты" из велосипедных насосов... Всего-то нужен был насос,доска, трубка медная от трактора (для дула), гвоздь для курка, жгут и снаряды, мы использовали подшипник, но можно было использовать камушки или пластилин. Воробьёв на раз спать укладывал...

[@Ryslan-tm4qs2hy2q]

Живодëр что ли?

[@isagadji05]

Вместо пружин надо было использовать резинку, желательно от семейников. А так, чисто для баловства, прикольно сделать ребёнку.

[@Хам-и6ч]

Ликбез от камбоджийского партизана !!! ☝️🤙

[@pccchurch]

So, a hardware store components toy shaped like a bow. Using modern electric tools, prefabbed aluminum, nuts+bolts and store bought springs you "created" a "bow" that can barely withstand 10lbs of pulling force with no sights and proven inability pierce a thin plastic bottle at 5 ft using a store bought modern arrow. 5000 years ago, craftsman could make a 10x stouter bow that could pierce woolly rhino skulls at 80 yards created using basic wood carving hand tools and actual wood. 100 years ago John Moses Browning could make a 1911 semiauto out of a handmill. 80 years ago a crippled peasant created the symbolic AK using a pick and sheet metal. But today, this is what we are left with. I'd be impressed if u used simple tools to make something advanced and useful vs using advanced tools to make something that will break if u use it twice. Just sayin.

[@tacuska7]

Thank you, to writing this down so i don't have to.

[@David-bc4rh]

I think you may have missed the point that this design is simplistic and builds quickly. Yes plenty of improvements to be made design and material-wise. A hacksaw would have done the job of the angle grinder and it would have taken just a bit more time. You are making faulty comparisons of historical iconic inventions that required incredible amounts of time and know-how with this junk made weapon.

[@tacuska7]

@@David-bc4rh you don't Understand the point. This design is made for a postapocslyptic scenario, where everything would be hard to find Imagine you have to tweak it, and it's breaks down in your hand, because it was too weak for a stronger spring

[@David-bc4rh]

@@tacuska7 I don't see anything about the intent of the bow being for post alpacalisp, although i know from experience that springs, bike rims, and nuts and bolts are so ubiquitous I can't imagine them being difficult to scavenge from just about anywhere near a city or town or land fill.

[@mishanja-b6h]

Прикольная конструкция, молодца ! Только , чтобы по деревьям пострелять, надо было по-дальше в лес уйти...пару дней пути и стреляй сколько хочешь ! не далеко ушел, короче...

[@MobTheGlitch]

Very ingenious design! Though like many in the comments, I wonder about safety and durability due to the materials used. Paracord might also not be a very effective option. It does look very cool👉👉

[@misterkaos.357]

Remind me again, what kind of cording is considered "archery-grade?" I'm more of a firearms kind of guy.

[@MobTheGlitch]

@@misterkaos.357 I'm not sure. My best guess would be to use actual bow string but a bit thicker and longer to use in this setup. However I also understand the aim of this build is suppose to be a bit diy apocalypse style, where you make it work with materials available to you.

[@misterkaos.357]

@@MobTheGlitch Suppose I went to the hardware store to look for cord. What sort of material and gauge should I be looking for?

[@mocknugget]

@@misterkaos.357 you still here? Modern bows like compounds that have the same concept as this spring bow uses synthetic materials like spectra or dyneema. If you don't have a archery store near you, find braided fishing line same material as the former. Preferably around 0.50mm or 0.021 in, should already be rated above 60lbs.

[@misterkaos.357]

@@mocknugget "You still here?" Nigga, I've been here since the Nintendo 64 was first released in America. I am what the zoomers refer to as a "dinosaur." Anyway, you say I can make my own bowstring out of fishing line? Cool beans!

[@anguskong5132]

Would love to see you hunt with it! Love the diversity of the comments! I Love You World! Wish we could all be one!

[@michaeladamstone2911]

Whaaaaaaaat. That was so easy it looks great I'm going to try one when I find a bicycle wheel thank you

[@kundalinirvana7401]

”When I find a bicycle wheel” 🤣 Don’t know why but that really cracked me up for some reason.

[@Perunasin]

Это конечно не обычно и круто... Но, у меня ряд вопросов по поводу функций : Какова сила натяжения?

[@moscowtime8876]

Никакая вообще... Здоровый мужик такую конструкцию сломает голыми руками

[@congobongo1743]

I was always curious about this design, this video answers my question, it looks cool, still classic bow more durable in long run (that springs will rust, make too much noise in hunting, need more power/effort to use etc) but seriously it looks badass, love to have a carbon-fiber version myself whit laser pointer just for LOL's.. Good Job !

[@ragnar999tobi]

when u hunt, u have just one shot! miss and your prey is gone! if the springs are painted or powder-coated springs, they might endure a lifetime! With such a bow you can also hunt fish... people always think u need to shoot 50-80 yards or more...

[@givemeanameman1]

If the springs were thicker and kept under tension they wouldn't make much noise at all(you would need string silences like any string)

[@jamessan3404]

@@givemeanameman1 just use thicker spring like ones from frame of MTB. Plus don't put a string on it without tension ( I'd personally make arms still pivot but aided by spring since that would be far easier to string)

[@MrLoobu]

If the limbs bent and released energy too instead of pivoting, and the springs were enclosed, it would be much better

[@talyn3932]

This is no hunting bow. Lol. No way in hell this has the draw weight needed to take something down.

[@motog4-75]

Brilliant. Straight out of the A Team.

[@leooram1959]

once more, here I am watching someone else working their own projects while I don't work on mine because this is how I spend all my time

[@hobbes1887]

Feel u

[@eponymous_graphics]

I've seen this video a couple of times now ... might as well sub. Subbed. Thumbs up .

[@mattban4136]

I love it, but I would worry about the draw noise scaring away your game. Also... I wouldn't expect to get 100 shots out of this. But what a great proof of concept!

[@rojomofeta496]

Eres Iñigo Errejon??

[@LetItBe250]

재미있는 아이디어네요~ ^^ 살아있는 나무에 활을 쏘는것 보다는 판자에 쏘는 시범을 보여주었다면 더 좋았을거 같아요.

[@АлексейИванов-я3б2г]

Гениальное изобретение!!! Патент!!!

[@ИмяФамилия-х1п9ж]

Выглядит практично и интересно. Отличная идея лука

[@WildCraftsman]

☺️

[@ДмитрийЧервонцев-в7й]

Для ближней дистанции, очень ближней, самой ближней.

[@xxLeCurexx]

Cool now I know how to make a bow for the post-apocalypse world!

[@ГераТГератович]

Хорошая идея ! Есть куда развивать.

[@user-yt4oc8dw2v]

Ага, обод мотоцикла и можно балисту замутить)))для ценителей создавать видимость работы)

[@dennisw8166]

Ah, the grinder! My favorite tool!

[@joewlaine3131]

Интересная идея для рамы. Лук на короткой дистанции мне понравился из колеса мопеда и резинки от рогатки. Компактное и рабочее приспособление. Автору спасибо за идею 👍

[@ShadeAKAhayate]

Там же всё максимально хлипкое. Не удержит нормальную конструкцию и нормальное натяжение.

[@ЮрийРулёв-и2ж]

@@ShadeAKAhayate как было упомянуто выше в одном из англоязычных комментариев - это всего-лишь дряблая и некудышная копия одного другого мастера, то-есть, *плагиат* . От того и сделано всё на соплях и ради просмотров и лайков...

[@skybork5555]

Мне кажется изза разной силы натяжения пружин его будет уводить, то вверх, то вниз.

[@metkiyspider9849]

Это же ведь фигня на китайских, и Украинских, и, американских, соплях, Фуууууууууууууууууууууууууууууууууу, тухлая фигня

[@НОВЫЙВЕК-ъ2э]

😂😂😂​@@metkiyspider9849

[@filfil8652]

Знатная hyita получилась. Блестящая.

[@ДвиждаТархович]

И это предел - 20-25 метров дальность стрельбы с убойностью выстрела? А пружины? Со временем и пружины и верёвка растянется. Идея неплохая, а качество ниже минимума.

[@Persev444]

Can you post some general info on supplies, cutoff wheel type used, glues, bow string , range, bow draw lb#? Ty

[@tswellersalzer1850]

I would fear the limbs will break.Aluminum over stretched is questionable.

[@qwispychild9491]

It's elastic limit likely isn't even approached with this bow and with the assist offered by the springs I imagine it is safe

[@MrAllan9]

I agree, the pivot point wil probably colapse, especially if we're to increase the spring tension. I like the simple concept tho, leaves room for creative modification.

[@adventureswithfrodo2721]

The aluminum limbs do not stretch. Until he added the springs all I could think is there is no way this would work. Using paracord show lack of knowledge of the materials used.

[@LilPoopsie]

If you needed a weapon for hunting, it'd work smh

[@jamesJohnson-qe4gw]

It's springs vs metal fatigue

[@JensTomiczny-rn9dy]

Genial das werde ich auf jeden Fall ausprobieren. Mal eine andere wariante 😊👍👍

[@shawncarter5619]

Cute. But your draw length is severely limited. Also, aluminum from a bike wheel might not give you a dependable draw weight...not the greatest material for extended use...not bad in a pinch though

[@givemeanameman1]

Actually if he ran paracord along the reverse side of the bow tight, it would stop the bending of the aluminum and reinforce it... much how Greek trireme had a central tension rope that connected the bow and stern.

[@shawncarter5619]

@@givemeanameman1 meh...maybe it would help a bit, but once you apply any force beyond the UTS of that particular material it will permanently deform.

[@zetprimordial7087]

That's because its not depending on the bike piece at all for the draw weight. Only the spring.

[@McBurnside6380]

This will be good for when the Road Warrior movie becomes real life.

[@andreyivanov8850]

Как владелец лука скажу - на видео херня. Скорость стрелы никакущая, энергетика тоже. Направляющей для стрелы нет, хер попадёшь. Мусор, короче.

[@faridmirzayev9865]

Абсолютно верно,это очень жесткий лук никакого натяжение,эластичность 0

[@navigator1669]

Для детей нормальный лук. Красивый, стреляет. Детям мощный лук и не нужен.

[@jonathanblackburn3449]

For this amount of work I’d make a laminated bow out of the pallet that’s probably sitting in an alley behind this guys workshop

[@El_Bellota]

The problem with those types of springs is that they deliver less power the more contracted they get.

[@e1wook72]

역시 한국의 각궁이 세계 최고임을 다시 한번 느끼게 하는 영상입니다

[@paveldemidov6555]

Это хорошая вещь против близоруких бандитов

[@МихаилЧеркалин-и7п]

Нравится мне,когда сначала покажут изделие,а потом изготовление. Конструкция лука интересная, но думаю прочность маловата.

[@ОстапБендер-Задунайский-ю7ж]

Народ, вот почему у нас в Казахстане идет в ютюбе преступная мошенническая рекламма про инвистиции. Или мошенничество у нас узаконили?

[@squinglebong456]

Cool build! I just think it needs stronger springs and a tighter string

[@ahdid6105]

Nice tool to hunt at 2 meters' range.

[@WildCraftsman]

😅

[@ahdid6105]

@@WildCraftsman I think you should use a shorter spring and tighten the string more. Thanks for the video. It is interesting. 🙂

[@WildCraftsman]

@@ahdid6105 you are correct,i just made a pattern.the power is determined by spring you pick.if you want it be more powerful,try shorter and bolder one with much more resilience.👍

[@thomasolson7447]

He's Asian. I think you're expecting a bit much to see him draw a 60 lbs bow.

[@ahdid6105]

@@thomasolson7447 I thought that racism ended. Obviously, I am wrong.

[@mikegould6590]

A few questions. - integrity of the bow given the spoke holes. Do these require reinforcements - weight and gauge of the springs - length of bowstring

[@tejindersidhu2630]

Seems like you have never made bows and arrows in your childhood, kids thesedays

[@thecraftingcrew874]

@@tejindersidhu2630 top 10 people who love to insult others asking questions

[@Михаил-ы2р5ф]

Уважаемый мастер, спасибо, было очень познавательно, в плане саморазвития.👍

[@cyrusol]

Wow, he's really fast with those screws!

[@vaclavvaicehovcki2942]

Огромное спасибо очень круто и всё ясно показано спасибо💥💥💥💥💥💥🔥🔥🔥🔥🔥👍

[@johnnyrotten665]

I have to ask, what were you using as a ground quiver? I couldn't get a clear look at it at all.

[@kreator2646]

Если убъет летучую мышь, то пусть не ест

[@dronsan9695]

😆👍

[@dmitrijdenisov8882]

А если кабана?😁

[@kreator2646]

@@dmitrijdenisov8882 ковид от мышей пошёл вроде, кабанов пусть ест))))))

[@ЮрийКузнецов-ъ4з]

@@kreator2646 а свинной грипп от кого пошел?

[@cyx0406]

shame your self

[@ВасисуалийКанделябров]

Нет ничего лучше для лука и арбалета, чем рессора от "Москвич 412"

[@globalist_kabalist]

Хм… мне кажется алюминиевый сплав обода не очень подходит для таких нагрузок, даже с использованием пружин. Быстро треснет

[@mr.soliankagames9927]

Там пружины детские он их с легкостью натягивает

[@quadsman11]

Take a few new attempts at refining this concept ! You could actually be on to something in a post apocalyptic society where survival of the ingenious might become impairative ! While I might sound a bit sarcastic, I can assure you, I am quite serious ! What are you using for your springs ? What can we do to refine your pivot points ? I think it may help with quieting down your release ! What are you using for your drawstring ? And what could you possibly use in a survival situation, where you might not have access to a local sporting goods shop ! Spring selection is obviously going to be critical ! And static spring tension prior to your initial draw, will certainly assist with potential lethality ! What's the chances you might consider doing a second new, and improved version ? Seriously, you might be on to something, when you have to do with what you happen to have available, and not what you wish you had ! You definitely have my attention !

[@NBI07]

Идея не плохая. Но натяжка для взрослого человека очень слабая. Тетива сильно расслаблена и пружины можно взять покороче этих. Но если лук делался для ребёнка тогда пойму.

[@RedouaneSebbar]

can the bicycle spokes be used for arrows ;) loved the vid

[@ObJIuK]

Конструктивно нужны доработки, идея приемлимая

[@bigh8121]

Please explain. Thank you on advance.

[@johnM-Jr]

I see a large population of people who want to be ready and free. Good people w love in their hearts. At one time, they did tichi sets in the park, not sure they can do that starving in lok dn. Dude sure lives in the country.

[@Богдан-е1з1щ]

сделать более универсальное крепление дуг, дабы их можно было складывать для транспортировки, да увеличить натяжение.

[@ericsmith4513]

Oh yeah 😎. Soft aluminum wheel? 👍 👌 🙆‍♂️ 🆗️

[@obsidiansands]

That's probably only good for a few shots as the durability is questionable, nice build though.

[@vincevalentine2407]

I too would like to know the longevity of this bow

[@ericsmith4513]

Oh yeah 😎. Soft aluminum wheel rim?

[@obsidiansands]

@@ericsmith4513 depends on the make of the alloy, aluminum can be soft or as rigid/strong. All aluminum bicycle rims do have their breaking point from enough force. And any metal can fatigue. That's why most bike wheels get warped with enough damage. It's tough, but not indestructible. Over time, an aluminum bow will also give way - the question is "how long" before it breaks. Bows are made to a different set of standards/tolerances depending on the amount of draw weight it can do - and it's different for every user. A 70 pound draw weight would shorten the lifespan an DIY bow made out of an aluminum bicycle wheel considerably.

[@user-fj6hd1hc8y]

It was capable enough to support the entire body weight of a fully grown large adult

[@ALPHAofSIGMAS]

Great 👍 job. Great make shift bow. Might come in handy. Urban survival

[@hu4ngming]

做的好厲害！只不過弦以及弓身之間的彈性有可能需要更融合，這樣射程更遠，殺傷力更大一些. 拉空弦之時，聽說不可以直接放開，要不然彈簧會受損!

[@刘格好]

g五步

[@ahmadhasif979]

I think i prefer grow trees and make wood bows,, Plus im not skill n didn't have powertools,, Scrap metal use for arrow tip or forge KERIS. But anyway it's got nothing todo with the video,, The video is good, the guy is enjoying and inspiring others

[@احمدالفهاد-ي8خ]

انت حقا بارع جدا👍🏻👍🏻👍🏻👍🏻👍🏻

[@douglaseagle8991]

Give this guy a bicyle, he will create an entire arsenal

[@mayankmahasuri6766]

Next video: "How to make a fighter jet with bicycle wheels" Lol jk, amazing content tho💯🙌🔥

[@vnuk32ru]

Даже стесняюсь спросить: усиленная шайба + гравер под болтовое соединение не нужны? Через 80-100 реальных выстрелов у моей покойной бабушки костыль в лучшем состоянии остался. // Стальная труба диаметром 3/4" при такой же сборке с использованием станка для гибки труб и закалки после печи в масле усилит упругость конструкции минимум в 3 раза, а если ещё "дверные" пружины заменить - тогда реально годная вещь получится.

[@BOLESLAV_LIVE]

Можно сделать все, что угодно из чего угодно. Вопрос в том, стоит ли заморачиваться и создавать уже созданное, причем без шансов превзойти его качеством.

[@PrimePhilosophy]

At 5:15. Shoots tree stump from 3 paces away and the arrow only penetrates about 5mm. I doubt this would harm an animal unless you were standing over it already.

[@franciscopacheco7914]

Excelente! 🏹

[@A_SPEC_OF_DUST_IN_THE_UNIVERSE]

You are a GENIUS 😁😃 YOU created a very inexpensive powerful bow 🙃🙂

[@Wha73v3r]

inexpensiv? yes nice design? yes powerfull? nah

[@josephpaolo168]

I give him credit for just looking at a bicycle wheel and saying.... You know what, I could make a bow out of this !!!

[@deadlineuniverse3189]

The next post apocalyptic survival game needs this bow in it

[@RobinCwaaan-j2o]

This guy would survive in a zombie apocalypse

[@teinu6218]

Hell that beats all Wild Craftman gonna chop up my bicycle wheel and do it

[@johnsaccucci6154]

How about some mountain bike rims and trampoline springs?

[@tylersawyer2011]

What do you call those rollers that the string goes through??

[@aleksandrbrandt9118]

Оригинальная идея. Спасибо Вам за видео. Скажите пожалуйста, на ваш взгляд на какое усилие этот лук? 30-40 lbs?

[@vladimirmartinov7282]

Спасибо за идею. Есть ролик про стрелы ?

[@leonmago1]

Genius ^^

[@valentinassabaliauskas913]

Is it any good?

[@_creighton]

Good stuff. Thanks for sharing.

[@anvoyage89]

I dont know why I see this, but really nice work bro!

[@WildCraftsman]

😅

[@llllllllIIIIIIIIIII]

How much tension? (lb)

[@Faidzwan]

What roller he use? What should i type to find it