How To Make A Springtrap Cosplay Head from Five Nights at Freddy's 3!

Welcome to the full tutorial on how to make a Springtrap cosplay head from Five Night's at Freddy's! I listened to my amazing subscribers, and tried to make the perfect tutorial for y'all to follow and make the best Springtrap head you can!
I also constantly get asked this question: "how do you see through your masks?" I had to make an entire video on it, but still get asked the question. Basically, the eyes you see in the video are what I call "'show eyes". They have Velcro on the bottom so I can take them out and replace them with see through eyes. To make see through eyes, use mesh instead of white paint. I just use those eyes as display or show eyes to make the costume look more realistic. Hope this helps
List of materials:
Remember to check places like thrift stores, small businesses, or garage sales for any of these materials so you can save more money and help out small businesses
Project foam: www.joann.com/...
Fabric: Olive Green Anti-Pill Fleece. Make sure it's stretchy. Available at Walmart, Joann's, or a fabric store near you
Brad Pins:
Plastic Ornaments for Eyes/Eyelids: Sizes vary based on head size. Available on Amazon, or at your local store come holiday season.
Plastic Mesh Canvas for Jaw Structure: www.michaels.c...
Metal wires: www.michaels.c...
Colored Wire (You may be able to use stuff around your house, but here's a cheap alternative):
Black Rubber Tubes for Ears (Sizes may vary based on head size): www.lowes.com/...
Oven Bake Clay for Teeth:
Fake Skin (although fairly cheap, I recommend using peach colored felt that you can paint on, just based upon availability):
Fake Skin: www.amazon.com...
Peach Colored Felt: www.michaels.c...
#cosplay #diy #fivenightsatfreddys #fnaf #costume #gaming #youtube #craft #tutorial #howto

[@cynthiagorkowski9089]

I just finished making a Springtrap costume for my Grandson. I am a 77 year old Grandmother and your KZbin videos were so helpful.

[@AyeJayDeeDIY]

That's great to hear! I'm glad I can help 😁

[@scrrippy]

W

[@TwinkleWorldOrder]

Your grandson is so lucky

[@Pipplin]

You’re an awesome grandma!

[@baimo_ofc]

AHAHAHA YOU'RE THE BEST

[@vaderinatuxedo4428]

I made my springtrap helmet gold and just made it as dirty looking as possible because it just makes sense to me

[@AyeJayDeeDIY]

Nice! Whatever works for you is perfect 😁

[@AncientLordProductions]

i’d love to see it! if nots that’s fine

[@erikarsov4365]

Bling trap

[@shortychris2000]

@@erikarsov4365lol

[@TZBonnielol]

​@@erikarsov4365BEING CHELLIN

[@evabadalamenti3189]

Wow ! I actually saw the FNAF movie last month and discovered the huge story behind the games etc. And now I can't stop watching fnaf related content and I really want to build a springtrap suit. As far I don't know anything about cosplay, your video and the clear explainations just filled me with so much hope and excitement ! I can't wait to try to do it ! Thank you !

[@michalbeeble4569]

I'm working on a springtrap costume for halloween and this tutorial will help so much. Your mask looks great!

[@AyeJayDeeDIY]

That's awesome! You'll have to show me when you're done! And thank you so much! 😁🙏

[@michalbeeble4569]

@@AyeJayDeeDIY Thanks! One problem though, when I make it how will I see out of it? Can you see out of yours? And what foam do you use? Sorry for all the questions

[@AyeJayDeeDIY]

@@michalbeeble4569 I love that you're asking questions! And if you check out my channel, I actually posted a video that answers all of those questions! Here's the link to the video 😁 kzbin.info/www/bejne/oF6nco2QYp5ml6M

[@wordedpuppet6278]

After seeing the FNaF movie, I’ve finally decided I want to make a suit of the yellow rabbit. This tutorial is absolutely perfect for me, as it’s very close to what I’m wanting. Here’s hoping mine turns out looking alright! Would love to hand out candy with it next Halloween!

[@AyeJayDeeDIY]

That's awesome!!! I hope it helps 😁

[@ten_stepa]

Same for me! Good luck!

[@monsterzeroarts7468]

Just for info the pre-springlocked form is called spring Bonnie

[@wordedpuppet6278]

@@monsterzeroarts7468 The yellow rabbit is a unique design as it’s partially withered, making it a mix of spring Bonnie and springtrap. That’s why I refer to it by its movie name.

[@Ivy_the_fox_therian]

ive been a FNAF fan since i was 3 years old and im now 11... yes ''too young'' not really i enjoyed it. but the best thing is that ive never made anything about FNAF... my parents are still upset about me liking fnaf and watching the movie so having an entire suit of the guy who killed innocent children and died in this suit is going to be the final straw for them but i really dont care and im going to waste their money on something that i need but dont need at the same time. thank you so much for showing me this creation this MASTERPIECE now it is currently 4am and i am gonna see and list everything i need to spend money on. thank you i am thankful for this tutorial!

[@AyeJayDeeDIY]

Glad I can help 😁

[@monsterzeroarts7468]

I’m so happy I found your channel Springtrap is my favourite character and I have been trying to figure out how to make a costume forever but I thought I needed a super expensive 3d-printer Thank you for helping me realise this is something I can do without having thousands of pounds

[@AyeJayDeeDIY]

Glad I can help 😁🙏

[@monsterzeroarts7468]

@@AyeJayDeeDIY time to speed make this before fnaf movie leaves the cinema!

[@Random_Guy444]

Wow! That's impressive! This will be a very useful tutorial for me!

[@AyeJayDeeDIY]

Thank you!! Glad it can help 😁

[@GroundCTRL2MajorTom]

I’m remaking my spring bonnie in honor of the new FNaF movie, and to terrify my house guests. I was struggling with doing the jaw but your tutorial helped me! My head looks great so far!

[@AyeJayDeeDIY]

That's amazing! And I'm really glad to hear that, thank you 😁 And I would love to see your head!

[@Undertale-Orange]

Same to be honest

[@AyeJayDeeDIY]

@@Undertale-Orange 😁

[@JakubGajda]

me too

[@Elizabeth_Artist]

​@@AyeJayDeeDIYi been making mask before I found this channel and it has helped a lot! I made them out of cardboard mostly because I had no idea on how to use foam and when I did, it made things better and the mouths were always the hard part, but I agree this made the whole thing a whole lot easier

[@tramnguyen-ep4ey]

Thank you so much for this tutorial! I stumbled onto your channel on accident, and im glad i did.This is also the only yt vid that has actually helped me in making my cosplay. You provide useful information + tips

[@AyeJayDeeDIY]

Thank you so much! And I'm glad you stumbled your way here!! 😁

[@ZaynsUniverse_YT]

HOW DO YOU NOT HAVE AT LEAST 100K SUBS BRO THIS IS AMAZING

[@AyeJayDeeDIY]

Thank you!! And that would be a dream! 😁🙏

[@spencerwhite8891]

Your springtrap looks Absolutely amazing!!! Well done! 😊

[@AyeJayDeeDIY]

Thank you so much! 🙏

[@SuperMarioWowza67]

I’ve only made the rough version of the ears today, but they’re pretty good for being rough. Thanks for the tutorials bro. :)

[@AyeJayDeeDIY]

That's awesome! And of course! Good luck on it, and I'd love to see what it looks like when you're done!

[@SuperMarioWowza67]

@@AyeJayDeeDIY I’ll update you on progress, thanks

[@AyeJayDeeDIY]

@@SuperMarioWowza67 awesome!

[@klutzerni9061]

Huge thank you for this. I made a Springtrap head for crafting class in my university and it turned out very good, my professors and other students loved it :D i plan on continuing the costume and making the body too, so that I can have a full cosplay for a con that's gonna happen in May :)

[@AyeJayDeeDIY]

I'm so happy to hear that! So glad I could help you out! Best of luck on the rest of the costume

[@quinnhollis8766]

This is amazing!! I can’t wait to try and make it. (Really want a cool Halloween costume this year lol)

[@AyeJayDeeDIY]

Thank you!! I hope it helps you out!

[@jax.x1515]

awesome tut! I fr just impulsively ordered everything to make it, and will hopefully have some updates soon!

[@AyeJayDeeDIY]

Thanks! And awesome!

[@Therandomperson_0]

This is my favorite springtrap mask I seen I swear love it man👍

[@AyeJayDeeDIY]

Thank you! 🙏 This means a lot!

[@Therandomperson_0]

@@AyeJayDeeDIY anytime man!

[@AyeJayDeeDIY]

😁

[@justaperson145]

the springtrap head is so fire even though it's on a budget good job!

[@AyeJayDeeDIY]

Thank you!!

[@Tinuhh23]

Thnak you so much for this! My son wants to be this for Halloween and I been overwhelmed these past months looking up ways to make the head. I would come and look it up on here every few weeks. I almost about gave up until today. Thank you so much again for this! ❤

[@AyeJayDeeDIY]

I'm really glad I can help! You're son is going to love it 😁

[@soscemo69]

How mutch time did it take?

[@AyeJayDeeDIY]

@@soscemo69 about 20 hours total in the span of a few days

[@soscemo69]

@@AyeJayDeeDIYThanks for the answer, i want to build this for the FNaF movie. This is the first cosplay i will do for a long time. I got the materials, now the problem is assemnling it, but i know that it's going to be very fun.

[@AyeJayDeeDIY]

@@soscemo69 Hopefully the tutorials will help!

[@yana_s_100]

BRO THIS WAS AMAZING 😭😭 IVE BEEN LOOKING FOR A CHEEP BUT GOOD TUT AND URS WAS PERFECT OMLLLL

[@AyeJayDeeDIY]

Thank you so much!! Glad it can help 😁

[@CaptainSnicks]

Epic springtrap dude! Im trying to make a springtrap suit so i can wear while watching the movie lol, this helps a lot, thanks!

[@AyeJayDeeDIY]

Thank you so much! And that's awesome! You'll have to show me your finished product!

[@CaptainSnicks]

@@AyeJayDeeDIY i certainly will :)

[@AyeJayDeeDIY]

@@CaptainSnicks 😁

[@bluefoxman]

I tryed battingtons tutorial and wow it was hard. This is much easier so thank you so much!

[@JustASpoon23]

Instructions unclear, I’ve been spring locked

[@rubykaylaandogie3334]

Springtrap cosplay: the authentic experience

[@mxtixia]

Omg I needed this so much I already have his full body but I couldn’t find a way to make his head and I’m making this so I can wear it to the theater when the new movie comes out man it’s gonna be great!!

[@AyeJayDeeDIY]

That's awesome! Glad I can help 😁

[@aviously1158]

This was so beyond helpful. Thank you!

[@AyeJayDeeDIY]

Glad I can help 😁

[@kracyndalabombarbe2342]

This is awesome! My nephew wants to be springtrap for halloween this year, and since i make his costumes, this will be very helpful in making it!

[@AyeJayDeeDIY]

Glad I can help! I also have the full body tutorial on my channel that may help 😁

[@jakeandjohnniesupporter]

I wish you had a company and did orders because damn i really need a springtrap costume

[@TobycraftHD1]

So my school does this day where you can come in as ANYTHING, even costumes... I think I know what I'm going as...

[@Walbert50]

This is awesome! I do have a question though, do you have to wrap it in a second layer of PolyFoam or can you just use one roll? Thanks!

[@AyeJayDeeDIY]

You can do one! I prefer to do 2 because it makes it bigger and more durable 😁

[@Mintinus]

@@AyeJayDeeDIY Thanks! This was my alt account.

[@AyeJayDeeDIY]

@@Mintinus 😁

[@Anime-gg3oo]

I couldn’t find any peach colored felt, but I used peach colored foam, the rectangle ones that are $1. I ended up using black and red paint, blending the colors a little bit to make a burnt skin effect.

[@doubleabees6332]

What were the dimensions of the foam you used to do the triangles and such? I’m asking because once I measured my head, there’s a bunch of extra foam going up

[@AyeJayDeeDIY]

Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. Hope this helps 😁

[@redzofia]

I’m gonna make a withered golden Freddy costume, with now knowing the basics, this REALLY helps

[@AyeJayDeeDIY]

Awesome!

[@footyballz525]

Can you give away a Freddy or springtrap mask? I’ve been trying to make mine but they all keep breaking or don’t come out good (thx for the heart even though you got rid of it❤) also keep up the good work your amazing

[@AyeJayDeeDIY]

I would love to! I'll be giving a mask away to one of my subscribers once I pass 1,000 subs. So stay tuned cause you could be the winner 🫢 Also if you'd like to, you can share my channel so that way it's closer to my goal 😁

[@footyballz525]

@@AyeJayDeeDIYok I will ❤

[@footyballz525]

@@AyeJayDeeDIYare the jaws moveable?

[@AyeJayDeeDIY]

@@footyballz525 awesome! Thank you! And thanks for the support! (Also I didn't mean to get rid of the heart, it was an accident haha.) I make sure all my amazing subs get a heart!

[@AyeJayDeeDIY]

@@footyballz525 yep!

[@jevilstail]

I can't believe I'm about to do this. I'm not a crafty person, I only paint and draw. After being a fan for 9 years I finally snapped

[@AaronInVR]

When wrapping the head with a second layer of foam, do you have to do the triangles again? I’m starting my springtrap head today and just wanna make sure ^^

[@AyeJayDeeDIY]

You could either do the triangles, or cut a piece of foam into a circle, mold it on top of the dome on the base layer, and trim the edges

[@AaronInVR]

@@AyeJayDeeDIY thanks so much! Absolutely looking forward to making this springtrap head. It’s gonna be my first time making a costume! 😅

[@AyeJayDeeDIY]

@@AaronInVR awesome!

[@mythical5434]

Man I wish I have the materials required to make this head. Anyways, nice tutorial!

[@AyeJayDeeDIY]

Thank you!!

[@bitterferret]

Your content never fails to be entertaining and impressive!

[@AyeJayDeeDIY]

Thank you so much! This means a lot 😁🙏

[@bitterferret]

@@AyeJayDeeDIY No problem! Also do you think you’ll be making a video on the freddy body? I meant to ask a while ago but totally forgot

[@AyeJayDeeDIY]

@@bitterferret yep I'll be making a full body tutorial! I just gotta acquire some materials. I'll hopefully be done with it by early August 😁

[@bitterferret]

@@AyeJayDeeDIY awesome thanks and good luck making it!

[@AyeJayDeeDIY]

@@bitterferret thank you! 😁

[@Monkey-z5q]

i just finished making my springtrap costume out of cardboard but now im on my chrome book riting the things i need for my new springtrap costume out of foam your video is helping so much and im so happie that you made this video

[@AlbinoGuesty]

Is it possible if you can make suits with the mask as well? It would be awesome!

[@AyeJayDeeDIY]

Definitely someday in the future! It'll take a lot of time and money, but hopefully with the growth of this channel, I can make it happen 😁

[@Tails_and_Luigi101]

My brother wants to have a Springtrap cosplay and it’s turning out great thanks to your tutorial!

[@AyeJayDeeDIY]

Glad I can help 😁

[@Kitty_noodles]

I’m gonna impress my friends on Halloween bc they said they didn’t wanna match with me :(

[@Crap_animations]

The tuto is perfect and so helpful thanks you so much❤

[@AyeJayDeeDIY]

Glad I can help!

[@Crap_animations]

5:28 how many do we need? (Im mot sure)

[@JuElcock]

Hey! Looks amazing! What are the measurements for the triangles on the foam at the start? 🙏🏻

[@AyeJayDeeDIY]

Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. Hope this helps 😁

[@pagmoos]

@@AyeJayDeeDIY would the 32 inches you used in your example be the circumference of your head that you measure out at the beginning?

[@JuElcock]

@@AyeJayDeeDIYthankyou 🙏🏻🙂

[@stellatiko5727]

you are so creative you know your the most creative person i know anyone i know who is creative DOES NOT come close to you ❤‍🔥❤‍🔥❤‍🔥❤‍🔥🔥

[@AyeJayDeeDIY]

Thank you so much 🙏🙏

[@Sharp22CatFish]

I have seriously no idea why I sit down and watch these videos even though I don't even make any of them

[@Hectortheman]

I am going to make a springbonnie mask for fnaf movie and halloween so this helped alot thqnk you❤️

[@AyeJayDeeDIY]

Awesome! Glad I can help 😁

[@critterace]

dude this is sickk!!!! how long did this take you?

[@AyeJayDeeDIY]

Thank you! About 20 hours in the span of a few days

[@critterace]

@@AyeJayDeeDIY damn, im making a foxy cosplay and its taking MONTHS because of school

[@AyeJayDeeDIY]

@@critterace I definitely relate. I just started college and I also have work. I wish I could make this a full time thing

[@TheThirdSparrow]

You're So Talented

[@AyeJayDeeDIY]

Thank you so much!

[@hi_dom]

not sure when i'll be able to but i'm definitely gonna use your tutorials as a reference for a cosplay of movie springtrap

[@AyeJayDeeDIY]

Awesome!

[@accountdeleted-v5g]

BRO!!! ur actually getting popular!!! u got 2.2k views on a vid!!! yooo good job dudeeee

[@AyeJayDeeDIY]

Thank you!!! I might get 500 subs by the end of the week at this rate! 😁🙏

[@distorted_tsukasa]

Thank you I needed this I can’t wait to start working on mine!

[@AyeJayDeeDIY]

Awesome!

[@enderkill5558]

the video helped me soo much thanks to you ,and , I ALWAYS COME BACK.

[@AyeJayDeeDIY]

Glad I can help 😁

[@loki_dripdrop]

Bro I’m going to watch all of them because I’m planing on making my own Fnaf movie with my friends

[@LeoNokia]

Hey just wondering can you tell me all the materials i need please also great video

[@AyeJayDeeDIY]

Check the description 😁

[@mason_tm]

We followed your videos and made Springtrap for Halloween, got lots of compliments, thank you! (not as good as yours but not bad for a first attempt)

[@AyeJayDeeDIY]

That's amazing! I'm really glad the tutorials helped 🙏

[@mason_tm]

@@AyeJayDeeDIY kzbin.infouLT1n7rfMoc

[@AyeJayDeeDIY]

​@@mason_tmI love it!

[@Oguneditz]

thanks finally ı can make my self a mask

[@AyeJayDeeDIY]

Awesome!! It's gonna turn out great!

[@joannakownacka4966]

I'd like to thank you for inspiration and help. I made mine based on yours and my son loves it

[@AyeJayDeeDIY]

I'm happy to hear that!

[@UltimateFighterEggman]

Just won my costume contest too, THANKS!

[@AyeJayDeeDIY]

Congratulations!

[@Just_latte99]

I’m being springtrap for Halloween so this is helping me my lil sis wants me to me to maker her a Bonnie mask so

[@akosmakos112]

This video is so helpful thanks🙂

[@i-be-chillen]

this is better then the fnaf suits in the movie

[@AyeJayDeeDIY]

🙏

[@oldchannel5]

THX SO MUCHHHH PERFECT FOR MY FNAF HALLOWEEN COSPLAY

[@AyeJayDeeDIY]

Glad I can help 😁

[@carpetthemoonele1312]

Im doing something similar with cardboard and this helped a lot!

[@AyeJayDeeDIY]

😁

[@tobiascedarwastaken1456]

Is there a full material/tools list? I want the links to all the things u have to buy and have so that I can make this thing fr! This is so amazing. Tysm for you hard work on this vid

[@tobiascedarwastaken1456]

I hope you respond!

[@AyeJayDeeDIY]

It's in the description 😁

[@carlaprince3516]

Honestly using this method for withered Bonnie when ever I get in lazy

[@ksj2936]

I really like how your mask turned out ❤ just one question, was there a step after applying the 2nd foam layer? Because how did you make the nose/snout on the foam?

[@ksj2936]

This happens between 1:01 - 1:03 , there appears to be a nose and i cant figure out how to make that

[@AyeJayDeeDIY]

You mean the muzzle? All I did was stack a few layers of foam, hot glue them, and trim it to shape. Super simple

[@callie2917]

Thanks for inspiring me 😁😁😁

[@AyeJayDeeDIY]

Glad I can inspire you 😁

[@susdroid8169]

Dude, this is just amazing

[@AyeJayDeeDIY]

Thank you!

[@Game_Hunter-oc2mj]

can see when you put it on and btw it looks so dam cool

[@AyeJayDeeDIY]

Yes, and thanks 🙏

[@henrytoledo8509]

OOOOOOOOOOOHHHHH WHAAAT THEEE HEEELLLLLL Look at the curvature of his back in the beginning, he be bending 150° golly

[@AyeJayDeeDIY]

😭😭

[@mikozzo7977]

Hey, beautiful mask! But I have a question: do you see through these eyes or you use another pair of eyes that has an hole? I wanted to try doing a mask and your videos are helping so much! So thanks a lot!

[@AyeJayDeeDIY]

I answered all your questions in the description 😉

[@mikozzo7977]

​@@AyeJayDeeDIY Oh thanks for replying my comment! I didn't know you did, so sorry for seeing it only now. Anyways thank you, you're inspiring me for that mask!

[@ambergilbert1960]

this is going to help me with spring bonnie thank you

[@AyeJayDeeDIY]

Glad I can help 😁

[@bananabrainzz]

going to make this :).. I will be posting it on my account in 2 weeks or so, wish me luck

[@AyeJayDeeDIY]

Best of luck!

[@risefingerboard515]

1) its going great, this is the best springtrap head tutorial ever! (Other tha the one daregularsauce made, but im not rich) 2) do you use elastic for the jaw?

[@AyeJayDeeDIY]

I know his is better, thanks for pointing that out 👍 But my goal is to show how to make them while on a budget and as cheap as possible. Because I myself aren't rich either. And yeah add elastic

[@TheRedRingYT]

Epic video man you deserved a like and sub 😎 I saved this to my "Use for future" playlist Ill try to use this tutorial for the springtrap cosplay that im making (Vid in my channel) Also whats the songs that you used?

[@AyeJayDeeDIY]

😁🙌 I don't remember, it's been a while since I made this, sorry

[@meowuch]

I think I'm going to try making this for a con this coming February. How long did the head + suit take to make (you think its possible to finish it before feb 20th?) ? also I got really confused with the second layer of foam part, did you just wrap the whole head with another foam(if so how)? Sorry if this is a bit of a late comment but it would help a lot.

[@AyeJayDeeDIY]

I know the head took 20 hours total, but I don't know about the rest. I didn't work on it as much as I could have because I had work and school. And there really isn't a set time it takes someone to make it, so my time frame won't do you any good. It all comes down to your experience, your effort, and how much time you have to work on it. But I know for a fact it took wayyyy less than 4 months lol so you should be fine. For the foam, it's really simple. All you do is hot glue it onto the base and do the triangle dome thing on the top

[@meowuch]

​@@AyeJayDeeDIY Thank you 🙏

[@daniasyed]

comic con coming in a month or so lets see if i can atleast get the head made wooo! wish me luck

[@daniasyed]

Didn't make it last year but I'm back again and this time I got the materials mujahhaahh I WILL MAKE THIS

[@sadekfatima3122]

You shoud be hired for the fnaf movie 2!

[@AyeJayDeeDIY]

That'd be a dream!

[@bungler433]

this gave me a wacky idea make fursuits but they have springlock contraptions inside it and you dont tell the customers

[@catto6895]

This is amazing! ❤ You inspired me to make my own! I was just wondering how you did the top of the head? I know you glued the triangles all together but it looks a little different after you cut the 2nd layer. Did the 2nd layer also go over the top too? Hope that makes sense! 😅

[@AyeJayDeeDIY]

Yep the second layer goes over the top 😁

[@catto6895]

@@AyeJayDeeDIY cool, thank you! Is this what gives it the dome shape? I was trying to figure out how it went from square to round 😆

[@Mello673]

I'm gonna make it NOW!!

[@bryanccolque3508]

Amazing friend, I really liked it, so much that I want to try to do it myself. How long did it take you to make the head of the springtrap?

[@AyeJayDeeDIY]

Thank you! It took about 20 hours total in a span of a few days

[@Jevo-12]

super cool imma try and make this

[@AyeJayDeeDIY]

Awesome!

[@casieljimenezramos294]

Dude, thats amazing My question: You can see from the mouth or where you put holes to see?

[@AyeJayDeeDIY]

Thank you 🙏 And I've answered this question quite a bit in the comments, and it is also stated in the description 😁

[@Yourlocalpenguinenthusiast]

Wow, you are very talented

[@AyeJayDeeDIY]

Thank you!

[@maxmt4325]

Awesome work. So when you say you did two layers are they the same size or is that second layer slightly bigger?

[@AyeJayDeeDIY]

Well the second layer has to be slightly bigger so it can fit over it

[@PDartmaster2011]

dang I'm an eleven yr old that made a spring trap head with this! thanks!

[@AyeJayDeeDIY]

Glad I can help 😁

[@RelexIDK]

BRO ME AND MY DAD R STRESSED MAKING THE HEAD SHAPE. I have five questions 1. What are the dimensions for the triangles because when we try it some are too big or too small to perfectly cover the entire roof of your head 2. How many triangles should there be to fit the roof perfectly 3. How do you draw springtrap’s face so perfectly like how big is his eyes or how close is his nose to his eyes 4. Is the head and bottom jaw separate because our head looks too skinny and tall for it to be Springtrap’s whole head. So should we cut off the bottom half? 5. How do you make the nose to stick out

[@AyeJayDeeDIY]

Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. All you do is use a marker and draw his face 🤷 There isn't anything special to that. I free handed it. The eyes are the size of the diameter of the ornaments. Draw the eyes first based on where your eyes are. For the last questions: Yes... As shown in the video I make a top half of the head and make the jaw separate. I show how I connected them by using a hinge mechanism with brad pins. Make sure to watch the whole video because it's shown there. Do you mean the nose or the muzzle? I show how I made the nose in the video. But if you are referring to the muzzle, just hot glue a couple pieces of foam together, sketch out the shape, and trim the excess foam off

[@Konnorthe_megalomaniac]

This might be helpful thanks dude!

[@maniandbari8400]

Hey AyeJayDee: How are you, I pray well. Hey quick question, will you be putting out a video on how to make the Spring Trap hands. I thank you for your time.

[@AyeJayDeeDIY]

I actually followed the tutorials by Da Regular Sauce and Axestil. They both made amazing hand tutorials! So I recommend watching those! 😁

[@BRONZEZENN0X]

I have a queston, How does the moving jaw work? Beautiful work btw!

[@AyeJayDeeDIY]

I have that included in the tutorial 😁 I explained it a little better in my most recent video, the part 4 on Foxy 😁

[@BRONZEZENN0X]

@@AyeJayDeeDIY Thanks.

[@Muichiro-Idk-r9d]

Thanks! i will buy the stuff and make it!

[@sabrinaneely2961]

I want to make the mask and put it on a pumpkin for my college's pumpkin decorating contest

[@AyeJayDeeDIY]

Nice!

[@The_vrbear]

are you able to list all the supplies so it just takes me one trip to the store? also is there anywhere specific in could get that foam and how big and thick i should get it *also are you able to see out of the helmet and how?

[@AyeJayDeeDIY]

All that information is available to you in the description. Make sure to check there 😉

[@risefingerboard515]

Sorry to ask again, but i meant how do you glue the 2nd layer on since its a dome? Is it two pieces, or do you just put it on in one piece? Because that would leave empty space. Thanks again!

[@AyeJayDeeDIY]

You hot glue it on all while rolling it. You're rolling another sheet of foam on top of the existing base, adhering it with hot glue

[@Katoothekat]

Ima try to make this so I can do a cosplay! :)

[@AyeJayDeeDIY]

Awesome!

[@Ash.skates24.7]

Honestly you make it look so easy I’m only able to do the helmet part rn and some how it’s tight

[@AyeJayDeeDIY]

Make sure before you start, you wrap the foam around your head to make sure it isn't too loose and not too tight. It'll take some patience and time 😁

[@Ash.skates24.7]

@@AyeJayDeeDIY I did wrap it the we put the second layer on then it got all tight

[@Ash.skates24.7]

@@AyeJayDeeDIY is it extremely important to have the second layer???

[@Ash.skates24.7]

@@AyeJayDeeDIY pleaaaaase say it’s not

[@AyeJayDeeDIY]

@@Ash.skates24.7 not extremely important, just depends on how big you want your head

[@JakubGajda]

I wasn't doing a springtrap costume but springbonnies but still this tutorial really helpted me, especially with the head, thank you😍🤩😀

[@AyeJayDeeDIY]

That's awesome!! Glad it can help 😁

[@frownedmeal]

This is really helpful thank you so much! Although I do have one question, how ere you able to wrap the second layer of foam on the head? did u follow the same process that u did for the first layer? Sorry if this might be super obvious but I just want to make sure im doing everything right. Thank you so much again for this very helpful tutorial!

[@AyeJayDeeDIY]

Thank you! And all I did was roll and hot glue the second layer on, trim the excess foam off, and do the triangle method on top again 😁

[@frownedmeal]

Thank you so much for clearing this up! You've really helped my cosplay journey:)

[@AyeJayDeeDIY]

😁

[@dehunt2107]

Hello, awesome tutorial and great helmet. I have a question if i may. When cutting the fabric to place over the helmet just wanted to clarify that you used two peices from you duck tape stencil correct? Thanks in advance.

[@AyeJayDeeDIY]

I just made a stencil from half of the head, and would just flip it when tracing it on the fabric

[@dehunt2107]

Thanks for the fast response.

[@AyeJayDeeDIY]

Of course 😁