HOW TO MAKE A SWINGING STICKS - DIY Swinging Sticks

[@markpeacock1164]

I tried to make this circuit but it did not work, I don't know what I done wrong. The Led is on all the time and the pendulum won't work. Can you please help me?

[@devscraptoarts414]

if your connection is correct, there is a possibility that the problem is with your potentiometer. try turning it little by little until the led turns off.

[@markpeacock1164]

Thanks for replying. I did what you said and it’s working but not enough power to push the magnet all the way I couldn’t find capacitor 3300uf and I used 2200uf, do you think it is a problem? The transistors are getting really hot

[@devscraptoarts414]

2200uf can also be used. as for the weak push of the coil, try adding a magnet to the stick to make the push of the magnet coil stronger.If the transistor heats up, the LED may be ON for a long time. so it is possible for the transistor to overheat. I hope it helped.. tnx!

[@horsepower7292]

Tienes que utilizar rodamientos o no te va a funcionar nunca

[@nenejanechannel6229]

ang galing m nman po ang galing ng inventions mo

[@jorinelastrado2243]

What a skill! Supported from Jorine Lastrado

[@MariaDuran-r7j]

This is cool. Love your work indeed.i'm really into this swinging stick these days.

[@devscraptoarts414]

Glad you enjoy it!

[@bide2505]

​an you list the parts of the electronics with time stamps please? It will be helpful

[@MariaRador]

amazing idea,

[@Poper-st2lo]

this is a good DIY at home, fun activity...

[@TigerDela]

The best among diy swingong stick project.

[@azelbeybtv2191]

Galing naman nito .. keep it up kuya

[@boykamutivlog8616]

Idol nice vlog ang galing naman full support idol

[@Cooking-l6y]

Thanks for sharing❤❤

[@dnaloroishi1676]

Wow! 4K pesos pa sa shopee ito ah! gayahin ko nga!. nice one lodz...

[@Cooking-l6y]

Thanks for sharing ideas!!!

[@mohamedbarakate905]

❤❤❤ bravo ❤❤❤

[@marcvergara5322]

Ang galing naman lods

[@mhingankar2]

Awesome. 🎉

[@chiitogii9572]

ang galing

[@whitenoisestudios5924]

Ang husay!

[@Verlan-h6y]

Amazing works!!

[@ategingtv3989]

Ang ganda ng content nyo sir

[@ronaldsalvador2800]

Galing pare ko ❤

[@AdventureswithHermie]

Please upload more content idol! Keep it up!

[@MarinaSanyo-j6i]

Brilliant video❤❤

[@ashleyb3078]

Awesome effort there dude. It works, and it works well. Eleven out of ten for effort and work-ability👍👍

[@jobbiecabarga8516]

Interesting video

[@mj6749]

I've seen some dodgy KZbin builds but, yours is up there wth the best of them.

[@TheUnvarnishedTruth-]

*Dodgy... That was such a polite way of saying it!* *Still, he gets an A for effort!* *An excellent example of how to never solder any kind of circuit together! You give new meaning to the term down and dirty!* *In all seriousness though, at least it works!*

[@frankcastro_7K]

Great skill

[@Gorlon-he2ot]

Nice video❤

[@TheUnvarnishedTruth-]

*Amazingly "down and dirty" build! But it does work! Well done!*

[@masterbuts4374]

Great!

[@mariahpangilinan8548]

Wow! Amazing talent!

[@genuinediasporan]

Beautiful❤❤❤❤

[@travellinggeorge6551]

Talented

[@carlopittini7958]

Unfortunately this doesnt work for long. The swing turns into a rotation and it rotats and rotats. I've done some similar a couiple of years ago. Then I looked at the original electronics, and thats a very more complex circuit with Op-Amps and direction detection coils. I gave up then, because I cant read the values at the electronice, so reverse engeneering was not really possible.

[@BenBenkc]

It works if you fine tune the output voltage also the sticks need to be balanced. Spinning like a wheel because your out put is too strong.

[@bide2505]

Can you please tell me tge electronics involved with time stamps ?? It will be of great help for an aspiring engi :)

[@horsepower7292]

Sino utilizas rodamientos no te va a funcionar nunca

[@swapannandy15]

What are the exact cutting dimension of each compononents .

[@bide2505]

How did u attach the ball bearing??

[@felipegomes8158]

Show acho que agora o meu sai com certeza parabens

[@Gareldhistorytv.]

Please can u please send the schematic diagram and size of the rod it well very useful for mei,m trying to make one but nothing achieved.

[@dondela-o6g]

Could it work without battery and only a magnet?

[@bide2505]

No it will die down

[@itchygordz3374]

wowww

[@dagstv2489]

Galing namn lods saka ayus Yan grinder mo lods ahh San ba Yan nabibili🤔

[@VivekKumar-eb3zx]

Sir how much dia wire is required for making the coil?

[@kabizdaktvbypalz5458]

San mo ba nabili grinder na Yan lods,at bibili din Ako nyan hehe

[@alfonsoscarpulla-xo9nj]

DI GRANDE EFFETTO!-O.K.

[@АндрейАндрей-р6у]

I do it, i win it!

[@phdup3721]

Nice effort... Hi there, this build will just never work like the original as it is missing very important magnets in both small and long arms... It will only ends spinning like a ventilator. Also, the build is not precise enough (mainly in weight proportions) to offer a smooth movement that could look like a perpetual movement.

[@felipegomes8158]

você vende show passa esquema da medição da armação

[@reginaward8092]

*Bravo*

[@arnoldtubid]

Circuit diagram please and tell me the name of parts used.

[@JorgealvesAlves-dm8rz]

Você vende

[@NisiaFreitas]

Passa esquema pra mim montar um

[@felipegomes8158]

Passa esquema pra nós sou doido pra fazer um

[@fredcabor5258]

Where is the schematics?

[@indyrevoly3060]

lol why did you put a circuit in this. the whole point is that the structure does wild things on its own

[@KolMan2000]

The official product uses a very similar circuit. It’s not just free spinning machine

[@علیآلبوعباد]

Hello I designed the complete circuit as you said, is it possible to communicate with you? Send me a picture of my device and tell me the problem🙏🙏🙏🙏

[@muktarulislam4654]

this circut is wrong. I was make it but it did not work.So please dont try to make it

[@redgum1340]

This is complete BS, forget it.

[@annumina7102]

Hi guys.... don't waste your time and money ....bcz this concept which is use by this person is totally wrong. If you want to make this swinging stick pendulum you need 3 copper coil. Two sensory coil and one kick coil .And auto circuit polarity changing IC and no need of any capacitor and LED. And 😂 this swinging sticks video is a reverse slowing video ,which is started by hand and slow end automatically but here is edited by Reverse video editing.

[@devscraptoarts414]

This is a DIY project which means time & effort are used with less money expense... Simply created at home by an ordinary person with accurate knowledge that the viewers may possibly do it also by themselves or may enhance it according to the extent of their knowdlege & skills.. thanks anyway

[@user-artanis]

هل يمكنك مساعدتي بشرح وافي لو سمحت اخي وشكرا

[@АндрейАндрей-р6у]

Working with one coil for al long time, but one month left for all ajustments...

[@rajujoseph4740]

It's better to buy, In your next video add some voice no problem even it's horrible.