How to make a traditional Macedonian KAVAL PVC pipe / Musical instrument DIY for FUN

[@overtonefinds6385]

"If you want to have some of these dimensions you will have to pay for them" don't worry bro I'll figure them out by myself, whenever I drill a hole in a wrong position, I'll tape it and drill a new one. Peace

[@calebmerryman8398]

I didn’t know the Macedonians invented the pvp pipe that’s awesome

[@georgijordanov3454]

Thy have invented everything. God, the universe, the solar system, our planet Earth and every nation in it.

[@strahinjarasic5667]

Na koji razmak stavljaš rupe? I koliko od kraja?

[@robbysaputra7253]

do you have measurement for that flute can yu share to me please

[@martinharris5017]

Read header "you will have to pay for them

[@teodor91b]

How you blowing in this kaval! I was made my own plastic pipe...kaval...and the sound doesn't work...!!! I was tried all positions ....and I was tried to mentain on the half on the lips...! but the sound doesn't work constantly!!

[@MrDKDIY]

You need a lot of exercise, I got the first sound in two weeks ...

[@teodor91b]

@@MrDKDIY ....I can just to blow...in my pvc kaval....but the holes doesn't work. I think that I was wrong with the measures of holes....

[@teodor91b]

@@MrDKDIY I was tried many times...but the pipe is not good...is large....and that is the sound is doesn't work! I was respected the angle 45° wich there I must to hold at lips ...! I was made another kaval with 5 holes but is from.copper.pipe is sound like macedonian kaval!

[@teodor91b]

@@MrDKDIY today I was practice at my copper pipe kaval. I was used a tiny pipe copper and I was drilled just 5 holes like romanian kaval. I was learned how to blow in the pipe and it is very cool. My own version of kaval is sound like macedonian kaval! 😁🇷🇴🇲🇰🇲🇰🇲🇰! 😁Salute from Romania!

[@teodor91b]

@@MrDKDIY now 55 minutes i was learned to blow on my plastic pvc flute,wich is shupelika with six holes! It sound like sheperd's flute! Tomorrow I will looking for another piece of pvc pipe wich most to have around 90 cm! I will make my own version of kaval!!

[@ПеткоКиряков-ш4е]

Колко е дълга тръбата и на колко сантиметра са дупките ?

[@volvagianintendo6465]

Mr. DK DIY, which is the INSIDE bore diameter of this Macedonian kaval? And the thickness of the wall?

[@MrDKDIY]

diameter 16mm

[@mirsa824]

A na koji fazon svira

[@rodolfocappelli4643]

sorry what is the distance between the hole of the flute? :)

[@miroslavjosic5162]

Izvini sto smetam ali kako se svira

[@uproardaegan9792]

Realiy like the flute but what are the measurements between the holes? If u reply i would appreciate it!!

[@MrDKDIY]

I have all the dimensions for all flutes A, H, C Cis D ... please write your email to contact us ...

[@silentday404]

wee drah please, could you tell me the measurements?

[@ahmadsieny3829]

Can you please tell me the measurements. thanks in advance.

[@hai-la-joc3777]

@@weedrah7970 I just made a 635 mm long one, in D ( I found the measurements online ), but I see this has 760mm, could you please send me the measurements ? Thanks !

[@verticaltankz5942]

@@hai-la-joc3777 can you please send me the measurements? :)

[@KikiKiki-rs5vl]

Secret measurements, shame!

[@hajrizseferi2107]

Molim za rupe pomoc kako dage izmerim

[@HQHQHQHQHQHQHQHQHQHQHQHQHQHQHQ]

I think measurements are somewhere on the internet, just need to look better...

[@nimo201]

what the mesure betwen the trous

[@overtonefinds6385]

search shakutool on jeremy.org

[@lanceshaker5807]

What kind of pipe are you using

[@MrDKDIY]

I USE PLASTIC TUBE FOR INSTALLATION OF WATER 16mm OPEN

[@lanceshaker5807]

Mr. DK DIY Thanks!

[@MrDKDIY]

NO PROMLEM !!!

[@lanceshaker5807]

Hey it's me again. What are the measurements for the hole positions.

[@rallezam]

Ne ke da mislav so pvc ke slusase ko isto

[@PHARAOHTEZZERAKT]

Svaka cast majstore

[@NK-lj6ry]

Bravo

[@Instrumentosalternativos]

Got my like and subscribed. Congratulations!!!

[@dimitarmanevski5320]

BRAVO!!!

[@MrDKDIY]

Dimitar Manevski fala brat

[@saskopetrov7671]

Многу сиромашно брате.Малку поопширно ништо од ова видео.Објасни колку е долга цевката и далечината на дупките тогаш ке биде добро.Благодарам

[@DeoCardiNusantara]

good

[@fs17macedonia21]

Covek sviram kaval dve godini i ne mi e jasno kako sviris na toa

[@MrDKDIY]

😁😁😉👍

[@PavleDelumcev]

What is the distance from the holes?

[@HQHQHQHQHQHQHQHQHQHQHQHQHQHQHQ]

Find on the internet! This dude sells dimensions (accordingly to people comments).

[@robabnawaz]

f a n t a s t i c

[@mdsopon6204]

Give our all majorment bro

[@zlatko6846]

bravo maestro

[@MrDKDIY]

Fala ...>>> :)

[@ПеткоКиряков-ш4е]

Молам те казувай ми и сакам си направим !

[@zlatko6846]

original macedonian kaval

[@HQHQHQHQHQHQHQHQHQHQHQHQHQHQHQ]

Yes... lol hahaha So macedonians invented a PVC pipe?! lol

[@TheKarmadavis]

Y las medidas??

[@alejandromojino9786]

les mesures coco:) ce serait mieux

[@alexandrezacon726]

Il parait qu'il faut payer pour les avoir 🤦🏼‍♂️

[@LeChatNoir2022]

ou chercher sur internet les formules mathématiques qui mettent en rapport la fréquence d'une note, le diamètre du tube et sa longueur dans le tuyau... Ha oui et un peu d'instinct aussi...

[@Rehankhan-co9pl]

local

[@titodejesus6238]

I gave you thumbs up, but man the sound really SUCKS!

[@MrDKDIY]

👍😉

[@petkuvasilef1014]

Haha macedonian . Its a BULGARIAN tradicional instrument :)

[@MrDKDIY]

+Petku Vasilef no this is MACEDONIAN TRADITIONAL KAVAL

[@petkuvasilef1014]

Mr. DK DIY хаха ок .

[@volvagianintendo6465]

There are several kinds of kaval flutes: the Macedonian, the Bulgarian, the Romanian, the Moldavian , and the Turkish. The Romanian, the Moldavian and the Turkish are flutes with fipple, and the Macedonian and the Bulgarian are end-blown flutes.

[@blackadder1348]

Volvagia Nintendo 64 , pls note - the same type of Kavalas in Macedonia is played in Southern Serbia , Kosovo and Albania .. music and instruments - do not know the borders, specially not in ancient times ..

[@tzvetkov4784]

There is also a Serbian one =)