How To Make A Water Level For Less Than Ten Dollars

www.homebuildin... Click on this link if you're interested in learning more about building foundation repairs, new home construction and architectural design. This video will provide with a method that can be used to construct a water level out of clear plastic tubing and water. Water levels can be used to check a variety of different parts of a building to see whether or not it's flat and level.

[@gregvancom]

I made another video that will provide you with instructions on how to use a water level to see if your building foundation is level and here's the link. kzbin.info/www/bejne/aavYi2ulqcmHqdE

[@NZCurmudgeon]

Water levels are wonderful! I've used them mostly outside to cover long distances. They're great for marking level across retaining wall posts.

[@gregvancom]

I've used them for years with great success and will continue to use them. That is until there's no more water or plastic tubing :)

[@jaydenritchie1992]

its always level and accurate, if you have drama with surface tension sticking to the walls of the tubing add ethanol to make the water more slippery. a dumpy or laser level does not compensate for the curvature of the earth

[@wizengy]

This water level is too dependent on volume in the tube. If it has too many bends in it the level will change. Both ends will be level but you need to keep checking to see if the reference level is still correct. To get around this, use a big water source at the reference. I use a gallon milk jug half way filled on a chair about 2 feet off the floor and 1/4" tubing. I siphon water out to fill the tubing. A 1/4" circle is very small compared to the top surface of the milk jug so a few bends in the tubing will not affect the surface level of the jug much. I then tape the other end to a yard stick and measure at the reference and then it is easy to measure the floor level anywhere you can reach. Like another commenter said, put a few drops of detergent in to kill surface tension.

[@gregvancom]

Thanks for the excellent ideas.

[@rorycubaking9572]

Yes that way is how my dad taught me, its much easier.

[@supmofo7538]

Make a video

[@MrMemnok]

I utilize and enjoy your videos. Thank you

[@ManishManish-fh9in]

Thanks you sir

[@Straycurrent]

Nice demonstration. Thanks.

[@gregvancom]

You're welcome and thanks for watching our videos.

[@rudzaninembudani4935]

How do I use it to dump the level,, for ceiling installation for instance..

[@gregvancom]

See if this helps kzbin.info/www/bejne/aavYi2ulqcmHqdE

[@franklinarguedas4832]

Have you come across a UV light resistant clear hose? Most of the PVC "Flex GP70, clear or transparent hoses I have used, after a few weeks become difficult to read and must be discarded, this is a waste of money in having to replace them so often. Any ideas how to remedy the problem? Regards, Franco

[@gregvancom]

No, I haven't ran into this problem. I use the water level, then place it back in my tool box. Let us know if you find something that solves your problems.

[@tylerwatson3651]

Next time redo the shot or edit better so you dont have to hold tour tape out of plumb to get the measurement you wanted...or show the slight difference, proving how accurate water levels can be

[@keepnatureclean880]

After you put water into the plastic tube you need to put your finger on top before you get out the tube. So no air comes in and the water will stay in the tube it's called vacuum

[@gregvancom]

Absolutely!!

[@irishcreamliquor]

Shweet vid man

[@gregvancom]

Glad you liked it and thanks for commenting.

[@rsleitner]

Do you need to put a drop or two of detergent in the water to break the surface tension so the edges of the water doesn't curve up the sides of the tube? What about dye or food coloring in the water for better visibility. I have a inches of water U manometer for measuring vacumn that used a dye mixed with distilled water to make it easier to read. Is a water level practical in a completed house where you can't measure to the sub floor because of carpet, tile, motar bed, hardwood floor thickness, etc. Would you need to do this under the house in the crawl space. Thanks

[@gregvancom]

I've never used any detergents and food dye would be a great idea for improved visibility. Water levels are extremely accurate, as long as there aren't any air bubbles in the tubing. They can be used in a variety of different situations, including inside and outside of the home. Obviously you wouldn't want to spill any water on the hardwood floors.

[@snokful]

Can't you just fill up the tube quickly and bubble free by siphoning, ie dropping one end low, and having the other end quite high and in a relatively shallow water container? Let gravity do the work. Once water comes running out low end, can clamp it mid-stream.

[@gregvancom]

Good idea.

[@bradhaenitsch1145]

They work great for scaffold work you know drop cieliengs

[@bradhaenitsch1145]

And framing furr downs

[@gregvancom]

I like it.

[@alexc5369]

Hi wouldn't this just water level just match the curvature of the earth and not truly be flat?

[@gregvancom]

It doesn't seem to be a problem when working with 100 foot intervals, but could be a problem if you were working in miles.

[@ShmeegleSon]

Earth is flat

[@snokful]

lmao backyard construction doesn't use or need physics-level modelling or accuracy. Are you going to consider the curvature of space-time as well? Let's talk meniscus, friction, differential water pressure, etc etc

[@alexc5369]

@@snokful 😂😂😂. Edit: fully forgot about this comment haha

[@FlyingSolo77]

Your example is of using the water level is not a very good one. Remember the water level is quite long. A better use would be to put one end on a wall marking the level and then work around the room with the other end marking the levels. From there you can establish control lines that are perfectly level.

[@gregvancom]

I made another video that will provide you with instructions on how to use a water level to see if your building foundation is level and here's the link. kzbin.info/www/bejne/aavYi2ulqcmHqdE

[@horizontarn]

What’s the maximum length you can have a water level go over?

[@gregvancom]

Maybe 100 feet, but I don't see why it couldn't be longer. I don't know enough about the science to provide you with an answer.

[@horizontarn]

@@gregvancom I would say a water level would work over a infinite length Personally..👍

[@flipflat4814]

@@horizontarn How don't people see the problem here 😁. 🎵But the fool on the hill Sees the sun going down And the eyes in his head See the world spinning round And nobody seems to like him They can tell what he wants to do And he never shows his feelings But the fool on the hill Sees the sun going down And the eyes in his head See the world spinning round😎👍.

[@horizontarn]

@@flipflat4814 🤣🤣 I don’t know why people don’t see the problem... I don’t have a problem and by your name.. I’m guessing you don’t have a problem also?🤷‍♂️. But people don’t put 2 and 2 together...! It’s called cognitive dissonance 👍🤭

[@flipflat4814]

@@horizontarn Same team brother ______ & stationary! Cognitive dissonance was a huge hurdle for me, and i was 1/2 awake beforehand. Some people will never rollover on a core belief. I happen to live near lake Ontario and Erie in NY, and see 300 foot buildings over 36 miles away 😁. Anyway have a good one, and keep dropping seeds one of them is bound to sprout!

[@darshanalehragaga5283]

This pipe 's price pr meter is ?? Please reply 🙏🙏

[@gregvancom]

I would contact your local building supply store for more information or online retailers.

[@jrandall5736]

Add some food coloring to water

[@gregvancom]

That's another great idea.

[@earldtruemusic]

Try use gasoline or color the water

[@gregvancom]

No gas, someone could get hurt, but colored water is a good choice.

[@mattferrigno9750]

Less than $10 dollars...? You can buy a level for 3 bucks at harbor freight.

[@Sirfev2010]

ha

[@kenren1583]

what is the size of the tube you use?

[@gregvancom]

You can use any size tubing, as long as the water line is visible and there aren't any air bubbles in the line. I believe they actually have an attachment that will attach to the garden hose if that's something that might be more helpful.

[@EMILCAT7]

Your title should have been "for less than $10 or at MOST $50"

[@gregvancom]

I will change it, I was trying to be funny, but you're absolutely right. Thank you.

[@jamessori7156]

You did not make it, you bought it

[@gregvancom]

I had to put water in it:)

[@NuestroDegollado]

Ive seen them used in Mexico.

[@gregvancom]

I've use them on a variety different projects and they work great.

[@ManojKumar-je8su]

Saaf karne ki vidhi