How to make a Waterfall Valance Pattern

[@drummergrrlcass7955]

Thank you so much! This was the only tutorial I understood

[@ceceliasdesignworld841]

Your welcome, thanks for watching and commenting.

[@sharifahmdshah2071]

Tq fr sharing dear.. 👍👍😊

[@ceceliasdesignworld841]

your welcome, thank you for watching and for commenting, do come back and watch all the other videos that are on this channel.

[@blu2rain]

I have been searching the internet for a few days to find comprehensive and detailed directions on how to make a waterfall valance. I usually avoid video how-to's like the plague because I don't want to hear someone's life story everytime I want to learn something new. I am so joyous I found your tutorial!! It was clearly stated, concise, well shot, edited beautifully, narrated in a manner that was easy to follow and understand as well as short, sweet and to the point! Thank you!!

[@ceceliasdesignworld841]

Thank you for your comment and thanks for watching 😆

[@annco9801]

Thank you sooooo much for this video.

[@Henrystevenvictoria]

Wow beautiful

[@ceceliasdesignworld841]

Thank you for watching and commenting 😊

[@pats.9043]

Thank you so much Cecelia for this tutorial! It is just what I needed for my living room wimdows👍🏼.

[@ceceliasdesignworld841]

Thank you for your comment and for watching.

[@garonpinnock848]

Thank you very much. Detailed short and spicey love it

[@ceceliasdesignworld841]

Thanks so much for your sweet comment and thanks for watching, do come again and check out the other videos on this channel.

[@D6726]

Thank you so much for this one

[@ceceliasdesignworld841]

You're welcome, thanks for watching and commenting, do come again and check out all the other videos on this channel.

[@joanneG75]

Hi my dear you are heaven sent. I just did this and it was perfect. Easy to understand. God bless you always and keep up the great work

[@ceceliasdesignworld841]

Joanne Joseph Thank you very much for your sweet comment, and thank you for watching, God bless you too.

[@joanneG75]

Hi can you do a tutorial or explain to me how to make a fitted sheet from scratch

[@sumintrajagroop7842]

Thks u very much for explaing it so good i understand it god bless u💝

[@ceceliasdesignworld841]

Thank you so much for your sweet comment, and thanks for watching, do come again and check out the other videos on this channel.

[@simplelivinghomegoods2670]

Thank you! Very informative!

[@ceceliasdesignworld841]

Thank you for watching and for commenting, do come again and check out the other videos on this channel.

[@tristanfanton2320]

Beautiful explanation

[@ceceliasdesignworld841]

Thanks for watching and for your comment, please remember to check out the other videos on this channel, 🎅

[@andrenecollings8089]

Wow, I think even I can do this...gonna try...

[@ceceliasdesignworld841]

You should, and have fun when you're doing it, thanks for watching and commenting.

[@joanneG75]

@@ceceliasdesignworld841 I am wondering if you can do a tutorial on how to make the ascot valance

[@margaretallard3880]

Hi thank you so much for explaining and getting back to me I appreciate it May God continue to bless you

[@ceceliasdesignworld841]

Margaret Allard Your welcome.

[@bethysboutique]

Using this to make valances on a rococo ball gown!

[@ceceliasdesignworld841]

That's really nice, am sure it will look beautify when your finished with it, thanks for watching and for commenting.

[@MichelleOr]

Very clear instructions. Thank you.

[@ceceliasdesignworld841]

Michelle Orlando Your welcome, thanks for watching.

[@thomolicious]

Cecelia, thank you for a detailed tutorial. Many blessings upon you as you continue to share and inspire.

[@ceceliasdesignworld841]

Thank you for your comment and thanks for watching.

[@sundellbabb1870]

Love the idea I will try it

[@ceceliasdesignworld841]

Sundell Babb Thanks for watching.

[@lilynelson1627]

Love this tutorial thks

[@ceceliasdesignworld841]

lily Nelson Thank you for watching and thank you for your comment.

[@teritrinifaithrise7373]

Great work Christmas curtains here i come. Thanks for sharing it was very detailed

[@ceceliasdesignworld841]

Your welcome, thanks for watching.

[@Angelplayhouse123]

Wowwwwwww reallly amazing explain I like it soooooooo much by ❤❤❤❤❤❤❤❤❤

[@ceceliasdesignworld841]

Anisha Kalvani thank you so much for your comment, and thank you for watching.

[@lavernlawrence7740]

Hi , thanks for the video, if I didn't want to push my rods thru the sides, but I wanted pleats instead , at that four inches mark I would just put my pleats on that same side.

[@mc.o364]

Dios bendiga gracias por compartir Saludos desde costa Rica

[@ceceliasdesignworld841]

Thanks for watching.

[@sandravalentine8735]

I want to make different size waterfall valances. What size rod are you using to get this measurement. I have the formula already so I just need to know what size window this is for. Thank you? Great instructions, thank you.

[@ceceliasdesignworld841]

Thanks for watching, I did this one for a 3 feet Window, if your window is bigger you can use 2 of them to make a stile.

[@janellgarcia3693]

I love your video thank you so much. I do have one question...if I wanted the drop to be “deeper” how can I calculate that

[@ceceliasdesignworld841]

Janell Garcia Hi you can get a bigger fabric, say a 80"/80", you can change the 16" to says 24" or even more change the 8" to 16" if using the 24" the 4" marks will always remain the same. The 4" marks are for the rods to go in to. When you Chang this part you will get a deeper fall. To get more fullness you can use the maximum amount of the fabric that's left, remember that any thing you do on one side you have to do on the other side, so start measuring on the open side first because it will be less in lent, do the some to the fold side connect them and finish withe all the other steps. You will end up with a bigger valance.

[@ceceh30]

Beautiful 😍

[@ceceliasdesignworld841]

Christal Houston thanks for watching.

[@Vero15080]

Very clear instructions.. Thank you...Is this measurement can work for any windows?

[@ceceliasdesignworld841]

Hi. Yes the measurements con be used, but you can adjust the 28" to make the fall of it longer and also you can change the 8" to make the fall on the inside of it wider and deeper, so you can have a bigger space in between it.

[@gracefavourite6550]

Very nice

[@ceceliasdesignworld841]

Grace Favourite thank you for watching.

[@نهيمحمد-ذ3خ]

Wonderful

[@ceceliasdesignworld841]

Thank you.

[@lilynelson1627]

Hi mrn , could I make this pattern smaller or 60×60 is standerd size do one nw, need ans pls

[@ceceliasdesignworld841]

lily Nelson Hi, good night, you can make yours smaller by cutting down the measurement on both sides, so you can take of 10" or 15", you do the same to both sides, and then follow the steps on the video, you can cut the 8" to 7" if you want to Chang the inside part as well.

[@lilynelson1627]

@@ceceliasdesignworld841 thk you hun🥰

[@susanali9135]

hi cecelia Susan from Trinidad do u cut d waterfall valance on d bias n if so how my h material is needed

[@ceceliasdesignworld841]

Hi, it you follow the video then you will be cutting more or less on the bias, and one of this type of valance pattern take about 60''/60'' Fabric. after making the pattern you can cut it any way you want. You dont have to cut on the bias, it is just easier to make the pattern on the bias, but you can place the pattern any way you want to put it on your fabric when your going to cut. Once you have a pattern to work with it will take less fabric, so a pattern like this will take about 32''' so a yard of fabric should do it.

[@guynorth3277]

I was looking for instructions for curtain with actual water.

[@madhutyagi9696]

very very nice

[@ceceliasdesignworld841]

Thank you.

[@dionnelewis92]

Hey good job but do i need to sew the top and bottom edges also

[@ceceliasdesignworld841]

Hi, thanks for watching, you will need to sew the top and bottom for yours. remember that this one is just the pattern.

[@dionnelewis92]

Ok thanks

[@susanali9135]

hi I understand one thing I want to no d swag u cut with d ziz zag edges did u cut it on d bias I saw u cut d pattern but i did not see if u cut it on d bias n if so how much material

[@ceceliasdesignworld841]

Hi, You dont have to cut on the bias, I didn't, I used a 60'' wide fabric. it takes about 42'' of fabric for that swag pattern.

[@rbennett315]

In your initial photo you show a pleated waterfall valences hanging with grommets. Do you have a pattern

[@ceceliasdesignworld841]

Hi, good day, I know how to do those ones, but I never did a video on how to do one, hopefully I get to do one sometime soon.

[@margaretallard3880]

Hi Cecelia I was trying to cut. This waterfall valance but that 16" across on part (4) is confusing me is 8" on the fold fabric and when open you will get the 16" .

[@ceceliasdesignworld841]

Margaret Allard Hi thanks for your comment, the 16" mark is for you to get the angle on witch you will cut on, yes, you will get 16" when you open it up, and you should cut the 8" on the fold . When you get the 16" from the 8" when you fold it out , that means your doing the right thing. You will get an additional 8" on each side from the 4" they will be used for the rod.

[@اميعقوبللطبخوالخياطة]

طريقة الشرح رائعة. اتمنى لكي توفيق

[@ceceliasdesignworld841]

Thank you very much.

[@TigerLilyCo]

Does it always have to be 60x60? If not, how to I calculate what size I need?

[@ceceliasdesignworld841]

Hi, You can make it bigger or smaller if you want, just increase your measurement, example, you can use a 60" wide fabric, and then if you want it smaller than this one, then make the measurement going down smaller, or, if bigger add on to the measurement going down. then alter the other measurement, bigger or smaller, to get the shape. You can use a wider fabric than just the 60" to get it wider. when you make the measurement going down bigger or smaller, it will show in the way it drapes. thanks for watching.

[@rzpool8765]

God Job.

[@ceceliasdesignworld841]

RZ pool thank you

[@حسنابوالعلا-ع7ط]

think you so much

[@ceceliasdesignworld841]

Your welcome.

[@prefruinansingi4157]

Hi Cecilia we have been sent by tray and Keisha

[@ceceliasdesignworld841]

Thank you for watching, and welcome.

[@prefruinansingi4157]

Thanks

[@ceceliasdesignworld841]

Your welcome.

[@susanali9135]

ok thank u

[@ceceliasdesignworld841]

your welcome.

[@alicedassdass8870]

show the formula u used

[@ceceliasdesignworld841]

Hi, when making a waterfall valance like this the only thing you adjust is the 8'' and the 28'' if you want to make it bigger or smaller, this one can give you a 18'' drop, you dont really need a formula when doing it like this. Both the 4'' marks will be the same. you will just adjust the other measurements to make it bigger or smaller.

[@black-rubi36]

Grenadian

[@monicachuque8888]

Wena

[@garnetjohnson638]

Very nice

[@ceceliasdesignworld841]

Thank you so much for watching and for commenting, do come again and check out the other videos on this channel.