How to Make a Whiskey Cigar Tray with a Barrel Stave

In an earlier video we went over how we prepare barrel staves for our projects. Today, we are showing you how to make a Whiskey Cigar Tray with one of the prepare staves. All items in this video have been self purchased.
How to prepare barrel staves: • How To Prepare Whiskey...
Want a Whiskey Cigar Tray but don't want to make it, visit us and order one today.
Email: [e-mail]
Facebook: / 100636295142404
Website: RusticAmericanWoodworks.com
Where to buy the Xtool laser, RA2 attachment and other Xtool Products
www.xtool.com/...
Cork Coasters - www.amazon.com/gp/product/B0BZBVCWRF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&_encoding=UTF8&tag=rusticameri01-20&linkCode=ur2&linkId=b7d7a2b77803d3921bf1e34427db148f&camp=1789&creative=9325
BAUER4 in. x 36 in. Belt and 6 in. Disc Sander sovrn.co/5z1iakj
Amana Tool 45910 Carbide Core Box ¼ Radius x ½ Dia x 3/8 - www.amazon.com...
Sanding Belts - www.amazon.com...
90mm Forstner Bit - www.amazon.com...
Everbilt Black Carpet Nails sovrn.co/4cgmsmh
Wen Drill Press - www.amazon.com...
Bosch Router Table - www.amazon.com...
Bosch Router - www.amazon.com...
Bosch Router with Plunge - www.amazon.com...
May contain affiliate links.

[@justinbrandenburg4415]

Just a tip. A pressure washer works fantastic for removing the char and getting the grit and dirt off while still leaving all of the beautiful patina.

[@defaltoption]

good looking work mate. I cant be sure from the angle of the camera, but the cut looks as if you used the grinding disc to cut with. cleanup will be a shit load easier if you use a cutting disc. I have been using a wire brush attachment on my cordless angle grinder to clean off the burnt side and it works great giving a slightly burnished look to the charcoal.

[@rogerthomas738]

What is the metal plate for?

[@kalkirby2004]

Who makes the laser light on your drill press

[@thatshowwedoit6201]

it comes with the Wen Drill Press. It is built in.

[@cnbrinton]

What’s the thickness on the barrel stave?

[@thatshowwedoit6201]

I haven't really paid attention to the thickens of the stave when making these. I look at how wide they are. But when checking they ranged from 1/2" to 1" thick.

[@garrydye2394]

When everyone can make it...everyone will...and there will be no value left in you making it.

[@thatshowwedoit6201]

That's ok. I don't mind teaching others what I have learned. If I'm the only one who knows, then it dies with me. This way, hopefully what I know can help others and will live on long after I am gone.

[@freereinartstudio1463]

Not 'everyone' will make it. Not everyone has the tools or inclination. Some people like to see it made & then buy it. 😊