How To Make an Aluminium Air Battery | Genuine Experiment for Batteries DIY

Рет қаралды 87,208

Күн бұрын

Пікірлер: 225

@MrElectron 2 ай бұрын

BEST BATTERY CHARGER DIY VIDEO - kzbin.info/www/bejne/kH-WpJR_gceMi9ksi=9_nLu0vKOqfn4zi_ Previous Air Battery Video 👉 kzbin.info/www/bejne/hZfVhXuIl7OCjMksi=mLPvYBbSVRbGZtj0 3D Print - cults3d.com/en/3d-model/tool/aluminum-air-battery-design-10v-to-12v-dc Check my other videos on the same topic. Search Air Battery by Mr. Electron on youtube or Google.

@kanpurunplugged9970 2 ай бұрын

The voltage drops very fast it seems the ionisation potential of koh is affected by impurities

@kanpurunplugged9970 2 ай бұрын

Cyclic voltammetry method has been used to compare the electrochemical behaviors for the supercapacitors electrode based on the activated carbon material in form of monolith derived from areca catechu husk in 1 M H2SO4 and 1 M KOH electrolyte solutions. Monolith carbon electrode in 1 M H2SO4 performed excellent electrochemical storage properties including a highest specific capacitance of 150 F g−1 , energy density of 20.83 Wh kg-1 , and power density of 75.06 W kg-1 at 1.0 V voltage window. However, the specific capacitance produced from the KOH electrolyte is more stable than the H2SO4 at high scanning rates of 10 mV s-1 with reduced of 70.4%. These results suggest and confirm that 1 M H2SO4 is the ideal aqueous electrolyte for monolith biomass based-carbon electrode especially derived from areca catechu husk.

@MrElectron 2 ай бұрын

Its due to dendrites and passivation. I have a solution for that but I did a voting for the next project on my community post and the topic (500 amps transformer is winning it) so after this transformer project, I will make it.

@roshanmathew9443 Ай бұрын

Boss wts ur no

@Lampe2020 2 ай бұрын

When I saw "free power" in the title after clicking the thumbnail I thought this was just one of the many free energy videos on KZbin, but it seems to actually be real and not "free energy", just "power from a battery mostly made of scraps". Very nice!

@MrElectron 2 ай бұрын

@@Lampe2020 Ohh! Thanks 😊. Seems like I must avoid using this term free power to remove any possible confusion.

@TSAR-2023 Ай бұрын

This makes me happy, and we are enjoying this moment! I found the brightness of the lightning in your face. Yes, that's the happiness, which gave a positive result.

@MrElectron Ай бұрын

Yes! Thank you! 😊 💥

@danielrosselli 2 ай бұрын

This experiment works because of the potassium aluminum hydroxide, which produces free electrons. But if you want to actually consume the oxygen to complete the reaction with the hydroxyl groups, you need to use a breathable cathode. For a real aluminum-air (or metal-air) battery, you need to use a cathode like carbon to react with the oxygen and hydroxy groups in the electrolyte. You can try a new design, using a cathode in contact with air on one side and the electrolyte on the other side, and the carbon cannot be flooded.

@MrElectron 2 ай бұрын

@@danielrosselli Actually, I have already done that project in the past with the carbon cathodes around a year back and yes, the results was great. This time I went with the steel wire because somehow I have experienced that the mA output for steel wire is a little higher for same cathode area of crossection.

@arduinoguru7233 Ай бұрын

@@MrElectron How is the performance of the battery now? How much life circle it had? Because it's very important project for DIY batteries, I'm personally interested with it.

@DT-Mainnet 2 ай бұрын

Good idea and its much improvable 👍 starting with geometrik after making your Ironcoil print a seperator 1mm thick around this coil the alu around it so you got a round cell instead of a two point cell. 👍Now you take some spare alu to connect all cells as thick as posible, also use bolts to connect the ironcoils to each other 👍 these 2 things will give the Reaktion much better surface so more Reaktion in same space, also the bigger Terminals support bigger Wattages and leads to less powerlosses between the cells👍 hope this helps you improve it 👍

@MrElectron 2 ай бұрын

Thanks! Correct and I have already stated that in the video as well. Actually the issue was that the design adjustments were taking linger than usual and the project was getting delayed.

@AntRiderpro 2 ай бұрын

Im from Bangladesh...!! I also enjoy your videos.

@MrElectron 2 ай бұрын

😊😊 Thanks !

@ndueseesu2412 2 ай бұрын

Nice one, what's the advantage of not using graphite or carbon cathode in your battery.

@MrElectron 2 ай бұрын

Excellent question. For the same current production, larger carbon cathode size is required when compared to steel.

@ndueseesu2412 2 ай бұрын

@@MrElectron I Read that platinum wires are anti-rust but steel wires get rusty in the electrolyte over time resulting in high resistance. I used carbon electrodes and it's working well.

@MrElectron 2 ай бұрын

Correct. Yes carbon electrodes give better results in the long run as I tested in my previous video 👉 kzbin.info/www/bejne/qXOscoqJeLF-fKMsi=zjZOBI7Tf_7FPYE7

@sspence65 Ай бұрын

would you not get a higher voltage with copper wire instead of steel wire, as copper and aluminum are further apart on the reactance chart.

@josephlieberman5324 Ай бұрын

The pure Enthusiasm and inquisitive perspective have motivated me to SUBSCRIBE that i to may learn. Thank you Sir.

@MrElectron Ай бұрын

So nice of you. You are most welcome 😊 💥

@katiekumcgil Ай бұрын

very clever design ,well done ,thank you for making the files available

@MrElectron Ай бұрын

😊

@arnaudmosse6894 2 ай бұрын

Really InteresTing! Could you mesure capacity and power density?

@MrElectron 2 ай бұрын

@@arnaudmosse6894 This is not a proper version of this type. There is an even better upgrade for this on which the capacity and power density test should be done but I did a voting on my community tab as I always do after my video uploads for the next project and majority voted for high current transformer. So probably in the next to next.

@DmitriNesterov 2 ай бұрын

Береги глаза! Обещал воздушный элемент, а получился какой-то мокрый. Светодиод светящийся это здорово, но какой ток короткого замыкания? P.s. вопрос неактуален, досмотрел! 😊 Молодец! 1.5 Ватта - это мощь! ❤ Алюминий не самый удобный материал, моментально покрывается оксидной плёнкой.

@MrElectron 2 ай бұрын

Thanks I will.. yes the oxide problem. Although its seen more on the cathode than aluminium itself with KOH electrolyte.

@DmitriNesterov 2 ай бұрын

@@MrElectron yes you are right, later understood that aluminium dissolves continuously on anode. But you promised an air battery, why is it so wet? 😀

@MrElectron 2 ай бұрын

@@DmitriNesterov Well ! there is this big confusion with may viewer's. Firstly - This term Air battery is not given by me but by the inventor of this air battery. Charles F homes patented the first aluminium air battery. Secondly - Air battery name was never meant for air electrolyte but flow of current because of absorption of air (oxygen) by the anode aluminium (or others) . Thirdly - Water contains different levels of dissolved gasses amongst which, oxygen is also present in large quantities. So in simple terms, the name air battery was give in 1886 because air (oxygen) is consumed by Amluminum for production of current and not because the electrolyte is air or gaseous. Air battery electrolytes can be solid state as well as liquid.

@DmitriNesterov 2 ай бұрын

@@MrElectron wow, thank you for an explanation, now everything is clear! In my Russian language "air" ≈ "dry" (adjective) 😊 I will never argue with terms, the inventor knows better! And thank you for measuring short circuit current for me, I was very interested. 🤡 Now it is clear, that you know, what you are doing. Wish you success and to find a way to the new knowledge ❤️

@MrElectron 2 ай бұрын

@@DmitriNesterovThanks and you are most welcome 🙂❤️

@shyamsundaragarwal6615 16 күн бұрын

Aap konsa wire ka anod banaya.he.bataye

@davidmccrary8136 2 ай бұрын

Do you ever have your 3d print files available for viewers to try and print

@MrElectron 2 ай бұрын

3d print link is in the description and Pinned Comment

@loungelizard836 2 ай бұрын

Very cool experiment, you are very creative! I noticed that this battery has very high internal resistance. When you measured 160 mA shorted output at 10V, it means: 10V/.16A=60 Ohms. Although it's free (if you use scrap aluminum) it will not have very good power density. Are there ways to reduce the internal resistance?

@MrElectron 2 ай бұрын

@@loungelizard836 Thanks A lot ! Actually, it has one of the best power densities and that is why I am so much into this thing. This video was majorly created to show the passivation and dendrites problem. Yes! This battery that i have made is a basic one but I already have tested a better performing one 😊. Can't wait to share it with you all. Also , I do voting after every project on my community tab so if the majority of my viewers choose it again, I will make it for sure 👍

@Mr_Ravee 2 ай бұрын

Cool👍 you never stop to amaze..can this be of use to drive small ebike motors 250/350 watt and can be built under the budget of a 10AH battery pack?

@MrElectron 2 ай бұрын

Thanks 😊! Sure with some more additions like catalysts, ph stabilisers, etc and a bigger battery size , it is definitely possible.

@KamoheloMoloi-ot2oc 2 ай бұрын

Wow!!!!! Fantastic video to watch. Another enormous aluminum air battery!!!! Also another efficient design of a great battery. Best video with a project that is easy to make than other videos on KZbin. 👍👍👍👍👍👍 Absolutely outstanding video demonstrating how an aluminum air battery works

@MrElectron 2 ай бұрын

Thanks a lot 💥 🤗🤗

@jimkimbrell4878 2 ай бұрын

Great job, very proud of you

@MrElectron 2 ай бұрын

Thankyou 😊 😊 😊

@LalithKarthikeyan Ай бұрын

What is the steel wire used for? Isn't the cathode supposed to be air?

@scotts-tech 2 ай бұрын

Very nice video. You should figure out how to make a lead acid battery some day. People don't make those on the internet very often and when they do, it's either a proof of concept ultra low power type thing or a video with no explanation of factory workers doing it in India. It would be incredibly valuable information to see someone figure out what *exactly* it takes to diy a viable lead acid battery.

@MrElectron 2 ай бұрын

Thanks and sure I will. These days, I am fascinated by any battery making project .

@dh2032 Ай бұрын

lead acid batterys need charging first, the battery in the video is just chemical, mixing in and away you free electic (or more free electrons, harnessing anyway)

@johnfarris5325 2 ай бұрын

Wonder how that could compare to aluminum wire being wound, and steel for electrode? Just metals reversed.

@MrElectron 2 ай бұрын

Interesting approach.

@Vick5g 2 ай бұрын

This is a very nice project ❤ But does the battery runs down ??

@MrElectron 2 ай бұрын

@@Vick5g yes it done like any other battery

@Vick5g 2 ай бұрын

@blainecelestaine4543 2 ай бұрын

Boss experiment..🎉. Love to see this scaled up in readily available buxkets..

@MrElectron 2 ай бұрын

@@blainecelestaine4543 Thanks 😊

@TechnoEveryday 2 ай бұрын

6:33 check the happiness 😂❤

@sureshsukumaran7474 Ай бұрын

How long it last?

@Brad-sh2wn 27 күн бұрын

Good job. This is real

@uchelevite Ай бұрын

Is it rechargeable?

@lawrencehanson946 Ай бұрын

Can you recharge it?

@FerdausAlAmin 2 ай бұрын

Great experiment.. Thanks for this video..

@MrElectron 2 ай бұрын

Thanks! 😊

@tonywalker8030 2 ай бұрын

So could this be done in a automobile ? You use salt water correct ?

@MrElectron 2 ай бұрын

Sure ! Here I have use KOH but it work with Salt water as well. Check my other videos on the same topic. Search Air Battery by Mr. Electron on youtube or Google.

@robertneale6986 2 ай бұрын

One Question is it rechargeable or are you going to have to replace the electrolytic compound every time. Maybe the dendrites will return to the electrolytic solution by Ionization if you try or maybe it will blow up :-P

@MrElectron 2 ай бұрын

No it's not rechargeable, we have to replace the aluminium plates.

@Ericevijayohiani Ай бұрын

Try graphene next time for higher conductivity cool video

@MrElectron Ай бұрын

Thanks 😊

@luismiguelvelazquez-xc9bj 2 ай бұрын

would it work if the steel wire were galvanized?

@MrElectron 2 ай бұрын

I am not sure.. I has to be tried.

@shirishthakare9842 2 ай бұрын

I have doubts do comple ion move from anode to cathode through electrolite or it pass only electron or pass only charge via electric field. Some one has to end these doubts.

@MrElectron 2 ай бұрын

Ions move from anode to cathode and electrons move from anode to cathode externally when a wire is connected

@shirishthakare9842 2 ай бұрын

@@MrElectroninstead of transfer of ion can we make transfer of only charge by electric field similar to current in conductor?

@fabiogs68 2 ай бұрын

Parabéns!

@MrElectron 2 ай бұрын

Thanks ! 😊

@tommybulyan 2 ай бұрын

is this recharge able?

@MrElectron 2 ай бұрын

No. We have to replace the Aluminium Plates after consumption

@bhujangga 2 ай бұрын

what is the capacity?

@Dolani16 2 ай бұрын

I just learnt of aluminum -air battery last month, i was researching batteries for my ebikes startup. Thank you for this wonderful video❤

@MrElectron 2 ай бұрын

@@Dolani16 You are most welcome...❤️😊

@SoumojeetSaha 2 ай бұрын

is it steel or copper wire please inform me

@MrElectron 2 ай бұрын

@@SoumojeetSaha normal steel/iron wire used in construction

@SoumojeetSaha 2 ай бұрын

@@MrElectron then may I use copper wire in the coil

@MrElectron 2 ай бұрын

@@SoumojeetSaha I have not tested with that but yes there is no harm in trying.

@SoumojeetSaha 2 ай бұрын

Thank you very much

@SoumojeetSaha 2 ай бұрын

@@MrElectron thank you

@bekim137 2 ай бұрын

Can these batteries be charged

@MrElectron 2 ай бұрын

@kishored3246 2 ай бұрын

Its rechargeable?

@MrElectron 2 ай бұрын

No it's a fuel cell. We have to change the aluminium plates evrytime they get consumed

@electronicswithsaleem657 2 ай бұрын

Very nice❤

@MrElectron 2 ай бұрын

Thanks ! 😊

@Nash4Nashville 2 ай бұрын

At 1.6 amps, you could make hydrogen with only 2 units!

@solvated_photon 2 ай бұрын

It is much easier than that. Simply mix aluminum with strong hydroxide or hydrochloric acid and you can produce plenty of hydrogen very quickly. Sometimes the reaction starts slowly but it can quickly go out of control once the aluminum oxide passivation layer has dissolved. Edit to add that as a teenager, my friends and I would make “percussion bombs” by closing aluminum foil and HCl containing toilet cleaner in 20oz soda bottles. Very illegal in most places but it sounds like a cannon going off.

@johnslugger 2 ай бұрын

@@solvated_photon *Any Alkyd Hydroxide YES but not with Acid. Please revise your statement. Signed - John Slugger, Chemical Engineer @ MIT.*

@josepeixoto3384 2 ай бұрын

@@solvated_photon very fun; and you have time to move off because of the NOISE!! COVER YOUR EARS, each with ONE finger; seal them tight; i did not do that when i was young, and my right ear is less than half effective now, too late....

@solvated_photon 2 ай бұрын

@@josepeixoto3384 oof! Sorry to hear that, no pun intended. Back in the day I lived next to a river so I chucked a few in there at some point or another and they would get downstream a bit before going off. Otherwise I remember me and my gf’s brother put a few in garbage cans outside gas stations before driving off down the road a ways.

@stabironabb 2 ай бұрын

Nice idea

@souvikdas8054 2 ай бұрын

Hi sir

@MrElectron 2 ай бұрын

Hi 😊

@hobbit321a 3 күн бұрын

Can you charge it😊

@SoumojeetSaha 2 ай бұрын

but you told that you used steel wire in the coil so what may be used normal steel wire or copper wire

@MrElectron 2 ай бұрын

Actually different steel wires give different results so I gave you the proper source to avoid any confusion.

@Shashidharm-j8d 2 ай бұрын

good

@nebilsondelacruz8416 2 ай бұрын

Se puede recargar? Porqué le llaman de aire aluminio? Puedo ver aluminio, hierro y el electrolito líquido, en un contenedor polímero. Felicitaciones por tu creatividad, de poderse reducir la oxidación sería útil en muros de construcciones para gigantes baterías que almacenen energía eléctrica renovable.

@MrElectron 2 ай бұрын

The term air is used by all the researchers in the world because oxygen from the air is consumed to by the anode to get oxidised and release electrons.

@gsestream 2 ай бұрын

nice, you got it working. do you have any idea why its working in the air mode and not in the voltaic pile mode. ie why it prefers the aluminium-air instead of aluminium-iron working mode. one little problem is that the aluminium+KOH produces hydrogen. so it might drop down to hydrogen+ogyxen fuel cell at 0.6-0.7v working mode. if the liquid/walls gets saturated with hydrogen gas. do some long time tests, how the cell operates. not only fresh cells. if the chemistry gets contaminated easily then not so good. ie total energy over time graph. if it works in true aluminium-air mode, then no dendrite formation, just aluminium consumption. you have two reactions going at the same time. the deposition reaction is the second. find a chemistry that does not do that deposition. yeah carbon air electrode does not do that. try silver. possibly platinum. with silver you get the silver air electrode brightening up. yep the silver clean-up chemistry. try silver spoons as the air electrode.

@gsestream 2 ай бұрын

yep you literally get an aluminium-iron galvanic cell after the deposition on the iron. no more high aluminium-air voltages. more like 8x 0.6v = 4.8V. or so.

@MrElectron 2 ай бұрын

Correct. Sure, silver will solve the problem but it's expensive. My aim is to go for the simplest, cost effective + efficient methods that provides a long term performance.

@gsestream 2 ай бұрын

@@MrElectron electroplate an steel electrode with silver, much cheaper.

@gsestream 2 ай бұрын

@@MrElectron the silver even as thin layer is not consumed. from the air electrode. pure silver regenerated if oxidated. maybe a silver conductive paint is enough as air electrode.

@MrElectron 2 ай бұрын

Good idea 👏. Didn't think about that. I will keep that in mind for one of my upcoming air battery videos.

@SABUJ_EDIT 2 ай бұрын

Does free electricity made up ? Brother?

@MrElectron 2 ай бұрын

Are you asking about free energy videos ?

@SABUJ_EDIT 2 ай бұрын

@@MrElectron yes ?

@SABUJ_EDIT 2 ай бұрын

@@MrElectron can you work on it ?

@SABUJ_EDIT 2 ай бұрын

@@MrElectron with a practical demonstration

@SABUJ_EDIT 2 ай бұрын

@@MrElectron actually I am asking about magnetic energy conversion into mechanical energy......and mechanical energy into electrical energy. Does it possible?

@gotdragon 26 күн бұрын

Hmm will try...

@johnfarris5325 2 ай бұрын

Aluminum oxidizes quickly, after battery is made, and allowed to sit for a time, (a few days) does it still work without polishing the aluminum again?

@MrElectron 2 ай бұрын

Recommendation is to remove the aluminium plates or removing the electrolyte out of the battery after use.Companies all over the world are still working on it to find an approach that is simple, long lasting and effective.

@tusargolui7239 2 ай бұрын

Good

@KentuckyRanger 2 ай бұрын

Congratulations, you made a battery...

@yvesinformel221 2 ай бұрын

Do a capacity test. It's a nice proof of concept but I think it is very weak

@MrElectron 2 ай бұрын

Sure! Although, I have a much better idea to eliminate the flaws. I will be uploading it in one of my upcoming videos.

@mohammedansari7888 2 ай бұрын

From which city are you from?

@MrElectron 2 ай бұрын

Sorry, I can't share that. Hope u understand 😊

@mohammedansari7888 2 ай бұрын

@@MrElectron ok bro, by the way I am from Hyderabad, Telangana🙂

@MrElectron 2 ай бұрын

@@mohammedansari7888 Cool ! Its a nice place I have heard. 👍 I will visit someday soon 😀

@wonderwang1585 Ай бұрын

since the voltage of cell is 2.8V, my repeat output 3 times as fast as a dry cell(1.5V). now I am using a voltage devider to reduce the v. Not yet a success

@PicaDelphon 2 ай бұрын

Is it Me or Do you Need to Test the Battery Current With a Load to get the Right Current Load..??..

@MrElectron 2 ай бұрын

Actually, measuring current with load gives connected load current while measuring current without it gives maximum produced current or Short Circuit Current.

@ozone7992 2 ай бұрын

For the next Nobel Prize, you should rightfully be nominated.

@MrElectron 2 ай бұрын

🤠❤️

@josephlieberman5324 Ай бұрын

Agreed

@MrElectron Ай бұрын

@@josephlieberman5324 Thanks for the honor. It's more valuable than any prize in the world. 🎖 😇

@rakeshpvsaaya Ай бұрын

you are checking the ampere in a wrong way. for checking ampere you have to disconnect the positive probe and connect it to the top of the socket provided just top of the +ve probe of multimeter and rotate the switch to ampere mode

@johnslugger 2 ай бұрын

*I am From America. You sound like the guy who took me for $6000 in Target gift cards last year!*

@MrElectron 2 ай бұрын

😁

@Explosivekeed 2 ай бұрын

Hi all

@CHANDRASEKHARKANUGULA Ай бұрын

❤

@Jerin-l4s 2 ай бұрын

Perhaps more aluminum surface area more power

@MrElectron 2 ай бұрын

Yes

@marmira6217 Ай бұрын

Test every cell make sure produce power cell by cell

@creativbaaz2308 28 күн бұрын

7:16 😊😊😊😊 after achieve your goal .... spreading smile on face ...is really matter

@phillangstrom8693 2 ай бұрын

i don't think you know what an air battery is because that is defiantly not an air battery

@MrElectron 2 ай бұрын

Well ! there is this big confusion with may viewer's. Firstly - This term Air battery is not given by me but by the inventor of this air battery. Charles F homes patented the first aluminium air battery. Secondly - Air battery name was never meant for air electrolyte but flow of current because of absorption of air (oxygen) by the anode aluminium (or others) . Thirdly - Water contains different levels of dissolved gasses amongst which, oxygen is also present in large quantities. So in simple terms, the name air battery was give in 1886 because air (oxygen) is consumed by Amluminum for production of current and not because the electrolyte is air or gaseous. Air battery electrolytes can be solid state as well as liquid.

@sultanshah9434 2 ай бұрын

Bro please use a good multimeter

@MrElectron 2 ай бұрын

@@sultanshah9434 And why is this bad ?

@jacktheripper1750 2 ай бұрын

to call it as Aluminium AIR battery is a SCAM.

@djieffe 2 ай бұрын

looks more like stainless steel than aluminium, so remove all words but SCAM.

@MrElectron 2 ай бұрын

@paulfrost8952 2 ай бұрын

@@MrElectron Thank you for a brilliant description of what an air battery is and their history 👍

@MrElectron 2 ай бұрын

@@paulfrost8952 You are most welcome 😊 ❤️

@IshvOP 2 ай бұрын

@@MrElectronHmm, they thought that you were that guy who posts free energy stuff like others. That's why they were angry 😅👻

@allgamingplatform0408 2 ай бұрын

Hindi me banao please 🙏

@DushyantPrajapati-e5o Ай бұрын

old tv flyback transformer make plasma

@kahe7436 2 ай бұрын

this thing seems to be fake

@MrElectron 2 ай бұрын

Seems like you are new to my channel. I can totally understand you especially when there is so much fake content surrounding us all over youtube, insta and fb. It will take time for you to gain trust on any new channel with research grade content. I as a content creator will say only 3 things about me. 1- You are free to verify my other videos to gain trust. 2- I am the one who actually exposes the fake video creators on youtube through my other channel ( Mr. electron alternator ). 3- I never hide the number of dislikes on my videos even though this option has been provided by youtube. Although, I think it's an evil option and I have asked youtube to remove it but at the end, it's youtube's decision. I hope that these should clarify things.

@solvated_photon 2 ай бұрын

I believe it actually would work and it would be on the same basis as the thermite reaction. The aluminum will want to readily give its electrons to the iron oxide on the cathodes and creating the closed circuit gives it the ability to do so. Edit to add that I was skeptical when I saw the thumbnail but as I watched this I realized that it is actually a viable electrochemical reaction to take advantage of. My question is how reversible can this be? Can you recharge this cell to any significant amount?

@MrElectron 2 ай бұрын

@@solvated_photon No, it's a fuel cell and its non rechargeable. Once the aluminium plates get consumed, we have to change it..

@solvated_photon 2 ай бұрын

@@MrElectronokay, so it is the dissolving of the aluminum in the hydroxide itself that drives the electron flow. This makes sense because aluminum dissolving is recognized as an effective reducing reaction in chemistry. One way people will speed this up is by adding a Hg2+ salt which helps mitigates the passivation layer, but in this case I think that would make the reaction too fast. You already have an impressive power source from very basic materials. Well done! 👍

@MrElectron 2 ай бұрын

@@solvated_photon Correct! And Thanks 😊 .

@skirnir-atf 2 ай бұрын

Fe-Al battery, more correct name

@MrElectron 2 ай бұрын

@DmitriNesterov Well ! there is this big confusion with may viewer's. Firstly - This term Air battery is not given by me but by the inventor of this air battery. Charles F homes patented the first aluminium air battery. Secondly - Air battery name was never meant for air electrolyte but flow of current because of absorption of air (oxygen) by the anode aluminium (or others) . Thirdly - Water contains different levels of dissolved gasses amongst which, oxygen is also present in large quantities. So in simple terms, the name air battery was give in 1886 because air (oxygen) is consumed by Amluminum for production of current and not because the electrolyte is air or gaseous. Air battery electrolytes can be solid state as well as liquid.

@whosle 2 ай бұрын

“Air” batteries, adds liquid electrolyte. Cool story bro.

@MrElectron 2 ай бұрын

Well ! there is this big confusion with many viewer's. Firstly - This term Air battery is not given by me but by the inventor of this air battery. Charles F homes patented the first aluminium air battery. Secondly - Air battery name was never meant for air electrolyte but flow of current because of absorption of air (oxygen) by the anode aluminium (or others) . Thirdly - Water contains different levels of dissolved gasses amongst which, oxygen is also present in large quantities. So in simple terms, the name air battery was give in 1886 because air (oxygen) is consumed by Amluminum for production of current and not because the electrolyte is air or gaseous. Air battery electrolytes can be solid state as well as liquid.

@Mr_Consultant 27 күн бұрын

How the hell is that an air battery?. Its just an AlFe battery with an electrolyte.

@rosewindows1 2 ай бұрын

The title of this video is misleading, why is it an 'air' battery?

@MrElectron 2 ай бұрын

@@rosewindows1 The term air is used by all the researchers in the world because oxygen from the air is consumed to by the anode to get oxidised and release electrons.

@rosewindows1 2 ай бұрын

@@MrElectron But the anode is immersed in liquid electrolyte, so how can it oxidise oxygen from the air?

@MrElectron 2 ай бұрын

Excellent question. Seems like you are new to my channel. Anyways, as I have already explained about this in the previous aluminium air battery parts that the oxygen gets absorbed by the electrolyte from the air which is then used in anode oxidation. ( that's how fishes breath under water 🙂 ) Also, more than 80% of the electrolyte is water.

@rosewindows1 2 ай бұрын

@@MrElectron Very interesting. Perhaps oxygen is also released from the Potassium hydroxide.

@MrElectron 2 ай бұрын

@@rosewindows1 released gas is hydrogen by the anode.

@edures230 2 ай бұрын

Aluminium Air Battery????? I do not see air but water

@MrElectron 2 ай бұрын

@homelessEh 2 ай бұрын

is that not just a multi cell smaller scale bagdad battery ..

@MrElectron 2 ай бұрын

@sanatani8423 2 ай бұрын

Afsos mujey english samaj mey nahi ati .sarkari school valoka bura hal hai .😮😮😢😢😮😮

@MrElectron 2 ай бұрын

Sahi baat 😔

@moon.m8727 2 ай бұрын

Where’s air? This is a normal battery

@MrElectron 2 ай бұрын

@@moon.m8727 Well ! there is this big confusion with may viewer's. Firstly - This term Air battery is not given by me but by the inventor of this air battery. Charles F homes patented the first aluminium air battery. Secondly - Air battery name was never meant for air electrolyte but flow of current because of absorption of air (oxygen) by the anode aluminium (or others) . Thirdly - Water contains different levels of dissolved gasses amongst which, oxygen is also present in large quantities. So in simple terms, the name air battery was give in 1886 because air (oxygen) is consumed by Amluminum for production of current and not because the electrolyte is air or gaseous. Air battery electrolytes can be solid state as well as liquid.