How to make an Amazing Merry Go Round from Cardboard - Just5mins

[@Just5mins]

Say something....

[@etjam9074]

Just5mins .

[@hailybui5372]

can't wait to see your next project

[@jennifersolini]

Just5mins Sooo good that urs was better than mine...😣😣😣😥

[@blackopinionatedscholar8479]

How did u make the motor exactly what did u use

[@mochammadromadhoni6929]

something.. 👍👍👍👍

[@maicey_t.]

I have never even dreamed of making gears out of cardboard, but it's genius.

[@mariaandreamelendez8187]

One thing is for sure, this is not a 5 minute craft 😂🤣😂🤣 We tried this in the morning, and we're still half way done. 😂 It's 10 o clock in the evening. 12+ hours have passed. The craft is great though. 😂

[@shanterinrowe8069]

Andrea Melendez when you built it did you have the yellow thing covering the motor or you were able to build the carousel without it? 1:35

[@Monkeys_are_the_bes]

It Took 5 minutes stop lying

[@Myllys2]

It's 5 minutes of play time, then you are over it 😅

[@wrennation9179]

the only thing I wish is that everything was measured, including the smaller parts.

[@guadalupebecerra8831]

me encanto este trabajo....👍👏👏

[@meetyounever6923]

What an amazing project! I was hoping to add something like this to my daughter's room. Thank you!

[@kalpanasatish2616]

thanks sooo much.......i was tired of looking for videos with step by step explaination

[@jennifersolini]

love this DIY it is a life save

[@hailybui5372]

Amazing project!!!!

[@SarahJankewicz]

But it's still an amazing project! Had to change it up a little though...

[@RealOtakuTube]

Nice amazing I try

[@ludi1859]

AMAXIIIIIIIIIIIIIINNNNNGGGGGG VIDEOOOO (again)!!!

[@Just5mins]

Thank you so much

[@wizardmagizian]

omg this is exactly how I imagined the structure! thanks for showing me this idea works before start on a project like this :D

[@Bri-uu6dz]

Gracias tenia duda del circuito pero ya entendi❤

[@adamvivona6301]

Hey dude, do you have full instructions that show the process step by step?

[@NekoBoGene]

Amazing skills, amazing patience, beautiful result. I hope the video will last longer, I like it.

[@Just5mins]

Thank you so much :D

[@hailybui5372]

I guess it should be for Christmas!!! Bravo

[@Just5mins]

4 months for planning 😂

[@SaraAhmad]

So nice 👍

[@Just5mins]

😍

[@c.a.8738]

Excellent work. Great project ! Thank you for sharing it :)

[@evellyn6650]

Great job! So lovely 😍

[@bill2009utube]

excellent video - thanks!

[@LinaMarcelaCanocorrales]

De cuántos boltios es el motor?

[@natalyaroberts1998]

you need to update the list in the description, you obviously need more resources then just - Cardboard, bamboo stick - Hot glue - Marble

[@setar7022]

Thats really cool... but how does the horses go up and down? I need to make this for school project and im confused. •~•

[@nita_xox1237]

Same I have to do this for school project XD

[@GrungeGranny]

It looks like when the top part is added, that the stick end with the ball is “riding” on top of the slopes underneath. But when the sticks are shown beforehand, since they’re not able to stand upright on their own, the ball part isn’t on top of the under-slopes yet. It’s the only thing I can think of but it does look like that’s how it’s working since that’s how the sticks are moving (in line with the slopes underneath).

[@f.concepcionfloresmanzano1832]

Hola tengo unas preguntas: - Las bolas de los palitos son muy grandes y por donde van rodando, por encima de la parte ondulada del cartón, es que en el video no se aprecia. - A que altura va puesto el rodamiento lateral pues tampoco pone medida y que funcion tienen. Perdone mi ignorancia es que me encanta el proyecto y me gustaría poder hacerlo. Gracias

[@veronasepulveda3566]

Tengo la misma duda sobre el rodamiento lateral😢

[@cristianmunoz5601]

​@@veronasepulveda3566son para ayudar a la base a girar mejor

[@louneybin8767]

What size is the wheel and the other circles in the center of the carousel? How about the size of the second cylinder you make for the top of the carousel? And the triangles, what size are they?

[@chloeclo8958]

hi, so cool! What is the motor you used? Where can we buy them? Thank you :)

[@thomasl5465]

Hi again Just5mins ☺

[@Just5mins]

Hi The Invincible Pug

[@papermacheman151]

this is so cool

[@Xenilolix]

NICE❤

[@jennifersolini]

Dude,where did u get that awsome bumpy paper?? Also, that yellow thingy?? love this and i subbed!

[@Just5mins]

I get bumpy paper from cardboard, and yellow thing is gear motor (goo.gl/2QdPMo)

[@jennifersolini]

Just5mins thanks...now i found out wat went wrong because i used the WRONG motor!

[@jennifersolini]

Just5mins sorry but i need help wat is that silve thing in 0:53

[@Ar-dv7co]

귀여운•ᴄᴀɴᴅʏғʟxss•귀여운 Did you find out what was that silver thing?

[@emilythara06]

@@jennifersolini it's a ball bearing

[@Imsioweiyaey]

Amazing Labo laboratory technician salary Mechanical studio apartments how?

[@RealOtakuTube]

Hey make a game of pokemon or beyblade

[@nightheart514]

Liar. This took me over four hours. You seriously need to change this from five minutes to infinity hours

[@instantregrets5014]

what do you call that yellow thing and what type of batteries and where do you buy the wire shown in the video? somewhere where i can buy in australia

[@Just5mins]

Hello, you can buy these things on Amazon.com.au.1. The yellow thing is called Car gear motor2. I used 2 1,5V batteries. 3. Do you mean the connect wire between batteries and motor? It also can buy on Amazon 😎

[@instantregrets5014]

Just5mins thank you! i need to know what that black thing that stores the batteries called, it would mean alot to me as i have less time to do this project from everyone else in my class. and yes i did mean that.

[@olademar9097]

Gracias me quedo como el pico el carrusel

[@SayNotLess]

Fitz sigma la awak

[@MigWei]

Hey just wanna tell you that I'm going to be taking this tutorial to be in my school project!..Can you tell me how many cardboard have you used for this?? :P

[@s_aisyah4331]

how could u make it to go ups and downs?

[@emmajohansson2825]

The sticks have one marble that's glued to the end of the stick and then the marble goes up and down on the "triangles" made out of cardboard 👍

[@jordanhenderson3741]

Well spotted Emma, I flicked through the comments looking for this answer as well. Thanks!

[@azca73]

What’s the name for each piece of the three-piece battery power motor?

[@katstellation]

This is so beautiful and I would love to try and make this but unfortunately the directions are so unclear, for example 0:51 what is that metal thing? 1:24 i that white tube a plastic straw? 2:00 where are the marbles from? it would be so lovely if you could add more measurements to all the pieces and write in detail what the directions are, as well as where you bought those metal ring things.

[@ieeia7585]

that bearing of spinner

[@jiromnuguse5836]

Exactly! I was going to type the same thing.

[@ieeia7585]

Thank you

[@rosemerinakaiser1003]

the metal part appears to look like the inner piece of a fidget spinner

[@elibeelie]

i followed the tutorial and i snapped my fingers to cut it and it didn't work, i feel lied too

[@jiewweitan9623]

don't understand why the horse can up & down, coz the stick is inside the hill , not together

[@BlazedPlays_Games]

Brought to you by LG

[@annabelandlucy]

what is the motor/where is the motor from?

[@moisesascenciodedios3896]

Motorreductor, lo venden en las electricas como steren

[@paolamejorada3812]

Fácilisimo, ¿verdad?

[@farzanarkana258]

Perfecto

[@sayu0071]

... What type of energy is that (the project is awesome, but I stil have to explain that to my teacher... I used this for my chemistry workshop...)

[@marthacalderon1993]

Where can I buy a motor? Is a beautiful work and I want to tri to do it,thank for share

[@devputri3105]

1st

[@mimiaquariusharris6244]

I have two questions did it actually play merry go round music and can you something other than cardboard. I love your video.

[@BwooHuraca]

It doesn't look like it's set up to play music but I'm sure there's enough room to fit some kind of musical mechanism in there. You could probably also use wood to make one.

[@emiliatan2796]

i dont get how the horse moves up and down, mind explaining?

[@spy4863]

Not sure but it looks like the fidget spinner rollers installed on the sides underneath the platform (2:19-3:00)are what makes the horses move up and down-the sticks that support the horses all have balls on the bottom (1:56-2:02) and when the sticks move over the rollers it makes the horses go up and down.

[@delianickles1699]

The marbles connected to the sticks go up and down on the triangles.

[@Kocsis_Robert]

hey, how the horses are waving up and down??

[@emmajohansson2825]

The sticks have one marble that's glued to the end of the stick and then the marble goes up and down on the "triangles" made out of cardboard 👍

[@mayaqistina9388]

I can certainly do this but where to get the motor for carousel to move? Please answer!!!

[@liaochengchun]

What kind of motor did you use? Thanks.

[@Kimavc]

hi, I would like to know what engine you used please

[@yikesitsconnor]

what is the thing that makes the whole carousel spin? Like what am I looking for on Amazon?

[@kiararara2854]

Sorry, how did you connecting the cable with car gear motor?

[@jhymedelacerna8815]

What type motor did you use??

[@Just5mins]

I used step motor

[@smartgirl7649]

In your circuit, what is this yellow-colored thing called ?

[@luminous_01]

Can I use real gear to do this? Please reply me quickly.

[@timothymcgarry7551]

Is there a better set of part dimensions and where is the battery pack and motor purchased?

[@Kamalesh20]

How many centimetres is the cardboard gear thing that you cut out?

[@daminibinakia6137]

DC MOTOR where Available in Dewas mp

[@mrs051075]

Wow

[@pat6272]

where do you get the electrical parts

[@haileyanne.b]

Yeah so like.... I don’t have any of that stuff 😂

[@eileanvilela8923]

Is this a simple machine

[@Myllys2]

Sponsored by LG 😅

[@ChemiBaralust]

watched the whole video three times and still don't understand how the "up and down" system of the horses works xddd

[@raj4785]

this is awesome and I'm planning to make it in a few weeks. Please let me know the need of the structure created at 2:35.. can we effectively manage without that? please reply

[@grec.]

I was wondering the same thing. Then came to realize that maybe they help to keep the poles of the carousel rolling forward.

[@caitlinwatkins4238]

Can you tell me what exactly is being used for the motors? Everything that is in 1:34 seconds. I am trying to remake everything but these aren't in the things needed.

[@mrs051075]

🤩

[@TechImaginist]

How do you change the battery? :)

[@MarudoCreations]

U did not put the other things need to buy

[@claudineiaparecido8521]

O que usou na parte eletrônica?

[@sageevivie2827]

How do you make the gears? I have thick corrugated cardboard but the part used for the gear lining is thin and hard to access. What did you use for the rim?

[@tatianaarias1597]

Para q sirven laa piquis ? Y los spiner q funcion tienen por favor 😢

[@faysautba]

But how can the horse go up and down?

[@pookieshmookiedookie]

What the of Motor is it?

[@mquiz7081]

What is the type of this motor?

[@Kamalesh20]

HI! I have a question.. what is the size of the ball bearing you use?

[@Just5mins]

I used 1.5cm ball bearing

[@johnmarksumugat1829]

what do you call to the metal one

[@sladjanabakic8610]

Giveaway pleaseeee

[@Just5mins]

😎

[@sladjanabakic8610]

Just5mins yes or no pls giveaway

[@jennifersolini]

Sladjana Bakic it is a yes

[@tazkiakhan7715]

What is that thing he uses the machine

[@vianachhugani9962]

Can u pls tell me what is that motor

[@tiersabuckley8791]

So annoying that he doesn’t list all products needed for this!

[@avi_gamer2940]

Esta idea la vi en otro canal que lo subio hace unos años muy sospechoso🤔

[@MizunoMars]

I will need 100 x 5 minutes on slow speed

[@josebenitez2849]

Ver maquinas

[@tatianatarakanova295]

I want this one but from wood! I have a question, do you have patterns for this? I want to create one.

[@Just5mins]

Sory, I dont have patterns, I have only the measurement that showed in the video

[@tatianatarakanova295]

Just5mins Can I ask another one? It is possible to create an mechanical mechanism with winding key like in old clock or watch? The electric motor rotates the carousel too fast, and I want smoothness probably. I thought whether it is possible to use the musical mechanism from another old box or buy it on the Internet. But I don’t know how to calculate which mechanism I need. A box of wood or veneer will have a certain weight and pressure on the mechanism. I don’t know how to count them in order to choose the right mechanism. I know that you only make cardboard mechanisms and things, and you're insanely COOL about it! But maybe you can know and advise something on my question? It's just the first time I have found such a beautiful DIY lesson on the creation of carousels, thank you a lot for making this.

[@nellynavarro915]

​@@Just5minsla mayoría de tus pies no tiene medidas

[@JOY-bu1vq]

hi sir, how are we going to do the up and down mechanism

[@xzulid]

I'm pretty sure that at 0:52 you will see the border thing. It's that.

[@uniquejeffrey1467]

measurements?

[@SarahJankewicz]

This does NOT take five minutes!

[@monkeypuff5126]

Hate how they never put the dimensions or links to buy stuff

[@saulsantonja3396]

Hola, no acabo de entender como haces que los caballos suban y bajen

[@cristianmunoz5601]

Siiii,no se entiende esa parte A mí parecer el cartón ondulado que puso debajo por dentro y las pelotas pasan por ahí dando ese Vaivén

[@assassincreed7806]

I have a question, how did it move up and down while it moves

[@jeno2252]

I just figured this out, I think. When the marbles at the bottom of the poles run into the wheels from the fidget spinner it makes the pole to go up. When the marbles aren't hitting a wheel the poles go back down.

[@assassincreed7806]

@@jeno2252 wHat about the thing that look like a wave,

[@emilythara06]

@@assassincreed7806 I'm confused between two answers now and I'm supposed to make this in another few days

[@assassincreed7806]

@@emilythara06 i already made this a year ago lmao what a memory

[@emilythara06]

@@assassincreed7806 so how did those things move up and down? I need help please

[@mochammadromadhoni6929]

ok, that's looks easy.. few hours later... shit! i'm too stupid to make it..

[@emilythara06]

It's ok I'm stupid with you I haven't even started and I already know I'm gonna be rubbish at this

[@mochammadromadhoni6929]

3 years and I still stupid.. maybe the magic fingerklick make it 5 minutes..

[@alallen2767]

:)

[@nhutrinh4380]

OK 5 mins :((