How to make an iron board cover- easy beginner tutorial on The Sewing Channel

Is your iron board cover lookin rough?
Learn how to make an iron board cover today!
Sew a cover for your ironing board with me on "The Sewing Channel"!
You will need a 1/2 yard of fabric and some ribbon or string for the tie.
The fabric I used is from Joann Fabrics (Fabric Traditions)
Both my serger and sewing machine are made by Brother.
Please leave questions and comments below.
Thanks for watching!
Panasonic 360 Ceramic Cordless Freestyle Metallic Red Iron
Click this link for exact iron I'm using- amzn.to/3f2Riwo
Here is my exact iron in red! amzn.to/2Z1abdw
Here's the link to the 60mm OLFA rotary cutter I use - amzn.to/3f5fRsx
Here is link to my exact ROUND cutting/ironing mat/board that I use- amzn.to/2ZGWgs5
Link to the 45mm rotary OLFA cutter I use- amzn.to/2Z1AJv9
Click here for the exact Yeti you always see me drinking my coffee out of :) amzn.to/38u1Q5c
Link to my BIG SULLIVAN'S craft/hobby table-amzn.to/2O2ER7I
Link to the clear/white Sullivan's cutting mat for my craft table- amzn.to/3f62mZE
Buy the absolute best BBQ sauce / Flame Shack BBQ sauce here: www.flameshack.com YOU WON'T BE DISSAPOINTED!

[@joannefrancis7040]

Well I did it! Thank you for saying 4 inches around. I NEEDED four inches. It fit perfectly. Mine is sunflower print. First thing you notice when you enter my sewing space! LOL THANK YOU for the perfect tutorial. ❤❤❤

[@shirley1413]

Thanks for such a simple to the point job on this tutorial. I was looking to buy a cover for my board, I have one similar to yours, and was not impressed with the ones I saw. So here we are! I actually tackled this project, I put a new pad on mine as well and it came out really nice. ❤

[@sandrariehl7483]

💖💖you did that so fast & explained so well 👍

[@artiejohnson703]

Thank You, Thank You, I made a cover years ago. And it didn’t work out. I will definitely use this method in making my new ironing board cover. Again Thank You. ❤

[@JG-yh8wz]

Oh my. I just watched about 5 videos on how to do this and I cannot believe how difficult and drawn out folks can make a simple thing. You really nailed this and did a great job of making Way too many long stories into shorter ones.

[@sharonframpton1887]

Straight forward! Thank you Tracy!

[@mrsbeckydaisy]

Thank you so much for sharing your method of covering my ugly ironing board. Your video was easy and provided the right amount of detail to get the job done. I have a rolling laundry hamper that has a ironing surface as the lid. I looked everywhere online to just order a new cover but I guess they have discontinued this item. It is a 17.5”x31” rectangle so I am going to give this a go and see what happens. Thanks again.

[@roseannseiple451]

Terresa, I can't believe that you have been only sewing for 5 years. You are so amazing, love your videos and how you think. You have encouraged me to try new things and to find many ways to use the techniques you teach. Thank you.

[@TheSewingChannel]

I am so happy to know you find value in my videos 💛🤓💜

[@GrammaPatriot]

You are one of my favorite ladies to watch to learn things. Thanks for this tutorial!

[@TheSewingChannel]

Thank you so much for your kindness Toby💛

[@roseredd7895]

Hello dear sewing sister ! I have looked at quite a few videos on making a sewing board cover and I must say I love how defined yours is ! Thank you for posting this , I currently have three metal iron boards in use here - ALL need new covers . My favorite one I use is next to my machine a mini just like yours ! Definitely ready to attempt making new covers , thanks again !

[@TheSewingChannel]

That's awesome Rose!!! You can do it!!!💛

[@roseredd7895]

@@TheSewingChannel I did it !!!!

[@TheSewingChannel]

Awesome!!!! Way to go!!!!🥳

[@reid3363]

Thank you so much. I covered my board after years of neglect

[@TheSewingChannel]

That's great!

[@debiegordon3787]

I LUV IT💚💚💚IT REALLY IS A FEEL GOOD PATTERN & COLOR...COOL UR FINGER NAILS MATCHED TOO.THANQ👍👍👍💚💚💚🌻🌻🌻

[@TheSewingChannel]

*_Thanks Debie💜_*

[@ReallyJillRogoff]

Good timing! Will be making this very soon. Thank-you... Well, a few days later, I have a drawn pattern, and a newly-completed cover. For the batting I used most of the sponge cover that I've grappling with for the past five years. Perfect recycling. And as for those tricky curves: I found some judicious pinning, basting, and the careful sewing down (by hand) of each 'dart' prepared the curves for the final sewing by machine. It took extra time, sure, but the result was no bunching up of fabric, and a smooth edge. What a relief to have a user-friendly cover at long last!

[@TheSewingChannel]

Wonderful Jill...have fun!

[@rebeccaj9743]

I need to do this for my sewing area. I have a corner of my mudroom where I sew. It could really use some brighten up. I got a serger for my 42nd birthday. I had been wanting one for so long it feels like a dream when I use it. So, I completely understand wanting any excuse to use yours. Another really appreciate sewing video! Thanks so much! :)

[@ellenhofer3343]

I like the idea of using thin binding instead of elastic or string. Stronger. I cut my fabric only 3" wider all around, but I think if I serge the edge instead of folding and sewing 1/4" of the fabric under and then 1" under as in some other videos I will be fine. Thank you so very much for the very simple to follow video. I'll have mine done in no time now.!

[@TheSewingChannel]

*_Thank you for the kind feedback Ellen!💛_*

[@glendacrouch1877]

Loved this, my ironing board will be cuter to look at! Thanks Tracy.

[@Hyemoonie]

I love your sewing room!

[@TheSewingChannel]

Thank you🧡

[@user-22-]

Nice job❗️

[@imshaaaaaa]

Mashallah beautiful and easy

[@laurasoto6028]

I love it!!! So easy, thank you!!

[@TheSewingChannel]

You’re welcome!💛

[@gjbowens13]

Beautiful job, explanation/directions was clear and I’m ready to make my own! Now...just need to find a tabletop board 😉 I’m sure the thrift shops will have one...gotta go!

[@TheSewingChannel]

That’s exactly where I got my board at… The Goodwill!✅ keep me posted on how it turns out.✂️👍✅

[@gjbowens13]

@@TheSewingChannel Found my tabletop iron board today @ our local Goodwill for only $3.99 !!

[@TheSewingChannel]

Way to go! 🎉🎊

[@rachaelpooplard]

Excellent! Thank you for a clear and easy tutorial :)

[@TheSewingChannel]

*_Glad it was helpful!_*

[@katherineharrison7991]

Really great video! Thank You Sew Much! ❤ I was just thinking the other day, I need a new cover for my ironing board. Wala, I stumbled on to this video after I was watching your ragged heart pillow, which I totally love to. I like your style the shabby chic look. You are a great teacher!❤ I do have a question. My ironing board is a bit on the thin side the thickness. What thickness of cotton batting should I use to fluff it up a bit? Also what brand is your favorite cotton shabby chic fabrics? Thank You again!❤ I just was thinking it would be nice if you could design a iron cover to mach your board. I think that would be a cool look and keep the dust of the iron. What do you think?

[@TheSewingChannel]

Thank you for the kind words Katherine. I would use a regular cotton batting cut to fit your board✅ I don't really have one fabric company that I like🤷🏻‍♀️ I buy from all places...and yes an iron cover would be cute❣️

[@carolweber573]

Great video! Thank you for your time!!

[@TheSewingChannel]

*_Glad it was helpful!💛_*

[@jillthomas366]

Great tutorial, thank you! 😁

[@TheSewingChannel]

*_You're very welcome!_*

[@beachblu6953]

How much do you fold over the edge ? Nice easy tutorial on making this thanks

[@TheSewingChannel]

I forget...it's been awhile. Prob around 2-3"✅

[@beachblu6953]

@@TheSewingChannel thank you 😊

[@anaesterhazy631]

beautiful cover and beautiful blouse! just one question: why do you prefer string to elastic?

[@TheSewingChannel]

Not sure. lol. I think it’s because I can pull it really tight✅

[@drkatel]

Lovely! I need to cover a beautiful wooden tailor’s sleeve press that I found in a thrift shop for $3.99! It’s very old and the batting fabric disintegrated in the washer, even in a lingerie bag. (I expected this but gave it a shot anyway.) What do you recommend for under the top cotton layer? I was thinking about a thick batting under a layer of InsulBrite (to reflect heat)?

[@TheSewingChannel]

Your idea is great✅ You could use almost anything as the batting as long as it doesn't burn....I would use a few layers of cotton batting🤷🏻‍♀️

[@bellacucina3209]

Nice Job. I'll use elastic instead from Walmart generic brand. Thank you.

[@CH-uf3jp]

Thank you. 💡👵

[@dorisosborne132]

Could you thread elastic through the casing?

[@TheSewingChannel]

Absolutely ✅

[@donnavanboxel9174]

👍👍