✅ How to MAKE and INSTALL Drywall Ceiling TILES 👊 Steel Framing

🔥 How to Assemble PLADUR METALLIC STRUCTURE
✅ Steel Framing 🤜 TINY House
👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇
• 🔥 Cómo Montar ESTRUCTU...
Profiles for exterior and wet areas
These are profiles that the difference is their composition.
They are made of galvanized steel type DX51D and have a Z450 galvanized protection (except for the U Profile, so they are suitable for indoor humid areas, semi-outdoor areas and outdoor areas. Depending on their geometry they can be vertical elements (Studs) with a nominal thickness of 0.7, 1 or 2 mm, or horizontal elements (Master or Channels) with a nominal thickness of 0.6 or 0.7 mm.
▶︎ What is an OSB Board?
An OSB board is made up of several layers of wood chips glued together with pressure applied. The layers are not arranged in any direction, as it may seem, but rather the directions in which the chips of each layer are oriented are alternated in order to give the board more stability and resistance.
▶︎ What wood are used?
Mainly coniferous woods are used, among which pine and fir stand out. On some occasions also leafy species such as poplar or even eucalyptus.

[@nofatchicks2315]

Jig table my friend.

[@metal_stud_anchors]

Love this video

[@cadillac8597]

If you're building a truss to support the ceiling only....Why not use drywall grid? Or cold rolled channel with hat track?

[@ВладимирНихаенко-ъ4п]

Respect

[@Pedroggomes]

Buenos videos, perfiles drywall o steelframe?

[@obsoleteprofessor2034]

Do these need to be cross braced to keep from flopping over?

[@jayrobelo9877]

Probably still needs coil strapping and some sort of blocking to help support and increase shear strength

[@omyongsuwankul4410]

Increase the span

[@pongnaldy5859]

Vidio fullnya bang

[@PUTAI.machine]

Roll Forming for Drywall

[@fuq6939]

Trusses

[@user-rz3ed4ck5c]

흔들리는데?

[@Paunidas]

Menudas chapuzas por dios

[@cska5182]

How long is that thing

[@chrisk7118]

Maximum 6m

[@jonathanmolina3529]

What gauge are those steel frames?

[@programmer6428]

looks like 20GA or 18GA

[@jonathanmolina3529]

@@programmer6428 I thought so because I doubt 25 gauge will be that sturdy

[@programmer6428]

@@jonathanmolina3529 no kidding, 25GA would be 0.0209" thick, that is nothing. 20GA is 60% thicker at 0.0359"

[@alexkwai]

25GA

[@sov19871987]

​@@programmer6428, aahahah definitely not 18 or 20, probably around 24-26

[@Гера61]

Эээ,всякому делу-свой материал.Экономщик,мля...Один хер сдует,если торнадо придет))

[@xanitoxanito193]

Tengo mis dudas. Si eso funciona, los arquitectos e ingenieros están despilfarrando el dinero de sus clientes.

[@thomasschafer7268]

Der Statik Kaiser aus alu Land. 😜😜😜👎👎🇩🇪