Рет қаралды 1,418
Made boxed walnut floating shelves with a combination of solid material for the face and ends and walnut veneered plywood for the top and bottoms. All edges were joined using 45 degree miter cut. Usually I make these joints with the miter fold process, but I wanted to be able to see my joints as they were being made. Multiple and different clamps to assist in the gluing process.
Used mounting brackets which we procured on Amazon that worked very well. Links are below.
amzn.to/3HLqrTT
As an Amazon Associate I earn from qualifying purchases.
Contact:
instagram @oldguywoodworks
Etsy: www.etsy.com/s...
It helps when you buy the stuff we use:
Canon EOS R : amzn.to/3dlU2nu
3M Accuspary system; amzn.to/3dlXsH8
General Finishes conversion varnish satin: amzn.to/2AoskYV
General Finishes conversion varnish semi-gloss: amzn.to/3gDv2u3
Blum Drawer Slides : amzn.to/2XGcqB0
Blum Half Overlay Hinge: amzn.to/3cbYCn6
Blum Hinge Pocket Jig: amzn.to/36M7PRY
Walnut Edgebanding: amzn.to/3eyXcV9
CA Glue: amzn.to/3eyb2XV
Kohler sink: amzn.to/2zBMDlF