#HowToMakeAquariumWoodSink #HowToMakeBogWoodSink #HowToMakeDriftWoodSink How to stop our new piece of aquarium wood floating.
Пікірлер: 61
@lilyedgar42184 жыл бұрын
I just did this the day before Christmas 🎄 with my spider wood. Glued it with aquarium safe adhesive onto the slate, then covered the glue with substrate & poured the fluval stratum over the slate. Definitely like your idea too with the stainless steel screws.
@Crack_biscuits3 жыл бұрын
My wood always stays up ,but the Mrs is fine with that 😆
@DanielKeepingFish3 жыл бұрын
I'm guessing the steel screw approach is not the one you're looking for then. 😆
@DebTim4 жыл бұрын
Hi Dan... I enjoyed your walk through of methods. I have tried them all but my favourite is the screw it down method. I have also seen where you drill a few large holes in the wood and pack them with cement. Allow them to dry and wall -al!
@DanielKeepingFish4 жыл бұрын
Thanks Deb. Hey that's a great idea for larger pieces. I've never heard of that one before but I'll bet it works a treat.
@DanielKeepingFish4 жыл бұрын
Easy now folks. This is a re-upload of an older video. I've had to edit three or four to comply with new guidelines so will be uploading them today. Working on loads of things as ever though so plenty of new content on the way shortly. Thanks for baring with me!
@markd70133 жыл бұрын
I have a gigantic piece of bogwood. approx 4 feet long and maybe 2 feet high. its been fully submerged in a wheelie bin full of water for a month, and is still very buoyant. at this rate, its going to need at least 2 months i reckon. but it will be worth it eventually!
@DanielKeepingFish3 жыл бұрын
Yeah some pieces tank a long long time. I've had some take months but as you say soooo worth it once it gets there. 👍
@jackanddan10 ай бұрын
Checking out the old school wood sinking tips Daniel….. great tips sir🪵🪵💪💪😀😀👍👍
@robertfletcher34214 жыл бұрын
KZbin is going from bad to worse. It good Daniel that you are re-uploading them as we need these videos as a reference to deal with aquarium issues.
@DanielKeepingFish4 жыл бұрын
Yeah I didn't want to just delete them as I hope there is some useful information there. I don't think it's KZbin's fault for this. It seems to be a regulatory body has brought pressure to bare for these changes. Not quite KZbinaggeddon yet. 😉
@beastly_brisket_man62494 жыл бұрын
Most helpful video I’ve seen so far! Nice name by the way!
@DanielKeepingFish4 жыл бұрын
Sorry bud I only just saw this comment. Not sure how it skipped by. Thank you and your right. The name has style right? 😂😉
@stephen-truthseeker3 жыл бұрын
That's the best video I've seen on this.
@DanielKeepingFish3 жыл бұрын
Ah thanks Stephen. Felt great reading that.
@susanlynnrook93833 жыл бұрын
Brilliant! I’ve been struggling with one piece that will not sink! 2 bought at same time one sinks ones a floater! 😂😂
@DanielKeepingFish3 жыл бұрын
Haha, yeah some pieces are pretty stubborn. Glad you've got some tips there then. Some people have success using aquarium safe silicone to secure it to rocks, slate, etc too.
@meggrotte47603 жыл бұрын
hey thanks for the video it's great because I was thinking of using a piece of Driftwood and the center of my tank I'm rescaping it to make a guppy tank
@DanielKeepingFish3 жыл бұрын
Ah, hope the video gave you some ideas then. I know some people also use aquarium safe silicone to attach it somewhere, another wee option for you to think about. Good luck with your rescape, sure it will turn out great. 👍
@Ttblondey4 жыл бұрын
If the driftwood is heavy it needs more weight. Will that slate works? Especially my spiderwood is the size 3' tank.
@DanielKeepingFish4 жыл бұрын
You can get some pretty thick slate bud. The slate in the video is nearly an inch thick so pretty heavy. The trick will be to grab a piece that you judge heavy enough to hold it. You can also use aquarium safe silicone to attach it. 👍
@darthentity38334 жыл бұрын
thats an awesome idea with the screws genius lol
@DanielKeepingFish4 жыл бұрын
Thanks man. Can also use aquarium safe silicone if you find it easier someone pointed out.
@darthentity38334 жыл бұрын
@@DanielKeepingFish sweet thanks appreciate it mate but i seen that comment lol cheers anyways have a good day buddy
@FKJ_WORLD4 жыл бұрын
well said sir
@DanielKeepingFish4 жыл бұрын
Thanks homes.
@drinny262 жыл бұрын
I just set up a 20 gallon aquarium and filled it with water and put the drift wood in and now the water looks like light tea. Is this normal?
@DanielKeepingFish2 жыл бұрын
Yeah that's tannins. Like when you pour water on a tea bag kind of thing. Tannins are super beneficial, lots of properties that improve or maintain the health of your fish. Some kinds of wood leech more tannins than others. Some people boil or soak their wood first to get some of the tannins out but there will be less tannins in your water over time when you do your water changes.
@drinny262 жыл бұрын
@@DanielKeepingFish thanks! I literally just took out the driftwood and put it in the sink and filled it with boiling hot water and covered the sink. Lets see if it works!
@DanielKeepingFish2 жыл бұрын
@@drinny26 no worries. Depending what type of wood you have it may take a while or a few turns at it but boiling/soaking it will definitely draw a lot of the tannins out.
@kingteetv10743 жыл бұрын
Thanks
@aosundragonkiller114 жыл бұрын
Hey I've seen this before! Don't mind seeing it again though 😉
@DanielKeepingFish4 жыл бұрын
Sorry about that bud. I have had to edit three of four videos and re-upload them to comply with new KZbin guidelines coming in. Got a few videos half finished though so hopefully will get a new one out mid-week. Thanks for not minding by the way!
@lauradecker42132 жыл бұрын
What is the name of the blue and yellow fish at timestamp 3:05? And new subscriber here because of this video! Looking to get my first fish tank! Thinking 75 or 125 gallon.
@DanielKeepingFish2 жыл бұрын
The blue fish with the yellow edge to it's dorsal fin? That's an Electric Blue Acara. Wonderful fish. I'll drop a link to a species profile on it below in case you are interested in knowing a bit more about it. Also welcome to the hobby! So many good times to come. A few headaches too but the community is generally really good at helping each other out; answering questions and giving advice based on their experience if you need to ask anything. My advice would be always go for the biggest tank you cam afford or manage. Bigger tank = more water which means more forgiveness if you run into issues and also we always want more tanks/bigger tanks once we fall on love with the hobby haha.. Here's the species profile on the EBA: kzbin.info/www/bejne/d6LFcqVsebBonpo
@lauradecker42132 жыл бұрын
@@DanielKeepingFish THANK U EVER SO MUCH!
@Noobish_Camper55 Жыл бұрын
zip ties and rocks work to start. It won't be needed in a few months so might as well make it easy.
@Ttblondey4 жыл бұрын
Thanks.
@DanielKeepingFish4 жыл бұрын
👍
@markop.3460 Жыл бұрын
A later a later a later. That's cool
@DanielKeepingFish Жыл бұрын
Haha.. cheers.
@simonpidgeon9493 жыл бұрын
You could use thick clear Perspex it becomes less visible in your tank 👍
@DanielKeepingFish3 жыл бұрын
Certainly an alternative that may well work. Nice idea. 👍
@simonpidgeon9493 жыл бұрын
@@DanielKeepingFish I’ve subscribed, keep the videos and tips coming 💯👍👍
@PrisyoNationwide4 жыл бұрын
Oh this how to choose for aquarium.
@Perrinehope4 жыл бұрын
Thank you for your vidéo
@DanielKeepingFish4 жыл бұрын
Hey no worries. Hope you found it useful.
@Shaden00404 жыл бұрын
I like to get a flat piece of slate and crazy glu the wood to it then bury the slate under the substrate. Boiling it helps. I used broken up pieces of flagstone. Another method using hte slate and crazyyy glue I do works best if your tank has cross bar struts going from front to back of the tank, and I hang the slate over the strut with the wood in the water. This give you the effect of roots or branches hanging in the water. You could also secure the wood with aquarium sealant to the slate or use stainless steel wire to attach the wood to the strut directly.strut.
@DanielKeepingFish4 жыл бұрын
Yeah I think Gorilla glue might work well. I think we may have discussed this previously. This is a re-upload of an older video. I had to edit it due to new guidelines coming out. I like the extra ideas there especially the roots dangling in the water one. 👍
@ashokkolambe52854 жыл бұрын
Hey!!!! My friend gave me 2 drift woods..... which were used by him earlier.... but now its not sinking down.... so should i use the boiling method ?????
@Ttblondey4 жыл бұрын
It doesn't last long. Once you put in tap water it floats again
@DanielKeepingFish4 жыл бұрын
I don't think boiling it helps that much. It helps to get some tannins out but not so much to sink it. I would soak it for as long as you can it a bucket or something then tie it or weight it down till it's ready to stay where it is.
@kevywilliams33043 жыл бұрын
Don’t do the slate if you are not aware of your ph/ kh/ hard water parameters !
@faes64713 жыл бұрын
Slate is inert, but good thinking just in case!
@KimOfDrac3 жыл бұрын
Glued it to rocks and all was well for one day, then we topped up with some more water in the aquarium and it floated up :( now it's a submerged mess weighed down with rocks until it sinks by itself -.-