How to make Arduino colour sorting machine - Cadbury Gems - Indian Lifehacker

[@IndianLifeHacker]

Thank you for liking this Arduino Colour sorting machine Question about Arduino? Ask Here... Also Answer if you know solution of others Problem if I am unable to answer. Buy Stuff here: MG90S servo : buy.flyrobo.in/mg90s SG90 servo : buy.flyrobo.in/sg90 Arduino Nano: buy.flyrobo.in/ardn colour sensor: buy.flyrobo.in/clrsnr -Arduino Codes and Design : goo.gl/7XXDUr

[@rakhiniwas3502]

Indian LifeHacker bro check your gmail with a message from [e-mail]

[@grapesinnotech]

Indian LifeHacker can you give me the foam name ?

[@pritamsanyal3906]

In which stream i can learn arduino project.........can u tell me ?? I am 10+2 indian student

[@IndianLifeHacker]

Sheet I am using in video is called corrugated sheet.

[@IndianLifeHacker]

Pritam I have learned everything from internet, I don't think our education system can give this knowledge

[@farhankhan4810]

I am making this project but I cannot understand how did you connect servos and battery positive and negative terminals

[@MIZUKI-st7ok]

Heyy. I'm also trying to make this project can you help me with cardboard cutting and measurement please??

[@RafaelSantos-zc4kf]

bro please tell me how you connect the engines to the arduino since they have a plug ?

[@gouravchakraborty9801]

Is there any way to do this using Arduino Uno instead of Arduino Nano?

[@mr.perfect4476]

Why don't you try to give credits for the actual maker of these projects which you have stolen from? How to Mechatronics channel has done this project a yr ago

[@PerfectSPR]

Jaby fan .... bro you're right

[@PerfectSPR]

@@codeboi456 gravity is invisible and this diy thing is visible so get out of here and

[@toshityagi2018]

U r right!

[@ramanshupadole5323]

Yes bro

[@yogeshsahu7104]

What material you used for the structure please tell me ..😊😊

[@sabekunnaharnaboni1974]

can i do this with another color sensor?like apds 9960?

[@toshu259]

Nice to see you Parth and nice video too

[@IndianLifeHacker]

Thank you

[@akuthotasathwik2594]

Can you keep all dimensions cutting of board

[@nidhidubey9349]

Can you tell me if there is any existing product like this in market ....? I want to know its market survey

[@ClaudiaEstefaniaObregonCepeda]

Could you post a photo of the assembly with the arduino and selector?

[@grapesinnotech]

What's the material are you using for body making?

[@AdarshTheTechi]

Bottom servo not working what to do

[@garybhatia3218]

pls tell me how to allign the containers in which gems or stones will be dropped

[@lojiseleven4603]

What is the best voltage to make this project work.

[@sudarshan0507]

What material you used for structure

[@TECHSTAFF]

Sir why you add different 2 servo mortor

[@satyasanatan3795]

How vtg battery is use

[@jaynandaniya]

Which material is used for body

[@chandrakanthprabhu5567]

how to choose the brushless motor for drone

[@TechhacksWithsachin]

New invenstion i like really like.... 😀😀😀🤔🤔🤔🤔 By science and life.

[@EasyElectronics2412]

Waaahhh kya cheez banayi hai!!! Vaise muzhe yeh batao ki tum itna arduino seekhe kahase🤗

[@talha1943]

My top servo is rotating in the opposite direction but time intervals of the code are correct. Please help

[@jignathakkar7915]

The sg90 servo is not working is there any code error

[@hencydsouza]

Hello Bhai. Please rebuild the Arduino drone..

[@janaa.p.9903]

Which type of cardboard is used.??

[@keerthana.v0803]

Bro batter voltage ?

[@gregoryaudet3239]

Where do you find your music for KZbin?

[@yashasranjan8497]

What is that white sheet you used to make the body?

[@marshallmathers2046]

Sunboard hai vo

[@mihirparmar1006]

Sir what is this you use to control servo motor? Which look like a regulator at 04:30 (what is name exactly?)

[@primescienceprojects]

Servo controller or tester

[@yogeshchaudhary3585]

Can i use FS-CT6B for naze32 rev5 A friend told me that it won’t work for CT6B. I am already having issues connecting transmitter and receiver to board. Though all wiring is correct

[@anvay1008]

Bhai dono motor alag alag hai kya

[@smartagropalus2409]

Nice parth project i am first subscriber

[@solidguys9288]

Nice video bro I like it 😎😀😁😂

[@IndianLifeHacker]

Thank you for liking this Arduino Colour sorting machine

[@KSHITIANILKUMAR]

can anyone tell me how to connect it to the battery

[@darshangowda9054]

But how the servo motors saparate the colours at constant angle ?

[@soumyajitpaul1372]

Sir mujha aup se bath korne ha....may he project banaho or kuch problem a raha he....plz mujha reply kareya....

[@pritamsanyal3906]

You are too much talented

[@Yathracharitham]

What is the nane of the type of sheet u r using

[@IndianLifeHacker]

It is corrugated sheet

[@Joel_suwartik_wasekar]

Sir can we use Arduino uno

[@sajeevap3075]

Hlo give you please uploaded code for this project.. can't sort the colors..

[@soudaminibauri7866]

Wich software you use to edit videos

[@Joel_suwartik_wasekar]

Sir by this project my 2 servo motor get heated

[@huyang8044]

hi bro, my project have some problem, bottom servo motor is not working. Can you tell me why?

[@picky198]

Which language do you used

[@kishorreannanth5975]

Bro my top servo motor is rotating in the opposite direction.... How to rectify the mistake?

[@mendozalopezjeremygenaro6356]

Cambia los cables + y -

[@rafue7734]

what can i do if i get an error while uploading the arduino code?

[@anilgude8764]

Bro I want to do this project so please clarify some doubts

[@saranvj2222]

Which cardboard is this

[@fitness4quings192]

Hey great video. what is the material called

[@KaranPatel-jw5ti]

sir can you give idea to make a solar based intensity street lite automatic project

[@yeonk5346]

May I know how much have you spent for this project?

[@theRCiest1056]

Please druve continue a hexacopter drone series

[@robertocameto487]

Dear Sir. It is the 4th attempt I have made to go ahead with this project, following the instructions in four different sites in internet. In all projects a had the same results, when we test it, he lower servo motor does not move at all. Could it be possible to have from you some idea about this problem. Thank in advance for your help and suppor. Best regards from Montevideo - Uruguay Roberto.

[@charaf6777]

same problem

[@shajedurrahman5575]

Did you find any solution regarding bottom servo motor?

[@sridevammakrupe194]

using the breadboard and do connections vcc 5v and ground in bread booard and take the first servo pin to bread board and nano pin to bread board and dont connect second servo in nano pin you can directly connect in breadboard

[@ivanfernandes8775]

Does anyone have any solution for this???

[@syedluqman0608]

How much volt to make this project?

[@mahakhatib6367]

Can I use arduino uno instead of using arduino nano?? If not from where do I buy it??

[@chandrakanthprabhu5567]

can u make a ACTIVE TRACK MODE for the drone

[@nilimabhute9765]

What are you using at 4:29 ?

[@siddharthgholap3725]

It was just a potentiometer used to check weather servo motor is working perfectly or not.........

[@atharvapatil8856]

Bhai ye aapne material konsa use kiya hai support ke liye ??? Fiberboard hai kya .... Btw ... Big fan !!!👌🏼👌🏼

[@anilgude8764]

Bro please help me for this project

[@al-aminaraf4615]

Ossam project,!! Please make a video, "How to make a arduino calculator "

[@shilpraj6973]

Are you going to continue the drone series?

[@IndianLifeHacker]

It is on you people

[@shilpraj6973]

Indian LifeHacker I would love to learn more and more about drones so please continue that series. I want something to learn 1. Retractable landing gear 2. Obstacle avoidance 3. Different mods of flying 4. Installing LED lights I'll be glad if you make video on these things Thank you 😊

[@IndianLifeHacker]

👍🏻

[@harshavenkatasai451]

same request from me also bro.do it

[@anilgude8764]

Bro I want to do this project please do some help

[@Ashish_H]

Creative brother.. Keep it up

[@IndianLifeHacker]

Thank you so much!

[@primescienceprojects]

We tried the same diagram and code without any mistakes, but still it's not working

[@technocuber8483]

Bro but u told parth will do racing drone what happend about it?

[@IndianLifeHacker]

Will do it very soon

[@sayantansinharay9204]

Sir where can learn all these code ... I want to write these code by myself ... 😊

[@omaralejandrocardonarocha7209]

I have a problem, I already did the whole mechanism but... The bottomservo does not move to arrange the treats. I don't know if it is due to the sensor that does not detect the colors. I need help.

[@g-tron8557]

Tienes que ajustar la variable en el Arduino con ayuda del monitor serie

[@TodaySkate]

How many amps and voltage does this system run on?

[@mendozalopezjeremygenaro6356]

5v

[@MeenuSharma-wy1fn]

First time in India

[@Joel_suwartik_wasekar]

I have arduino nano but it is not working perfectly

[@SubSonic-gx2vx]

we need 6 batteries ?

[@brijnandanprasad323]

Carbon fiber propeller ka link plz

[@artnation1811]

Bhai mera bottom servo move hi Nahi Kar Raha... Can u tell me why.... And mera servo Aur sensor dono thik hey

[@ivanfernandes8775]

Bhai Mera bhi same scene hai do u get any solution for this??

[@randaynag4863]

Can u plzzz give the pic of connection

[@ayazkhanbaloch574]

I want to buy this project.. So what can i do.. For purchasing?. Plsss sir ans me fast..

[@yeonk5346]

Are u from UB and doing this for MAE334? xD

[@flyingtestinbangladesh6503]

How to Drone Sonar System video now I'm Waiting in Bangladesh

[@theRCiest1056]

and series complete after make apm quadcopter

[@khushalvegad2392]

Hey bro this color sorting project didn't working

[@Aditronics]

Very nice project sir

[@shreyashgaming1396]

Please make projects with raspberry pi

[@vikki525]

Plz reeplay Colour sensor work to detect mobile display wallpaper colour

[@aniketrajput3258]

Your code shown an error Undeclared identifier readcolour

[@Saransh-x7r]

Make a resistor sorting machine

[@shresthagokhale5472]

Please provide all information about servo motors and power to be supplied to the machine. here are common complaints about the drop servo motor not working. But the author has not bothered to reply it. Neither there is any contact number provided so that the needy person can take help. Not acceptable.

[@468-samirchunne7]

Sir I am also M. Engineer but I dont have money to make such projects So how u arrange money

[@sandeepkumar-kg3bx]

Bahut achhe bhai

[@34-sparshprasad8a6]

Amazing project

[@ShivamShukla007]

Waoow!! Thnks a lot mate! :)

[@artnation1811]

And yes mera Dono servo SG90 hey

[@electronic7979]

Excellent

[@prathameshkalaskar9250]

Awesome brother...

[@theRCiest1056]

I see what happen next?

[@sangeetachhabra2720]

I made it but it never worked, i am trying it from last month

[@priyanshukumawat5184]

Yes same with me

[@priyanshukumawat5184]

Can you help me

[@parthapratimchatterjee4961]

Plz make a mind control car🙏

[@sakshammishra6321]

Sir i wannted to buy a drone can you sell me any drone plz sir.

[@B8ndu]

Bro plz continue to make drone for cheap plz bro

[@IndianLifeHacker]

Will make it soon

[@B8ndu]

Awesome bro,, but can you please make a cheaper one

[@KakashiHatake-fl7oc]

You don't gave link for Gems

[@adnanahmadknowledgevideo]

Awesome video

[@IndianLifeHacker]

Thank you for liking this Arduino Colour sorting machine

[@rakhiniwas3502]

How do i contact you?

[@IndianLifeHacker]

If anything urgent than you can mail me on [e-mail]

[@rakhiniwas3502]

Indian LifeHacker bro i emailed you