HOW TO MAKE BUBBLE CANDLES USING SOY WAX | KERASOY 4120

I tried making the bubble candle with the Kerasoy Soy Wax and Rapeseed wax!
Supplies from - www.livemoor.co.uk - USE CODE KIMA10 for 10% off!
Worldwide shipping 🌏📦 Please check their T&C's
00:32 - What Livemoor sent me
2:23 - Let's get started!
5:38 - Melting the wax
9:21 - Adjusting the wick
9:58 - The Unmolding
------------------------------
Method:
170g-180g of wax
Heat the wax to 80°C
Add fragrance at 65°C - 70°C
Pour at 65°C
Leave for AT LEAST 2 hours before unmolding
Equipment:
Kerasoy Pillar wax 4120 - bit.ly/3EO4NMK
Rapeseed Wax 9562 - bit.ly/3oa8zt6
Waxed tabbed ECO wicks - size 2
Bubble Mold/Mould - 🇺🇸 amzn.to/3mTMxvk 🇬🇧 amzn.to/3D0mtEi
ECO wick calculator - bit.ly/2Yp90Hj
Wick Guide - bit.ly/3mTMqQq
Tips : Temperature doesn't have to be EXACT when it comes to heating. If you are having difficulties reaching certain points, you can be a few degrees off. - just keep a close eye on the cooling temp!
I've created a vibely account where we can all discuss everything candle related! Join me - join.vibely.io/xFTIjJ5eplb 💛
OTHER VIDEOS ⬇️
Which Wicks I Use For My Soy Wax Candles - • Which Wicks I Use For ...
Which wax to use for decor candles + wax melts - • Which wax to use for d...
CANDLE FROSTING | Tips on how to avoid ❌ - • CANDLE FROSTING | Tips...
#bubblecandle #soycandles #kerasoywax

[@onyaeonyae7]

I just came across your page for needing to sharpen my décor candles and you've been such a help. Thank you for taking the time

[@olesya8737]

The most informative video I've ever watched about making a bubble candle. Thank you so much!

[@KIMALONDON]

I'm so glad it was helpful for you! Thanks so much for watching 💛

[@carmelavicaria7129]

Brilliant tutorial thank you so much for sharing, I have just started making candles myself ❤

[@MadeInBelize]

Great Job. I like how honest you are. 3:45 I use my stick thermometer to make the hole in my moulds, then push the needle and or wick through. Pretty easy, you should try that.

[@aquaticassistantt9581]

I really appreciate you making this video!! It is super helpful

[@KIMALONDON]

Thanks soooo much for watching!

[@blushbaby6898x]

Amazing to see you again!! I hope you are well xx

[@KIMALONDON]

Hey lovely!!! Good to be back! Aww I hope you are all well too! 💛

[@tanyamack1481]

Thank you for this video. I am trying bubble candles for the first time so this helped. And by the way, you are gorgeout!

[@KIMALONDON]

I used Kerasoy 4120 wax in this video not 4130 which I meant to say is a container wax! I will go over in the next video how usually rapeseed wax turned out 👀 Thanks for watching! 💛🕯

[@Checaruiz]

Important tip 🤦🏻‍♀️ in order to be more efficient on time-work, use a microwave and set it for 3 min., if it’s not completely melted set it again for 1:30 more! Hugs and I hope this works for you as well.

[@roseg6703]

Good trick for stableising tricky candle mould shapes is put it a bowl of sand set it with some sand packed around the mould good to go.

[@KIMALONDON]

Great tip! Or even rice? 👀

[@remathe-beloved]

Thank you so much for how detailed and straight to the point you make your videos. New subscriber here😊 can I ask why you let it reach 80 degrees and then let it cool to 6something?

[@whoareu9683]

Heeey, love all the infos in your video. Curious though: did the wick eco2 turn out nicely? Aka the burn time was nice?

[@Cee_Cee8]

Great video just wondering if you have ever burned a bubble candle I tried to make it but every time I've tried the candle as the candle is burning it drip all over my candle plate. is it meant to do this? id rather it just tunnel down than seep out. any advise you could give would be great. my bubble candle has a 5 inch diameter and I've used tcr 24/14, tcr 21/12 gonna try an eco 0.5 and eco 1 tomorrow. I'm determined to make one for my mum for mother's day hunting running out of time 😬

[@sams.k.y3920]

what is the best degree to pour soy wax and how many minutes we have to wait so we can add the fregrance????

[@tayoajanaku9]

Hey Ik this is an old video but how do you get your bottoms to be flat? Mine ALWAYS sink in, I’ve tried heating from a lower temp and also heating my mold too but it still sinks, no matter the mold, the candle sinks.. any tips? Cause yours looks amazing

[@sams.k.y3920]

is the soy wax bearable to stand or it gonna melt by itself and it is better to pour soy wax into glasses or containers

[@aliciamarie3384]

What wick do you use for the 4120? If you don't mind me asking

[@Arigni_Handmade_Products]

I did this. But i got some rough surface. Is there any oil to apply in the mould? Pls tel me..

[@meekdevaserenitycandles9309]

Those bubble candles came out perfect. What do you put them on to burn them safely?

[@KIMALONDON]

Sometimes a glass plate, sometimes a mirrored plate!

[@AnkitaDas-ui7vh]

You're so cute ❤🥺 I can feel you. Wish you luck Love from India

[@KIMALONDON]

Aw thank you Ankita! 💛

[@meysak]

My bubble candles never seem to set on the top properly (so bottom of the mould) I’ve tried leaving it to set longer and I’m making sure I pour at the right temperature, tried putting the mould flat on the bench and ontop of something with the same problem. I’ve not had a problem with any other mould shapes wondering if you have any tips to stop this happening!

[@KIMALONDON]

Thats so weird! Never heard of this! Does it set at the bottom (top)? If you have pics, please show! (Facebook, vibely or IG) xx

[@kiarahenry3198]

Can i just use just Kerax KeraSoy Pillar Flakes 4120 without mixing any other wax??

[@KIMALONDON]

Yes!

[@andreeaflonta1096]

Hello, I really need your help! I have kerasoy 4130 pillar, I bought it because I saw you working with is. Is it me or it's not good? All of my candles are breaking. It's so frustrating. Please help me. I'm sad cuz I bought 20 kg, and it's not working for me...

[@chrisellis8045]

4130 isn’t pillar wax lol

[@delilapipoly]

🔔😍😍

[@nopasanada2613]

good girl

[@stonecandles8665]

Great video! We offer coconut wax candles and supplies. Check us out!

[@raniaranoucha4193]

Lady ... you're so cute and lovely ... watching u from Algeria 🇩🇿

[@majofalconite4537]

Thank you sooo much, this is the most informative video the I've seen/watched. Its worth the watch also 😇😇😇 #newsubscriberhere 😊😊😊