HOW TO MAKE CARBON FIBER LAMINATIONS TO BOW MAKING

A GREAT WAY TO MAKE CARBON FIBER LAMINATED
In this video I show how to make carbon fiber laminated to use in bow limbs.
It´s the simplest way to laminated carbon and you can got an excelent results.
I used the bi-direcional cloth carbon in the face that will be the face of the limbs ( backing and belly) and in the internal face I used unidirecional carbon cloth.
If you liked my work, consider to subscribe the channel.
Comments and likes are welcome because it helps a lot the channel grow up
Join this channel to get access to perks:
/ @indianabows
#ARCHERY #BOWBUILD #CARBONFIBER #ARCOEFLECHA #BOWANDARROW

[@labtrainer09]

Using the thick glass plates for the lamination was VERY clever thinking and seems to have produced good laminates. My boat-building experience strongly suggests that if you see an increase in the number of customers who want carbon fiber in their limbs and/or risers, an investment in a vacuum pump, peel ply, etc. would quickly pay for itself in reduced labor, the elimination of "sticking and prying," and even better saturation and carbon-to-resin ratios. For the average amateur bow builder, however, your method is close to perfect. It MIGHT be worth experimenting with one or two of the more advanced mold-release compounds to see if the laminate would "let go" of the glass more easily than with the car wax (or whatever) that you used. Just a thought, Chris (Maine, USA)

[@alangarch]

Do you reckon that two thick pieces of glass is the easiest way to create enough pressure? I am a fairly amateur Bowyer but love the look of carbon fibre on bows and seems to be a good material as well. Any advice?

[@fabiostorch1857]

Valeu Elison, obrigado por compartilhar este interessante processo. Com certeza no aguardo para o vídeo da fabricação do arco. Ótimo trabalho !!

[@IndianaBows]

Valeuu

[@nsa-arqueria2498]

Muito interessante esse vídeo. Vai ajudar muitos a fazer o seu próprio arco. No aguardo do vídeo de fabricação de um arco , utilizando estas lâminas. Parabéns.👏👏👏

[@IndianaBows]

Espero que ajude. Valeu... 😉😉

[@sigmanarchery54]

Very cool and really interesting thank you for sharing. Happy Easter. God Bless.

[@IndianaBows]

Glad you enjoyed it. =) God Bless you too my friend.

[@patriciasantosdesouza4957]

Parabéns!!!! Ótimo trabalho!!!👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@IndianaBows]

☺️☺️😘😘

[@user-om6dv7fn6p]

I like to see a full limb build with these carbon lamination, nice job!!!

[@IndianaBows]

Thanks 👍

[@JeversonRDias]

no meu antigo trabalho eu fazia laminação de fibra de vidro e de carbono, apresentou um ótimo trabalho

[@IndianaBows]

Show! Valeuu

[@israelbarbajuniorarqueiro8356]

Top demais!!! Com certeza quero ver a fabricação desse arco!!!!

[@IndianaBows]

Valeu brow. Tá na pauta. 😉

[@ttwil9810]

5 coats of honey wax would have helped with that release, and I would have added a few 2-3 strands of uni down the center of each strip. Have a few layups to try once I get going, would like to vacuum bag mine eventually

[@palavrasdoventania5371]

Ótimo vídeo! Claro que quero a continuidade.

[@IndianaBows]

Valeuuu

[@andersonmagalhaes8540]

Ótimo trabalho parabéns...agora quero ver o arco com certeza

[@IndianaBows]

Valeuu... Deixa comigo. 😉

[@tobiefick5147]

enjoy your show.yeah would love to see the bow finished

[@IndianaBows]

Thanks. I'll do it.

[@arcosulcapixabaarcosartesa5499]

Mais um aprendizado pra conta, muito show. Obrigado por compartilhar

[@IndianaBows]

Vlw brow 😉

[@joseniltonconceicaodossant1788]

Excelente trabalho. Parabéns.

[@IndianaBows]

Obrigado! ☺️☺️

[@andersonhorinouchi3932]

Conteúdo muito legal, esperando pelo vídeo do arco feito com essas lâminas

[@IndianaBows]

Valeuuu

[@Liliko789]

Muito top o seu trabalho 🤠 Gostaria muito de ver um passo a passo de um arco feito com essas lâminas

[@IndianaBows]

Valeuuu... Se o pessoal tiver afim, da pra tentar montar um. 😉

[@delixandresantos1836]

Muito obrigado por compartilhar conosco seu conhecimento.

[@IndianaBows]

Tmj. 🤜🤛

[@markopesic357]

We want it all. Make a bow man!😎

[@IndianaBows]

I did It already. 😉 kzbin.info/www/bejne/Z6DZqnRmjNBoa8U

[@adammclachlen213]

Great video. What kind of resin/epoxy do you use on the fiber glass?

[@IndianaBows]

Its a low densit (class A) epoxy resin. I dont know the brand but here in Brazil its sold by E-composites Store.

[@colinremmer2417]

Just subscribed. Love your work

[@RedmanOutdoors366]

Very nice 🙂💯👍

[@chir0pter]

this really coulda used some subtitles at least if you didnt feel like talking

[@littleHuey0007]

Yeah no kidding! I commented on that.. it's important to say what he is using and I said lose the crappy music and talk in the next video! Can't claim to have a how to video without materials and communication

[@bassemedres4470]

What kind of resin you used?

[@tafarellholleweger7736]

Claro que sim, e ja compartilho

[@IndianaBows]

Valeu brow! 😉

[@Maggioretom]

Nice one. May I ask some questions? Is that a warm dry chamber? There where you let dry the carbon fiber? And if it is, how many degrees is it set to? What kind of carbon fibers you used? And they were all the same or in different sizes? I'm talking about thickness, ecc. Thank you very much, but please: change music!😂🙏

[@musaadfelton3909]

May I ask, what are you applying onto the glass? Is it wax?

[@drrockenbach]

Show de bola. Duas dúvidas. É cera automotiva que tu usou para não grudar a resina no vidro? E depois usou solvente para limpar?

[@IndianaBows]

A cera que usei é uma cera desmoldante, propria pra ser usada com resina. Em lojas que vende resina se encontra os desmoldantes tbm. A automotiva até da pra usar tbm, mas é meio arriscado. Já perdi chapas de vidro por conta do uso dela. Já o solvente, é só pra tirar o excesso do desmoldante da lâmina e dar um pouco de brilho. Como no final só ia mostrar ela, sem verniz nem nada, quis limpar pra tentar deixar mais brilhante. ( O que funcionou mais ou menos. Rsrs.. )

[@arysoares9259]

Valeu mano brigado pelas imformaçao

[@IndianaBows]

Tmj 😉

[@robertyroberty9545]

Com certeza eu quero ver

[@IndianaBows]

Tá na pauta. 😁😁😉

[@ecoartsbrasil5147]

Yes !! 👏🏼👍🏼

[@rustamgani8914]

thanks!

[@johanhelberglongbowsknifes1185]

Hi buddy very interesting I tried once to make carbon sheets I put it on belly side it did not compress very well. Mabe if I put carbon in back side or middle of limb then it will work better and fiberglass for belly. How many sheets you used for this carbon sheet? And how thick did it came out? Great work live you bows. .

[@IndianaBows]

Thanks very much. I have some problems with compression too, but I discovered that was because the resin quality that I was using and the quantity of carbon. I find that 3 or 4 sheets works well, but I believe that if the areal carbon weight is bigger, than can be used less sheets.

[@johanhelberglongbowsknifes1185]

@@IndianaBows Thank you buddy my fiber glass I made was 1 mm thick and still works good like the Bo tuff fiber glass. I used the material cloth fiber glass not unidirectional.

[@arysoares9259]

Show mano muito bom Mesmo

[@IndianaBows]

valeuu

[@fharleyfroncada2973]

Obrigado

[@IndianaBows]

Tmj 🤜🤛😉

[@kaundinyagotramahadevputra3176]

Yes

[@fahlvfaust677]

What is different between high modulus carbon limbs(high end) and unidirectional carbon limbs(wns,samick,kinetic etc) i mean their spec..

[@hamasmillitant1]

would look nice on a horse bow :P

[@arysoares9259]

Gostaria sim de mais imformaçao precisa como faser isso

[@IndianaBows]

não é tão dificil

[@douglasalves2025]

Perfeito like no video, qual a marca da resina epoxi que voce usou

[@IndianaBows]

Valeu. Usei: RESINA EPOXY AR260 - ENDURECEDOR AH260

[@jandavidik9498]

Plastic film layer added in mule avoid sticked part

[@osmarxavierneto9787]

Qual é o valor de um arco seu ?

[@drrockenbach]

Muito top

[@IndianaBows]

Obrigado! ☺️

[@islandspicehawaii]

Kool video... what type of resin or epoxy did you use for the cloth? And what was that spray and finishing polish? Thanks so much

[@IndianaBows]

Thanks! I used epoxy resin that I found here in Brasil. But it will work with any good epoxy resin that you can find. For polish I used wax spray.

[@islandspicehawaii]

@@IndianaBows awesome...thanks so much!!

[@roldaofernandesbarbosa6284]

Boa noite amigo Qual o tipo de resina que se usa para fibras de carbono e onde comprar as mantas? Forte abraço e obrigado

[@IndianaBows]

Qualquer resina epoxy boa já resolve. O carbono comprei no mercado livre

[@roldaofernandesbarbosa6284]

@@IndianaBows Valeu, parabéns e sucesso pra vc Obrigado

[@IndianaBows]

Valeuu 😉

[@d_irgiefebrian8333]

What glue do you use to attach the carbon fibers?

[@arysoares9259]

Na construçao do Arco com essas laminas se possivel gostaria sim de asistir o video se possivel

[@IndianaBows]

Vlw... Vou tentar montar a construção usando elas.

[@rocaoffice9993]

Faz um longbow...

[@IndianaBows]

Tô pensando mesmo... ou um híbrido.... No tamanho que fiz as laminas, vai dar só de 62". Acho que um híbrido vai ficar melhor nesse tamanho.

[@arquerialouzano3269]

👏👏👏👏👏👏

[@IndianaBows]

Vlw brow 😉

[@vasilysh7558]

Напиши пожалуйста, какой ты использовал разделитель? Чем обработал стекло? И чем обработал ламинат в конце ролика. Спасибо!

[@IndianaBows]

I used a 2 face tape as separator. In the glass I used demolding wax to clean and prepare the glass. At the end, I cut, sand and clean with alcohol the carbon lams.

[@arysoares9259]

Como conseguir ou onde comprar esse tecido preto carbono por gentilesa se poder m ajudar fico muito agradecido

[@IndianaBows]

Em qualquer loja que trabalhe com resinas se acha o carbono. Eu costumo comprar no mercadolivre ou aliexpress, pois vira e mexe se encontra com um preço mais em conta.

[@arysoares9259]

Que Resina vc usou nessas laminas por gentilesa

[@IndianaBows]

AR260 da barracuda

[@danilopnovais]

vc vende essas laminas??

[@IndianaBows]

Só de fibra de vidro

[@danilopnovais]

@@IndianaBows mas tem como fazer um arco com fibra de vidro??

[@danilopnovais]

@@IndianaBows onde posso encomendar de vc??

[@IndianaBows]

Tem sim... Se quiser, me chame no WhatsApp [phone]

[@lawrencefranck9417]

A vacuumed bag would be easier

[@IndianaBows]

Yes, that's an expansive way to do it too.

[@lukart4051]

What kind of wood did you use?

[@IndianaBows]

In what moment do you mean?

[@tmoanpumba5487]

alot cheaper to buy it made at 25 US a strip.. its also on the bias that makes it alot stronger against twist.

[@IndianaBows]

Maybe you live in a place that you can find it easily. But to import here in Brazil, It Will arrive at almost $100 each because shipping and tax. With the same value that I could bought a couple of a full strips, we can got material to make six or eight Bows. 🤷🏻‍♂️

[@s177p]

вопрос главный. НА ХРЕНА весь этот цирк?!?!?

[@IndianaBows]

You're problable too dummy to understand.

[@tinkertom3683]

Who else could see that greasy finger print after he degreased the laminates lol school boy error

[@nealgrieb6660]

I'm sorry, but most everything you did here is just not correct and possibly dangerous. I only hope you were wearing a respirator while dry sanding the carbon fiber 😬. Carbon fiber is a great material, but particulates and splinters can do some serious damage. Be careful.

[@IndianaBows]

🤔🤔🤔 Carbon is like uranium?

[@alfonsoamador958]

It's made just like fiber glass. No biggie.