How to make Custom Party Plates| Canva Tutorial | DIY Custom Party Favors Dollar Tree Plates

[@alisavage9476]

There is NO WAY I would have been able to create my son's birthday plates without your help. THANK YOU times a billion!!!!!

[@HangingwiththeKiddos]

🥰you’re very welcome!

[@dessoryblack-hawkins8628]

I enjoy all the things you teach me to upgrade my kids parties. Thank you for your inspirations! You are awesome!

[@HangingwiththeKiddos]

😍Thank you so much for watching

[@jemeisha9091]

I just stumbled upon your page and I must say your page is everything! I’m so ready to venture into doing things like this. Your page is the reason my husband bank card will never be in his wallet again lol

[@HangingwiththeKiddos]

LOL thank you for watching !

[@D1vaDvyn]

Me too (12/23/21) ... I SUBBED immediately😁 and I am sitting here with a pen and notebook taking notes🤗 ... Thank you so much for this! You are a great teacher👏🏾👏🏾👏🏾👏🏾👏🏾 and I will be binge watching all of the other Vids too?

[@HangingwiththeKiddos]

😍Im soo excited to hear you all are finding the videos helpful. Merry Christmas 🎄

[@D1vaDvyn]

@@HangingwiththeKiddos I'm actually still binge-watching them right now🤗🤗🤗 ... I love his you break everything down and make it very easy to follow #URock

[@HangingwiththeKiddos]

Thank you soo much 😍

[@Shaynaj4]

This is amazing!! Very well explained and best of all, I LOVE a dollar tree craft ♥️ doing these for daughters birthday

[@HangingwiththeKiddos]

Thanks 😊

[@mizzgoldie69]

Thank you for this video. I am new to the crafting world and your step by step instructions were clear and understanding. I'm excited to try this for my nieces birthday. Thank you again

[@maquellewilliams2061]

Thank you so much for this tutorial 👑!!! I just started making party favors and I'm leaning soo much from you. I love how you take your time to explain and how to fix any problems that may happen. May GOD favor be with you and your family.

[@HangingwiththeKiddos]

You’re welcome 😊 and thank you for watching . God bless you

[@HangingwiththeKiddos]

Yes, I will definitely work on getting that video up for you guys.

[@kimrogers5136]

Thank you so much for this tutorial.

[@HangingwiththeKiddos]

You’re welcome 😉

[@keeplivingnyourrightmind]

Thanks! Very helpful!!!

[@HangingwiththeKiddos]

You’re welcome ☺️

[@pamelaturner1352]

The best video I’ve ever seen!

[@HangingwiththeKiddos]

Thank you soo much!

[@pinkbunnie57]

I was just going to ask if you have done this and…..❤❤❤❤ yep you sure did❤❤❤❤❤❤❤❤❤❤❤❤❤

[@lillielee236]

Thank you for this tutorial is was a great help u made it very simple an easy to follow

[@HangingwiththeKiddos]

You’re welcome & thanks for watching 😊

[@jacquelineholbert1767]

Too cute, just learning and I learned a lot. Thanks

[@HangingwiththeKiddos]

😍 thank you!

[@toripalmer1907]

Thank you sis!

[@HangingwiththeKiddos]

You’re welcome 😉

[@wandamichellelu8996]

Wow! Amazing LOVE all your videos!

[@HangingwiththeKiddos]

😊 thanks

[@adrianehill8291]

How sweet!! I love it!🥰

[@HangingwiththeKiddos]

Thanks 😊

[@HangingwiththeKiddos]

Thanks 😊

[@michyfloress7490]

Your good at explaining ty

[@HangingwiththeKiddos]

You’re welcome & thank you for watching!

[@asiaj4102]

Thank you for this

[@HangingwiththeKiddos]

You’re welcome ☺️

[@craftingwithcooki6667]

Thanks for sharing!

[@HangingwiththeKiddos]

You’re welcome & thanks for watching!

[@joetashaplummer1567]

First again!!!! Nice video 👏‼️🥵never expect less from you

[@HangingwiththeKiddos]

🥰thanks!

[@patriciadesamours258]

Thnk you

[@HangingwiththeKiddos]

You’re welcome 😉

[@trendylionesscouture340]

❤💛💚THANKS❤💛💚

[@HangingwiththeKiddos]

You’re welcome & thanks for watching

[@keyonharris7247]

I love this video but can you please explain to me how do I print out and cut if I don't have the circuit thing like what size should I print out

[@HangingwiththeKiddos]

Great question, It’s best to save your design as a PDF in canva this will prevent you from having to resize the design when printing. Open the PDF and print it as 8.5x11 page size.

[@keyonharris7247]

okay so if I save as a pdf I don't need to save the photo and put it on a 8.5x 11 custom before printing

[@HangingwiththeKiddos]

@@keyonharris7247 yes, just print the pdf also make sure your printer is set to print at 100% or "Actual Size." DO NOT check "Scale to Fit" or "Fit to Paper".

[@HangingwiththeKiddos]

Correct!

[@mizzgoldie69]

How did you make the box bigger to fit your circle. My box didn't expand to allow me to do a 6 by 9 circle Thanks for your help

[@HangingwiththeKiddos]

You’re canvas size should be at least 8.5 x 11

[@AccordingToCICELY]

Hi , I don’t have a cricut. Can I just print on a regular hp printer with glossy paper!

[@HangingwiththeKiddos]

Yes you definitely can do that and just cut out by hand😊

[@bridgetcochran5177]

Is your printer sublimation or regular ink that your printing with?

[@HangingwiththeKiddos]

It’s regular ink

[@Corikay842]

I’m on an iPad when I size my circle it does not show the size do you know why

[@aaliyahjones704]

Will you do a video on the cups

[@HangingwiththeKiddos]

Yes I will thanks for the suggestion

[@divinitysway5602]

Hi. I'm trying to design these custom plates for my daughter using Canva. I put in the custom size 7 by 7 but for some reason, when I get done the circle doesn't completely fit on the paper. It cuts off because it's too large and the design is too large for the middle of the plate. I will be cutting the circles by hand, by the way. Please help. Thanks

[@stephanieking7599]

What size plates are you using?

[@sunnyjean9388]

Is there anyway to seal the picture on the back

[@HangingwiththeKiddos]

I have seen some people use mod podge to seal the image

[@kaytaylor2365]

What was your size?

[@porshafoster8003]

Will these inches work for 10 inch plates?

[@HangingwiththeKiddos]

It's hard to say for sure, it depends on the specific dimensions of the plates you're using. However, you can try doing a print test to see if they'll fit

[@axelthewolf5185]

I went to make some plates for my neice first birthday.

[@HangingwiththeKiddos]

Cool, you should definitely give this DIY a try, these where Fairly easy to create.

[@axelthewolf5185]

@@HangingwiththeKiddos thank you!

[@Rennie998]

Is there a template for this please

[@Rennie998]

I’ve also got a few suggestions if it’s possible. Is it possible to do placemats for kids, cutlery pouches, invitations, menu for dinner parties with a lot of design please if it’s possible

[@HangingwiththeKiddos]

Thanks for the suggestions 🥳 I will definitely work on some of them soon.

[@HangingwiththeKiddos]

Since this is just a basic shape I didn’t make a template for it.

[@Rennie998]

@@HangingwiththeKiddos thank you so much

[@destinystouchllc.1571]

6

[@Camila-uq3wz]

Hi i have a question wouls you kindly help me

[@HangingwiththeKiddos]

Hey I’m always happy to help when I can feel free to ask any questions

[@Camila-uq3wz]

Im very new to your channel . And i just purchased a cricut air jus tto make chip bags for my daughter's 15 however it says i need to sreen shoot the pictures im not sure on how to do that

[@HangingwiththeKiddos]

Unfortunately, Design space is not the most user-friendly software to create designs you have to take a lot of additional steps because of design space print then cut size limitations. I highly recommend that you consider using Canva.

[@victoriascott454]

Why do you put it on the bottom of the plate?

[@HangingwiththeKiddos]

Great question I put it on the bottom because the ink is not food safe. you definitely don’t want anyone eating on the paper.

[@victoriascott454]

@@HangingwiththeKiddos thanks where u get the xyron from I have some plates I have to do next month

[@HangingwiththeKiddos]

I used double-sided tape from Amazon

[@lishamccants1373]

Nice but that lot work

[@HangingwiththeKiddos]

Thanks, it was a bit of a tasks

[@arriaryan6417]

Is it me or did she volume cut out

[@HangingwiththeKiddos]

Sorry 😞 the day I filmed this video wasn’t the best day for filming. I hope the video was still helpful

[@earlissamarable9551]

Thank you for this

[@HangingwiththeKiddos]

You’re welcome ☺️