How to Make Electric Bell from Recyclable Objects at home | DIY

An electric bell is a device that converts electrical energy into kinetic energy and then into sound energy. An electric bell has an electromagnet in front of which an iron armature is adjusted. Its one end is fixed, while the other end is connected with a hammer which is moveable. Nearby the hammer, a gong is placed in such a way that the hammer can beat on the gong. When the switch is turned on, the electromagnet attracts the armature. Due to this, the hammer strikes the gong and the bell rings. As soon as the armature is pulled by the electromagnet, current in the circuit is automatically switched off. In this situation, the electromagnet loses its magnetism and it won't attract the armature thus armature returns to its original position. The circuit is now completed and current flows in the circuit. The cycle is repeated again and again to ring the bell till the switch is on. Here's a video showing you how to make an electric bell.
Make Easy DIY Robotic Trolley Man Using Gear Motor At Home
• Make Easy DIY Robotic ...
Don't forget to subscribe our channel:
bre.is/pbACq4gH
Audio Credit:
Daily Beetle by Kevin MacLeod is licensed
under a Creative Commons Attribution license
(creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
#ElectricBell #DIYElectricBell #CSPDIY

[@ShrimpFry_Cute]

Came here because of school study ;( I hate my teacher, I don't understand any of these.

[@Excuses-rx4yc]

Same here 😭🥲

[@_marko7209]

Samees

[@arushisquad8322]

Old is gold we have forgotten about electric bell nice work

[@kiranjot7781]

❤️❤️

[@SS-vv1js]

Old is gold I am bold

[@leotheinnocentlion295]

What gauge is the copper wire??

[@sneak1071]

This helped me to complete my science project Thank You :)

[@tanvisawant4360]

I am going to do now

[@rampoddar1612]

Thank you sir... 😊 I do very well in my project... And I got 1 in my class... 😊

[@atcjapan9163]

Congratulations 🎉

[@ludost5178]

1? in croatia 1 is like F in america,so it's the worst grade.... i am not doing it for a school project,but as a hobby,but i do show it to my friends and physics teacher at school.

[@harshitasrivastava]

@@ludost5178 i think they meant first in class lol

[@varsharavi4707]

@rampoddar1612 can you please tell how much current and voltage did you use to ring the bell

[@rahuliyer_2290]

Hello! Can you please guide me on where can I find iron plates and the strips that you used for the attachment to the hacksaw blade and stuff? Thanks!

[@Motivational-Words672]

At your nearest electric shop

[@Tibulace]

I really like those sounds produced by old bells, which had huge and heavy sound tubes in bronze.They are no longer manufactured, they would be extremely expensive.But, I was determined to have a doorbell, with those sounds.So I recorded the desired sound on a flash drive.I used a Chinese sound box, which plays a flash drive, as a doorbell.The sound volume is great as it is amplified.There is a delay of about 4 seconds between pressing the button and hearing the bell sound.I have to teach the postman, because he has to press the bell button non-stop until he hears the ding dong.

[@KarthikP2304]

please talme wire size?

[@jayamathyjaya4806]

@@KarthikP2304 a Uig

[@mindofamir]

Quick question, can regular batteries that we always buy be used in this to produce the electromagnets?

[@makeiteasyblendsofspicesre4031]

It's can but it won't be a strong one and electric bell need strong ones

[@shamsulhassan5100]

From which you connect in last

[@theglyph1795]

Hi, my partner and I followed all the steps and the magnet just doesn’t work and it’s not attracted to the magnetic field. It might be that it’s not strong enough but we coiled it 300 times. Could you help?

[@allinone-yq5ol]

Same problem happened with we,then after many trial I found that the thickness of wire was not perfect,it could very thin wire,after that it works

[@waqashanif2073]

Hmm

[@leotheinnocentlion295]

@@allinone-yq5ol so what was the gauge or thickness of the wire which was working ?????

[@Prathamesh_Zende_]

@@leotheinnocentlion295 26 will work don't know perfectly but i think so

[@kanak42]

Same problem happen to me

[@lsdlsdk4845]

What is swg of copper wire? DC voltage applied? Size of the Nut and Bolt?

[@Doctor__19589]

Good

[@reshmasreekumar5146]

Yes

[@samizakaria5059]

well done . thanks

[@Beya-bx4jo]

Wowwww the best video of #howtomake....

[@ashishjain2500]

Thanx a lot it helped for my exibhition of science.

[@ambilisvidhya9319]

Where do you get this iron plate please

[@anjaligaikwad2028]

I'll not do this Its so hard to make

[@user-jy6jx2lu5f]

This helped me a lot in making my project. Thank you good man😊

[@budiwaloyo8426]

aku hadir bosqu, siiiip banget tutorialnya

[@jamaalyusuf299]

Thank you sir 🙏

[@chanchalsstudycentre3375]

Thank you so much sir

[@lsdlsdk4845]

What is the copper wire swg no.? Nut Bolt dimension? Your whole project is dependent on these two items and you have not even mentioned their respective numbers and thickness etc What is the voltage suppliedto the board?.

[@siswantoro7357]

Gambar di video pindah pindah terus marai mumet 😆

[@swadhinkrsaha4638]

How to make slow motion electric bell

[@nikitamore2003]

Iron is so hard how can we fold it by our hand

[@TheDinofGames]

Very thin strips can be folded easier than thin cardboard

[@pushpapatel2410]

Iska Cenection kisise diya hai bhai?

[@pushpapatel2410]

Bhai mujhe science ke project bana na ha i school me. So please , Peply kar na.

[@rushikeshpandey7215]

Apne konta gauze use kiya copper wire ka

[@jehovahtandiha9040]

Hey, thanks for the wonderful video. Am requesting for the materials needed to make an electric bell

[@VishwajeetJaiswal-iu6xk]

Mooh hoga par speaker nahi hai iske paas

[@KarthikP2304]

wire size

[@KarthikP2304]

enamul copper wire size tale me

[@reetatomar7636]

Can we connect it with battery not by switch

[@rngff2007]

Bro It worked perfectly at 12V to 24Volatage So try 12V to 24 Voltage You can take help of 12V battery or Charger

[@reena.sharma25]

Can anyone can tell me that the red base is made up of which material?

[@abhinavk99-f8l]

It's wooden board

[@shabbirantroli1438]

It is wooden board

[@ninjacraft1748]

👍👍

[@sushilgautam804]

can we use a 6W battery instead of DC socket and Jack ?

[@sanroku3014]

Didn't really work for me but if it does for you then please tell me how

[@milonsworld]

What is the size of the enameled copper wire you used

[@insiyamaksiwala9348]

Wire kitne gauge ka use kiye h

[@rbverma6853]

It can be made by battery instead of DC socket or not

[@Yusrayousuf411]

Please tell me one thing , if circuit is broken then current will not even reach electromagnet ?

[@khantanish8549]

No the current will not reach out to the magnet 🧲 Hope it helps 😊😊😊😊😊

[@avengers851]

I remembered when I saw the working of electric bell and it's working in physics

[@hinakhan53]

Can we use a battery of 9v

[@kyeethet9718]

Wire gauge?

[@shafiqurrehmanclassic901]

Plz give measurements of the things

[@rushikeshpandey7215]

Hey

[@luckygautam6246]

Nice sir

[@owencaralde9276]

Hi can you please make a procedure i need it for science project please

[@ashokkumarteta1331]

How many bolt you need

[@enjoylife6433]

How much ruppe did it need

[@kishansharma6826]

kya tum bata sakte ho ki tum electric bell kisse chala rahe ?

[@dipalimistry9311]

Hiw many volts is wanted to run it?

[@rngff2007]

It worked perfectly at 12V to 24Volatage So try 12V to 24 Voltage You can take help of 12V battery or Charger

[@dipakdevkota5490]

What should be the voltage of the battery

[@atrangizindaginamrta]

1.5 volt or more but by cell only. Not by direct current

[@ashaverma1451]

Can we use battery instead of DC socket , please reply 🙏

[@Barsha3293]

Sure. But it should be of minium 6v and maximum 12v

[@ashaverma1451]

Thx❤​@@Barsha3293

[@kishansharma6826]

kya ham dc socket ki jagha charger laga sakte hI

[@KPSRYTOFFICIAL]

Yaa but where we have to use these thing you didn't tell

[@santoshkanwar3718]

😂 bro we can use this in school science project

[@reetatomar7636]

It's not working... can anyone help Me

[@rngff2007]

Bro It worked perfectly at 12V to 24Volatage So try 12V to 24 Voltage You can take help of 12V battery or Charger

[@user-fg9cw1vl6m]

Bhai charger to bta do kitne volt ka hai

[@authenticindian5776]

This is my last minute project AKA when I have nothing to show as a project in physics in my school

[@TheArtisticArena-cs3mx]

Hello... does 9v battery work instead of dc socket and jack because I am unable to find it anywhere

[@user-du7jw5sp8n]

How much meter is required in Cooper wire

[@TheDinofGames]

Not too long

[@TheDinofGames]

Maybe 2m

[@leotheinnocentlion295]

How much gauge is the copper wire??

[@SS-vv1js]

12

[@SonamSonam-yb6rg]

I tried very much and got 2/10in my class

[@AjaySingh-df9rp]

😢😮

[@disneyregie]

How many volts was your power source?

[@Barsha3293]

6v to 12v dc..

[@leotheinnocentlion295]

@@Barsha3293 what gauge copper wire should we use??

[@ludost5178]

@@leotheinnocentlion295 0.5mm works best for stuff like this.

[@TheDinofGames]

I used a very thick wire

[@reyanshkatre9985]

My teacher told me to make a electromagnetic bell and i am in class 6 Ahh that had😢😢

[@rolexgaming8839]

Work nahi lar Raha hai

[@mohamadnurhak6930]

kok ak bicara video apa ini?

[@myshaafzal2858]

Mine Didn't work 😶

[@hamza-8978]

bro, do you have a mouth?!

[@ashishjain2500]

Bro do you have brain ? I don't think so that you have so go first and get it . Then you will know how hardworking the person iscause you cannot do the same thing. So if you cant appreciate don't insult him.

[@sanjaysood8154]

Actually he did not tell the measurements

[@AkshatS-fi5hr]

Bro do you have mouth?!

[@AkshatS-fi5hr]

Bro do you have eye

[@AkhilscollectionOfficial]

Bro do you have a nose 🐽?!

[@suklapaul4385]

9999999999999

[@AjaySingh-df9rp]

Jjb

[@Arunkumar-db6qd]

pagal ho kya kar

[@ashishjain2500]

Tum kafi idiotic ho kisine tumhe kuch kaha bada aaya.

[@Manthan_darokar]

This is fake 😢😢😢