How to Make Electric Bike with Drill Machine

How to make Electric Bike with Drill Machine
Music by NCS:
Track: KIRA - New World [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • KIRA - New World | Syn...
Free Download / Stream: ncs.io/NewWorld
#Bike#ElecitricBike#NDA
+ Thank for watching!
+ Please subscribe to view the latest videos.
+ Good luck!!!!
------NDA HACK--------

[@goldenstarmusic1689]

Absolutely brilliant example of keeping it simple engineering. No welding at all. Quite possibly the cheapest conceivable ebike conversion I've seen

[@scottmichael3745]

The hydraulic throttle alone was Brilliant!! Loved it.

[@rontron418]

i thought so too. I could not understand what he was doing. very cool

[@Leafyfpv]

^^

[@brentbuck9489]

right? so smart. maybe will freeze in MN but use different fluid.

[@sawe4207]

Pneumatik Not hydraulik

[@James-wd9ib]

@@sawe4207 Pneumatic uses air, this one is definitely hydraulic

[@mattjohnston5807]

High torque, 2 hour max range lol. Awesome ingenuity though🇺🇸✌️

[@kickinbilliards5971]

Sounds perfect if so. I have an extra drill and want to try this. 2 hours on one battery would be great since I could carry a days worth, no problem.

[@kickinbilliards5971]

Video is downhill, probably doesn't work.

[@ByteWave-fx2zm]

@@kickinbilliards5971 when you have the correct ratio and or a powerfull drill it should

[@DG-ss1gc]

Would like to see this done with a large battery and a three speed impact wrench with the hammer removed .

[@prithvirajkanne]

Two injection cyringes as hydraulic throttle ... Brilliant idea. Liked And Subscribed.

[@jiafengbattaglia7281]

Fafangulo

[@yg_8x]

syringes*

[@aljsegovia]

Guau! Simplemente ideas are the BEST. And you improved that by applying the Pascal principle. Awesome. Thank you for sharing

[@mrMaleAdvice]

That's amazing I have to try

[@peternicholsonu6090]

Great throttle system. I plan to not use chain and sprocket but fit small rubber wheel to the drill and drive straight onto the tire as I only drive on hard roads.

[@floweuphoria69420]

Thats what I wanna do to, mostly because i know I’ll forget and shift on to the drive gear with my old school tension shifters (thats not the proper name but not clicky gears

[@sanjumagar1084]

That’s what iam searching for ebike conversion kit 😁😁😁

[@firegamingboy2576]

Wow man your a genius, this is so simple to make and the materials are easy and ship to get. thanks man thanks

[@martinvargas1103]

you would probably try to get a #40 chain and sprocket on the other side, the electric motor might ruin the bike chain

[@raketerangnanaytipidrecipe]

Iniisip ko para san ung injection..para pla matulak yung pindutan..galing naman..

[@garybrown5500]

10/10 for idea. But would be interested to see how long it lasted before it fell to pieces. Needs more development I don't think cable ties will last. Hopefully you take comment in spirit intended as appreciate your video.

[@balazsrako9528]

I don't think this is meant to be an actual ebike. The battery is only 30wh even in the best case, so this will last you all of 20 minutes probably

[@Kopie0830]

@@balazsrako9528 20 minutes is enough. If you add a solar battery and build a solar canopy at the top, then it will take you a while to run out of energy.

[@MisterKaen]

Seems like really underpowered

[@7MinutesCreative]

*_Your new idea is amazing_* 👍👍

[@ashishkumarfreefiregamer4574]

Nice video

[@allusernamestake9368]

That throttle was cool

[@timetogame9570]

I like it i will subscribe

[@koppo5657]

My man just made a motorcycle out of a damn drill. Wow

[@latorrayjohnson9907]

Easy to use like it cause it portable

[@mickaolejuranewa8336]

The idea thith On of adapter ❤❤❤

[@X41N3]

👏 love the hydraulic throttle

[@hungrywolf4454]

Ideal for long journeys if your car breaks down.

[@jarikooper6325]

In my country it’s illegal to drive something like this but idc I’m gonna build it anyways. I’m getting a 3D printer soon so I can improve some things

[@leekzonyt9591]

U are stupid u will get arrested don’t risk it

[@jarikooper6325]

@@leekzonyt9591 yes I am stupid. But stupid ideas are fun

[@theonlycanadian5989]

Lol the only video they took of them using it was downhill 😂

[@shumailakhan5710]

I liked the way u used zip tie

[@KingTonio.94]

Remember snap on has a lifetime warranty lmao 🤣

[@jec_ecart]

Good concept. But how much will drill brushes last?

[@checkout5017]

Can buy a brushless motor and expect to get around 500-750 hours of use

[@MrHeHim]

Insert "it's something!"

[@controdadoenglish5760]

Making an electric bike using a drill is brilliant! But what do you think about my idea of ​​using batteries directly as I demonstrated in my video?

[@williamlatham1507]

And that is weak n cheap drill so the better tge better im sure u r epically awsome ly smart how fast it go and how long 1 battery last

[@AlexNuget]

I’d put a sprocket in the other side as drills should turn over like a freewheel, also meaning u can use the pedals as foot rests

[@maatiraouki9124]

c'est magnifique

[@asmaulasmaul7537]

❤

[@adeledazeem2561]

can i ask you, what is the part you use at 0:40? does it have one of those splines that lock with the gearwheel? im trying really hard to find a bolt/axel that could fit the gearwheel. (i have same gearwheel as you, m11. thanks

[@abdulrahmanabid1772]

thank you for this trick

[@seanbaskett5506]

The idea of a pneumatic system using $10 worth of clear tubing and syringe barrels to make a throttle linkage for a cordless drill-powered bike.......That out MacGyvers MacGyver himself.

[@CRaul87]

where can I find a sprocket like that? That interior profile, I see it can fit on other electric motor I saw... what is the name of that fitting standard on the sprocket wheel?

[@floweuphoria69420]

BUT WHAT IF YOU NEED THE DRILL TO MAKE IT?! Lol jk this video might be just what I need to get a job so I can afford the lawyers i need just to see my son

[@BoostedHamzExtra]

Tbf ill start believing this when they actually drive uphill instead of downhill lmao

[@carpediem19999]

my thoughts exactly i live in really hilly area that would last 5 minutes and id rip it off and cycle using my legs.

[@nickpinder3047]

I think you’d be very surprised by the torque from the drill. I say that having just built a drill powered go-kart and the 8ah battery I have lasts about an hour.

[@mcardenas3002]

@@nickpinder3047 video and parts list please...

[@evelinebroekhoff1135]

This thing is AWESOME

[@angelaomatheus819]

Thanks!!! Thanks a lot!! You are the first that no destroy the bike and made wihout hard things

[@robertseaward6822]

😂😂😂

[@youjustgotserved8207]

BRILLIANT!! SUBSCRIBED!

[@isaiasnunes2792]

Gostei porque é simples e barato.E usaria só quando for mais aclive para deixar bike leve.Poderia vir sem descer mesmo morro

[@Panarama1998]

In Germany Tüv say:"NO" 😅

[@alexburnside7838]

Goes walking speed for 1 mile!

[@jeffreythomas64]

Very comfortable with no foot pegs , plus a bonus chance of spinning pedals causing injury! Plus you have your drill with you for work when you arrive 5 hrs late pushing your bike , with your ass bleeding plus another couple hours to recharge drill .

[@casimiropalmar]

Es la conversión más barata y fácil de hacer que haya visto, no debe pasar de 80$ hacer este proyecto. Se puede mejorar con una caja para proteger el taladro y ponerle una chumscera al eje del taladro, para conectarlo y desconectarlo, en caso quieras pedalear o se acabe la bateria

[@kidsknowledgesms1676]

Super. 🥰❤️❤️❤️

[@talhashah1011]

I know how to make but i didnt know what setup ima try this bro

[@joymc]

You could maybe use a hydraulic brake lever as the throttle with the syringe on the other side 🤔

[@centpushups]

Should swap out the drill for a cord one and get a big camping battery.

[@Shimanto-zs8gv]

Your idea is amazing

[@Shimanto-zs8gv]

My cycle is going with the drill machine

[@theworstgamervr]

Drill would probably have higher RPM than an impact driver. But the impact have more torque for a much higher gearing to end up being faster. And my buddy has some snapped in half Dewalt impacts. Make a rack on your frame to carry few extra batteries. You work in the same town you live. Small town guy like me I could make it work cheap AF commute. Easily serviceable and honestly cheaper, far less power but still

[@afhaamraza9458]

You guys should build a company on this thing. If this thing will come in market once time so definitely anyone else bught this drill cycle

[@carryminatibangla420]

ssoooo nice bro

[@pizzazif]

awesome it really feels like my lazy ass could do this

[@nickcollop260]

Baddassss

[@sparrow9990]

This is how the hilbilys that somehow got money get arround

[@anonymousrobot8703]

Where did u get the gear

[@unionboliviana9969]

Ese tipo tiene 200000 de IQ

[@liamfitzsimons9246]

Could this be done with a beach cruiser bike? Remove the pre-existing chain?

[@angusmitchell3901]

Hello, I would like to know where did you get the bike sprocket that attaches to the drill? I want to buy one.

[@nkiruudenkwo]

Please I want to buy one

[@saketjoshi4476]

You can buy it from amazon or just google 9 teeth e bike sprocket. It's the 9 teeth sprocket that usually comes fitted with geared 250 or 350w china made brushed DC motor of UNITE conpany. For 250W the model name is MY1016Z2 & for 350W it's MY1016Z3. Both come with that standard 9 teeth sprocket with square key grove. You can also get 11/12/13/14 etc teeth sprockets that come on other china motors of same make, eg. MY1020 has 11 teeth sprocket. Though..... I don't recommend going for china products anymore after their gift of corona. Edit : PLEASE check the pitch of your chain as the sprockets come in different sizes. More specifically, the 250W & 350W motors with 1 step gearbox reduction come with 9 teeth sprocket & can be used with cycle chain directly. But 11 teeth sprocket on 500W motor (which spins to 3000 rpm & has no gear reduction like above motors) can't be used directly with cycle chain as the sprocket is small & required #25 chain. Cycle chain is bigger than that.

[@StationWagonGenocide]

@@saketjoshi4476 how about the axel that's fitted inside?

[@saketjoshi4476]

@@StationWagonGenocide which axel are you mentioning exactly ? And also how can I help you with that ?

[@StationWagonGenocide]

@@saketjoshi4476 it's the one at 0:39 . Any idea where I could look for that part?

[@greekgodsbody6779]

I'm actually going to make one of this, I swear! I'll do a video but first I'll make it to see if it works lol

[@jordanspyro1291]

This is amazing! Im so gonna try it

[@nda]

You will try

[@user-vy1zi7dj2r]

Como se le puede poner el taladro aúna silla de ruedas

[@Puuronkeitin]

Now i want to make that

[@rajeshkumar-qb6km]

Can you tell me for how long the drill machine gave it's complete time for you to travel when charged maximum

[@keepermovin5906]

However long your drill lasts

[@user-ez9gv9vd8q]

Интересно

[@alikbq6176]

По-любому фейк проще движок от мопеда оторвать и на велик поставить

[@keshlalish5586]

now i know what im gonna do with my makita when it dies out or i replace it XD

[@trevmoss1927]

Great idea ..but you put the chain connecter on the wrong way ..🤔

[@Nikola-pn2yx]

Cool idea, but you can't really properly use the bike together with the modifications because you can't shift to lower gears and your pedals are constantly spinning like on a fixie...

[@morgrimgaming7342]

Nikola Kragovic To be fair, I think that for a quick and dirty motor set up, that one could preset their gear shift so that they don't need to adjust mid ride. Also, the pedel spin could be stopped by simply putting your foot on them.

[@Nikola-pn2yx]

@@morgrimgaming7342 I agree that for a quick setup, it's really OK, honestly the idea is great, but the way it was made really forces you to just use the drill all the time while I think some pedal assisting in certain situations while still being able to pedal in others is way more attractive. More so because I doubt the battery of the drill can last a long time. Also, I don't think you can stop the pedals by putting feet on them, that's not how bicycles work or am I missing something?

[@morgrimgaming7342]

Nikola Kragovic The way most mountain bikes work is that the pedals can be stopped without stopping the gears. Helps the rider conserve energy on long treks. I agree on the pedal-assist idea. Personally, I'd find a way to mount that to the front wheel instead.

[@Nikola-pn2yx]

@@morgrimgaming7342 I think you might be wrong. The wheel can spin while the pedals are stationary. However, if the cassette is spinning like in this case(through the added chain by the drill), the other chain will spin the pedals.

[@wes326]

How about putting it on the front using a rear wheel with a sprocket. That way the rear drive is unaffected and the front electric drive would freewheel when pedaling. Plus less of a distance from the drill to the handlebar throttle.

[@Bad666Moon]

Should’ve hot glued everything and then you could’ve gotten rid of the zip ties.

[@ryanpknight]

Where’d you get the shaft from at 0:40

[@eyeballll]

Chain master link clip is backwards. Closed end should always go forward with direction of chain. No one else even noticed.

[@ollie4514]

where can i find that drill piece found at 00:40 that he put the sprocket on?

[@liamfitzsimons9246]

I made one by buying the gear part on amazon (just look up small gear) and I secured it on a bolt with two nuts on each side of it. Than just inserted the bolt into the drill

[@sciencemystery8507]

amazing

[@timothydmasten9417]

Hello, my name is CJ and I am currently trying to do the same project that you did in this video. Only difference is I'm doing it to a trike instead of a bike and I've got everything set up. I've got a powerful 18 volt drill already, got the wood cut out and everything set up with the water Powerline. But I'm not sure I'm using the right sprocket and or connector pieces that go inside the drill. Could you please get in contact with me and let me know exactly what the names of the parts are. I would greatly appreciate your help and any useful tips that you might have to offer. Thank you!

[@-._7]

I was surprised this didn't come with a parts list because the video is really good. Cool channel though, they have another e-bike video that has 28 millions views, that is awesome. This design is better and I think they could sell parts or the design plans, especially if they made a version 2 with the improvements that were put in a different comment

[@Kopie0830]

You could just have a machinist make one for you just show them this video.

[@augarstalkeroff1684]

👍

[@OneAngryLittleFucer]

I want to see what its like going up a hill

[@kevinrodriguez3588]

Justo como lo pensé pero quedaría mejor adelante para que no interfiera con las bielas

[@kobalasteriyan378]

How much does it last? How many KM?

[@stanislavgondek4161]

How long run it? Good idea

[@havenmcgarity1472]

Son what did you do with my drill?

[@liamfitzsimons9246]

Tried this myself and everything was working well and wasn’t very difficult except my chain keeps coming off of my gear on my drill. Can’t seem to keep the chain from popping off.

[@charlesmurray3255]

You need the chain to go through a narrow opening, use a bigger bit of wood with a hole for the chain to go through , on the feeder side.

[@aarondavis7526]

Were did you get the sprocket for the drill

[@NitrousFox]

Try an air impact next 💀

[@YouTube_StoryTime241]

How many km can go per hour

[@awjnck204]

please, just remove the casing to the drill at least lol

[@darwinjerald5793]

That drill michin power posible for fore weel.?? Tith sterig. Like car.???

[@deanlakhoua8788]

how fast did you go in mph

[@joeyhillers9460]

I like your idea, but I have a few improvements that I would implement. Number one make use of a larger driver gear. Number 2, make use of the rear derailleur, that way you could have better speed and battery life. 3, get rid of the pedals, I like that you keep the theory for legality, but if you ever pedaled that bike without a break in drill chain, you’d kill it, Comment: Good job on the zip ties, although a better fitment could have been done with 3d printing. We have the technology!

[@tatwood93]

WOuld be better to keep the pedals and add a freewheel on the drive sprocket.

[@-._7]

@@tatwood93 This is the way. The world needs v2 of this bike with these improvements.

[@tatwood93]

@@-._7 Definitely, the syringe idea is pretty cool and might be useful for other things, but I'd rather run the back brake cable to a pivot and have it run the trigger off the brake lever as well. Maybe hose clamps instead of zip ties? I'm completely down with using wood though, KISS method

[@wondersagar]

Wow ,I am watching this at 1:15 am in the morning ,I am sure I will try to make my future bicycle like this 👌

[@simpigupta2374]

Smart watch pe video banao please under 2000 or 3000

[@ulhassawant7700]

What about battery power? How it continue running without battery power.

[@user-xp4xl5zt3t]

Se puede usar para subir cuestas

[@user-jk4mi4ns3n]

Attached the drill now i have no drill to make holes

[@incinerater8396]

Can you still use it as a normal bike?

[@theflipbox7767]

When he rides he looks like he's starting a match from prop hunt

[@ReadingAreaRailfan]

You better be super light or have a giant drill because that thing won't last 10 minutes. And where do your feet go?