Build Electric Bike at Home

i use
Drill Trigger Switch
36v motor
18v battery
Amazing || PLIER Invention DIY !! never exist before
• Amazing || PLIER Inven...
Know More Subscribe here:
/ drhacker-com
Business or Cooperation
[e-mail]
Check my Other videos :
/ @diy.invented

[@existingman3000]

Some information subtitles would of been useful, I'm not very good at identifying such electronical parts by site. What type of motor are you using, what vultage is the motor? And where can I get one, and what was all the other parts you used and where/how can I get them please?

[@wrath_oflists3614]

Dont bother it doesnt work

[@mtwseneca]

What you need to do is gear the motor so it spins up to it's rated rpm at around 20 to 25 mph, making that your top speed. What you have is totally wrong, even the motor sprocket is way oversize- you get very little power out of it and will burn it out if used very much. I don't remember the ratio I ended up with on my similar motored bike but it probably was around 15 to 17 to one (the motor spins that many times to one rpm of the wheel) for a 26" bike wheel. I put a vid up on my channel of my bike.

[@yahya-zr1yw]

So he should add higher gear on the motor right?, correct me if I'm wrong because I'm about to make one

[@mtwseneca]

@@yahya-zr1yw He needs the smallest sprocket he can get on the motor and the biggest he can get on the back wheel- even better would be using a 20 inch set of wheels which would help the motor spin more. Remember to use V brakes or better on both ends.

[@yahya-zr1yw]

@@mtwseneca ok, any other thing to mention?

[@waltbeasley5878]

The concept is good, but the battery used won't last long enough to go far, and not sure if that motor is strong enough to use on more than flat services. Going uphill on even the slightest incline would drain the battery quickly or the motor just wouldn't have the strength. Nice idea though.

[@JimmyGresik]

Exactly! These motors needs 24V to 36V and consumes from 250W to 500W depending of model.

[@JimmyGresik]

Dominic Lee You’re wrong about this.

[@R.B.forMER_S.]

He must be new to what an e-bike should be... thumbs up for doing it cheap or for whatever he had lying around the house E-bikes need a brush less motor controller too not just the battery and motor. The lithium ion batteries that are used for an e-bike usually have a BMS for good reason. Why not have a single freewheel sprocket wheel in the front...it might fit that way it won't rotate the crank + you could help the motor when going up hill

[@R.B.forMER_S.]

@@JimmyGresik 24Volts is most likely the lowest for an e-bike I'll give you that👍

[@radfordra]

That particular motor is a brushed motor. Needs a brushed motor controller.

[@soundwavesaudio1]

I'm going to call this a fail

[@Jay-mz5es]

HUGE!!!!!!

[@rohithchakka6598]

Yess ur right it doesn't make any sense

[@danmoore4933]

LOL, I agree. Big Fail!

[@franciscogustavo2058]

pig work

[@1ja2ja]

A better battery and you have more power

[@henrrymartinez5468]

Podría ser mejor si le adaptaras el piñón trasero al otro lado, la idea es que el sistema eléctrico ayude al mecánico.

[@motivasik]

1 : 1 gears hurt my balls... But a nice try mate!!

[@CalebGibbsAvenue]

I personally tried this before even watching this video! Good idea? It's definitely a fail ,doesn't work even if upping the voltage. You're better off getting a $25 motor controller and voltage regulator! I blew up my (drill trigger) after running it only a minute it burnt my hand through my gloves! Plus the gear sprocket is way too big no torque at all I did the same thing! Use a 12 tooth sprocket! This was one of my own ideas, I'd like to say it was a good one but I can't!

[@davidromero2477]

La idea es muy buena, namas practica un poco mas la estetica

[@dantecalipara3384]

Not good idea...you still have a pedal rotation when you use the motor,,I think you need to improve it like put another free wheel sprocket to avoid the pedal include working while you used the motor..

[@scottsather1041]

Can’t switch gears. Thankyou this gave me a couple ideas on my next build

[@hantusbik]

use a large gear over the size of a plate so that it can go fast after riding the load. You can install it to the left of the rear wheel so that if the electric motor is active the bicycle pedal doesn't turn.

[@hassanal-mosawi6049]

Thanks for showing how and sharing that, well done!

[@renereyes419]

sir can you help me to list down the parts converted to electrical bike thanking you in advance

[@TheCraigy83]

Run the motor on the 22th on the chainset 🤨 wtf would you run it to the rear sprocket you mad man.. cut the crank arms off 🙂👍

[@ddaavviiddttaaaaffee]

Groan. Use a few laptop batteries 29 or so. Use an industrial motor. Say for a grinder.

[@TopdogPlayz]

“A few” “29 or so”

[@Ty420]

🤣

[@Ty420]

@@TopdogPlayz 😂

[@bigzen69]

Add about a dozen more zip ties and some of those self tapping screws and maybe a chain guard to protect your gonads

[@naoyukisasanami]

How about driving the other chain ring on 2x or 3x drive?

[@michaelhays2158]

Have u got to move your feet off the crank to use the motor?

[@zombieapocalypsecherokee9224]

Run the chain directly to the crank gives you more gear options

[@carloslewusz8983]

Excelent idea. Thank by share.

[@grimyboss9647]

That is exactly what I said where is foot going to stay

[@davidanderson6222]

I made a small fan using the drill speed control, it got hot as hell. Can’t imagine pushing a bicycle with it.

[@WeirdScooterKid]

David Anderson I tried doing the same thing and mine blew up lol

[@sheilareyes4847]

No good the tongue of your ebike is very weak can t pedal I rate fail

[@robertbennett5192]

How do ya get the pedals to stop?!?!? Just use highway pegs for footrests?!?!

[@shed.projects5150]

I think with the right cog set up and a decent motor attachment bracket, you could be on to a winner.

[@jarmooigus1836]

the same system should have been on the front wheel then the pedals would not go!

[@btsambtsam9244]

كيفك

[@dougwiedinger1517]

how far you think your going to get on that drill battery ? and that's just the start of thing that are wrong ...

[@feyolopez2520]

what if you want to go fast, really fast.😨( Foot movement 😅😆)

[@robinchowyen]

how to get the sprocket for the razor motor

[@skydrones2012]

Remove front chain drive so you can now use only the motor to push or add a freewheel on the front crank

[@maximodossantos3998]

Ficou uma porcaria

[@markdanielentia8830]

may be you made another gear at the left side so that you can still neutral the pedal while you re moving 😁

[@beatsbytani7875]

Otherwise he will chop his feet 😂

[@razacksossohou3943]

Hi how are you? Where are you from ?

[@Huss.T]

yep he need to

[@stephaneden1426]

Oui ,tes pedales devraient être indépendante,et puis ta batterie a l air trop faible

[@CYouToobTheChannel]

Honda Street hain...bina engine ... Isko 1000-1500 budget mein ek battery cycle ban saktha hain kya?

[@21dogx]

that sweet stuff homemade especialy

[@nagunaks2222]

You can mount a flash light or something and then just be able to pop the batteries in and out like normal. No risk with loose wiring battery harnesses

[@BenStuante]

You put the chain in top of gear, thats why the wheel wont circles fast

[@allexandruprroca6713]

Wow , forward . Use higher gear reduction and higher voltage

[@frostgold8166]

Appreciate what people make of themselves

[@antoniogonzale3033]

Hello what speed does it reach or how much torque does it have?

[@tomothyparziale5655]

Its gear way to high. Thats why it doesn't work. You need a motor that has a gear reduction.

[@philos1917]

You need a reducer or power transmission gear system because putting it directly to the bicycle sprockets reduces the torque and a drill battery is not enough.

[@carlosmorais2578]

Não funciona. Não tem força para mover o sistema. Precisa de uma caixa de redução, que pode ser feita com peças de bicicleta

[@PepeOy]

Amigo te quedo buenísimo, solo que con un motor de 500w o mas y una batería de mas potencia(Amp.) te daría mas poder, pero en si esta muy bueno el proyecto.

[@brianrosalez345]

Una pregunta amigo de dónde consigo un motor de 500 wats?

[@traptrap1968]

He knows it needs a stronger battery obviously but it shows what you can do with serif you already have. I think really cool. Hopefully makes people's brain starry to think. Can you click it out of gear with the hand controls ahead on the bike? That alone would reduce drag friction etc and help especially with better battery

[@DebuSuper]

NICE man i know this took a lot of time to make and it has good potential if you make another im sure it will be even better!

[@adelcioveiga4075]

Única coisa que o pé-de-vela gira o tempo todo em conjunto com a toda. Mas é brilhante

[@EricRobb]

how did you make the sprocket

[@rgap3944]

it should be front wheel drive for good controll

[@ericmcginnis9413]

I have the same motor and was thinking about doing the same

[@kd29bhinmal]

Which battery u have used

[@Fedeee__015]

Why did you connect the motor to the pedals?

[@Rob337_aka_CancelProof]

Could you please share with us a rough estimate of your top speed using that configuration and estimate maximum range using that battery because the plug-and-play aspect of that battery arrangement it is very appealing to me

[@Ovesundbergh]

Top speed was about 2km/h and range will brobalbly be on a good day 90m

[@jackcannings4782]

@@Ovesundberghhow is it tbat bad?

[@domenicoritoli583]

il collegamento motore ruota deve essere indipendente dal movimento pedali

[@conorhulgraine]

The sprocket on the motor is far too big if he used a smaller one it would be much more torky

[@eliaspinheiro9929]

Quanto custa esse kit, pra poder colocar na bike ?

[@maxmott7489]

How long the battery lasts??

[@anthonylopresti3078]

Very crafty but at that speed and practicality I think I’ll just walk lol

[@makeitathome1327]

Ok hopefully someone can help me with this. So im trying to build an electric bike too and i ordered a 24v 350w electric motor and a 22.2v lipo battery. The battery's connection is a xt60 plug and the motor has these a black and red wire with this golden thing on it to connect to a battery. Since the connections for both are different, I bought a xt60 to wire adapter so that i can plug the battery to the adapter, and the adapter to the motor. So to test it, i touched the adapters wires and the motors wire ends together and then there was a spark and a small fire. Can anyone tell me how to fix this?

[@mahdisadeghisadeghi6814]

best ebike iv ever seen

[@lifeyang2]

There's room for alot of improvements

[@martynasliepinis2715]

What parts do you use

[@maryhornbostel6959]

I would have used a charger mounted to the bike so the battery would be easy to remove to charge or to take with me when I went inside. You also need a one way bearing somewhere in the system so foot pedals don't turn when using motor. I wonder if a troling motor would power a bike for assist on hills. They are made for wet environments.

[@SERGIO421016]

todo bien le faltó Transmisión hecer de cuenta ,empezar a mover un carro en 5a.

[@eduardohowcomedf6971]

hello from southern California question plz. I have same motor as on this video you added on bike , How can I increase the power speed to motor ? I weigh about 175 lbs , and I tried a basic car battery on this motor and battery fully charged still it had no change on increasing the power or speed , what can I use to give this electric motor like power speed ?

[@jackcannings4782]

Controller

[@adelmofranco1781]

Eu gostaria de saber qua foi esse motor que vc usou na bicicleta

[@ericmcginnis9413]

Why not run it down to the gear on the pedals? Was there only one

[@tenochcan]

para cuántos kilómetros o millas es????

[@cheikhtidianeniang6755]

le plus simple des vélos électriques= the most simply electric bike

[@eduardowladimirquenacondor9095]

eu gostei do seu trabalho....muito creativo e inteligente reconheso qe eu tanbem eu so inteligente.....parabens....

[@AlDavis-oo4jj]

This will only work with a single speed coaster break bike. You know, the kind your Grandad rode.

[@scottsather1041]

Al. Davis nope. You can mount the motor just above where the pedals & crank would be. Just remove them. Only issue will be if the chain is compatible with the motor sprocket.

[@joadirdasilva5461]

colocar uma coroa no lado esquerdo não teria esse problema de ficar girando pedal. ficaria tope.

[@hedsonvillacorta9312]

De cuantos voltios es el motor y la cosita q le da energia ?? Xfa gracias

[@henningbergmann5494]

*Handy product. Works well.*

[@ranaafaq842]

thanks sir for such a nice guidance

[@michaelngandu9000]

It's a good idea but how do I access the motor and battery

[@yaqoob1972]

Increase the radius of the wheel on which the chain sits

[@rigodelgado1429]

How many volts is that motor

[@user-mb3up4oi1t]

Good idéal with good batteries are regulator would be great

[@Livefreeman]

where to get sprocket? what size are sprocket

[@hristiannovev9393]

you need ... a bigger motor and a battery

[@thebestaligirisken63]

He needs ... learning how to ride bicycle

[@hristiannovev9393]

@@thebestaligirisken63 he actually need to use his legs that little motor is crying

[@TheDoug9901]

Friction drive on front wheel be better

[@marypacheco5687]

Donde compro las piezas?

[@ericmcginnis9413]

Get yourself two pmwdpwgddjp batteries and string them together so that you get 24 V that's what that motor used originally

[@Zephyrian1st]

chop off the chain for the peddles, parallel wire a few more batts, tick weld the peddles so they are static, boom u good

[@eduardobernaldo2198]

Esta chévere como lo armo la bicicleta y el motor de cuánto de fuerza es

[@joseambriz7718]

Use a gearbox lije 3:1 ratio

[@jaygibson469]

I won't be getting this time back that I have wasted watching this video, this was truly shocking the guy could do so serious damage to himself if he got his legs caught. Stay safe people

[@user-kq5xp4cl1g]

And how many kilometers will a screwdriver battery last you?

[@Dailymotion44-nb7hl]

Good effort 👍🏻 but you should more work on it best of luck

[@williamalvarado3960]

Hola amigo tenes el circuito electrico de la bici

[@ddrusa]

Simple I like the idea very cool thank you for the tip. I would not mind trying this on my bike

[@kentzy6814]

9:48 looks like 50mph speed but the true speed 9:25

[@lutakmali6234]

simple, nice job, just need stronger engine and battery

[@ronaldoalves8102]

Qual foi o tipo do motor que você usou brigado

[@orlandovelastegui1391]

I Rather buy a Bafang motor it comes with free wheels so you don’t have to pedal. Nice job but, you can’t keep your feet on the pedals.

[@autobiografiaenvideo8162]

pues si se mira que corre, pero los pedales se mueven mientras le acelera el motor, como que no vas a tener donde apoyar los pies mientras acelera

[@rubensoliver2752]

ow powerful is your engine?

[@mannyluna1066]

you should be using geared motor rated at 250 watts

[@mga5199]

Omg , so fast

[@marobergl8484]

Pregunta no queda en neutro?

[@jayvlog9841]

Can you make step by step install how to

[@patrickkiarie1047]

Motor voltage and watts plz

[@Rob337_aka_CancelProof]

Instead of going from the Motor to the back wheel with a direct-drive single gear setup couldn't you go from the motor to the smallest sprocket on your front chainring moving the other chain to one of the other two sprockets and take advantage of your back derailleur and cassette with 7 gears you could Leverage to get a lot more bang for your buck out of that like a mid Drive?