How to make Enhanced Bubble Pumps for an Organic Pool

[@j_larusta_8825]

Channels like this are why i appreciate KZbin.

[@eco_guardian]

You truly are a mad scientist - complete with appropriate hair. Great work David.

[@barnabydinosaurroadsafetyp3457]

Often wondered what English do on days off .. build a capacity bubble pump obviously .. te he

[@jozeffekiac]

Could play the next Dr. Who. TARDIS with bubble pump!

[@mydanishgarden3112]

Hi David, love your videos and pool designs. One suggestion on the hole drilling, when the hole cutter gets the bite on the plastic pipe, stop the drill and put it in reverse. It'll give you a cleaner edge and there's less chance of the plastic breaking. Keep up the great work. 👍

[@ozarkdaredevils]

You are a trooper , i watch for the information but also for the showmanship..........

[@archeryman62]

Can honestly say, Sir , you are totally outside the box and I love it!

[@unclegeorge7845]

I really enjoy your videos. I'm converting a concrete pool to a natural "kinda" pond and I'm using air. My 80 liter pump at 700 watts for lunch all day and night long. I've discovered building a drain field under six feet of water is a bit more challenging than a dry fit and then submerging. SCUBA along with 30 pounds of weights is part of the fun. Thanks for the fun and motivation David,

[@stevep2237]

The trials & tribulations of the PagenButler. Another great informative & thoroughly entertaining video.

[@Sithehandyguy-London]

Iove the bog monster at the end. 🤣 Great work and inspiration for my next project. I'll be sure to do my sit-ups before rolling the camera though.

[@unclegeorge7845]

Another wonderful video. Your casual absorption of momentary false steps makes me ready for any project that catches my fancy. Thanks for your great attitude.

[@CAOHnutrition]

I really like your airlift ideas, they seem to work more simply and I would imagine at less cost!

[@MAKIWEAR]

David I currently Live on 5acres and this is something we've talked about doing for a while now, thank you for your explanation and i hope you continue to make more videos. Your such a Human being.

[@Kelsdoggy]

Man that must be COLD!!! You got in that icy British water like a boss.

[@nonyabusiness9747]

I Really appreciate your ingenuity and sharing your ideas. Thank you

[@tickytacky8078]

Giant aquarium, Hamburg Matten Filter. Nice mate. Glad you're following your passions

[@Allgood784]

In the cold too. Couldn’t wait until summer😂. Thank you I will give it a try and see how high it rises for some above pond plant tanks I have:

[@merlin3381]

My summer project is making a fresh water pond. It's good insurance if the power went out for a while. You have inspired me to do it. When I finish I think it would be a good idea to added fake plastic lillies to the surface of the water to keep the algae from spreading.

[@hamsterman32]

Why not real ones?

[@johnmcginnis5201]

I might suggest a spa blower. Much more efficient that the typical piston compressor. I have had them work to 4' depth maybe deeper I have just not have the need.

[@dadejazzba402]

...blower would be cheaper to run

[@MrBsmurfy]

Hi David. Have you found the increased draw through the planted zone is necessary due to root development over time obstructing flow through planted bed? Do you feel at this stage that you have reached 'steady state' development of roots/obstruction or that you will need to periodically excavate parts of planted zone to remove this extra sediment? Or have you revised how many recirculating loops you install in future builds? regards, Brian

[@AndrewJames92]

Would love to see this answered

[@738rh]

I would wrap the land drain pipe in biddim first

[@franram7426]

Easy fix for root development..... Pump or siphon the water level down below the gravel planted .... After harvesting some plants for the restart, let it all die. Then start over. Probably....an every 3 year project that takes a month in the hottest month.

[@bennerdan]

Thank you for sharing this incredible information. Any recommendation on size/strength/number of pumps for a "standard" size pool with 4 of these Enhanced Bubble Pumps setup?

[@arielvarela1621]

Hello david. Thank you very much for the excellent explanation. And I ask you a question ... what size aerator or air pump is needed for a pool of approximately 30,000 liters. It measures 2 by 11 meters. by 1.7 deep. I appreciate your information.

[@Espaglian]

very interesting and really clear explanation throught the whole construction process...thanks for your videos

[@Odinsoneye]

Hello sir. What type of air compressor are you recommending? PSI? I am putting materials together to start a large swim pond on my 30 acres here in Alabama, USA. Love this idea with the bubble pumps

[@barnabyvonrudal1]

Interesting! What are the pool walls made out of? Looks like big rocks or wood

[@mariayeva428]

What is happening with these pipes in winter time when the pool is frozen? Pipes in the planting zone are going around entire pool, aren't they?

[@jarekb4466]

Hello David, thank you for all your videos! Is there any way to calculate what pump / air flow will I need for a pond with 80 square meters of swimming area and same footage for filtration zone?

[@davidcarbon9771]

I love what you do!! Aloha from Hawaii

[@smh3839]

You are from Hawaii. Can u imagine yourself swimming in that pool? İf i were in that water i would freeze to death. Btw i m from turkey.

[@Shaunemayfield]

Your drill is plenty strong to drill through the cap, it was not because you needed a corded drill that it was stopping. Turn your chuck and it will not stall out.

[@andyspencer6308]

Yes, sounded like the clutch was engaging due to being on a numbered driver setting rather than on the drill bit.

[@petebike]

You are a great person. Thanks for sharing this info. I wonder about considerations for scaling down.

[@jessewoodward5056]

Your latest video about the organic filter was really interesting.

[@permaculturekernow1424]

I'm in the process of planning to construct one of your Organic swimming pools on southern Portugal, I have your book and watched your film. My question is around considering the hot climate there, would this method also help to reduce the heat exchange of the Regeneration and swimming zones? We are obviously already making the pool deeper and without insulation, if you have any other recommendations to reduce the heating of water, that would be great.

[@TheMoonDejesus]

Could you make a video on just the basics of the way pumps work in general for someone that has no experience or understanding of pumps. I see that the bog area of your poolsHas piping all the way around it is that taking water from the pool and putting it into the planted zone or from the planted zone into the pool? Breaking all that down for someone that is kind of dumb about these things would be really helpful.

[@738rh]

It's taking from both as water mixes and displaces to prevent an inversion, so eventually all the water mixes

[@tine6857]

@@738rh I am struggling too with designing the pump installation water flow and filtering. Impossible to find well explained videos and drawings without falling into websites that want to sell you complicated systems.

[@738rh]

@@tine6857 is actually quite easy,, an each design is different, size, shape, aesthetics etc

[@tine6857]

@@738rh for you it is but for people that want to built their own pool without experience ir is a challenge just to design a basic system that works to circulate the water and inject air in the right places

[@pavelrusev716]

Hello I have seen similar concepts for Aquaponic systems. But this concept was a pleasant surprise. But I still wonder about 1 problem in particular. What about the mosquito population around thous systems? Is the water flow strong enough to prevent a massive increase or are there other solutions?

[@dianalopez-by2ql]

Lol "...I really wish there was some other way to do this...Never has DIY been so hard..." love the info on the pump though super helpful thank you for your sacrifice!💀😂👍

[@JoesCaribbeanVanLife]

Im glad you found something to do, after the Ghostbusters closed shop.

[@LadyElsena]

I am planning a natural pool for my backyard but am planning to keep the water temperature between 70 and 85 degrees Fahrenheit (21-30 celsius) year round, so much warmer tropical pond. To keep algae growth down would these enhanced bubble pumps be enough or should I incorporate a deeper, larger filter bed? Or both?

[@ryantait177]

Hi David. How can I get the intake for my airlift to suck the solids from the bottom of my 2m deep pond that slopes down? and pump them into my filter system. Thank you

[@christurner3857]

Hi David, If the filtered water is being reintroduced at, almost, surface level around the perimeter of the swimming zone and being drawn back into the regeneration zone, how does the water at the deepest part of 2-3m in the swimming zone get circulated? I need a deep pool of say 3m to cope with the heat in Thailand, and am concerned the deepest volume of water will not be getting circulated and filtered.

[@738rh]

David uses this example for people with limited space and pump power, so in your situation you would play with pipe diameter, pump liters per minute (at your depth) and amount of air stones, but you would not need to encase a pipe within another pipe, just have your pipe close to the bottom of the pool

[@christurner3857]

Homestead Living SA Thanks. I'll try some different variations to see what works best.

[@738rh]

@@christurner3857 the deeper you go, the thicker pipe will give you more flow, stay with a minimum of 60L/min per stone. Pvc is so cheap so decide on what you want, flow, pressure or effect

[@christurner3857]

Homestead Living SA Many thanks. I appreciate the advice.

[@andypag1071]

What power rating compressor are you using? How many per volume of pool?

[@cameronward9443]

I understand the aeration stone moves the water which then pulls in more water, but wouldn't a pump be a better idea for moving large volumes of water? Maybe have it cascade in a water fall for aeration? I'm a complete beginner.

[@richardcastro4431]

I believe he does this so it’s less invasive to the “life” in the pool and because it consumes less energy

[@jasperemmer2774]

I like your system a lot and your films ;) are hugely helpful. One question though. How do plants do with all this oxygen? Don’t they live of Carbon dioxide?

[@MrJhchrist]

Plants use CO2, sure. But they get CO2 from air. Obviously aiir doesn't hurt plants. Ever heard of a forest dying from all the oxygen it produces?

[@peterhook1361]

Thanks for another informative video. Do all airstones need to be at the same depth? If one is much deeper (+1m) than the others on the same air circuit will any air go to it or will it mostly exit the shallower air stones that offer less resistance?

[@738rh]

Hi David. What is more effective, the outlet submerged and bubbling to surface or an elbow just above surface, pushing water away?

[@emmawhitchurch-ivy1275]

I am wondering about calculating the flow rate of the water leaving the planted zone. I've watched all your videos, including where you explained how different sized pipe will result in different flow rates, but that didn't address the flow rate of the water passing thru the planted zone.

[@738rh]

It does not matter as your pipes are always submerged so what leaves the air pipes, gets balanced through the regeneration zone, just displacement of water

[@zeljkobanovic4398]

Well, not entirely true. My experiments with submerged pump showed a negative pressure appearing at the bottom of the regeneration zone and reducing the momentum of water - flow rate. I wonder. How does that affect the bubble pump ? Emma made a really good question here.

[@michelschannel6816]

Is this the same principle as a protein skimmer I like the idea for my pond great explanation and video

[@tondenockay1296]

Hi would it be cheaper to do this or to run more pumps, for the electric bill each month?

[@artypoodle1874]

Thank you so much! I've been looking for a video like this for my future swimming pond 🙏

[@FFTuk]

Hey everyone, I have made several air pumps using David’s design and dropping the air stone down the middle. This is so simple that I have just knocked these together. But has anyone compared the flow rate of this with the Czech design or the ones where they run the air external to the large outer pipe then attach a collar and drill small holes in the inner pipe. That would be a great video as there seems to be a lot of guess work in this.

[@darkdeepfire]

It could be also interesting to see the difference between just regular 75mm PP pipe flow and the same 75mm inside of 110mm pipe flow.

[@FFTuk]

@@darkdeepfire do you mean just putting an air stone down a 75mm pipe on its own? The bigger pipe just acts like a mini reservoir bringing water from another tank or area of the pond.

[@NaughtyGoatFarm]

Great videos. Just a quick question. Do you find you get a build up of solids in the bottom of the tube? I would have thought that as the water changes direction that the solids would drop out of suspension.

[@Cyara248]

Do they also effectively increase oxygen in the water would you say?

[@saifss7831]

This pool can build in Uae ? Like 50 degree summer ? Need advise

[@youngkevinsmith]

At 2.44 if the air pump is the same with diff depths would the water flow be the same?

[@ninadvelankar9215]

Hi David, Isn`t it a problem, if we have more oxygen in the water which will eventualy reduce the CO2 concentration and can influence the plant growth? Have you come across such situations?

[@mateovicuna7640]

hi! i'm not an expert on natural pools, as i'm just starting to design one. But i have a marine sciences degree, and as far as i know, the kinds of plants that are used in these pools get the CO2 from the air, so the gas ccomposition from the water is not really important. although, it is important for the algae, but the water in the pool will most likely remain in balance with the air, so as long as the air has CO2 in it, your plants and algaes will be fine.

[@harrisonfamily2148]

Really good, thank you. I am going to try this on my newly repaired pond (which hopefully will then be viable for swimming).

[@zeljkobanovic4398]

did it worked ? I am a bit suspicious. Huge waterflow is needed.

[@debnelson8127]

Is it possible to have too much air in the system? Let’s say two so there is redundancy in case of one systems failure while you’re away?

[@elaleph5512]

Sr David: Tank you for share You experiments in situ ! ! Please You can put spanish subtitles for KZbin. Gracias Profesor.

[@Boscovius]

What is the advantage to using compressed air? Using water pumps will move the water much more efficiently. A series of shallow waterfalls at the surface will aerate the water just was well, one might think.

[@brentpal]

I think cost and maintenance? Thats what ive been gathering. u dont have to worry about sand or debris getting stuck in the air stones like you do with pumps moving the water not to mention if u have really hard water like we do here it builds up calcium in pumps.

[@Boscovius]

@@brentpal Good points! During the month since I posted that question I've had a chance to research more and I find that air can lift a column of water significantly well to do a modest waterfall. Considering the aeration already being performed in the water column, it does seem a good way to go. Only downside I see is compressor noise. A submerged pump is silent. I guess if you have the luxury of locating the compressor adjacent to a central A/C unit, very little is compromised.

[@Boscovius]

Water pumps will destroy the small water flora in the pool that are integral to the self cleaning ecosystem.

[@bojinovm]

Hello, what if I lower the position of the intake ? That should not change the amount of flow right ?

[@russell7489]

You're awesome Thanks for info esp organic lily growing

[@velianlodestone1249]

Question, does it make sense to place the bubble pump further away from the planted zone? I'm thinking it may function in the current design as a divider that causes a rotation in the swimming zone, preventing a chunk of the swimming zone to never make it to the planted zone.

[@volodx]

U dont have to worry about that. Is the same sistem in aquariums and u dont have problems

[@abbycarey8039]

Is this a filter or do you still need a separate filter?

[@jablewit]

Hey David, could you please show us a comparison of the flow rate between the 1m and 2m depths? I'd like to see it with the full 2m of pipe. Great video as always!

[@sergvlasov6776]

And additionally it interesting how the flow rate depends on size of bubles.

[@nullflameboy657]

ya blew it the more bubbles are in the tube at any one time before it reaches the surface, the bigger the volume of water is able to be displaced, placing the waterstone lover down increases the time that the airstone has to produce bubbles before the first bubbles reach the surface, increasing the number of bubbles in the tube at any given time, increasing the water displacement and flow rate

[@usmankhanb4u]

you will need to find the best most efficient combination of depth and pressure your self , as depth will decrease the pressure of air too , so its not that increasing depth will always give u more flow but at some point the efficiency will begin to decrease , there u need to install it depending on ur air pump power. but im not sure if it applies same for the chambered version .

[@manuelalejandro8972]

really nice idea, the like the hole concept of the natural swimming pond. On a different note, this video shows that teaching is a calling not something anyone can or should do, you may know your stuff inside out, backwards and forwards but if you can't teach it, get someone else to do it for you. . . . but nice video anyways ;P

[@jamilmo2070]

Pretty straightforward

[@robthebuilder9720]

Thanks for your videos I just need to know what pipe to put inside the plated zone and if EPDM is the best choice for the liner. I live in Lakeland FL thanks

[@KAYAPOGAN]

Great! Tnx a million 4sharing yr valuable knowledge. @:)

[@TristanMorrow]

Sediment trap?

[@nullflameboy657]

Tristan Morrow not quite, the holes that the water flows through are way too big for sediment to be caught in

[@TristanMorrow]

@@nullflameboy657 I'm looking specifically at the sealed bottom of the 4" pipe before the airstone...

[@pukavita]

@@TristanMorrow Good point! You will need a removable bottom cap to clean the sediments as part of your periodic maintenance. It shouldn't be difficult to implement and to service.

[@chrisbingham3289]

Just set up my airlift system how long does it take before the pond becomes clear ?

[@dadejazzba402]

Well?

[@chrisbingham3289]

Still waiting.

[@dcottonsecret]

Brilliant !

[@Simplebutgreat2]

Thanks very much for charing your knowledge!!! Have a nice day! :)

[@TheCfs1989]

what the costs? for a nice pool?

[@thenaturalswimmingpondco.1883]

What are the extra 2 holes for. Could I just use a tee

[@dadejazzba402]

They were not thru holes

[@Boscovius]

Trying to finalize plans for a pool. Air lift pump has me thinking. Why not have a pipe plumbed into the deepest part of the pool. Have the water column dump out into a container in the regeneration zone that is just inches above the waterline. Large diameter flexible non-perforated drainage lines run from the sides or bottom of this container and feed a network of perforated drainage pipe at the bottom of the gravel bed. In this way, detritus is brought up from the bottom of the pool where it can be filtered in the container, and gravity will cause the water to flow through the tubes to the bottom of the gravel bed. The water then percolates back up through the filter bed, and the process begins again.

[@ienpassi]

you are amassing

[@krakenfelt1]

where can i get one of your fantastic jumpsuits? :)

[@nandodando9695]

My research into air rings in water says that you mainly need to release the air 9ft down. I always imagine incorporating this into one of your pools so that rings left the top of the pipes. That requires 2.7m depth however. Do these things require planning permission?

[@graphite2786]

Depends on local council regs on their definition of a swimming pool vs fishpond/ornamental water feature. My friend was given a whole stack of regulations when she enquired about installing a chlorinated swimming pool however to install a fishpond the only regs were distances from property boundaries and easements. She is going to use this loophole to make an organic swimming pool. She has categorised it to local laws as a lily pond/water feature..( there are no laws stating you can't swim in your water feature)

[@GabrielAKAFinn]

@@graphite2786 Jesus christ, you can't even make a fucking swimming pool without your nanny government looking over your shoulder

[@fadret]

Excited to build a pond in the next couple years. could you please list some examples of good air lift pumps that would work for this application? Thanks from West coast of Canada. Appreciate your videos!

[@738rh]

I would recommend Jebao, best efficiency and very reliable

[@mynoks]

How can I contact you? I am interested in your knowledge and expertise as I am planning on building an organic pool close to Barcelona (Catalonia) .... can you reach me? please. Thanks!

[@pilkyish]

Very informative as usual, lacking the scantly clad beautiful lady we’ve become accustomed to though😁

[@bobb.6393]

2 ft deep pond omg what to do?

[@s-c..]

2 metres

[@dj234543254]

Stick with the original pipe but just go down before you go up. U shape with only one leg containing the air bubbles pulling the water out. This should be less complex and maintain the same flow expected from the pipe diameter and depth.

[@elaleph5512]

Tank You for even share ! Rulz

[@janadelbosque3139]

Me interesa mucho la información que entrega pero me gustaría que pudieran instalar subtitulos porfavor soy de chile

[@thebushnells]

NEED ADVISE ON SIZE OF AIR PUMP.... We've excavated our natural pool and ready to put the liner in next week..... JUST DON'T KNOW WHAT SIZE AIR PUMP TO GET I only need 4 air bubblers. Size of pool: Lap pool section 1.5m wide x 9m long x 1.5 deep/ shallow section filtration zone 5m wide x 9m long x 700mm deep Can someone please help me out? Many many thanks, cheers

[@immortalayarna]

looks like nobody is willing to share the answer to this one,believe me i hve looked 🤣🤣🤣🤣🤣🤣🤣

[@thebushnells]

@@immortalayarna I Just built a massive 63,000 litre natural pool.. Using a Resun LP-100 (140 lpm) Septic Air Pump... Works amazing water insanely clear 3 airstones & 3 air lift pumps

[@immortalayarna]

@@thebushnells Amazing,Thanx alot Nick extremely helpful info, i hope u might hve both the time and chance to show your pool setup on youtube. but please clarify, you used 3 airlift pumps(140 lpm capacity) with a single air stone connected to each for your 63,000 litre pool ,right?

[@738rh]

@@immortalayarna at 1.5m deep, 75 or 110mm will be perfect with each air stone doing about 60L/min so x 3, so a 200 will work perfectly

[@immortalayarna]

@@738rh thanks alot, I really appreciate the info

[@benperry1464]

Na mate the air pump works buy displacing water out to the pipe making the water in the pipe weigh less than the water out of the pipe the water out of the pipe enters the pipe because of this and pushes the l8ghter airated water out the top what you are doing will make the pump work harder for every liter of water it pumps in this may go un noticed if you have a strong air pump that you weren't pushing to its full abilities in the firstplace( and not running itat its best ability) but if youare already running thepumpat its best ability you wont get much gains because of the increased pressure uneed to push itdown theincreased distance You can get thesame effect buy jus keeping the air stone at the same depth and just spiraling the pipe to the surface the air will displace the same increased amount of water without working the pump harder What youcan do

[@archeryman62]

Cutting PVC pipe, put your drill in REVERSE first, makes life easier

[@mersonkv3765]

U r suuuuper

[@sreed16]

~25 mm / inch. 68 mm ~ 2.75 inches.

[@VMKinnovations]

One suggestion...do not cap the bottom of the 4" pipe so you circulate the stagnant deep water water plus oxygenate it (an algae killer). Great work though!!!! thanks.

[@usmankhanb4u]

if im not wrong , the cap keeps pressure off the chamber inorder for pump to work at its optimum .so the pump is only baring the pressure of T height as thats where water is coming in from

[@bobjames9618]

Fish?

[@WhatIsMisophonia]

Interesting... I guess... Is it really so hard for everybody to stop just winging all of their videos? I still don't really understand your method or why it works.

[@patriciocariagabermejo5091]

David burbujas

[@TheReepe]

*describing pipe* meanwhile microplastic being distributed by wind in the garden

[@branislavboba1699]

Wait a minute! You made a quite a lot of fuss about how wonderfully gentle the original pumps were and now suddenly they're not strong enough? So where's the truth? There's not much help in the inventor being confused himself.

[@alynneflanery9918]

like the more masculine look....

[@serhioromano]

David, I've always valued your videos but you need to move forward with that one. This is not effective way of either aeration neither filtration through circulation. I think the best way now is "microbubble" or even "nanobubble". With a low watt you can heavely oxyginate water, and also create a very nice streap for cyrculation. That aproach might be much more effective.

[@zazugee]

isnt this the problem of the type of airstone and airpump used and not the system?