How to make high-quality hand thread tap(don't forget the like)

Broken and disposable tools are always usable and functional and will only require a little innovation and creativity
The best way to make hand thread tap: • The best way to make h...
How to make a handmade drill bit: • How to make a handmade...

[@howder1951]

Great build and very innovative use of a drill bit with spiral flutes. There have been a lot of makers with straight flutes, but I like the spiral, and old bits are fairly easy to come by. Thanks and cheers! Someone should forward this vid to homemade tools.

[@Mastermind-]

I'm so glad you enjoyed it my friend🙏👍💐

[@user-fd3dy3hw6o]

Делал я со сверла только с конуса на М12шаг 1,75 левый , отлично получилось .

[@user-mw5iu4iz6q]

Красавчик ! Чистюля !! Приятно , когда все почти идеально !!! Успехов ❤ , за наждачку и образив минус😢

[@HorstJarnuszak]

Absolute HOCHACHTUNG! Das war der Beweis, daß es noch echte Handwerker gibt! 🎉

[@Mastermind-]

🙏🙏🙏💐

[@henmich]

This video really makes me appreciate just being able to buy one.

[@Mastermind-]

🙏🙏💐❤️

[@zygmuntszulowski4197]

Witaj Fachmanie młody i najwyższy Szacunek od starego zawodowca, super robota!

[@Mastermind-]

Dziękuję bardzo mój dobry przyjacielu🙏🙏💐

[@cryon7260]

Very well done. I keep in mind your way to sharpen a tap drill.

[@Mastermind-]

Yes, thanks👍

[@user-bl6it8ls6c]

With no doubt, the very best tap. I know because I made some myself in desperation, on weekends where I need it one and every shop were shut, but the cheapest tap would do the job in good hands.

[@Mastermind-]

Thank you so much my dear friend🙏🙏🙏💐

[@ZygmuntKiliszewski]

A handmade tool is always a reason to be proud. Congratulations and best regards 😀.

[@racing_mntage1584]

Exactly, I feel proud everytime I use things that I made or restored

[@Mastermind-]

Thank you very much my friend I hope other friends like you will understand the value of this work and not be superficial

[@Mastermind-]

🙏🙏❤️👍

[@ZygmuntKiliszewski]

Thank you for the like 😀.

[@garthdaddy7438]

You should note that drill diameter are actually slightly smaller than stated size and tap diameters are slightly larger, so take care for a screw to fit the tapped hole!

[@Xynudu]

Good video. I will try this method some time. Cheers Rob

[@Mastermind-]

I am very happy my good friend cheers

[@aubrymacielpereirafilho3017]

Pensa num cara treinado! Belo trabalho! Valeu muito obrigado!!!

[@Mastermind-]

Muito obrigado meu bom amigo🙏

[@JesseCase]

Damn fine work! That was some quality stuff. It's also nice to see someone that actually does things correctly and properly when it comes to machining and metal working. Nowadays I see so many people on the interweb KZbins that cut corners, force things, and sometimes simply just don't know what they are doing. Then they make videos and pass those bad habits on to others 😢. I also appreciate that you know how to correctly grind your own lathe bits which is something that all machinist should at least know how to do whether they use indexable bits or not. That is definitely a dying art. You are quite impressive my good sir, keep up the good work! 👍👏😊

[@Mastermind-]

Thank you very much, my good friend, and I will try to offer the best as much as I can🙏🙏💐💐

[@samhiscox3511]

@@Mastermind- good stuff Maynard

[@Matthews_Tools]

Great job my friend! You left out only one thing, tempering. it is very important that the tool is not brittle, because one wrong move can break the teeth. in the case of tool steels, they undergo multi-step hardening, which makes the material very resistant. great job by the way!

[@Mastermind-]

Thanks for the watching and the tips my dear friend🙏🙏💐💐

[@ALittleBitOfEverything-wd9ee]

For tempering steel that needs to stay very hard, like for a tap, sometimes just boiling water is hot enough, and if that leaves it to brittle, an oven at 150 degrees C might work

[@enricodelre284]

Gran Bel Lavoro da professionista e con stile. Complimenti sei Bravissimo.

[@Mastermind-]

Grazie mille mio buon amico🙏🙏🙏

[@lulubining5208]

Bonjour,quel beau travail. Très bien filmé. Mes respects 👍👍👍😉

[@Mastermind-]

Merci mon bon ami et je suis si heureux que cela ait été agréable pour toi🙏🙏🙏💐

[@mrsnazgol5314]

Hello, have a good time, don't be tired, thank you for your good video, it was very good

[@Mastermind-]

Thank you! You too! سپاسگزارم سانازگل

[@homemadetools]

Good work. We shared this video on our homemade tools forum this week 😎

[@Mastermind-]

Wow, thanks🙏🙏💐💐

[@invencoesecriacoescaseira]

Excelente trabalho e muito conhecimento parabéns

[@Mastermind-]

obrigado meu amigo🙏👍💐

[@mauriziograndi1750]

Superb skills and hat off to someone’s that really deserve It.

[@Mastermind-]

Thanks my dear friend

[@tommec]

Bardzo dobra robota!!!

[@Mastermind-]

🙏🙏🙏💐

[@NarinderSingh-bw9gv]

709

[@KrugerdlyaMoisha-ce2xg]

Слышишь лях, а в где добрая работа??? Точность + километр -километр. .а цена 1 штуки 1 скудо.

[@pekpks7347]

Magnificent work.I need to make an m20 nut. I'm going to take advantage of the idea and do it with a 22 inch drill that I have in the workshop ... ( Not inches 22 m/m diameter )

[@Mastermind-]

Go for it my friend

[@saytencushman3758]

I'm already subscribe from some previous ridiculous video I watched of yours. Love the innovations!

[@Mastermind-]

🙏👍💐

[@javiermaroto5529]

Un artista!. Si señor

[@Mastermind-]

🙏💐🙏

[@donizetesiqueira-pezinho7621]

Parabéns pelo trabalho e pela organização e limpeza durante o trabalho.

[@Mastermind-]

Obrigado, meu amigo Eu espero que você tenha gostado🙏

[@innovationtime20]

Great job 👍

[@Mastermind-]

Thanks for the visit🙏👍

[@ColiRuja-mg5zs]

Nam știut ca din burghiu poate sa facă asa ceva tarod bravo meseriasule

[@Mastermind-]

multumesc prietene

[@RebobinadoraSaoFrancisco]

Ficou muito bom!! Parabéns

[@Mastermind-]

Muito obrigado meu bom amigo

[@claudegillin8713]

Atelier propre, machines outil propre et enfin un travail effectué dans les règles de l’art. Je respecte et admire les personnes comme vous qui exécute des travaux frisant l’excellence, je remercie ceux qui vous ont transmis leur savoir et je ne doute pas une seconde que à votre tour un jour vous le transmettez à votre tour…… Cordialement

[@Mastermind-]

Merci beaucoup mon cher ami et j'apprécie votre point de vue différent et j'espère que vous avez apprécié la vidéo🙏🙏🙏

[@jadae001]

Bom trabalho que fez com a broca quebrada, parabéns

[@Mastermind-]

Obrigado meu bom amigo e fico feliz que tenha gostado

[@craigsudman4556]

Slick! Great video thumbs up.

[@Mastermind-]

Thanks for the visit

[@towaker]

super good work !!!

[@Mastermind-]

Thanks a lot!🙏🙏💐

[@robertocentonze9653]

Complimenti!!! bellissimo e perfetto lavoro👍👋 Un saluto da Roma

[@Mastermind-]

Grazie e sono molto felice e onorato che ti sia piaciuto, mio ​​buon amico🙏🙏🙏👍❤️

[@laszlohentes61]

very good job,thx!

[@Mastermind-]

Glad you liked it!🙏🙏🙏💐

[@Seteclata]

Compla ali na China, balatinho né?😂 Excellent job, congrats.👍👍

[@Mastermind-]

merci moninga na ngai👍💐

[@javiercalvo8031]

Exelente me gusto la idea grasias por compartir

[@Mastermind-]

Muchas gracias mi buen amigo y me alegro mucho que te haya gustado🙏💐

[@joaopetrusdesouza5707]

Very good idea.

[@Mastermind-]

Many many thanks🙏💐

[@andrzejporeda7281]

Super jest to pomysł pozdrawiam serdecznie 👍👍👍👍🏻

[@Mastermind-]

Dziękuję mój dobry przyjacielu i bardzo się cieszę, że Ci się podobało🙏💐

[@googleuser2607]

Genius!! The possibilites are endless!

[@Mastermind-]

🙏🙏🙏👍🌹

[@elisancere3578]

Great job really! Only time I got was holding on to the part by hand during the drilling process. 🎉

[@elisancere3578]

Worried*

[@Mastermind-]

Glad it helped!👍

[@bimbim2000]

Sangat menakjubkan kawan. Hand trhead yang mantap

[@Mastermind-]

terima kasih kawan🙏🙏💐

[@philipdenner8504]

Well done that man.

[@Mastermind-]

Thanks my dear friend👍💐

[@jasonbarnes3360]

Bro i appreciate how clean you work ! Great job!

[@Mastermind-]

Thanks for watching Thank you very much and I am glad that it was enjoyable for you, my good friend

[@astridvallati4762]

Instead of the Three Jaw Chuck, you should use an ER32 Collet for better grip and concentricity.

[@assyholey4224]

buy us all one.

[@viejojorgge]

@@assyholey4224 A mí que me compre un macho como ese, ya estoy conforme...

[@user-yn2jx5qt6x]

Muito bom excelente parabéns

[@Mastermind-]

Muito obrigado meu bom amigo

[@eleddinabbasov6669]

отличный мастер молодец

[@Mastermind-]

🙏🙏💐

[@paulmacca3974]

Grand Travail, bravo 👍

[@MechanicAvenue]

Very Helpful and Informative video 👍✌️❤

[@Mastermind-]

Glad it was helpful!🙏🙏🙏👍⚘️

[@masterQ20]

Nice 👍👍🤝 Dear friend so amazing🌹☺

[@Mastermind-]

Thank you so much 👍🙏🙏💐

[@helmut3356]

19:26 why this way? Use drill machine 18:25 for perfect coaxial hole.

[@Cesarlujan55]

Buen trabajo aunque pensaba, sí, en el costo beneficio. Pero es un trabajo artesanal a costa de ingenio , paciencia y habilidad. Es una satisfacción para el que lo hace. Vaya mis felicitaciones para Master y gracias por compartir conocimientos.

[@Mastermind-]

Gracias por tu valioso comentario, mi buen amigo, y me alegra mucho que lo hayas disfrutado.🙏🙏🙏👍❤️

[@juancar2568]

muy bien para fabricar machos de roscas poco comunes parece una idea genial, para roscas comunes no merece mucho la pena acabo de compara un M11x1 por 4 euros( igual solo hace una rosca pero va a cumplir)

[@Ma_X64]

When you just have many cool machines.))))

[@Mastermind-]

And when you have great ideas and machining skills😉

[@Ma_X64]

@@Mastermind- Look at @Mehamozg. I'm shure you'll like it.

[@Mastermind-]

I saw it and just👏👏👏👏👏

[@krzysztofw3925]

Super podoba mi się

[@Mastermind-]

Dziękuję, przyjacielu🙏🙏👍💐

[@edilsonmartins6653]

Muito bom!

[@Mastermind-]

obrigado meu amigo🙏

[@taejin821]

나사 작업후에 탭 열처리 안해도 됩니까?

[@victorreppeto7050]

That is my kind of recycling!!

[@Mastermind-]

👍👍👍💐

[@quincylui95]

Sorry, not worthwhile at all. Btw, you should use grinding machine instead of lathe to make thread. HSS steel doesn't need oil as a cooling medium. Liquidifed Corbin dioxide can work.

[@andrewlensky632]

Do I understand correctly that first you release the metal (remove the quench), and then re-quench after processing? Cool work, but for those who have a welding machine or a heating furnace.

[@Mastermind-]

You almost guessed right, my friend

[@wellscody86]

Heated and left to cool to a anneal the hardened metal, then after it was quenched in oil that steals some carbon from oil for hardness but it quickly cools the steel to lock in the rearranging molecules.

[@chotuusian4127]

Good work👍

[@Mastermind-]

Thank you so much 🙏👍

[@markrainford1219]

Very nice mate.

[@Mastermind-]

Thanks for the visit

[@user-vj4fq7gq3f]

I enjoyed a lot and thanks

[@Mastermind-]

Glad you enjoyed it🙏💐

[@kiatthaitraditionalclinic9264]

Great teacher.

[@Mastermind-]

Glad you think so🙏💐

[@josephmacuha3068]

Nice work piece

[@Mastermind-]

Thank you so much🙏👍💐

[@mighi68]

Toll gemacht … !

[@Mastermind-]

Danke mein Freund🙏🙏🙏💐

[@petermcneill80]

Nice work

[@Mastermind-]

Thanks for the visit🙏🙏💐

[@user-sz8vl1ej1z]

Excelente trabajo🙏🤗

[@Mastermind-]

🙏🙏👍🙏🌹

[@mohammadhafeezkhanraja4758]

Very nice work

[@Mastermind-]

Thanks a lot🙏💐

[@renripari5514]

GOOD STUFF 👍 THANKYOU

[@Mastermind-]

Glad you enjoyed it🙏💐

[@lucianoalberto7555]

Bellissimo lavoro

[@Mastermind-]

Grazie e sono molto felice e orgoglioso di te, mio ​​buon amico

[@alessandroandrenacci2372]

Very good idea, and better job ... i only ask how much oxygen was used, and how much would be instead cost a commercial tap ... ( of course not to deal with taps that are really "hard to find" on the market ... ). Note : a test with a blind bore would be much more relevant, as spiral taps are expecially designed for that type of holes ... Thank you very much in any case for your usefull lesson, i really appreciated both the heat treatments of common drills ...

[@Mastermind-]

🙏🙏🙏💐

[@user-cd7oq7yc6n]

круто , но уж очень заморочено . 👍

[@tarekessed3036]

Great 👍👍👍

[@Mastermind-]

Thank you my friend 👍

[@James-fs4rn]

👍 brilliant!

[@Mastermind-]

Many many thanks my dear friend🙏💐

[@martolomew956]

The old way of screw cutting took skill and a sharp brain, it's scandalous how the salary of a toolmaker or machinest was so average for such a skilled job. Dying breed nowadays

[@farhankhan-dh2tu]

Nice job sir

[@Mastermind-]

So nice of you🙏🙏💐

[@robertoudokrapf453]

OLÁ. Gostei de ver. Acredito que o primeiro aquecimento foi para "temperar" a peça. A sugestão é a de um esfriamento mais lento colocando-a no mesmo recipiente porém envolta de grossa camada de "Carvão MINERAL". No final, a forma como foi feita a "CIMENTAÇÃO" é muito provável que a peça se torne 'QUEBRADIÇA". ABRAÇOS... Roberto Udo Krapf

[@Mastermind-]

Olá meu bom amigo Muito obrigado🙏🙏🙏💐

[@barryvanwyk7467]

Just a quick question. Doesnt the reheating blunt the cutting edge of the tap?

[@Mastermind-]

I don't think it has any effect, but to be sure, I resharpened the edges after reheating

[@glennschemitsch8341]

no, he is now re-heat treating the tap as he annealed it at the start of the video.

[@WayneCook306]

Nice job,👍👍👍👍👍👍👍👍

[@Mastermind-]

Many many thanks🙏💐

[@WayneCook306]

You're Welcome.@@Mastermind-

[@Armanufacturingskills]

It’s amazing

[@porcupinewspaniay5852]

Jak ja dawno nie ostrzyłem noża oprócz przecinaków do plastiku

[@jagjeetsingh8587]

Very Very good

[@Mastermind-]

Thanks🙏💐

[@manfredgroma4608]

Schöne Arbeit, aber lohnt sich der Aufwand.

[@Mastermind-]

👍👍🙏🙏

[@user-vm7ry2ld4m]

хорошо сделал.

[@silushkadebilnaya]

Спасибо. Идея которая лежит на поверхности. Можно изготовить метчик с направляющей. Его иногда так не хватает.

[@hayatsanayi1238]

Adamın dibisin kardeşim 🎉❤

[@Mastermind-]

sağ ol, kanka Umarım eğlenmişsindir

[@hayatsanayi1238]

@@Mastermind- hem eğlendim hem öğrendim eline sağlık

[@enigmaseth]

Can an Acme hand thread tap be made in the same way? Would any modifications to this protocol be needed?

[@Mastermind-]

yes it will

[@parikshitdeshpande7311]

4:03 which insert are you using for turning???

[@vdovinandrey]

Молодец! Работа на высоком уровне. Продолжайте повышать свои навыки.

[@Mastermind-]

🙏🙏💐

[@papa58857]

Резьбу бы резать более полого на конус. Метчик будет так работать успешнее.

[@KrugerdlyaMoisha-ce2xg]

Зачем заниматся целы день одним метчиком с очень низкой точностью, хуже китайских из 90х, если он стоит копейки, чисто хайпануть на восторженных дурачках, или если живёшь на северном полюсе в полной автономке.

[@jagjeetsingh8587]

Very good u are free.mind

[@Mastermind-]

🙏

[@sugarmarmelate1952]

perfect!!!

[@Mastermind-]

🙏🙏🙏💐

[@bobansupergenije7512]

Bravo vrhunski projekat

[@Mastermind-]

🙏🙏🙏💐

[@JTelecom]

Excelente trabalho

[@Mastermind-]

🙏🙏🙏👌❤️

[@latinotvsa]

La pregunta es. Quien tornio las parte del primer torno creado ???

[@Mastermind-]

No te pillo

[@latinotvsa]

@@Mastermind- ósea quien hizo tornio las partes del primer tornó creado. Si no existia un torno

[@HayatHayat-yj8qn]

Bravo Bravo Türkiye İzmir selamlar ve abonelik 🎉

[@Mastermind-]

Merhaba değerli arkadaşım Eğlendiğine çok sevindim🙏💐

[@hamidrezakhanban7944]

کار جالبی بود👌👌

[@Mastermind-]

سپاسگزارم دوست خوبم و خیلی خوشحالم که لذت بردی🙏💐

[@muhammadabrorrmaulana530]

Kamfettt tenan rika

[@user-wv5ky5bm3s]

Красавчик

[@ClarenceHanselman-tm2zj]

Love it

[@Mastermind-]

🙏🙏🙏💐

[@QuangNguyen-up2xo]

Mũi tê rô... mới tê rô 1 lần cùn răng rồi ak

[@munawarkamal2640]

Good oye Good

[@Mastermind-]

Thank you so much my dear friend 🙏💐

[@Bob_Adkins]

Most TiN-coated drills are not real M2 or M3 HSS, so your tap is probably alloy. HSS is air-hardening, so it's very difficult to anneal.

[@rameezsheikh7576]

HSS or Cast iron can be easily (not- really) Annealed by Submerging it into Limestone powder just after Reaching Red hot temp.

[@VINOGRA]

Для HSS требуется температура закалки 1250 Цельсия. Это невозможно обеспечить газовой горелкой. Твердость будет маленькая.

[@glennschemitsch8341]

This cannot be a cheap drill to start with,as some are just coated to make them look expensive.

[@kieranh2005]

@@VINOGRA that is oxygen-acetylene torch which is up to 3200°C.

[@arthurhuskins910]

@@kieranh2005 yes can reach those temps but this one was bearly turned on (still hot but not that hot)

[@arnelamoguis9323]

Good Job

[@Mastermind-]

🙏🙏🙏💐