If you're looking for mods I would start here steamcommunity.com/sharedfiles/filedetails/?id=2700078224
@thomgizziz3 ай бұрын
Holy crap do you not know what translucent means? Slow people like you have started to change the meaning of the word and you need to stop. We don't need to make a new word or start having to say partially transparent when we already have translucent that means that.
@smcfadden1992Ай бұрын
I built my entire interior with 3d shapes, I made a fountain soda with a bendy straw even has the red stripe on the straw, I made nos tanks and a fuel cell too
@googolplexfpv Жыл бұрын
Someone already mentioned the free cam, but if you press F it'll focus the camera on the selected part instead of the car itself. Very useful for those small details inside and out of the car.
@Fallen_Chimera6 ай бұрын
If you're on Steam Deck, you can press Y to focus the camera on a specific part too, interesting
@itz-Ender3 ай бұрын
THANK YOU! I was so lost on how to move the camera around
@xX_Gravity_Xx9 ай бұрын
I wish we'd get a node-morph system. Where there's a predefined interior with the ability to add and adjust nodes to shape things, and then we could add fixtures on top. But, I'd even settle for bodies that had blank interiors. Where the floor, pillars, walls etc. were very shallowly filled in as blank. That way we could achieve a hogher quality without spending 80 years moving a scaling bits.
@revanx73 Жыл бұрын
If I'm not mistaken, you can change the position of the firewall and the size of the center tunnel in advanced settings.
@dictatorofsalt59028 ай бұрын
Correct
@TheFinePlayer Жыл бұрын
Two words: Free Cam For me, using the "free cam" mode where your camera angle isn't bound to an anchor point, makes things sooo much easier to get right. Instead of having to change the camera anchor point and dealing with awkward positions. So for interior stuff I'm in free cam mode 90% of the time. Especially when aligning things to be pixel perfect.
@fattyMcGee97 Жыл бұрын
Press Shift+C for the free cam mode. You can really, really get in there and do the nitty gritty details. Love this game and o would've appreciated a video like this when I was starting out. Glad to see you do it!
@zkybixd11 ай бұрын
I dont know why but it never crossed my mind that you could change the function of a lamp, so now i can use headlights as taillights and it wont dumb in beamng :D
@SRTMusic7774 ай бұрын
kinda helped but not to much. i can be stupid and didint notice but i think you didint say to turn on the movement mode, not the scaling mode for the fixtures to actually get them there
@xenoyparxi Жыл бұрын
One more tip is to put a crash dummy mod inside, because... well, I don't think the dummy will be pleased with this legroom lol
@jasonlafond325 Жыл бұрын
so long overdue.
@automotiveflux Жыл бұрын
Better late than never, I do intend to make a few more of these
@jasonlafond325 Жыл бұрын
@@automotivefluxthanks so much because i’ve been trying to learn how to for a couple years now and whatever i’ve made has been pretty dismal
@ThatoneCarSpotter2 ай бұрын
@@automotivefluxWhen I export to beam Ng and I try frost person it doesn't go to were my seat is so can u help me fix it
@xenoyparxi Жыл бұрын
14:45 you can fill the whole fixture via the paintbucket button on the top right from the slots there
@TJWCars Жыл бұрын
This was great and much needed. May I ask if we could get one of these videos focusing on even more detail like the floor and stuff?
@TheLightLOD Жыл бұрын
For things like dashboards, seats and other interior components its usually a good idea to try and position them on a car in a way where they are oriented correctly in the 2D mode. With the dashboard that might be stuck on the back of the car. When the part is placed like that all you need to do after switching to 3D mode is move it, you no longer need to rotate it in all kinds of ways (though you might still want to change the angle a bit later). I at least find that a bit easier than putting the dashboard in backwards and then having to hope mirroring and rotation help out.
@0xymfzzty0 Жыл бұрын
Yes I’ve been waiting for this, I never touch the interior
@paulesthete464811 ай бұрын
JFC this is still incredibly counter intuitive. Like everything else is easy and pleasant to do but this is straight up throw-computer-out-the-window type stuff. Like moving one image in Microsoft word. Crazy. Hope they finally implement some actual interior editor in the future.
@LiLOlix2 ай бұрын
thanks man! you really helped me
@pencilcase8068 Жыл бұрын
Bro you don't know how much I needed this. Also how do you make good exteriors, the only good things about my car are the quality spam engine, suspension, brakes and aero
@averyso6669 Жыл бұрын
I actually just attempted my first interior last week. Turned out ok, was going for an e39 540i bmw competitor since mine is currently broken and bmw parts are expensive. Definitely need some more practice to get close to this
@robbiemer8178 Жыл бұрын
Nicely done! You can also use the parts list panel on the left side of the screen to select specific parts. And, I tend to leave the snap to angle on and set to 30 degrees so that I can control the initial placement and rotation a bit better. If I need to I then untick the snap to angle for finer movements.
@carltonleboss Жыл бұрын
Very nice tutorial.
@season22727 ай бұрын
i would recroment to make textures yourself in the General Textures tab for example Glass and different Leather textures or a Mesh Texture because the standart ones are looking bad, you can make the Mesh smaller
@season22727 ай бұрын
it exist a Prototype pod mod which is really well made you can move the Pod insid without even activating the 3D fixture mode and you can change the size to match the Chassis i havelike 200 hours in Automation and im still Learning and with the newest version the Lights are a bit brocken( the Metal fixture from any fixture from the HeadLights, Taillights and indicator section has the Light Effect at standard)
@SiphesihleSimamane-n6p9 күн бұрын
How do you get the dash in the car
@pablocosso41215 ай бұрын
This would be a perfect "make a car game", if the process of interior creation wasnt this kind of bad, its completly useful, and i dont find the words in english to say "NEFASTO" or "Es una mierda"
@superlavahair15363 ай бұрын
what does nefasto and es una mierda mean
@saints_row_cat3 ай бұрын
Disastrous and is shit
@season22727 ай бұрын
i would Recroment when you make a carbase and then different models you should make the slowest one first (or the car with the least ammount of fixtures) because you can make yous a base and then make upgrades time after time and you can easiliy upgrade the engine or other stuff
@BayAreaMike9910 ай бұрын
19:22 this is something I would do😂😂😂😂
@Duvstep910 Жыл бұрын
could you do a short tuning tutorial next?
@automotiveflux Жыл бұрын
I'm not amazing at tuning but I can try
@hardstick9410 Жыл бұрын
the interior detail is kinda fun do a matt and a cover in door is a pain the ass
@Александр911-х6л8 ай бұрын
true.
@ferrarifast14296 сағат бұрын
They REALLY need to add a more intuitive interior editor. I'm sure making an option to noclip the body to place interior parts can't be too hard to code 🥴
@iz-joako39733 ай бұрын
Does anyone know how to make the steering move in beam ng?
@superlavahair15363 ай бұрын
uh ~prop:the fixture number,steering,0,1,0,0,0,0,min rotate (i do -900),max rotate (i do 900),0,multiplier (if you do 1 then it does everything the exact way but if u do 1.5 i think it multiplies so just do 1)~
@superlavahair15363 ай бұрын
if you did use my reply to help witht the steering can you at least thank me
@imaremi3513 ай бұрын
@@superlavahair1536 -_-
@ac_jayyy10 ай бұрын
picked this up real quick thx so much!!
@NatSixFour Жыл бұрын
Good stuff I can see this helping people out.
@sean_w8272Ай бұрын
When I export my car into Beamng, the steering wheel and shifter don't work (they don't move), why does this happen and how can I change it?
@automotivefluxАй бұрын
I believe there is special scripting required to make them work, check out fillman86 I believe he's shown how it's done
@switchlitedontaskКүн бұрын
Same. But which video is it?
@sean_w827220 сағат бұрын
@@switchlitedontask Butch13gaming has a video on it about beamng props
@natthaphonnoble24076 ай бұрын
I need to find the mods for all those parts,I only have the basics parts
@elios7623 Жыл бұрын
flexing the burnout tribute car 10/10
@Fromate2 ай бұрын
Can anyone teach me how to copy and paste?
@cold-frontin_penguin79026 ай бұрын
Where do u get mods, I'm new to the game
@vammy_6 ай бұрын
steam workshop
@DiosXly Жыл бұрын
waiting for the formula drift car build❤❤
@gummypanda789723 күн бұрын
Plastic lawn chair👍
@Srki12Ай бұрын
My 3d things dont want to get to interior
@FakeSmilelambo6 ай бұрын
shift-c is free camera
@NovumSB6 ай бұрын
pretty sure you can hide the chassis
@xrvd6 ай бұрын
holy yap
@Ang3lUki Жыл бұрын
I'd love to get more advanced interiors but your discord is super toxic :/
@Mohammedamine08-p9k7 ай бұрын
But i have craked automation
@Ivnfoil6 ай бұрын
You don't really need mods to do it
@superlavahair15363 ай бұрын
@@Ivnfoil yea but if you need more customization (ie if you want a specific seat for your car and a infotainment system thingy then you need a mod)
@Ivnfoil3 ай бұрын
@@superlavahair1536 i found out on how to get a mod
@Ivnfoil3 ай бұрын
@@superlavahair1536 i found out how to get mods,
@Ivnfoil3 ай бұрын
@@superlavahair1536 update: made 2 models using interiors currently working on it