How to make Jens Johansson Lead Polysix synth sound tutorial tips Roland FANTOM イェンスヨハンソン シンセリード

[@Manuelschajris]

Wuauuuuuu thanks Man! Waiting many year for this Lead.

[@kerederoom78]

You’re welcome!

[@Ereungafa]

I fucking love you man! I can finally sleep correctly after all those lead sculptin failures thorugh the years...

[@kerederoom78]

Thank you so much! I'm so glad I could be of service to you!

[@wolfmoon9540]

thank you so much for teaching us these secrets ! forever grateful

[@kerederoom78]

You’re welcome!

[@Malmsteen1990]

I think is imposible to replicate the exact tone, but this one sounds really good!

[@kerederoom78]

Thank you! His tone has always fascinated me. So I find value in pursuing that tone.

[@D4RKZ1N-BLU3]

@@kerederoom78 yep, its like an official metal tone. Loool

[@georgebarabas]

Fantastic! His sounds were different on Episode, Visions, Destiny and Infinite albums as well. Probably, the leads on Destiny are the best to me. But of course, I'm a fan all of his lead sounds.

[@kerederoom78]

Thank you so much! You know a lot about Jens Lead history! By 1997, he was using PME40X as a distortion pedal. And he replaced it with JD10 from 1998. I think he may have used the Polysix & JD-10 on the Destiny recordings.

[@krystiankowalski6875]

Great man! I’m impressed with your knowledge! Have you thought about the similar building tips for Korg keyboards? :)

[@kerederoom78]

Thank you! OK, I'll be making a tutorial video on creating Jens lead with KORG KRONOS(Polysix sound engine) next time.

[@temocjosh6131]

I have the JV 1080, I'll use this as a starting point :) Thank you very much!!

[@kerederoom78]

Thanks ,too! Keep up good work!

[@nobuakifujimura6812]

アタック感やレバーの歪み加減が素晴らしい！勉強になります。 JD-10を通すと艶があって良いですね。

[@kerederoom78]

ありがとうございます！JD10の歪みは低音から高音までバランスが良いのと、アンプシミュレータの効きが独特で個性的ですよね！

[@jaimearaya1781]

My friend, how to connect the distortion pedal to the Fantom and then to the sound system?

[@TheMetalwarrior45]

Hey Man !! Amazing tutorial !! Amazing playing too ! I was wondering if you planned to make a tutorial on Serum or Massive or any other VST to achieve this type of lead sound ! It will be great thaks again !!

[@kerederoom78]

Thank you very much! I don't have any plans to make a Jens Lead with those soft synths at the moment, but I will try if I feel like it.

[@bigbutler87]

Can you please make one for NI massive!? I've been searching for ever for jens style lead patch to use with my metal songs! I'd even go as far as to pay for a preset :)

[@guillaumeduchesne9758]

It sounds absolutely fantastic! great job. It sounds like you are using the spkr simulator on the jd10. Am I guessing right?

[@kerederoom78]

Thanks a lot! Yes, that’s right. I did use the JD10 speaker simulator. I also tried the sound with the speaker simulator off, but I like it better with it on.

[@guillaumeduchesne9758]

@@kerederoom78 just discovered your channel today. Love it. Keep up the great content. Cheers from Canada

[@connorpearce4196]

What is a alternative to the sine wave since my synth does not do pulse width modulation? As well what how are you producing the feedback like sound?

[@kerederoom78]

I think it would be possible to use a clean organ waveform instead of a sine wave. For the feedback sound, I used an octave lower sound source linked to the modulation, and I used LFO.

[@angelvelazquez633]

im trying to do this on zenology, how can i add the fx part?

[@AncestorGabo]

Excellent video!!! Would you happen to know how to achieve a similar sound in a JV-1080? I’m trying to follow your instructions but the values are different. Any input is greatly appreciated! Keep up the great work!

[@kerederoom78]

Thank you so much! Yes, after 20 years of research, I have figured out how to make a Jens lead with JV1080,but I can't show it to the public for some reasons, sorry. In this video I have tried to create a tone that is as close as possible to a real Jens lead. For a hint about the most important element, the oscillator, I suggest you refer to a clean organ sound. As for the second most important aspect, the distortion effect, it is still difficult for me to reproduce the characteristics of the Morley JD10.So you can get real JD10 on eBay.

[@AncestorGabo]

@@kerederoom78 Thank you for your prompt reply! I already own a JD-10, so that part is covered. Since i already will give the distortion effect externally with the morley, should i assign phaser as the main effect for the patch? Also, how would i be able to make the screech sound in JV1080? Thanks again for the amazing work, you should definetely make a video on the lead sculpting in the JV1080, even if it is from patreon or something like that :D

[@kerederoom78]

@@AncestorGabo You’re welcome! In this video I used the phaser built-in effector, but that's not necessarily necessary, because a slight detuning of the two oscillators will give you the full swell effect typical of Jens lead. I have already sold my JV1080 and have an INTEGRA-7 instead. Maybe one day I’ll make a tutorial video of Jens lead on INTEGRA-7.

[@danielmago4327]

you are a keyboard god heheheh, keep it up

[@kerederoom78]

Thank you so much!

[@MatheusDinizsr]

Can this be made on the Fantom 06?

[@FurbyParade226]

Do you know if it's possible to replicate this lead on a Roland Juno DS?

[@kerederoom78]

It is difficult to make a real Jens lead with the Juno DS, but it is possible to make a similar tone. Look for a waveform in Juno DS that is similar to the one used in this video. Don’t forget to use a distortion pedal instead of internal fx. Ultimately, it is up to your hearing.

[@alannoto219]

i want this sound in my ax edge !! O_O

[@kerederoom78]

AX-Edge and FANTOM have almost similar sound source formats, so I think you can create the tone for this video with your AX-Edge!

[@eduardoantonio6432]

Hey could you replicate It on a Roland FA Series, It doesn´t have so many IFX :( ( I couldn't copy all configuration)

[@kerederoom78]

Sorry, I've never used the FA series, so I don't know the details But ultimately, in a Jens lead, a high quality distortion effect is all that is needed. I think you can create a tone similar to this video with the oscillators in the FA. Or try a guitar distortion pedal.

[@eduardoantonio6432]

@@kerederoom78 thanks

[@pauloafonsopereira]

Fodaaaaaa 🤘🏾🤘🏾🤘🏾🤘🏾

Shit man!!!... Please, could you make a tutorial for korg karma? ... Same lead... I subscribe... ❤️

[@kerederoom78]

Thank you so much! Sorry, I don't have a Karma, but you can apply the FANTOM methods of tone creation such as ADSR, LFO, Key Follow, etc. to the Karma. First, find a basic waveform in Karma's PCM libraries.And most importantly, you should choose the proper distortion effect.

[@edgardogonzalez882]

Now in Korg kronos Polysix :D

[@kerederoom78]

Edgardo González Yes, I also actually make use of Kronos's Polysix for Jens Lead!

[@ClaudioLariOfficial]

Can you add LFO to the Pulse Widht? It will add that meoww Jens tone has!

[@kerederoom78]

Thanks for your information!LFO modulation sound has got really better!

[@ClaudioLariOfficial]

kerederoom78 yea I’m sure although in all these years I wasn’t able to get an exact replica I used to get very close. Now my goal is to program it using only Plug ins 👍

[@kerederoom78]

@@ClaudioLariOfficial Excellent! I look forward to seeing you make Jens lead with just plugins!

[@traslasilla]

more like janne wirman's

[@kerederoom78]

yeah, I love Janne’s lead tone too!

[@ClaudioLariOfficial]

Same tone with Big Muff instead of Jd..at least that’s what Janne said! He made it with jv2080

[@traslasilla]

@@ClaudioLariOfficial I'm confused... who uses which?

[@ClaudioLariOfficial]

@@traslasilla Janne uses the tone Jens gave him but with a different dist box. Janne = Big Muff Jens = Jd10