How to make jet engine using soda can l diy jet engine l homemade mini jet engine

How to make jet engine using soda can l diy jet engine l homemade mini jet engine.
¶Hashtags:
#jetengine #turbojet #diy #howtomake
keywords:
Jet engine,
How to make jet engine using soda can,
How to make jet engine,
How to make a jet engine using soda can,
Diy jet engine,
Homemade mini jet engine,
Mini jet engine,
Electric jet engine,
How to make a jet engine from scratch,
How to build a turbojet engine,
How to build a jet engine,
Turbojet engine,
Pulsejet,
Building a homemade mini jet engine,
Homemade mini jet engine,
engine,
jet,
jet engine sound,
Thanks for watching 🙏.

[@matthewstorm5188]

Interestingly, this type of jet engine has been built on a larger scale. It is actually called a motorjet or thermojet. Experimental versions used a piston engine to power a compressor, which compressed incoming air. Fuel was added and burned. And the exhaust was accelerated through a nozzle to generate thrust. But this engine was superseded by the turbojet. The primary reason for considering this engine in the early days of jet propulsion is that it avoided the need for a turbine back when superalloys that could handle the heat of combustion were in their infancy.

[@gabtechexpo4017]

Great 👍♥️♥️

[@GiantSquid2319]

I thought it didn't need fuel. I thought the electricity would turned the air into fire.

[@thebigrex2096]

THAT DOES NOT EVEN EXIST

[@thek5197]

All he did was make an electric motor with a light on the end of it

[@dogking44]

Should probably clarify in the video description that it's a mock jet engine and not meant to be a proper functional build. Still a neet project though.

[@Blxz]

Great little forced air burner. But shaping it like a jet does not make it a jet engine. Might be nice to use for toasting marshmallows though.

[@MynameViv]

@matthewstorm5188 yes you're correct but the way i see it i just think he made an edf (electric ducted fan) used in rc plane models and then he atached a pipe that injects fuel so its not a jet yet a edf that burns fuel

[@Meme_buyer]

It is an EDF Afterburner

[@moizexe8566]

stop being so mean guys, it's not like he's creating an original jet engine.

[@HiddenKiwi]

this is not a jet engine but it does show how after-burners work

[@crocolierrblx9365]

Me: *Tries to make compressed air* KZbin: Homemade jet engine!!1!1!11!!

[@shubhankarsoman8514]

Making this in a cone instead of a can will produce thrust as it will actually compress the air

[@shubhankarsoman8514]

Additionaly, this video isnt bullshit, I mean do you really expect a soda can jet engine to produce thrust?

[@samuelm77]

If you had a fan connected to the compressor fan and made use of the accelerating gasses coming out the back resulting into faster spinning of compressor fan then you’d have an engine. Right now you just have combustion with consistent but minimal thrust.

[@keriddunk1520]

Bro.. this is just a look like . Not a an actual jet engine. 😂

[@axstaa-]

Instead butane gas what can i use Petrol Sanitizer Perfume Ethanol

[@Omnomnom-tq8zl]

Sorry but this is just a mini stove. if it's not self-sustaining, it's not an "engine".

[@theophil_2522]

😂😂

[@Striker885]

That thing you did with the compass to detach the end….I can’t do that without getting the chills

[@Ihaveseenthings577]

😂😂😂

[@handy-capoutdoors4063]

Almost😅 in a jet engine the exhaust gasses turn a turbine blade that is connected to the forward intake blade. The throttle is based on fuel input. You could use a t bone and slot connector to have a easy way to get it spinning with the electric motor in front. Then when you pull the starter motor away and it is self sustained it is a true jet. But what you have now is basically an electric ducted fan with neat after burner. Still a really nice proof of concept. Great work 🎉

[@gabtechexpo4017]

Thanks bro I really appreciate. You know such comments motivates me the more on creating better contents ♥️♥️👍 I really appreciate you 🖐️. Have a nice day 😘

[@jamiecurran3544]

That's correct but everyone has to start somewhere and this guy is on the right path along with people's knowledge and input!🙂✌️

[@gabtechexpo4017]

Thanks a lot bro for that motivation 👊

[@KurdishDK]

that turbine is a fan powered "jet", just wanna make it for a science fair ik it doesn't work like that but i dont wanna go actually make a jet, this is close enough

[@indepviewpt]

Not a jet engine but interesting.

[@dastimRETRO]

Boeing Mechanic here, this is awesome man!

[@PoseidonDiver]

Great build, with your skill i think you could make a pulse jet engine out of tin can. No moving parts required

[@thecampbells3908]

Yes! I was thinking that! I made a little one in college out of a Maglight! Obviously it wasn't going to run long, but it was fun to tinker with.

[@sudheerahewapathirana2331]

I think this Idea is usefull for blow torch or make high temperature foundry.

[@gabtechexpo4017]

Yeah

[@franciscopacobarreras9270]

That’s what I thought when I saw what it actually is, blow torch.

[@user-cp4vu8lb7c]

maybe mix fuel closer to the front so it combusts inside forcing air out not out side wasting energy

[@gabtechexpo4017]

🤨🤨🤨 Jezzzzzzz! That's crazy😂😂

[@kvanckart2267]

no combustion chamber and there is only one turbine but thats not a turbine that is just edf with flamable gas coming aout behind but its a good demonstration for a model jet like edf good job

[@gabtechexpo4017]

Thanks friend

[@islamabouelata6575]

Nice project but that's not how a jet engine works!

[@Bryan-oo5kw]

This is the coolest thing I've seen in a long time! Job well done to the young man who created this!

[@NBC_NCO]

I think this would make for a better personal heater.

[@gabtechexpo4017]

Fine

[@allandrake4426]

All the comments complaining about it not being a "real" jet engine, lighten up. Most of you likely couldn't even cook yourself dinner and would die of starvation if it wasn't for uber eats.

[@royhsieh4307]

This comment doesn't apply to me. I cook better than a hotel chef

[@ankurmadre-rs7id]

coca cola company after watching this video will definitely start a jet making company

[@kkolxasram]

Thats a fancy looking blow torch not a jet engine!

[@Iusename448]

Very great working principle The fuel I guess is not producing thrust due to low air intake nxt time use a more powerful and a big battery for more intake for a decent thrust output for the amount of fuel used

[@gabtechexpo4017]

Thanks friend 👍

[@Iusename448]

@@gabtechexpo4017 welcome Try upgrading the turbine blade with more fins with combustion chamber which will be easy to operate at high speed

[@gabtechexpo4017]

That’s exactly what am working on now, and the video will be released tomorrow 👍♥️. Thanks for your contribution friend

[@williamlazu3294]

I'm building a single seat WIG craft using jet engines that I hope to build.

[@gamercoolofgods]

soda air force finna be wild

[@caposey]

cocacola force one

[@leratosetlogelo7004]

Amazing simple DIY jet engine bro!

[@gabtechexpo4017]

Thanks

[@ozzymosco5046]

❤ the burning .....American American

[@nuherbleath461]

This is a fan driven blow torch

[@mikeschiavoni5973]

How the heck did you balance those blades? How much thrust is it producing??

[@MrMindaSchmit]

less than what it weighs clearly

[@user-yp8ko2cy9j]

Me encanta 👍👍👍 pero como emana fuego 🔥🔥🔥

[@patrioticbastard5935]

Cool but thats no jet.. edf with burner maybe... Gas powered hair dryer maybe..

[@MR-ht6wh]

Выглядит красиво, но нтхуя не работает 1 топливо не совершает никакой полезной работы и сгорает снаружи, это видно, камера сгорания должна быть длиньше. 2 сопло имеет только декоративный смысл и никак не увеличевает тягу 3 возможно это придирка, но двигатель должен раскручивать себя сам, с помощью работы газа, не должно быть никаких электромоторчиков. Он по факту собрал вентилятор с подогревом. Или зажигалку. Привет кстати с восьмого класса

[@siroyiryuu]

LOL, right, this is another Indian gimmick

[@mahrzkrieger4598]

Да, чел по сути тепловую пушку собрал и сидит довольный. Хотя не уверен что эта штука даже как тепловая пушка будет нормально работать. Если говорить по факту, у него вообще нет камеры сгорания, потому что видно как он вывел подачу газа в выходное сопло, это похоже даже больше на форсажную камеру для дожига топлива, но опять же весь факел уходит на улицу без каких либо препятствий и совершения работы. Чисто игрушка из баночки колы

[@U.S.A.O.I.L.]

Random person: Whats your plane powered by? Me: can

[@Games_and_carting]

How did you make the fire? Where is the fuel supply coming from??😊

[@joseviniciuscandidosantos6654]

4:09

[@joerusso4219]

Make a great desk fan for your office.

[@JordaneeEe-gn8fy]

So good new in build jet engine

[@user-ww6rt3kv3d]

That's really amazing

[@gabtechexpo4017]

👍♥️♥️

[@terrytheimpaler1204]

Should write a step-by-step guide. I would love to use this in my classroom for a project. However, I will have to modify it for more blades, an actual compression stage and combustion chamber, and make it a low-bypass turbofan.

[@gabtechexpo4017]

That's great.

[@crestdazoltral7705]

The single stage "compressor" (aka improvised fan disk) is only electrically driven making this closer to a blow torch than a jet engine.

[@cameronwilson1815]

Well it's a jet, it's called an EDF Jet.

[@YungAy-dg9my]

I’m gonna build this and make an airplane with it

[@Techniv]

Pretty cool. But technically it's more a compressed air intake blowtorch than a jet engine.

[@gabtechexpo4017]

Thanks

[@gabtechexpo4017]

THANKS FOR WATCHING

[@MREsylhetilonda]

😊😊

[@faizullahsayeed6996]

​@@MREsylhetilondauusjdbx🤣😆😂😂😍😍😍🥰🥰🥰😍😂😂😍😍🥳😪😴😴😏🥰🥰🥰🥰😍🥰🥰🥰🥰😍😍😍😴😍😴😏😏😏😏😏😏😏😏😏😏😴😴😴😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😏😌😏😍😌😌😙😘🙂😚😗😴😗☺️🥳😘😊🥳😚😌😙😍😏😌😌😙🥴😔😙😏🙂😌😗😌🙂😏😌😌😗😌😌😌😌😌😌😌😌😌😌😏😌😌😌😌😌😌😌😌😌😌😌😌😌😌😌😌😏😏😏😏😏😏😏😏😏😏😏😏😏😏😪😴😴😴😴😴😴😴😪😪😪😴😴😴😴😔😴😴😴😴😏😏😏😏😏😏😪😴😴😴😴😴😴😴😴😴😴😴😴😴😴😔😔😔🥴😔😔😔😔😔😔😔🥴😔😔😴😴😴🙇🙋💁🙅🤦🙎🏃🛌👩‍🦯👩‍🦼🤸🧍🧍🦸🦸🦸🦸🦸🦹🦸🦸🦹🦹🦸👷👷🦸🦹🦹🦸👹👹💨👹👹💨💨💨👸👩‍⚕️👸👩‍🎓👩‍🎓👩‍🚀🕵️👰🦹👩‍🔬

[@Boncreate]

Pin your comment

[@gabtechexpo4017]

🖐️🖐️♥️

[@imkarthikbhasi]

On what stance you call this a jet engine?The Shape?

[@LegendaryGames420]

Someone don't know how jets work 😂

[@phyllyweezy1]

African hands are very talented the brains are genius

[@gabtechexpo4017]

Thanks

[@DylanMartinRacing]

Bro’s got surgeon hands 👏🏻 Even if I knew how to do it, my hands couldn’t be that precise and smooth.

[@marcd1981]

It's called video editing

[@DylanMartinRacing]

@@marcd1981 Yeah because making hands not shake is “video editing” 😂

[@marcd1981]

@@DylanMartinRacingGo ahead and believe he actually built whatever that was without editing any of the video. It isn't possible to get that put together as quick as he was showing that glue supposedly dry. That's what the editing was 🤡

[@TotallyJuice]

You should probably place foil on the wooden pegs holding the motor or it would probably burn to a crisp (I don’t know much about this this is just my idea)

[@gabtechexpo4017]

Thanks friend ❤️ I think that's a great idea

[@mycroft16]

There is no fire in the can. The fuel nozzle is almost sticking out of the back and the fan is making sure it all blows out.

[@mattbennett5524]

You should not talk anymore

[@_WilhelmII.]

This is more like a propeller, but nice. Where do I get the parts?

[@JMan377]

This kid is the real Tony Stark. Making an engine with scrap metal. Genius. Make a arc reactor 😁

[@gabtechexpo4017]

Tony Stark you said

[@JMan377]

@gabtechexpo4017 yes, hopefully you know who that is

[@gabtechexpo4017]

Waw🤨

[@mbahdavid-ix2kb]

Great work gab tech expo I love this work

[@gabtechexpo4017]

Thanks my G

[@rcdoebbora8086]

Amazing ❤❤

[@gabtechexpo4017]

Thanks friend

[@user-ie5dv6mk2y]

Enjoyed every seconds of the video 😍😍😍

[@gabtechexpo4017]

Thanks friend

[@moooo8272]

Turn the soda can 90 degrees, now you can grill some nice steak in your backyard.

[@patrioticbastard5935]

If you remove power from the motor, does it sustain? If not, its no jet.. add more compressor wheels and a stator aling with a burn chamber with dilution holes..

[@RoflToks389]

Cant wait for integza to find this

[@zwyky3083]

Actually, integza build jet engine, compressor is still electric driven tho

[@als2695]

realy cool, i'm sure it can be improved to, great work

[@gabtechexpo4017]

Thanks fan

[@joetuktyyuktuk8635]

As a kid, I used to think I was pretty cool making little aircraft with wind driven propellers out of pop cans... I realize now, I'm just not cool anymore. 🤣

[@fi4nu]

great job

[@gabtechexpo4017]

Thanks 🙏🏻

[@jimmyforshee7865]

That is very awesome!

[@gabtechexpo4017]

Thanks a lot friend

[@litvinchuck_andriy]

This is very good video! Thank you for tutorial and explaining how jet engine works!

[@gabtechexpo4017]

You're welcome dear

[@melvinnoble8552]

More like blow torch but still cool! 😁

[@terranovarain6570]

That's really awesome You need a job in Hollywood fr

[@terranovarain6570]

Put a diffuser so it stops the rotation of airflow

[@terranovarain6570]

You know I believe you could make useable thrust with this would get a outrunner brushless and better fan though

[@gabtechexpo4017]

Thanks a lot friend ♥️

[@gabtechexpo4017]

👍👍

[@gabtechexpo4017]

Yeah ♥️

[@ArsenicShooter]

*His hands are more stable than my chair* 💀

[@gabriel.a.vsalazar.k4720]

intresting job. Well done

[@dominiccaruso7507]

That's actually really cool, im planning on making my own jet engines so this was a cool model to see

[@gabtechexpo4017]

Great

[@deanolson2581]

Is. There actually thrust

[@gabtechexpo4017]

Yeah

[@marexx2005]

there is thrust from the fan and little of the combustion but that cant be called thrust

[@phillipmiller1008]

Awesome job on the Video by the way , opening up with the Jet Engine already Firing up like that was fantastic... About damn time someone did THIS instead of endless PSYCHOBABBLE ....

[@jonatanmoewe9983]

That's not a jetengine, its a blowtorch. Besides, the glue want even survive 10sec

[@gabtechexpo4017]

Diy for fun♥️

[@user-ww6rt3kv3d]

Stop it can you do your own?☹️☹️

[@oloruntobaoluwadarewasiu8045]

Long life and prosperity

[@guybedau]

Very clever but not a jet engine, its an electric motor driven blow torch, still impressive...

[@sashankgaming6818]

In 10 years bros gonna make a. "DIY" homemade rocket engine

[@perrygilbert8276]

I’d give it 5 years lol

[@BrickEngines]

It’s just for show clearly not self sustaining but cool concept I guess…

[@ricardobosqui]

This is a "burner" the principle is the same like industrials ones uses in steam boilers for example

[@johnslugger]

*Nice Room Heater!*

[@EXIGENCES]

Hahaha close but no cigar , but quite creative 👍

[@user-gm1qx3hw5c]

What you use for fuel

[@kenan5141]

prob a small can of gas used for camping

[@MB-rp6od]

Maybe add a combustion chamber section behind using a steel canister or something to cover the flame that won’t melt with a turbine on a shaft back to the “compressor”. Finish it off with another coke can for the exhaust shaped like in the video and you have an actual gas generator

[@doubleedgedfist1535]

Super cool!!!

[@gabtechexpo4017]

Thanks

[@hakimziyech4030]

what was the cable thing you used before the combustion can you please enlighten me that part ?

[@gabtechexpo4017]

I was used to Power the DC motor

[@Thookudhurai]

Aeronautical engineer : 👁️👄👁️

[@slowpoke6743]

Can't tell if ur serious.

[@Thookudhurai]

@@slowpoke6743 I'm joking. You from?

[@luigi_vhb2159]

where did you get the stuff to inject the gas inside the engine? Like the copper pipe and more?

[@gabtechexpo4017]

I got it from a refrigerator spare parts store

[@LukeNganodinma-gq1dc]

What gas/fuel was used

[@gabtechexpo4017]

Liquefied petroleum gas ( cooking gas)

[@arsnotorious]

Wow.. kid.. if you are a kid.. you have a bright future ahead of you.😊😊😊

[@gabtechexpo4017]

Nice

[@TragicGFuel]

He does not lmao

[@ghcreativestudio]

Don’t mind the negative comments, u did a great job 👏

[@gabtechexpo4017]

Thanks friend ♥️

[@EmanueIMihai]

Cool flame thrower 😂

[@gabtechexpo4017]

Fine

[@vittorio2783]

Genius!!!!!

[@MAli-xs2pm]

The real challenge though is : Would it fit a A380?

[@hurairahsartandcraft4515]

dude it aint even a jet engine

[@MAli-xs2pm]

@@hurairahsartandcraft4515 lool, Agree 😀

[@systemmm86]

Nice🎉🎉

[@gabtechexpo4017]

Thanks

[@user-yp8ko2cy9j]

Grandioso 👍👍👍👍👍 aguan más

[@SSRABIT]

gracias mano no me acordaba cómo abia hecho mí Antigua turbina era parecida a esa pero yo no batalle corte las laminas y ise los sirculos

[@user-oe4jx5tb6x]

Does this create thrust?

[@doofball500]

No. :(

[@thecampbells3908]

Yes it does! The $0.47 electeic motor and aluminum fan certainly create thrust. Is it enough to do anything with? Probably not. But it could be measured, yes. The flame is gas expanding, so would also produce a tiny amount. I think on a small cart with good bearings it would roll across the floor if the battery and fuel tank were onboard.

[@roninxyasha1439]

What kind of glue is that

[@alexandrucapatina]

Whit what did you connect the wings to the motor? P.S i LOVE ths idea.

[@gabtechexpo4017]

Little piece of pop sticks

[@alexandrucapatina]

@@gabtechexpo4017 thx! Im gonna do it

[@gabtechexpo4017]

Great

[@aiozard]

Hi! Great DIY! Can i have a list of the materials used? We have a project comming up on turbine engines

[@gabtechexpo4017]

All materials were shown in the video ♥️♥️

[@paulmurgatroyd6372]

This looks like a video from 10 years ago.

[@UshankadMenace-ti9xi]

Glad I wasn’t the only one who thought that

[@alapal175]

bro why is this jet held together by woos?

[@user-cg1dr5mn9b]

My mom: 👁️👄👁️

[@memeid7781]

Masterpiecee🔥🔥🔥

[@SummerYolo]

The guy doesn't need N.A.S.A., N.A.S.A. needs him, and don't make a war inside this comment.ok?

[@gabtechexpo4017]

Thanks

[@SummerYolo]

Thanks for commenting too.😊

[@alpscraftshack599]

"N.A.S.A. needs him, ..." - that is the funniest thing I ever heard. NASA does a pretty good job of making phony things on their own.