How to Make Jewelry

DIY ear cuff, middy ring, and stoned rings. Get 2 months of Skillshare free: skl.sh/shmoxd6
I tried to get most of the material I used from home.. but some of the things I needed to buy was those helping hand things, some silver, flux, blow torch, and some silver solder. (other things I used that I just had at home was a hammer, pliers, tape, a file, sandpaper, scissors, tweezers, and a rock/turquoise)
We're going to make the ear cuffs first. Cut out a piece of silver that is like .25'' x 1" . You can buy silver that is already about that size so you won't have to cut anything... but I'm just going to use my scraps:)
I rounded out the corner by cutting it off then file and sanding it down. You want to get rid of all the rough edges.
Next take some pliers. These ones have teeth on them, so I wrapped them with some tape. That way it won't scratch up the silver too bad as I'm bending it.
Get the silver as round as possible ( and the size you want). To get it more round.. take something that is round that it will fit on. Put it on that round thing and hit it with a hammer with it pressed against a hard surface.. until its nice and round.
Next I'm going to make a little middy ring:)
First we need a little wire. So I cut that out, straightened it out with pliers and by hitting it with a hammer on a hard surface.
When you work with metal; bending it and hitting it with a hammer.. it will work hardened. That means is will get all stiff and brittle. To fix that you are going to anneal the metal with a blow torch. Anneal basically means to get it red hot.
I just a used a little kitchen blow torch to make all the rings:) and I also overcooked some Creme Brulee..
When annealing the metal be sure to keep the flame moving.. Thats a good tip for when using the blow torch always... or you will melt your silver.
The silver should now be easy to bend with your hands so you can make it nice and round. Fit it on your finger to size it up... then cut off the excess.
To solder the ring together you can't have a gap. So bend the two sides past each other and pull it back. It should have enough spring in the metal that it will stick together now:)
Next you will use some flux. That will help the solder stick to the silver and flow better. Put some flux on the part you want to solder together then torch it till it melts. Then add your Solder. (There are three different basic silver solders: Easy, Medium, and Hard. Hard melts at the hottest temperature so it is hardest to melt.. then medium.. then easy- being the easiest to melt)
I was using the wrong Flux so it wasn't working... I Finally got the right flux and it worked! So after you've melted the solder, dip the whole thing in water to cool it down. Then pull on the solder joint to see if it worked.
If the solder holds, you can file off any of the bumps and try to get rid of the seam so you can't tell where it was soldered together. Then sand of any of the fire stain you get from torching the metal.
Next I want to make a ring that has a stone in it. I was either going to use a piece of turquoise or this rock that Roms and I found while in Moab:)
When making this ring I had 2 basic parts.. the band and the part that hold the stone.
First I made the prongs that hold the stone by soldering two wires together in a lil' X. Be sure and use Hard solder to make that part. When making the band you will also want to use hard solder- That way when you solder the prongs to the band... you can use easy solder and that will melt before the hard solder (which is holding your band and prongs together) does.
Using those basic tips you can make almost any ring:) including the ring I made for myself at the end.
Here is a link to the stuff I bought:
Helping hand clamps: amzn.to/2shVktV
Blow torch: amzn.to/2FjVwkN
Silver sheet: amzn.to/2QB2KlB
Flux (the right kind): amzn.to/2SKmZiP
Silver Solder: amzn.to/2AGFAVV
Things I wish I bought:
Jewelry pliers: amzn.to/2VETyAC
Metal cutting scissors: amzn.to/2SNxzp6
Silver wire for band: amzn.to/2THlcLA
Silver for Ear Cuff and Bezel: amzn.to/2FlIdkb
So those are all my Amazon Associate links.. but tbh you might find the stuff more easily on a site like www.riogrande.com
Follow me and watch the art process:
Instagram: / shmoxd
Twitter: / shmoxd
Spotify: open.spotify.c...
Facebook: / shmoxd
Buy some stufffff from me: www.shmoxd.com
Subscribe: www.youtube.co...
Like. Comment. Share.. or what ever.. ¯\_ (ツ) _/¯

[@sarahn.2296]

I love your videos for so many reasons. One, you're just a regular dude teaching others how to diy. Two, you show when you make mistakes, which I think is great for the learning process. Three, the fact that you put the narrative in the description is so inclusive to those with hearing problems/deafness. Four, I think it's sweet how much you obviously care for your girlfriend. 😊 You're the best, man.

[@gratefuldoge8598]

Thought that was his sister lol

[@causeofmyserendipity8562]

Also his voice is amazing

[@faaaa__]

Sarah N. “Regular dude” 🤔 Im not sure about that..

[@Shmoxd]

☺️☺️I’m flattered

[@gratefuldoge8598]

Shmoxd can you make dog nametags or wax seal stamps please‽

[@kyliefulton6866]

i didnt know who Romie was so i thought he was referring to his pinky the whole time. i was like “oh he just named his pinky thats cool” ...

[@Shmoxd]

Hahahahahahah i’m dead 😵😂

[@alycias7345]

ME TOOO!!

[@fallweather874]

so did i 😭

[@AC-ce8ul]

✋🏼 I did too!

[@caleroberts4707]

Lol saw this on insta

[@spudrina]

making matching rings is the cutest thing and those trampoline shots were adorable y'all are CUTE wow

[@Shmoxd]

She makes me look cuter than I am☺️

[@ciaras3170]

Why did I read it "y'all are cute now" Lmao😂

[@alanashanah]

Very rad ✌️

[@jaylee4695]

Your intro will never get old

[@Shmoxd]

I might be making a new one... hopefully it’s as good as this one 🤞🏻

[@Kirihere]

I love it

[@andromedashun6697]

Needs to be a How to Twerk tutorial. lol

[@vloggerfilms1018]

Justin Lee Hold up baby! I’m not a nkoght I’m a donkey

[@only_FANtasy]

@@Shmoxd make sure you are twerking in it too 😂

[@sneezer7972]

The king has returned

[@blackninja9400]

wtf is this shit?

[@Shmoxd]

Haha I’m glad I have black ninja in my life to keep my head level

[@Kat-uh6ex]

I appreciate the including of trials and errors.

[@Shmoxd]

I got lots of em:):) hah

[@miriamsokora4554]

I love how its just called "how to make jewelry". its so vague. could mean so many things. yet we all still click. love it

[@Shmoxd]

Hahah I was worried I may have been too vague

[@Wingysart]

I really appreciate that you keep the mess-ups in. It's so much more authentic than most how-to's.

[@R.N.19]

It's cool you engraved the inside of your rock ring

[@Shmoxd]

Haha I couldn’t fit “shmoxd” in it... so it just said “shmox”

[@R.N.19]

@@Shmoxd lol it still look good

[@OvniLad]

yahoooo, it all looks awesome! Also, it'd be absolutely great if you did the kits things, I usually don't know what or which items to buy for crafts, that would make it hella easier

[@Shmoxd]

I’m working on getting a patch making kit together too:):)

[@Robotneonunicorn]

Ooo I’d be interested in the kits! It’s hard to find uncut silver material in person

[@Shmoxd]

I think I’ll have to get some together..

[@isabellenuttall6034]

@@Shmoxd yes please! I've got 3months of nothing to do this summer and finding your channel has motivated me to spend it productively creating things :)

[@angelasterner]

I appreciate that you show us the parts that’s don’t work exactly right the first time and that you keep going until it works

[@KateandEvatoys]

I really like how you show us your mistakes and fixes. No ones perfect and sometimes it takes some trial and error before achieving a new craft :) sometimes it can be a bit frustrating watching tutorials and it looks as though the maker had no issues at all and in reality no craft goes 100% perfect.

[@mschanandalrbong]

One of the best how to videos because of all the mistakes and learning from the mistakes. Thank you!

[@maebellesison9728]

Honestly, this is the only channel i know that makes unique DIYs.

[@acidification]

Oh how I love that you included all the blunders because they (1) show us basic humans that even masters like you may have their moments (2) help us avoid repeating the same (3) are incredibly entertaining.. thank you!

[@Wolfgirl2412]

The rings are poppin and please do the kits

[@Shmoxd]

Thanks!! And I have some stuff in mind to a kit:)

[@sevenseven1190]

I really really appreciate how you include mistakes and how you went about troubleshooting them!

[@thebeanman6935]

this man out here really making his own wire. mad respect.

[@shadowalnut572]

Really love the repetitive shots of mistakes and explanation of what went wrong !

[@ChiiUso]

I really love that you showed all of the mishaps and issues you had doing this

[@mackofalltrades3155]

So creative! I'm glad you show your mistakes and how you work through them. Takes some serious patience! All your videos are really great. Your diys are stuff that people would actually want to try! I appreciate that you dont just create content for the sake of needing more content. Another thing I like about your videos is that you show how you've made multiple things instead of just a couple. Like your crochet video for example. Keep doing what you do cuz it's really awesome!!!

[@XxBubblePinkGumxX]

I know what I’m doing before I go back to college next week so I can show off these jewelries that I totally didn’t make them myself 😎

[@Shmoxd]

😎😎😎

[@vloggerfilms1018]

LuluxAnemone Hold up baby! I’m not a nkoght I’m a donkey

[@Michelle-xx5ye]

I need to do some of these. Everything I wear should be made by me inspired by Shmoxd .

[@Shmoxd]

That would be so rad! Keep me posted ya?

[@Zoraloner]

I love how you keep your mistakes in the video! Really helps me out

[@madisonhetrick1257]

I took a jewelry class in high school for a few years so I was doing stuff like this everyday. It’s so much fun!

[@Shmoxd]

Riiiight!? 🙌🏻🙌🏻🙌🏻

[@TheUnicornMoe]

your videos are always so inspiring!! i really miss my metal smithing class and i thought i wouldnt be able to do anything like that again without all the bells and whistles, like with a bench and bench pin or an anvil or drill press. seeing you make some beautiful stuff with scraps, scissors, files and helping hands really reinforced that you can do and make anything if youre creative enough.

[@Shmoxd]

Thaaanks!:):) I want to try to make more things found at home.. but sometimes I feel like my home has more supplies than an average house hold

[@Xmiikkii3X]

You legit inspire me so much every time you put a video out and you just make me want to go out there and do my best

[@MeabhR]

Yes to the kits - I have a bunch of craft/jewellery making stuff already, but it would be very cool to have the kit as a template for future projects!

[@luziastern5410]

Ok I just have to say your channel makes me smile! The fact that you arent afraid to make mistakes and try new things, and maintain a positive attitude throughout long processes like this is so admirable!!

[@Lil_tapatio626]

It’s 3:30 in the morning and I found your page and now can’t stop watching. Might have to go to Michael’s tomorrow...

[@evabernh]

Omg I was literally thinking during the video that I‘d love to try out your projects but it’s always so expensive to get all the materials (in sizes you probably don’t even need). I love the idea with the kits! Even though I‘m from germany and shipping is probably gonna make it expensive but still, great idea!

[@Shmoxd]

Yah international shipping is always a lil pricy:S but I’ll see what I can do

[@evabernh]

Shmoxd ♥️

[@magicaljealousy7523]

Dude your videos are so unique and I love how you put your own creative spin on the simplest things!

[@Shmoxd]

Thanks so much!!:):)

[@natsblogs]

you are such a diy aspiration for me. I already diy a lot of stuff for myself, more than anyone else i know, but i'm nowhere near this level. I hope to get there one day!

[@susanf4698]

10:16 that attention to detail with the signature? so dope

[@kylar.8859]

You should totally make little kits, that would be awesome

[@acidification]

The rings are so cool I half wished you will sell more of them on your site but it will lose some of the special meaning for the rings for you and Romney.. cute gifts btw, show us the crotchet blanket!

[@Shmoxd]

I need to show you the blanket! It’s like a sleeping bag that looks like a pizza

[@cheyennet9060]

Your solder did not flow the first time because there was firescale (the black stuff on your metal from heating it that you referred to as fire stain) on the metal, the flux probably would have worked if your metal was cleaner!! Using a toothbrush and some soap to clean the metal would help, ideally pickling the metal after applying heat. Also if you apply the solder while the flux is still wet it should essentially hold it in place before melting. AND applying flux to your entire piece will help lessen the firescale :)

[@emileewatson4845]

pickling the metal lol

[@Shmoxd]

Does any flux work too?

[@cheyennet9060]

@@Shmoxd I'm not sure what flux you originally used, but any flux should work (though I cannot peak on flux used on electronics, i would think that its just a lower grade but i dunno). would just stick with handy flux if you're just soldering jewelry as an occasional hobby. Its a go to for hobbyist jewelers because its cheap and decent. There are definitely different types of flux, like handy flux is a borax-based compound that provides substantial oxide protection but often leafs a tough glassy skin often referred to as "flux glass" but that's easily removed with pickling and/or filing and sanding.

[@abigailmorgan3400]

I enjoyed this, and it will come in handy when I need a refresher on what the process is. I would do a couple things differently, just from me watching from an outside POV, but this was very helpful, and you're very talented. It's nice to see someone who really tries, and makes his gifts and projects nicely done, and makes them really beautiful.

[@SophiaWilson]

Awww matching rings! He is so sweeeet!

[@deannamarasco4327]

I ordered a hand ring so long ago and I still have not taken it off since I got it. I love it so much, my finger is permanently tanned in the shape of it. Im obsessed with it.

[@vampiresquid985]

Ring kits would be super cool!

[@tamara10]

Making jewelry and creme brulee, a man of many talents

[@victorott8171]

The ring kit idea is super cool! Like a little Shmoxd Lego set

[@Shmoxd]

Haha I will use LEGO as my inspiration

[@exf6275]

Good idea to melt the flux before adding the solder, I never thought of that but it seems like it would make getting the solder in the right spot way easier. Also good to know a brulee blow torch works well!

[@evanhenderson5608]

We love you shmoxd

[@Shmoxd]

Ily tooo:)

[@becca.s]

you're like a chill silversmithing teacher which is nice because my teacher was legit scary

[@ashlieohms]

They're so ridiculously cute together.

[@yardenoved599]

A kit would be really great! I love your videos even if I don't actually plan on making any of it, they're just super cool and satisfying to watch

[@indiArtsCrafts]

Kits sound awesome! This video was so well-made and sweet!

[@gavinflanagan3227]

I would 100 % be down to buy kits ! The jewlery looked so good and fun to make !!

[@shanegogue7785]

I live for these vids and yesss the kits sound amazing I don’t want to by a whole bunch of random stuff for one ring

[@clairefugate855]

if you’re having trouble with balancing the sauter, in my jewelry making class, we always just set the pieces on a cement block before torching them so that it was easier to handle without dropping it

[@gabrielmartinez3032]

Love both of rings n kits would be helpful

[@NZ-Brew]

Dude 100% do some kits - Great idea!

[@Shmoxd]

💯

[@julieth7072]

YES please make a kit; it's so expensive to get all of the specialized stuff for one project!

[@TheV1CT0R1A23]

Am I the only one here to think he's underrated ?? 'cause this channel has some badass quality content

[@jonathangoldstein3227]

Love your new and old intro. Best i've seen on youtube. (Your content is top shelf as well.)

[@mollievickers6338]

You should have a go with sliver clay ! Feels and acts like clay then you blow touch it , which burns away a binder and leaves you with solid sliver :)

[@Shmoxd]

Ive never heard of that! It sounds amazing!!

[@iamlove7110]

Your so talented. Million suscribers coming this year.

[@Shmoxd]

🤞🏻🤞🏻

[@iamlove7110]

You make it look easy. Good teacher.

[@sadiewillisjane9620]

Man your videos are honestly the best. You have such unique project ideas and you put so much effort into doing them well and making sure your audience could do them too. I love it sooososo much

[@Discodoos]

I took a jewelry making class a couple years ago and fell in love...unfortunately it was too expensive to continue on. You've totally inspired me to buy a few tools and make jewelry at home. thank you man, I appreciate all of the creative genius you share with the community p.s. you and your girlfriend are stupid cute

[@CordLawrence]

Made some chopsticks today, really felt like my guy Shmoxd (missed the uploads, glad ur back)

[@Shmoxd]

Oooo I’m in the mood for some panda...

[@1or3..]

This came out just in time! I was trying to think of a new project to do in sculpture lol

[@Dorisumi]

Cutest creative couple ever

[@ciniimiin]

I'm so happy that you came back man

[@joc.4501]

My two cents: You may want to use a piece of cloth between the block and use a leather covered hammer as you can transfer impurities onto your silver - when you solder, it'll include the impurities affecting the longevity and maintenance of the ring. More important for 925. Also easier soldering process in general. The leather can also help prevent unwanted marking and nicking on your metal.

[@PerfRoy]

u just called me single for 11 minutes. the rest is just that metal thing flying around edit: im shook u didn't reach 10 million by now!! so underrated

[@iamrolo]

I am a jeweler and this honestly made me so happy , lol.

[@deni3119]

I'm starting a jewelry making course this year. This is awesome, thanks for making this video.

[@destinygamez567]

Making kits would be so cool!!!! Please do, it would make it so much more convenient!

[@NexusPhotografi]

I still need to make myself a hand ring,like urs.lol great vid, glad y'all are back🙌😁👍✌️

[@sedadilarakuru3139]

AAAH! you make everything look so simple&easy. real encouraging. yall are so cute :)

[@calebbell9993]

The kit sounds perfect!

[@sophiamit]

omfg didnt know boyfriends like this still exist wow

[@Shmoxd]

Tbh... this makes me look way better than I am 😅

[@PanicLedisko]

Haha right?? And mine (fiancé) just passed away so it makes me miss him even more..

[@jessine]

Would looooove if you made kits to make jewelery!!! That's a brilliant idea!

[@brendanrichter1569]

White text on a white background. Classy.

[@slashnspread8429]

People saying his intro will never get old, will never get old

[@kaloma84]

A kit would be pretty sweet. I have a food torch already so 👍 yeah. Happy New Year!

[@עמיתנחמני-ל5ע]

Yes kits are a great idea!

[@errorerror9716]

The kits are a good idea cause I was very confused on the things you said you were using

[@Marie-qc5sn]

You videos always make me wanna Do the stuff you made. Also I like the style of the jewelry a lot 😍

[@Bramptin]

killing it brother! keep making dope stuff...

[@Shmoxd]

🙌🏻🙌🏻🙌🏻

[@Beyuna]

I love the idea of a kit! I have a bunch of crystals that I'd love to turn into rings! Awesome video, always so interesting, keep them coming!

[@sunshine55992]

You should really use a hide mallet to ‘hammer’ the silver to get the round shape. As using a metal hammer can add unwanted scratches and dents to the silver (similar to using pliers with teeth) Maybe adding a cloth or some fabric to your hammer might help avoid this if you don’t have a mallet? Just a thought! Love the video, haven’t seen anything like this on KZbin!

[@emiliealexander9395]

i would love buying one of those ring kits!!!!

[@countingcards3607]

I like the intro... Always have 😊

[@Shmoxd]

💃🏼

[@wiktoria5863]

Been watching your videos for a while now! Really love that you explore all the areas in art and design.. I'm glad you also have explored metalsmithing. It's very underrated work of art. I do jewelry design as a career actually and it's hard work for sure. Wishing you all the best for 2019 🙂🙂🙂

[@sarar.7688]

I study jewelry and sometimes I feel so clumsy seeing how other people in my classroom work... Now I don`t feel it anymore LOL Nice video.

[@injusticevii]

Finally introducing Romie to us all 😂

[@jishingchang6537]

Just found your channel & now I'm bingeing your vids lols

[@matt1999malta]

Hey Shmoxd, I think kits would be great, not just for the rings, even for the screen printing or stickers and stuff. I think you can market them really well.

[@Shmoxd]

Ooo i didn’t even think about screen printing kits.. I’ll have to look into that too:)

[@matt1999malta]

@@Shmoxd I personally would definitely be interested in buying a screen printing kit more than the rings cause its something I can reuse

[@liminal.lizzie]

You always have such quality content!!

[@Shmoxd]

Thank youuuu:)

[@lskidz45]

Kits would be amazing!!! I love that idea :)

[@maxypad0293]

I love watching your videos they make me feel poor but I love them 😍 you give some great tips and tricks. I can do a few of them it’s just I’m to lazy.

[@lakeishajoshy1059]

Finallyyy, a new video! Love your videos, I keep looking forward to them.💓

[@HobbyRat]

I'd love to buy a kit. Brilliant idea, as always. The rings and cuffs turned out hella sick. (As always)

[@cassidydeneau7076]

I'm about 30 seconds in and I'm already hyped to watch the rest!! Top quality content as always

[@hannahmatias]

Found your channel because of this video and omg,... I’ve been binge watching since yesterday,.. moreee need moreeee ! That intro tho, epic ! Keep up the good work!