Amazingly easy. Got my printer 2 days ago and made one
@rewinderg52573 жыл бұрын
That's one crazy enclosure you've got there fam. would love to seee more about it
@greatestever5312 жыл бұрын
Very nice ! Much success
@over-ray-act2 жыл бұрын
I've been tinkering around with my printer and making these lithophanes lately and now I want to do a Puzzle Lithophane
@DarrousHadiLEGO_ROBOTS2 жыл бұрын
I would like to see the results of what are you making 😎
@Braincho3 ай бұрын
Great job and explanation! I have some lines visible mostly on flat surfaces, but not only. Looks like a small horizontal seem. Like underextrudion or breaks or something like this, sorry I can't explain it properly. How could I fix it? Also where you get those 4-LED stand projector ?
@DarrousHadiLEGO_ROBOTS3 ай бұрын
@@Braincho hi, It is a printing problem, is your nozzle is old you might want to change it for a new one, and make sure you are using the right printing temperature and that you are not printing too fast. For the LED strip, you can find the link in the Thingiverse link, I bought it on Amazon.
@Braincho3 ай бұрын
@@DarrousHadiLEGO_ROBOTS TY for quick answer! The nozzle is new, I have printed like 15ish items... Will check the speeds - what speed you recommend or you use? About links to the LEDs - not working anymore :(
@DarrousHadiLEGO_ROBOTS3 ай бұрын
@@Braincho 50mm is good
@pbrstreetgang95432 жыл бұрын
Well done. Thanks!
@wwallace814 жыл бұрын
Good choice for music. I printed few of these in the past using 3drocks. Lately when i went for tall pics, i get warping and as the print gets half way it tilts a bit and i lose it. I am using a raft but still not stable enough. Any suggestions? My other nonlithopane prints turn out fine so it s not a generic warp problem.
@DarrousHadiLEGO_ROBOTS4 жыл бұрын
What is your printer?
@arm3000 Жыл бұрын
Thanks, battery 2400ma, can they fit? 3000 mA but I can't find them! thanks again and congratulations
@jimpon2 жыл бұрын
itsa nice! i like...
@davebenemerito3103 жыл бұрын
How did you design a perfect fit enclosures for the lithophanes? I want aslo to design custom enclosures but I'm not sure how to have a perfect fit. Thanks!
@zennozangetsu11644 жыл бұрын
Fantastic video!
@DarrousHadiLEGO_ROBOTS4 жыл бұрын
Glad you liked it!
@WilliamsburgWildcats3 жыл бұрын
Great video and product! Do you have a material list for the cactus? What led/light?
@DarrousHadiLEGO_ROBOTS3 жыл бұрын
A normal LED strip would work. This is the link for he project on Thingivers for more informations :www.thingiverse.com/thing:4375606
@noyzvideo Жыл бұрын
have a link for the MicroUSB female connector and LED ?
@DarrousHadiLEGO_ROBOTS Жыл бұрын
LED card : (fr.aliexpress.com/item/32800350649.html?spm=a2g0s.9042311.0.0.279f6c37dHbS1E) Micro USB port : www.amazon.fr/gp/product/B07W13X3TD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
@MultiAnnelore2 жыл бұрын
hello very nice work but can you tell me de height and widht for litho to make shore it fits the cactus please
@DarrousHadiLEGO_ROBOTS2 жыл бұрын
Hi, all the information you need are in the description box under the video 😉
@joumanabakar11964 жыл бұрын
Bravo Hadi
@jamesjb123 Жыл бұрын
I made my lithophane for the night stand and its to small for the base. I put all the settings the same
@DarrousHadiLEGO_ROBOTS Жыл бұрын
That could happen sometimes, it depends on the printer, make sure that you don't have an elephant foot on your prints, or you can try to sand the lithophanes down a little or print the base at 102% scale ! Let me know if you have other questions !
@sammysu52663 жыл бұрын
Great video thanks just a question don’t you need to use meshmixer?
@DarrousHadiLEGO_ROBOTS3 жыл бұрын
Nope, why would you use it ?
@sammysu52663 жыл бұрын
@@DarrousHadiLEGO_ROBOTS hi dude sorry for my understanding I’m still new in 3D printing . It’s something about fixing the lines or triangle in the picture so cura can read it better. Is that right?
@DarrousHadiLEGO_ROBOTS3 жыл бұрын
Well if you have an .STL file you can print it directly, CURA will have no problem with it. To create my .STL I used CATIA V5, but you can use any software as Fusion 360 or Solidworks or mecshmixer.
@sammysu52663 жыл бұрын
@@DarrousHadiLEGO_ROBOTS cool thank you for the info 😁 Appreciate your time
@commandosyamim16304 жыл бұрын
I see a CATIA user, I click like
@DarrousHadiLEGO_ROBOTS4 жыл бұрын
CATIA RULES 😎
@-CR42Y-3 жыл бұрын
Wanna ask to, what is the model of the LED that you using on yours battery version?