Check out more of my complete builds, walkthroughs, and HD-Foam at www.SKSProps.com
@MariaRivera-rl9wj3 жыл бұрын
From all my fails and so much videos I have watched ...I wish I would of found your video sooner..Thank you so much!
@SKSProps3 жыл бұрын
You're welcome!!
@SpellboundNails Жыл бұрын
Thank you, thank you, thank you!! You saved my cosplay. I put on my (last minute) store bought Loki horns last night for some final tweaks and they cut me! I tried sanding them, adding foam inside and nothing worked. They were still super jaggy so I jumped online and found your pattern. I had some 6mm and 3mm foam so I glued 3 layers of 3mm together to get close to the 10mm and whipped up some horns in 2 hours plus painting and I'm wearing them to con today! They could be a little more polished of course but for a quick build that won't cut me I'm so happy!
@SKSProps Жыл бұрын
Fantastic! Glad the video could help you out 🙌
@TheSmartin1023 жыл бұрын
Sounds funny but my mind was blown when you used the dremel for the v cuts. I use an xacto knife and my v cuts were very inconsistent, plus sometimes I never truly cut the v accurate enough, either too thin or too wide. Never once did I think about using the corner of the sanding drum on the dremel to do the v cuts! So much simpler as well. Thank you for broadening my knowledge!!!
@SKSProps3 жыл бұрын
You're very welcome glad I could help! 👍
@TheSmartin1023 жыл бұрын
@@SKSProps I apologize for the follow up, but i was going to attempt to build this, but i noticed the template was in PDF. I have never used PDF templates before, how do i go about scaling something that is in PDF?
@SKSProps3 жыл бұрын
@@TheSmartin102 Open the pdf in adobe acrobat or adobe reader (free version) then click poster in the printer setting that will scale it properly
@elodieanoname80332 жыл бұрын
Always amazed how generous you are for sharing this knowledge with us. The templates are free and so are those videos. Also you go straight to the point and we are not buried under a tone of ads. Thanks so much !!
@SKSProps2 жыл бұрын
You’re welcome! I’m glad so many people like the videos and learn some of my tips and techniques 👍
@BeyondArtistry3 жыл бұрын
Okay, so this is the first time I came on this channel, I am utterly impressed!
@ashenwarriorprops3 жыл бұрын
That metallic is amazing! Great work!
@SKSProps3 жыл бұрын
Thanks Ashen!
@SarahU20002 жыл бұрын
I made this and Lady Loki following your videos. They turned out so good, I’m still shocked that I made it lol. The only change I made was I used gold leaf rub n buff on top! I already had the rub n buff because I refinish antiques. I love the gold look it gave it! Today was the day my daughter had to wear it to school and everyone is going crazy over it 💛
@SKSProps2 жыл бұрын
That’s so awesome to hear! Glad I could help 👍
@trytofinishsomething3 жыл бұрын
Between you and Odin ... you guys are killing it!!
@SKSProps3 жыл бұрын
Thanks! He’s a great builder as well and a good friend 👍👍
@trytofinishsomething3 жыл бұрын
@@SKSProps Agreed ... known @OdinMakes for 20+ years and he is a great builder and super human being!
@rikaika41782 жыл бұрын
Thank you for this. I made one for a friend whose kid decided late in the week that they wanted to go as Loki for Halloween. A day later and I was able to present this to them. Side note: first time using your HD foam and what a difference it made. Fantastic product!
@SKSProps2 жыл бұрын
Thank you! And that’s so awesome to hear!
@fakermakerprops39483 жыл бұрын
Nice! I made mine in December, about a week after the trailer came out, I'm super happy with that one! (Edit) it's my profile picture too
@SKSProps3 жыл бұрын
Way to go! 👍
@fakermakerprops39483 жыл бұрын
@@SKSProps thanks!
@jehnyappyx33 жыл бұрын
As always, such great work! Can't wait to try this headpiece 😍
@SKSProps3 жыл бұрын
Thank you very much I really appreciate it! 👍
@nigroglicerina48203 жыл бұрын
Thank you so much, your prints are the best on internet!
@SKSProps3 жыл бұрын
Thank you I’m glad you like them! 👍
@sammyraywelch42152 жыл бұрын
You sir are a god!
@CherylMuir3 жыл бұрын
Exceptional attention to detail.
@SKSProps3 жыл бұрын
Thank you very much!
@BlankityBlank2 жыл бұрын
This is the first video I've seen from this channel and I'm already hooked. Well done!
@SKSProps2 жыл бұрын
Thanks! And welcome to the channel 👍
@diogo.rodrigues.18843 жыл бұрын
Not a big fan of the Marvel Universe, but an awesome job Steve! The tips on the painting technique are top notch!
@SKSProps3 жыл бұрын
Thanks! And personally I’m more of a video game guy myself but I really like Loki
@KnoviceCosplay3 жыл бұрын
The paint job looks great! I gotta try using a reddish primer for gold paint
@SKSProps3 жыл бұрын
Thanks!! 👍
@MacoroGamer3 жыл бұрын
Free templates?? Thats asome dude, thank you so much!!!
@SKSProps3 жыл бұрын
You're welcome! Have fun with the build!
@thenewlc2 жыл бұрын
thank you! i forgot to order a headdress for my daughter on time for halloween, but i'm pretty sure we can knock this out in time.
@SKSProps2 жыл бұрын
Fantastic! 👍👍
@thenewlc2 жыл бұрын
@@SKSProps we did it! we had to make due with some different foam thicknesses bc the craft store was low, and we cut some corners bc of time, but it still turned out awesome! and now we have the tools and a TON of leftover foam so we can do more projects and take our time.
@TheSmugglersRoom3 жыл бұрын
Awesome work as always man!
@SKSProps3 жыл бұрын
Thank you very much!
@OtherSarrah3 жыл бұрын
Love your work, always enjoy watching :)
@SKSProps3 жыл бұрын
Thank you very much!
@aprilblackregentart66473 жыл бұрын
I love this! Lots of great tips here
@SKSProps3 жыл бұрын
Thank you! 👍
@tonyukcosplay17193 жыл бұрын
As always brilliant prop and tutorial cannot wait to build this
@SKSProps3 жыл бұрын
Fantastic have fun!!
@MDeLorien3 жыл бұрын
Absolutely stunning 🖤👏🏻🖤👏🏻🖤👏🏻🖤
@SKSProps3 жыл бұрын
Thank you very much! 👍👍
@philabot3 жыл бұрын
That looks awesome, thanks for sharing
@SKSProps3 жыл бұрын
Thanks and You’re welcome!
@madhavkwatra58884 ай бұрын
Looks Great Thinking of cosplaying LOki in ComicCon But i dont really know i will be able to do it.
@SKSProps4 ай бұрын
Lots of people have made them using my templates might as well give it a shot 👍
@jessicavazquez15593 жыл бұрын
Can you please do a tutorial for loki daggers or sylvie daggers? Trying to cosplay for Halloween, we live your videos! Extremely helpful and easy to follow!
@renova943 жыл бұрын
Hey. I find your tutorial really great and am looking forward to rebuild the crown itself👌💚. I have only one small problem. I live in Germany and there are not these glues. What can I use instead? Thanks for the help. 🙏🙏🙏
@SKSProps3 жыл бұрын
You can use any contact cement or super glue you wouldn’t need to use these specific brands. Have fun with the build 👍
@kaelap63112 жыл бұрын
Make friends with an American stationed at a military base and ask them to grab you some from the commissary.
@goatelope75393 жыл бұрын
Sweet and simple
@SKSProps3 жыл бұрын
The best kind of builds! 👍
@blizatrex3 жыл бұрын
This looks awesome.
@SKSProps3 жыл бұрын
Thank you very much!
@rodrigolopez41343 жыл бұрын
beauty work dude, hero! thanks x 1000
@SKSProps3 жыл бұрын
Thanks! And you’re welcome!
@MrFTW3 жыл бұрын
Great build!
@SKSProps3 жыл бұрын
Thank you!
@terriwhyte80643 жыл бұрын
great video, i like the dremel for v groove idea, i will have to try it
@SKSProps3 жыл бұрын
Thanks! 👍👍
@shanghaifry2 жыл бұрын
So awesome!
@monstermorguetutorials31393 жыл бұрын
This is so AWESOME!!!
@SKSProps3 жыл бұрын
Thanks!
@allisonalarcon21543 жыл бұрын
Thank you so much for this!
@SKSProps3 жыл бұрын
You’re welcome! 👍
@aayushgautam89302 жыл бұрын
Tysm for the tutorial and the free template! Just wanted to ask if I can make it with cardboard instead of hd foam
@SKSProps2 жыл бұрын
You’re welcome! You can try the cardboard won’t bend to a complex curve quite like the foam will
@trekguy663 жыл бұрын
Very well done!!!
@SKSProps3 жыл бұрын
Thank you very much! 👍👍
@fauxmarmorer95443 жыл бұрын
Might make this for my girlfriend(Loki is her favourite character too), thank you good sir, maybe maleficent head piece one day too?
@SKSProps3 жыл бұрын
Thanks and I hope she likes it. I am always looking for new ideas just depends on what inspires me week to week 👍
@itsmehan_ Жыл бұрын
so excited to make this! just one question: how can you print it off for use without abobe? it's not available to me ToT
@lindavalentinagarcialb51103 жыл бұрын
Amezing, is beautifull
@SKSProps3 жыл бұрын
Thanks!!
@sethandalexa2 жыл бұрын
Any chance you’re planning to give Kid Loki’s crown a shot? 😁 Bought all your foam!
@karenritter25742 жыл бұрын
Love it
@MissedUniverse_Cos3 жыл бұрын
This vid was amazing! By any chance, would you make tutorials of the x-blade or the Master's Defender keyblade?
@Andres-oy1ll3 жыл бұрын
Amazing
@SKSProps3 жыл бұрын
Thank you! 👍
@amesjahhh53123 жыл бұрын
Hi! I'm planning to make this but I have a few questions :) 1. my head is slightly smaller, will it work if i just print the template a smaller size? 2. i don't have a dremel so can i use sandpaper? 3. will the results differ if i omitted the primer and just used the rubber paint and spray paint? Thanks!!
@SKSProps3 жыл бұрын
Yep just scale it a little bit You’d want to use a pretty high grit to minimize the fuzzies rougher sandpsper will leave. Might look into getting a rotary tool they are pretty cheap online these days You can use any paints available to you
@amesjahhh53123 жыл бұрын
@@SKSProps thanks man!! cant wait to make it
@sophieliu17722 жыл бұрын
Can you do a tutorial for how to get a template
@happinessyay49343 жыл бұрын
I'm very new to working with foam (and any cosplay stuff in general) and I don't have access to a Dremel tool. is it possible to do an acceptable job using an x-acto knife and varying grades of sandpaper?
@SKSProps3 жыл бұрын
You can easily cut foam with a knife but sandpaper will have a tendency to make the foam fuzzy. You can get a rotary tool for about $20 with a flex shaft if you plan on working with foam a rotary tool is pretty necessary Check this one out m.kzbin.info/www/bejne/bZuUk2Oaidplr5o
@thelord50103 жыл бұрын
Can you make sly cooper cane
@MariaRivera-rl9wj3 жыл бұрын
I noticed you don't cut on the lines..Is it because it's way easier to beval the edges?
@SKSProps3 жыл бұрын
I'll usually get close then clean it up with my bandsaw, scissors, or the dremel. Helps me get the angles of the cut just right
@scottalynch2 жыл бұрын
Approximately how wide are the 2mm strips at the base of the horns?
@SKSProps2 жыл бұрын
Not big approx 3/8”
@scottalynch2 жыл бұрын
@@SKSProps thank you. I will tag you when I post my lumberjack Loki pics
@gonerfish27103 жыл бұрын
Can you do Gwyndolin crown from Dark Souls?😭 its kinda hard tho😔
@jannalee91193 жыл бұрын
Can we use gold paint? would it work okay?
@SKSProps3 жыл бұрын
You’d still want to seal the foam first with Plasti dip or mod podge but after that you can use regular acrylics
@jannalee91193 жыл бұрын
@@SKSProps thank you so much!
@bruntchicknugget Жыл бұрын
what is the size of the paper print out , A4?
@SKSProps Жыл бұрын
Paper size doesn’t matter watch the how to print templates video
@Puquito3 жыл бұрын
isnt Plasti Dip toxic or bad to skin? Im a bit afraid to use it
@SKSProps3 жыл бұрын
Plasti dip is not good for you while spraying it that’s why you need to wear a respirator. But after it cures there are no skin issues that I’m aware of. If you want not toxic brushable options check out some of my other videos where I use Flexbond, plaid fx, and creature cast
@rubyb6663 жыл бұрын
is there any alrernitvie to a dremel
@SKSProps3 жыл бұрын
I did a review on a $20 Wen you can check out kzbin.info/www/bejne/bZuUk2Oaidplr5o But you pretty much will need some kind of rotary tool when working with foam
@r.skorem71853 жыл бұрын
Warhammer 40k ork gun
@SKSProps3 жыл бұрын
Made a pattern over a year ago might have to eventually dig it out and put it together. It was a Bad Moons rendition 👍