How to make long-range WiFi antenna at home

#wifisignal #longrangewifiantenna
How to make long-range WiFi antenna at home
If you like this video don't forget to subscribe :)
subscribe to my channel: / qthink
My other Videos
Cooler for SSD you need it!: • Cooler for SSD you nee...
CPU Thermal Paste Methods: • CPU Thermal Paste Methods
2 Ways to Open a Lock: • 2 Ways to Open a Lock
How to Twist Electric Wire Together: • How to Twist Electric ...
How to make a USB extension cable: • How to make a USB exte...
How to Convert Cordless Drill to Corded: • How to Convert Cordles...
Chia Plotting and Farming Budget PC Build: • Chia Plotting and Farm...
Two ways to sharpen a razor Gillette: • Two ways to sharpen a ...
Vaccum cleaner filter DIY: • Vaccum cleaner filter DIY
Track: Jim Yosef & Alex Skrindo - Ruby [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jim Yosef & Alex Skrin...
Free Download / Stream: ncs.io/RubyYO
Track: KIRA - New World [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • KIRA - New World | Syn...
Free Download / Stream: ncs.io/NewWorld

[@QThink]

Thanks for your comments........!

[@sandeepkanwer1]

how can we contact you for an application support.

[@sandyjorhat]

I think the 2nd element should be isolated from the rest as the whole thing is grounded by the threaded center rod.

[@MetaJamm]

​@@sandyjorhat Zero potential in all centers, so no need isolation. Antennas about waves, not electricity. Also coaksial cable impendance ohms is not about electrical ommic wire resistance.

[@haritimalsina4119]

Real

[@jfrphoto01]

@@MetaJamm LMAO!

[@mixerD1-]

I know this type of diy video traditionally has "get up and go" music attached to them, but its not necessary...majority of viewers would prefer to hear an actual drill drilling sound than electro gunk in the background.

[@rabokarabekian409]

Yeah! and the smell of ancient lead flux I have had for over 40 years!

[@LifeSavingDefense]

If found this cool thing for when you don’t like sound called a volume button. Works every time. The music is fine but I do prefer someone talking however I also know how making videos is not as easy as it looks when we think too much about what people think so just make the videos or just watch and enjoy life Thanks for the video

[@mixerD1-]

@@LifeSavingDefense Fair point buddy😂😂😂

[@kupertempleton7551]

Same

[@ILuvMzk]

That's why I just mute lol

[@english-ranith.b.y.arachch5256]

I'm a Sri Lankan teacher. I had to face network problem when I was teaching online. I had gone out side to teach before built this antena. Anyway, now I can do the classes at home safely. Thank you, thank you very much for your very useful explanation.

[@QThink]

Thanks

[@dhoniputhuna134]

Sir oya kohomada meka haduwe?

[@english-ranith.b.y.arachch5256]

@@dhoniputhuna134 mama me wage videos kipayak beluwa. Tin ekakin rawum tika kapala thiyena size walin, e duara walin hayi kala.

[@RAJkumar-qh9mc]

U have mu respect TEACHER GURUJI

[@someguywithopinions]

omfg fourth time I've seen this comment on four different videos, sit down bot, I hope someone unplugs the dell pc you run on.

[@MrSloppyLoppy]

Well it is working great with my Rockwell wireless card for sure. Kali is working great with a boost of 16gb ram as well. I was able to run it through an amplifier to modulate it further. Doesn't take much to push off the neighborhood.

[@Vegan123]

Less music, more sound from the activity

[@dr.bharatbapodara3223]

Watched it in 2x speed... amazing.!!

[@i-_-i2080]

Wwoow

[@memeemeee3034]

Good idea. Imma do it 2

[@sy_ox]

It brings the video to life, feels like a rave lol

[@SG-uh6sw]

Watched it in 16 x speed

[@sarah18687]

BAD ASS! Thanks for the share!

[@johnevans737]

A little correction for those of you that think he shorted out his antennas on his wires in a Wi-Fi antenna set up there is only one antenna that is broadcasting a signal the second antenna or the second cable on the outside of the antenna is just a shielding cable hooked to ground to keep the signal from being contaminated he may be routing some of the signal back to ground but he's not losing all and only the first three discs two or three discs are sending the signal where he soldered it the rest of the little dish are just there to isolate and pinpoint the signal

[@TheRealStephenAllen]

Took the words right out of my mouth. You must be a software/hardware engineer too?

[@waltercunningham8215]

No he's a senior walmart greater

[@TheRealStephenAllen]

@@waltercunningham8215 well then I am sure he can direct you to the tampon aisle. you really are a proper cunt. Cheers mate.

[@NightDrivingCanada]

Hey John would you be able to help me I have a 5 ft microwave dish from a cell tower it's in good condition I want to be able to receive long-distance Wi-Fi signals how would I go about it

[@rajuawale6147]

Sir I asking you, tell me can it is possible wifi signal received hand made wifi signal received antenna ? Because I confused I don't understand this is real or fake.

[@hyper_focused_man]

How did you make the feets for the DIY Wi-Fi antenna, you didn't show that? Would also like to see some follow up video, where you show that the antenna work.

[@akhilbillam2676]

You need to show us before and after signal strength ...

[@timotb1]

Yes. Before and after signal strength needs to be seen. And if these things really work, why aren't they being commercially produced in quantities.

[@kapilsingaria1165]

@@timotb1 Because, government regulations. And you can actually buy 9dbi or above antenna commercially and replace them with old ones of your router.

[@timotb1]

@@kapilsingaria1165 could be a valid point.

[@rraahhuulliiyyaa]

I m using this... thor thanked me for sharing my wifi signal frm asgard🤣

[@yasinanugrah137]

can your signal reaching me at outer dimension?

[@rraahhuulliiyyaa]

@@yasinanugrah137 150 rs lagega

[@1llu5i0n3]

@@rraahhuulliiyyaa hey bro, is this work?? If yes then how much range ?

[@kabarodadkasaaxiibkaa5165]

This is really

[@martingoga6918]

This antenna is awesome .

[@mmolinag]

Buen video! ;-) gracias por compartirlo

[@hoperestoration5595]

liked by heart really amazing work

[@naftilos76]

Were you able to calculate the passive gain?

[@janbalga7702]

Great idea. I have the same router at home so I could try it.

[@skarifali8031]

Result?..

[@pheonixflyer629]

It looks like a satellite, like the voyager probe 🤣😂

[@Venom47971]

its so pretty

[@innovativatk]

I would like to see the comparative of signal before and after using the antenna, but apart of this good video

[@Le_Mouton_Noir]

I need that too

[@jpval3484]

There's the russian guy who did it he can make up to 3 kilometeres with two of these just search wifi gun

[@MrJoeyplatinum]

It appears as if there is a direct short if the shielding ground is actually connected to the solid coper stinger as it seems both are attached by solder to the conductive threaded rod.

[@jfrphoto01]

Yes, a dead short! This is a scam! Connecting this to a working router will short out the tx/rx circuit and damage the router! Notice he never applies power to this router before or after the connection of this fake antenna!

[@KuntalGhosh]

U should have connected the shielding of the cable to the ground! This way the signal would be much more concentrated and lower losses! 2.4ghz signals will have grater loss anyways

[@wellboyscience8478]

Unfortunately he used 75Ohm TV cable which is not suitable for 2.4GHz WiFI It will reflect and attenuate the RF signal

[@abdullahal_quhaif2824]

is this directional transmitter antenna ? can i make another one like your designed antenna for RF 433mhz trasmitter ? pleas help

[@edwardseth1230]

At the end would it be possible to get a signal gain video, drive off to any direction where the signal is weak to none, set this gizmo up and show the speed gain, before setup n after setup.

[@jack.k5721]

I need to try it at home!

[@didiersee]

Congratulations and thank you for sharing.👏👍

[@victorgabrielrodriguezruiz124]

What material are the round metal caps made of??, Brass??

[@computor15]

Parece interesante, sería tan amable de decirme para que sirve? Mis conocimientos sobre el tema son casi nulos

[@mevartson164]

Is there any plus or minus polarization?

[@Bianchi77]

Nice info, thanks :)

[@RafiqulIslam-rx1zs]

It will work of range sender? Or as a receive? Sir, please tell me.

[@3rd_Millennium_Engineering]

Hello QThink, Very cool; thank you for sharing this. :-)

[@bungeegum6064]

it s tested and it s perfectly doing its job keep up bro

[@QThink]

Thanks

[@NagaEvolution]

Thank you! what size drill bits did you use?

[@NagaEvolution]

@QThink Please let me know I need to build one tomorrow for school

[@balramsiew3015]

Very nice 👍 video educational but I think a schematic diagram of it and a parts list would be great

[@priyarajan6528]

Is this a reciver or sender ( does it send WiFi signal from the router which has internet to a device ? Plz tell)

[@guillermadera2946]

Thanks. I use your work.. And some alien in outerspace now can connect my wifi..

[@GAMINGZONESTRIKE]

Nice concept but you have to show the range of this made antenna and the actual antenna that was already with the router.

[@l.rod2827]

You soldered the shielding to the signal wire???

[@user-kz1xi9hv8p]

如果將天線端的線延申後直接焊在HAP裡面天線的焊點上可行嗎?

[@MrApolloTom]

I would get a piece of cable with the correct plug manufactured into it, it won't be matched as well to the line if you connect it as at 5:54

[@m.gardner6173]

looks cool. i had lots of luck making a reflector dish and putting a wifi dongle in the focal point. doesnt look as cool though.

[@user-ie6hf8gl9g]

it looks ok, how about the performance?

[@rickrose2235]

How could this work? He soldered the coax ground and center conductor to two different metal plates but there connected by the threaded rod ???

[@n0ukf]

While it is a DC short, it is not a short to 2.4GHz RF. The wrong spacing however would be the wrong impedance, decreasing the effective signal.

[@igtommy6311]

Scam

[@prabinprasadtrpathy5529]

Which material you used for this? Iron or copper plate??

[@justinchen8347]

I love your videos! Can you tell me the final length of the antenna? It seems like the screw is 15 cm, but I am not entirely sure. I need to make an antenna that is at most 15 cm. Thanks!

[@zertz]

wifi lab?

[@fredelevator280]

Бро,а почему ты обе провода соединил с антенной,не замкнет?

[@ClosedCasketEntertainment]

correct me if I am wrong but considering that the back plate is the ground shouldn't it be isolated and not making contact with the rest of the antenna?

[@JuanPabloSantistebanGuillen]

No

[@victorarunachalam4645]

I'm tried made it.now received alien's wifi signal from other planet...wow what amazing

[@truthoverfiction]

What size were the canning lids?

[@rm-go3xb]

You will be the next Nobel prize winner 🌚🌚

[@celtic5764]

I’m trying to figure out how I can do that with a belkin N300 USB Adapter. I don’t have a router or phone line in the workshop and I’d like to be able to get online on my laptop.

[@raffaelebarlotti9017]

Hi, nice video! I would like to know the central hole is 6 or 8 mm? Thanks.

[@LIFEGADGET]

Thanks! I finally can communicate with my family back home in Andromeda

[@sic1650]

HAHAHAHA wtf

[@mrmagoo6966]

if you use it with a modified s10 , interstellar Skype

[@LIFEGADGET]

@@mrmagoo6966 LOL

[@preyasprathap]

you should have also displayed the speed improvement. and when showing the disc diameters you should have used black text,it's harder to see below diameters. any way nice video.

[@QThink]

I'm sorry, I'll be corrected in the following video about the antenna

[@mohsinraza1699]

kzbin.info/www/bejne/g36kXqyMoteLb5I watch this video similarly

[@excelbazar4613]

you're correct dude

[@jonathanbetarmos7934]

L

[@So1ipse]

@Brad Bowman Could you give us the URL of your video? You're joining quite an exclusive elite, hardly anyone bothers to put a video up to warn others not to waste time following fake instructions. Most of the complainers just say 'that wuz rubbish' and leave people to guess. In fact most of the complainers haven't even built the thing they're complaining about :( It's good to see someone doing right by uploading proof,

[@1986mattymatty]

Warning! Be careful not to slice open or cut off fingers doing this. De-burr razor shard edges of discs.

[@onepunch7919]

.

[@kkrish-ur1ob]

.

[@kalilinuxuser3490]

We're not fucking lunatics who make mistakes cutting ourselves. Your parents made you by mistake so tell them to be careful next time.

[@muneeb12757]

Right some people don't know it's dangerous

[@Judas_Is_Carrot]

Great!! Watched this video so that i can catch a stronger wifi signal from my neighbour which is basically stealing and now i have to steal one if their antenna to make this work.. Amazing job (not)

[@kengseantan3259]

the plates u r using is what material？

[@KhanSharief]

No actual test.

[@sajjadhussain8675]

Do we solder Reflector and Main Driven element together at the end or just the main driven element?

[@nissimzur1]

Were is the real life testing showing before and after range improvement ?

[@hanzlashahid6789]

How many kilometer covered area? And what product are use for making antina.... And what wire are use to joined antina...

[@mariogarza7796]

Can connect a parabolic antenna to router to get wi-fi ?

[@r2tv_R47R]

Wow..AMAZING

[@artemartemov1174]

Styped если по принципу направленно вибраторный антенны мультивибраторы должны быть разделены диэлектриком ( а там все контачит на 1 болт)

[@sev7895]

Не, это нормально на таких частотах.

[@edzelcasamina1163]

do you have a another video for this antenna? the result or speed test from with and without it? thanks

[@KingLordLele]

This video, is fake, you shouldn't believe it

[@Ximi959]

I have trying it same. Not working is face 100000000000%

[@dipalinikam7187]

So much of hard work

[@Rick-pr6du]

I'll make this if i have my own wifi or tv and a job.

[@paulstubbs7678]

That's the point of this sort of DIY, done super cheap, so the lack of money (job?) is not a great impediment. Also having a decent WiFi beam means you can remotely access free WiFI from home = more savings.

[@josephthibeault4843]

The first metal top should Be 8.90 cm

[@mahmoodjamdar7701]

Amazing 😉

[@cocotaco_875]

Radiation pattern of atenna please and frequency band?

[@bechirmahjoub5733]

Is it working?

[@Niyazmen]

For all of ur questions please search for Kreosan guy making it

[@paulstubbs7678]

Interesting set of tools, you start out with a vernier calliper, good but then proceed to cut the metal with scissors! Or after determining the lid centre, you use a felt tip marker.... How about a centre punch, or at least a nail and small hammer. There's nothing more off-putting to a new constructor than having his drill skate all over the place, the whole point of a centre punch.

[@Chan-rc2hw]

At least he made it and made a video as well..

[@hemi4722]

Maybe he doesn't have those tools? He just used what he has. Chill man - not everyone's got use force every single tool in existence

[@takeover4726]

wont you get a more stable signal if you isolate the second disc? the actual antenna disc.

[@billypyscho3747]

Its work without usb cable off company yes or no please reply me

[@niranjannixon3427]

God bless you

[@onepoint2320]

I'm using my router as extender. My neighbor allowed to share their wifi, but I'm not getting poor signal ,is there ay way to optimize the extender range?

[@JSP-ur3mi]

Is there no performance evaluation video?

[@kissszilard412]

I used copper instead that metal....and works fine (i ve got really good speed at 1 km range).I think it should be isolated correctly

[@TechnicalUstadji007]

Can you please guide me?

[@rashadabdullah9769]

I saw another vid on youtube( i think it got reported) but the guy used an old satalite dish lol. I think he got 4km range im not sure tho

[@majid5145]

Hey do anyone know what this plate called 1:11

[@shamyah]

It's trade off between directivity and coverage.

[@arifulislamakash5827]

@Meadow Apple how

[@nawazishali7936]

both wires are shorted. how's this gonna work ?

[@dwarslopers]

Only for DC.

[@michaellin4553]

Shorting is not an issue for RF when done correctly, this is necessary to achieve an impedance match and lower the VSWR. Without it, this would radiate terribly.

[@luzvimindavargas9225]

@@dwarslopers hdklkhkkjlhlkhdsjlghglljjddlfllhkkkf

[@johnevans737]

@@michaellin4553 just a minor correction and I know this because I'm an amateur radio operator and also a technician when you are trying to create a antenna that shoots a signal directionally you need to especially have your ground plane which is the negative side of the coax to stop the signal needs to be separated from the hot center of the coaxial call it for the RF signal he does need to have that rear plate isolated as far as for RF the RF impedance imbalance can be corrected through coils or other things that are put on there but then the signal won't be correct he actually needs to match the length of the antenna to the length of the signal he is trying to radiate if you get that length perfectly right in the right ratio then you will get a perfect impedance but you also have the wire to worry about in other portions that's why they use coils on antennas and slide the the antenna parts up and down inside out and make them different links and that

[@randomcatontheinternet2771]

it would been lots of cheaper if i had the tools you using

[@rubenmontoya336]

Show how it works

[@draedonmaze198]

Wasn’t easy to get it turned on but when I did all the birds flew away and haven’t come back and the neighbours dog can walks straight line. think I made the circles wrong, i need an undo antennae.

[@AliKhalil]

@@NotCocoyuyop *an

[@bestskateboardsclub6147]

Can you explain how does it work? why did you use the circular plates? What makes it able to fire signals at long range? What material did you use? How did you know the spacing for the plates?

[@pakoltak5880]

no one knows that

[@Sima.Chakrabarty]

Circular plate for catching good signal.

[@teehan2486]

0:44 what is this plate material called?

[@themaximusone]

Why did you not use copper coils in between.

[@pranilkumar]

Wow!!!!! 👌 nice

[@wrestletogether]

Well , signal will communicate or not how it will work

[@fundooskills]

Nice!!

[@jackiechan3599]

Mine works !

[@biggeorge191]

It seems to be too small. Dimensions of elements have to be around lambda/2. Is it two band?

[@MetaJamm]

TIP! Caliper can measure between things if turn other side))

[@glen4cindy]

A parts list would be nice. What are you using for the plates? They look too thin to be the ends of soup cans.

[@QThink]

yes, they are the ends of soup. Thanks fo your comments.

[@conniethesconnie]

looked like they were from canning jars

[@unoyoshiblu700]

Neighbors: Dont use our wifi!! Also neighbors:

[@markrich4570]

Your 2nd disk is soldered to the positive wire and the ground wire is touching the 1st disk which is touching the 2nd dish through the threaded rod thus shorting the coax leads together. The 2nd disk needs to be isolated from ground.

[@QThink]

ok, I try it Thanks!

[@noliiii2001]

is this stainless disk? thanks

[@Natsumidragneelkim]

I wonder how did you stop the attenuation

[@gaminglife3703]

Is circuit safe from heat and blasting??