How to Make Money Scrapping Stuff From Home!

[@scrapitall200]

Thank you for watching 😃 If you enjoyed this video please like/share. If you are new here, please consider subscribing 👇 youtube.com/@scrapitall200?si=Nnz9jYyjsDKQKA64 God bless you all!

[@ThatsRightRecycling]

Good morning Scrapper

[@scrapitall200]

@@ThatsRightRecycling good morning 🌞

[@noneyabeeswax3200]

Sometimes I spend hours in my shop to make like 7$,I could have made that in half an hour working at McDonald’s,I may have even spent 20$ in gas to get the junk to make the 7$ and I have to pay taxes on the 7$ 🤷‍♂️ I can’t stop,it truly is a sickness. Love your content buddy 👍

[@scrapitall200]

Having fun is invaluable imo, so if we are sick for being hobby scrappers, so be it 🤣 Thank you!

[@Virginianative1968]

Thank you for the heartfelt prayers for everyone dealing with devastation from Helene...it was definitely a sober reminder that we are NOT in control of Mother Nature. Take care my friend and keep on scrapping!

[@scrapitall200]

@@Virginianative1968 you’re welcome! Did you get hit by the storm?

[@Virginianative1968]

@@scrapitall200 No - we just got pretty heavy rains and some wind but little damage in our area in the Northeastern part of the state. It was our western mountain neighbors who got the worst of it. Watching the videos and photos of the damage is just so mind blowing.

[@scrapitall200]

I’m happy you didn’t get any damage of issues. Yeah I’ve seen quite a few videos. The destruction is unreal 😢

[@davidbolton184]

We only lost power for 5 days.with generators running no food was lost due to spoilage,and no structural damage either.we we’re truly blessed

[@scrapitall200]

That is so wonderful to hear! 😃

[@stackerMannsrabbithole]

Everytime i watch your videos i think how cool it would be to load up and go on a scrap run with you. Gods blessings brother, and to all the hurricane victims 🙏

[@scrapitall200]

That would be fun. God bless you too brother. Yes, lots of prayers needed 🙏

[@saschakonze6867]

Hey SiA! Nice video of miscellaneous things. Thank you for that!

[@scrapitall200]

@@saschakonze6867 thank you my friend!

[@crazybear357]

Thank you for your prayers. I'm here in Greene county Tennessee. Things are getting better here water getting turned back on. there has been plenty help and supplies brought in. And we thank everyone who has help 🙏

[@scrapitall200]

You’re welcome! That is so wonderful to hear. We Americans always step up when disaster strikes! God bless you.

[@scrapitall200]

@@alyb8058 God bless you!! 😃

[@gearheadglen]

I use an air hammer fine chisel and other bits to take apart small motors fast with minimal effort

[@scrapitall200]

@@gearheadglen awesome, very cool

[@ThatsRightRecycling]

Awesome job, Scrapitall, and thanks for the mention. We all are praying for the people affecting the hurricane🙏 ❤

[@scrapitall200]

Thank you my friend. You’re welcome.

[@richardhulbert9480]

I am most amazed by the clean workbench. I have so much "I will get that later" i need another bench.

[@richardhulbert9480]

I've stripped lots of those transformers. Piece by piece then unwind the copper. Your way is a bit faster.

[@richardhulbert9480]

I saved crystal osscilators till my can was full. I spent more on chemicals than the silver is worth. I no longer take them off the boards.

[@scrapitall200]

I try to clean my bench after every time I scrap. I’ve done it that way before. I like the chisel quite a bit. Oh cool, thank you for sharing that I’ve often wondered if they are actually worth removing. You think if silver reached $50 an ounce, they’d be worth refining then?

[@tugboatshorty]

I learned a lot from this video…now I know how to get copper out little transformer with the chisel and vice! Can’t wait to try it great video as usual 👍

[@scrapitall200]

@@tugboatshorty awesome! The chisel I used was quite dull, so I imagine with a sharper one it’ll work even better. Thank you!

[@GDSavingThePast]

Yes prayers for all that have been affected by Helene. I think I see a theme at the beginning, it is cold out and you are scraping things that could keep you warm. I haven't watched Big Stack in a while but he does do amazing videos and all those bars he has poured are incredible. Cool trick using the chisel Love seeing all that copper.

[@scrapitall200]

Absolutely! I’m really happy seeing our fellow Americans step up and doing incredible things for those in need. I just watched his last video, his stack is up over 3,300 pounds! Amazing. Thank you and that chisel is really dull, I know it would be way better if I learned to sharpen my chisel lol Thank you for you support 😃

[@GDSavingThePast]

@@scrapitall200 I think you said that your scrap yard wouldn't take poured copper or brass bars but it would be very cool if you bought a furnace and some crucibles and did some pours like Big Stack does. Have a great weekend my friend

[@scrapitall200]

@@GDSavingThePast I am actually planning on doing that next spring/summer. I think it will be a lot of fun. Thank you and you do the same!

[@ScrapMan69]

I scrapped a hair dryer before not much in them! And I feel so bad for all them people they have lost everything! Your name fits well like to scrapitall buddy! You took the words right out of my mouth them things can start a house fire quick! My worst enemy always gotta go off in the morning and wake you up to go to work hate em lol never seen it done that way it’s new for me buddy! I’m surprised you didn’t use your good ole machete you can definitely increase the value of everything by taking it apart love taking stuff apart another great video have a great weekend my friend! God bless!

[@scrapitall200]

Yeah I do to 😢 I like the chisel method, not as hard on my shoulder. You got that right buddy, it all adds up and definitely worth the trouble. Thank you and God bless you too my friend.

[@dorianarmeanu3831]

Hello! I was waiting for a new video from you! I learn new things! Hello from Cyprus!

[@scrapitall200]

Hi there from Cyprus. How are you?

[@scrappingonthefly77]

That was a significant increase! Heck yeah. Thanks for sharing brother. God Bless the hurricane victims..

[@scrapitall200]

Not too bad! Amen to that brother. It’s incredible the destruction 😢

[@NeverEvil1]

On optical drive devices, there are tiny neodymium magnets to control lens focus. So if you are a rare earth magnet collector, theres another source for you. There are also tiny copper coils on the optics and one or two laser diodes, sometimes those are gold coated.

[@scrapitall200]

I collect them but just the ones from hard drives. I do have a few from them and they are powerful for their size. Some do but not all, if they are copper, I’ll grab them. Thank you for watching.

[@scrappingonthefly77]

26:22 WELL,,, There goes movie night.. Thank you for that one ! Lmbo 😂

[@scrapitall200]

@@scrappingonthefly77 no DVD for you 🤣

[@scrappingonthefly77]

🤣 Grrr

[@scrapitall200]

@@scrappingonthefly77 🤣

[@joeygomes139]

I love your videos and your patience..you are truly a loving spirit and wish you all the blessings you can handle

[@scrapitall200]

Wow, thank you so much, I really appreciate that. God bless you and all of your loved ones.

[@stevenbennett667]

Hi brother I love your videos and every time im feeling down you always lift my spirits. Thanks and God bless you.

[@scrapitall200]

@@stevenbennett667 praise God for that brother! 😀 I am truly happy my videos are helpful in any way possible.

[@chasebarnard1223]

Hi mR. SCRAPSITALL!! 😊 Hope all is well

[@scrapitall200]

@@chasebarnard1223 I’m doing well, thank you. How are you doing?

[@chasebarnard1223]

@@scrapitall200 I'm still scrapping little by little.

[@chasebarnard1223]

@scrapitall200 trying to keep my streets free of appliances here in Joplin Missouri!

[@scrapitall200]

@@chasebarnard1223 awesome! You have pretty good scrap prices there?

[@chasebarnard1223]

@@scrapitall200 I've been hoarding mine for the past year.

[@terrychain-xo8uu]

I don’t think i want to use a space heater ever again . Yikes it’s so hard to know if a wire is having an issue . Not a good source of heat . Great video James

[@scrapitall200]

@@terrychain-xo8uu it’s a great example why they should never be left unattended. Thank you!

[@terrychain-xo8uu]

@@scrapitall200absolutely agree !

[@andrewrossi7164]

Great video my friend, God bless

[@scrapitall200]

Thank you so much God bless you too 😃

[@Kreacher1974]

I use my rotary tool to cut the brass off the plastic before I pull them from the board. Great video as always.

[@scrapitall200]

That’s a cool idea, thank you 😃

[@TheGforcead]

Those heating elements are called Iconel, I have a friend who used to sell them to his local yard, somewhere in Virginia. I do this for a living and even I learn from your videos. We are not just making money for ourselves, we helping keep good stuff out of landfill. Thanks for the videos and the knowledge!

[@scrapitall200]

@@TheGforcead I thought the inconel is non magnetic? Exactly, keeping stuff from the landfills is very important. Thank you so much.

[@TheGforcead]

@@scrapitall200 it is non magnetic, I was just giving you it's name. My local yard doesn't buy it. I see it in space heaters and any electric heat situations, it goes in no 2 shredder for me

[@scrapitall200]

This stuff was magnetic. My yard just buys the inconel as stainless steel. Thank you.

[@TheGforcead]

Isn't it funny, some yards call it no 2 shredder, some yards call it white goods. The catch all for "other" stuff not worth picking out . Yeah, on your die cast tell your viewers some yards dock you for die cast/ pots metal if you put it in your aluminium. I found this out putting clean pots/pans and die cast in with aluminium. Depends on your local yard rules my local yard just changed a rules, copper tubing and Romex size wire, no 1 is no longer no.1 if it has oxidation, is dull and not shiney , all no 2 now.

[@scrapitall200]

@@TheGforcead I have mentioned that before. It’s hard to say the same things over and over again but I do try to let people know how important it is to know their yard cause they are all so different. Yeah, I’ve noticed that since copper keeps going up in price, they are getting stricter with what they consider #1 or bare bright.

[@ipaddlemyowncanoe.7441]

I like taking these things apart. I do the same thing. Maybe not go as small as you do but I take the majority of the stuff. One more thing, I had some plugs and I had a big three-prong plug. I put it in a boiling pot of water on the stove and then I had some small ones did the same thing. I'll be doing it that way all the time. It works really good. I pulled everything out of them. Thank you for that little tip. 👍👍🙂🇨🇦

[@scrapitall200]

@@ipaddlemyowncanoe.7441 awesome! I prefer using the sun to heat them up since it’s free, but boiling them definitely works really well. Thank you for watching, I appreciate it. Hope you’re doing well!

[@henrryarias369]

Hi Mr scrappy last time we found a old 90’s office printer in a old shed that we demolished it took us 1 hours to to move it and 30 minutes taking apart , alotof plastic but they fun to play around with, mom say hi all here in North Carolina 😸❤️🇺🇸🇸🇻🌎🐭

[@scrapitall200]

Hi there, hope you and all are doing well. I don’t mind scrapping old printers, definitely a lot more stuff inside than newer ones.

[@golabrecykling]

Great job James. 🎉🎉 God bless you Brother 😊

[@scrapitall200]

@@golabrecykling hey brother, hope you’re doing well. Thank you so much. God bless you too 😃

[@jwall6006]

Another good video. God Bless you

[@scrapitall200]

Thank you! God bless. Hope you all are doing well.

[@24KGOLDRECOVERY]

Excellent video bro

[@scrapitall200]

@@24KGOLDRECOVERY thank you so much. I just subbed to you

[@josephcormier5974]

Excellent another awesome and enjoyable video with outstanding content thank you for sharing this with us six stars brother

[@scrapitall200]

@@josephcormier5974 thank you brother! Hope you’re doing well.

[@vw8796g35]

Thanksfor your video there is silver contact in the heat sensor from the heater!

[@scrapitall200]

Yeah I grab most contacts but those ones are especially small. Thank you!

[@scott-kf1bi]

Thanks for the scrap lesson on stuff.

[@scrapitall200]

You’re welcome. Thank you for watching!

[@Followerofchrist878]

Awesome video as usual brother.

[@scrapitall200]

Thank you brother

[@Followerofchrist878]

@@scrapitall200 welcome God bless

[@scrapitall200]

God bless you too 😁

[@scrapnjunk81]

Great video. Lots of good break downs.

[@scrapitall200]

@@scrapnjunk81 thank you buddy

[@scrapnjunk81]

@@scrapitall200 Your welcome

[@scrappingonthefly77]

Im sure glad you scrapped that alarm clock. I got tired of hittin the snooze button 😂.

[@scrapitall200]

🤣😂 that cracks me up brother. Worst invention EVER!!

[@ThatsRightRecycling]

@@scrappingonthefly77 🤣🤣✌️

[@scrapitall200]

Wake up Adam!!!!! 😂😂😂🤣

[@scrappingonthefly77]

@@scrapitall200 lol

[@scrappingonthefly77]

@@scrapitall200 heck no lol

[@alejandropipi]

Good Video!

[@scrapitall200]

@@alejandropipi thank you! 😃

[@empirefinds]

Awesome episode brother

[@scrapitall200]

Thank you brother! 😃

[@nicejunk666]

Awesome video my friend I am really glad I watched this, I like how you defined what was the big money in each

[@scrapitall200]

Thank you my friend! Probably all shred for you lol.

[@nicejunk666]

@@scrapitall200 no the wire comes off lol

[@scrapitall200]

@@nicejunk666 oh that’s right, wire is easy pickings lol

[@ScrappinLou]

I love BigStackD too. I'd love to do what he does but I live in a city and can't.

[@scrapitall200]

@@ScrappinLou he’s great!! Definitely looks like a lot of fun. Sorry to hear you’re not able to because of your location.

[@bearhardcorepicker]

Those red (and sometimes they are green) led alarm clocks do have some resalable value online, so when you get working ones, they are well worth trying to sell online. Might even be able to sell groups of non-working ones for parts or repair.

[@scrapitall200]

@@bearhardcorepicker really? That surprises me. I’ll have to look into that, thank you.

[@ScorpionMetals]

It all adds up for sure

[@scrapitall200]

That’s right 👍

[@cuetTimmonz]

takes time but if u have it, for sure. i have 2 full bags so far. plus copper pipes i have from old ac in the furnace, and unit.

[@ScorpionMetals]

@@cuetTimmonz heck yea

[@Wreck-Gar]

My mission this month is to get my bench as tidy as yours. It's currently about three feet deep in circuit boards, cable and items to strip down 😢

[@scrapitall200]

@@Wreck-Gar dang, that’s going to be quite the job lol. I love having a clean workbench

[@empirefinds]

Right best make a cup of tea for episode.

[@scrapitall200]

That’s right, time for a cuppa

[@donnussbaum4234]

Amen

[@scrapitall200]

@@donnussbaum4234 God bless you! Thank you for watching.

[@piecesofpete5921]

🤙🤙👍after being without power for8 1/2 days bout ready to scrap everything in here 🤪✌️

[@scrapitall200]

Wow! That’s rough for sure. 😢

[@Oldgrumpyvet67]

Awesome video, my wife is glad we don’t have any of those things in the house.

[@scrapitall200]

Thank you my friend! She glad cause if you did you’d scrap them? lol

[@Oldgrumpyvet67]

@@scrapitall200 I am currently trying to take apart 2 starters and an alternator. I am referring to your video for the alt.

[@scrapitall200]

@@Oldgrumpyvet67 ok cool! I actually have a starter sitting in my shop. I do plan on making a video of it soon.

[@Oldgrumpyvet67]

@@scrapitall200 yessss !!!!!! Thank you

[@scrapitall200]

@@Oldgrumpyvet67 won’t be next Saturday, but if everything pans out, it’ll be the following Saturday. Have a great week my friend.

[@richardroyles1423]

God bless

[@scrapitall200]

Thank you! God bless you too 😃

[@TheGforcead]

On your new method where you cut the transformer copper with a chisel, I use a shaving motion with metal blade in the sawzall and cut one side Also I wanted to tell you about Spyder sawzall yellow blades. They have teeth on both sides, but you know how a blade will loose it's initial razor sharpness, but still cut, those blades excell at this, I cut the bead (and rim) to get tires off rims, you can use the top side of the blade to start the hole cutting sidewall of the tire, that spring steel in tire beads is tough. I use the same shave technique on electric motors, I use a screwdriver to find the correct. Depth where to cut thru the side of the electric motor so My blade is beside copper wire slots. and cut the loop backs off one side, then you can use pry bar and pull copper wire out other side. Slides right out. Those Spyder metal cutting sawzall blades last and last! Cutting close to the side keeps the copper wire from frazzling out, it can get all fluffy and you don't want that if you can help it.

[@scrapitall200]

Oh cool, thank you for sharing that with me. I will have to look into the spyder blades! They sound really awesome.

[@TheGforcead]

@@scrapitall200 usually that miracle stuff is just a sales gimmick, I admit I bought them because teeth on top side too but their longevity sold me. And that's coming from someone who used the thick "Fire and rescue" blades. Fire and rescue are better for cutting catalytic converters because they are less likely to bend if you accidently hit something, car floor, trans Cross member ect. but for me. thinner blades have to move less metal and work better. Also my local yard will not buy loose converters, they have their own battery powered sawzall and only buys converters from whole cars when you sell them, and they want to cut them off. Not getting many cars so your videos are important, grams grow to lbs you are helping lots of folks. It breaks my heart to see someone sell a heat/a/c unit for shred. It's worth taking apart!

[@scrapitall200]

@@TheGforcead that’s good to know. Glad they aren’t just a gimmick. My yard will buy loose converters but only if there’s a title to go along with it. Which is a good idea, too many thieves. Absolutely, they are definitely worth scrapping, I hate seeing them in the shred pile. Thank you.

[@murlbailer3755]

Just as you mentioned the airplane there was a helicopter going over here. Hospital heliport is 1 1/2 blocks away.

[@scrapitall200]

Oh wow, crazy timing

[@murlbailer3755]

Myself as a micro scrapper I strip all the wire if possible 👍. ✌️

[@scrapitall200]

I try to strip most of it, especially now I have a wire stripper.

[@scrappingonthefly77]

Space heaters are one of the most dangerous heat sources to heat your home. I break them down even if they work lol..

[@scrapitall200]

Last year a family of 6 not very far from me lost their home due to a space heater catching fire.

[@cuetTimmonz]

i have about 60.00 so far collected, in a mix of copper.it's going for about 4.69 Canadian as of last week.. still more to strip out... so hope by Nov Dec, its up to 5.00 a lb. thanks for ur videos..

[@scrapitall200]

I’m hoping copper will go up again. $5/lb would be amazing. Thank you for watching!

[@scrappingonthefly77]

Isn't it crazy how hard that little motor blows so hard in the hair dryer? Lol

[@scrapitall200]

🤣🤣 it definitely blows lol

[@ProductionsLightMike]

James, where do you live? I wish it was really cold where I am ! I live about 15 miles from Salvaging in Arizona, and it's supposed to be a high of 109 F° today! 🤒

[@scrapitall200]

@@ProductionsLightMike wow, that is way too hot. I live in Washington state.

[@Eaglemadhatter]

I don't have a garage but side of my house is full and city is complaining. Turning my bedroom into a workshop for smaller metals and will just run the shred as is. I have mowers chainsaws edgers hairdryer etcetc etc to tear down

[@scrapitall200]

@@Eaglemadhatter wow sounds like you have a lot of stuff. Sorry to hear the city is complaining.

[@pociecha-ub3et]

Pozdrawiamy z Polski o oglądamy !

[@scrapitall200]

Thank you my friend!

[@Duncanorcant]

Hi @scrapitall200 I have about 100 Westinghouse Lightbulds (energy saver) from 2003-06. When I broke them down, they all contain giant rolls of what I think is copper??? How can I be sure? I've done the "scratch test" and I'm still unsure.

[@scrapitall200]

@@Duncanorcant hi! Are they non magnetic? Does it have a orange-ish color to it? If yes to both, then definitely copper. If it looks like bright silver color, then aluminum. I’ve never done any of those, so I can’t speak from experience. Another way to test is to weigh it. If it’s aluminum it’s going to be super light for its size.

[@Duncanorcant]

@@scrapitall200 Yes, they are non-magnetic and brightly orange. I'll post a picture for you to see. Thank you so much for responding!

[@scrapitall200]

@@Duncanorcant that’s definitely copper! Unfortunately you can’t post pictures here. You’re welcome

[@leocorneillier1996]

😎👍👍👍❤️

[@scrapitall200]

Thank you buddy! Hope you’re doing well

[@ThatsRightRecycling]

Hey Y'all ✌️

[@scrapitall200]

Hey there 👍✌️

[@козачук1977]

👍🤝🤝🤝🇺🇦 Удачі і мирного неба над головою.

[@scrapitall200]

Thank you my friend. Stay safe! ✌️🙏👍

[@Jdrf73]

Ive missed plenty of screws scrapping im like how many screws are there 😅

[@scrapitall200]

🤣 I’ve said those exact words myself

[@billd7829]

I was wondering if u have ever taken a hard drive apart.. I recently took one apart and I was wondering what the metal is inside or if it is aluminum or something. Because I read somewhere that it's not aluminum and it is not metal.. the outside part os definitely aluminum but the discs on the inside and other parts I'd like to know what they are..

[@scrapitall200]

I do have a video taking one apart. They are typically going to be aluminum coated in palladium, I believe it is. Newer ones are sometimes ceramic.

[@billd7829]

@@scrapitall200 okay thanks for the quick reply back. I appreciate u thank u..

[@scrapitall200]

@@billd7829 you’re very welcome!

[@patrickwilliams4613]

Was rhere not a brass spingle on the dvd player unusual

[@scrapitall200]

It did not!

[@patrickwilliams4613]

I took apart contact switches tonight on my video I gave ypu a mention hope it's OK

[@scrapitall200]

@@patrickwilliams4613 thank you very much, I definitely appreciate that buddy!

[@tristanberecz8024]

hey how u been u gonna start melting metals i see i want u do a crt tv video breakdown

[@scrapitall200]

I am doing well. How are you? I’m hoping by next summer I’ll be melting metals. I don’t find crt tvs often, but next time I get one I will make a video. I do have a video showing how I scrap the yokes.

[@HHRecycling]

Bonjour from Canada

[@scrapitall200]

Hello from USA lol. Hey buddy

[@cuetTimmonz]

annin. hey, from TORONTO.

[@HHRecycling]

@@cuetTimmonz hi from northern BC. I grew up near TO though. North of Cobourg

[@vw8796g35]

Im from Montréal Quebec:)

[@HHRecycling]

@vw8796g35 nice! I got hit by a car in Montreal when we were on a school trip.

[@cuetTimmonz]

is aluminum or tinfoil pans,scrapable? u know when u have a bbq, and use those pans?

[@scrapitall200]

Yes, my yard will buy them as old sheet aluminum, as long as they aren’t really messy from food scraps and such.

[@patrickwilliams4613]

What price are your electric motor mine is 50 cents a kilo they were 60 cents they will go up again easy keep bucket stacked up great video as usual thanks you micro scrap and i micro micro micro scrap

[@scrapitall200]

25 cents a pound which is .45 of a kilo. That’s right my friend, all about micro scrapping. I love it. 😃

[@patrickwilliams4613]

@@scrapitall200 good they add up big time

[@scrapitall200]

@@patrickwilliams4613 absolutely! You definitely know with all the micro scrapping you do too. 😃

[@richavic4520]

Don't close your eyes in prayer while driving Just a reminder

[@scrapitall200]

@@richavic4520 definitely not 🤣

[@WestynVR2.0]

Hi love ur videos when u send things to boardsort can I make much profit in doing that if u could respond would love to hear from u

[@scrapitall200]

Thank you. Absolutely, there is really good money in selling to Boardsort. Just check out their website and I have a couple videos on selling to Boardsort and other related videos.

[@smitchlego]

hello

[@scrapitall200]

Hello buddy

[@patrickwilliams4613]

My yard dont take dirty brass its shred i have made a video tonight how i clean my dirty brass to clean brass

[@scrapitall200]

That’s unfortunate. There are certain things I do not find fun to make clean, so it’s nice having the option to sell as dirty brass.

[@nicejunk666]

Wires don’t burn down wires. Angry ex wives do 😂

[@scrapitall200]

@@nicejunk666 speaking from experience 🤣

[@nicejunk666]

@@scrapitall200 maybe 🤣

[@scrapitall200]

@@nicejunk666 🤣😂

[@patrickwilliams4613]

All my aluminium is all the same price no matter what type it is

[@scrapitall200]

Yeah I’ve heard that from Irish before and the folks in the Uk

[@HHRecycling]

How are you going to wake up in the morning, now?

[@scrapitall200]

Dang it, I did not think this through 🤣

[@Ezraknapp-qi2sr]

Actually the plastic is recyclable

[@scrapitall200]

Not where I live unfortunately!

[@pociecha-ub3et]

Ciekaw jestem które zwierzę ci się podoba słoń czy osioł ?

[@scrapitall200]

I don’t talk politics.

[@pociecha-ub3et]

@@scrapitall200 Szkoda . My Polacy jesteśmy narodem który chętnie o polityce rozmawia . Wynika to z naszej bardzo trudnej historii i położenia geograficznego. Moja córka wraz z narzeczonym za twa tygodnie będą w Nowym Jorku . Wcześniej byli na Florydzie .. Pozdrawiam !

[@scrapitall200]

@@pociecha-ub3etI hope they have a wonderful time 😃 Yeah, I’m very familiar with your history, but here you are still standing strong. 😁

[@geoffbrown8748]

PRAYERS FOR ALL THOSE EFFECTED BY THE STORM ! GOD HELP YOUS WITH THAT CLOWN BIDEN... NORTHERN IRELAND

[@scrapitall200]

@@geoffbrown8748 God bless! Thank you for watching. Hope things are going well for you and Northern Ireland.

[@scrappingonthefly77]

I never have grinder coffee.. Don't think I want to now that i seen that Black ivory coffee beans are eaten by elephants then the beans picked from their poop and processed .. lol nope not for me !! Bye Bye Coffee grinder !! Lol

[@scrapitall200]

There’s another type of coffee bean eaten from an animal then pooped out. Collected (hopefully cleaned 😂) it’s like a lemur or something like that. No thanks 🤣

[@scrappingonthefly77]

@@scrapitall200 lol 🤮🤮

[@scrapitall200]

Right!? 😂

[@jwall6006]

Kopi Luwak is the most expensive coffee in the world. They’re partially digested coffee beans eaten first by a palm civet. It’s in the cat family. The good news is I’ll never be able to afford a cup so no fear of getting it by mistake. lol

[@scrapitall200]

Ok cool, thank you. I don’t think I’ll have to worry about drinking that stuff lol

[@donscottvansandt4139]

Great video! I came over from BigStackD . But I am about to start doing what you do with a little melting as well.

[@scrapitall200]

@@donscottvansandt4139 thank you! Oh cool, I really enjoy his videos! Thank you for being here. Very cool, looks like fun to me, melting some scrap and making cool pieces!

[@pociecha-ub3et]

Zasubskrybowano kanał !

[@scrapitall200]

Thank you so much!! 😁

[@hubertyoung6940]

Amen

[@scrapitall200]

God bless!