How to make PCB using MARKER PEN (Printed Circuit Board)

[@walikai]

to prevent having to do this more than once because of bad alignment/proportions from copying by eye: 1. Punch a small hole in each drill location 2. Tape the paper to the board 3. Poke the marker through the paper to the copper board 4. Complete the connections with the marker

[@aliismael3869]

Loved the music more than the video !

[@aryansinghania2163]

dude you used gloves for drawing but did the chemicals work bare handed

[@tayyabashfaq3939]

whatsoever, have a look at final product and him .. both are fine :D :D

[@swyntopia]

I did it several times this way and it works ! I use waterproof permanent markers, no matter what brand. And I suggest to drill the holes AFTER etching, not before drawing ! This method is absolutely sufficient for 1/10 " spacing, but for SMD ? No, I would avoid it for SMD. It´s simple, it´s cheap, and you can do it at home. ( Even on the dining table ! ) Remove the ink after etching with thinner.

[@SeaJay_Oceans]

Amazing. You can build your own computer or robot using household supplies ! Brilliant !

[@ghpk]

nice work, very unique, but you forgot about safety and you are touching "ferric chloride" by bare hands this is Dangerous for sure. please do not try this again, and you must alert the viewers too, there may be a innocent trying that without knowing the damage it can cause,.

[@raypsi1]

I've been touching ferric chloride for 40 sum yrs. I'm still alive and kicking If it were dangerous how come I'm still alive? It's the chloride fumes which is a gas that you can't touch, that you got to worry about. And they can't ship ferric chloride by airplane 'cause it can eat through the airplane body if spilled. Lucky your body isn't aluminum.

[@amitpatelpatel144]

HA ha

[@justtalks1074]

I too do all this bare handed

[@Laughin9M4N]

nice, the music reminds me of the terminator theme

[@MayMcDonough]

This was cool. Nice to know it can be that simple if I want it to be. I think I'll stick to transfers though. I don't trust myself to heavy a steady hand.

[@aravinthanarul2420]

Tabula

[@ashokkumarmallick]

Excellent .. thas Magical Science..

[@PauloConstantino167]

SO GOOD! AMAZING. THANKS FOR SHARING !!!!

[@hobokengar]

That was rather amazing ! Good Job, I will try it...but with gloves. :-)

[@RichardOkeny-t3x]

nice and easy

[@tqipcbassembly431]

What a clever idea. But I agree with the others. You gotta be careful with the chemicals as they can do some pretty serious damage.

[@Berghiker]

Another tip. Pour some acetone into a small square container then just put the PCB into it. All the ink will just come off quickly.

[@vikingsofvintageaudio7470]

Thanks mate!

[@420Sumanta]

Are you using the 15Rs CD/DVD/OHP markers from fabre castle?

[@iconca]

nice video.

[@princegautam8504]

thanks for this trick

[@betanapallisandeepra]

nice....and thank for upload.....

[@raypsi1]

I can attest to sharpie marker pens, don't work so well, especially on 2 oz copper boards. and put the foil side down in the etchent, etches a lot faster. I have no idea why, just does etch faster. Great job thanks for sharing merci beaucoupe

[@walikai]

N8ZU I have used sharpie's "super permanent ink" type and they work great.

[@raypsi1]

walikai merci beaucoupe for the information

[@DanielRichards644]

+N8ZU We used Sharpies and sanded the sharpie off after etching when I did this stuff in highschool 12-13 years ago, worked fine as long as the traces where wide enough and heavy enough

[@MultiTom1956]

Good job !no need of peel n stick blue transfer paper:-) Thanks

[@ArvinTorrente]

Good video thanks!

[@nikeshpun4975]

what is that board made up of is it completly cooper??? and how much thickness should it be?? and importantly where can i find circuit board design for anything

[@nikeshpun4975]

thanks for advice

[@katunayakasinhalaya5065]

hi everyone ,if anyone else wants to uncover understanding electronics components try Awsomic Electronics Builder (Have a quick look on google cant remember the place now)? Ive heard some incredible things about it and my mate got great results with it.

[@mrbrittas3254]

just get a copper pen, pcb pen, its a marker that draws coppers lines onto a pcb, we used them 30 years ago in school

[@markfuertes8052]

can you make an obstacle sensor using that pcb board sir??

[@pappugupta9914]

sir aap tejab aur pani uj kiye hai uska name kiya hai aur sir ye saman kha se mile GA

[@swedensy]

I can no hear cause i am like that from my bearthday, can you plese write in description what do i have to buy to make it?

[@m.a.kaderjibon5709]

super

[@pradipselectrolab2994]

what the extra ordinary things you show?

[@ikentfix]

Whats that board do you use?

[@s.mitrarohtak5800]

Please help me to get the pen requirements clearly

[@Berghiker]

Why don"t you just add some HCL to the ferric chloride solution to make it stronger? It works faster. Then you don't need to add hot water.

[@ChristGood-sr9he]

where is a available this acid

[@acorgiwithacrown467]

do they actually work?

[@shereef131]

ممتاز

[@janellburgett6280]

that is koll

[@andrasszasz4373]

Hello , i made few PCB with marker i used "edding 141F" one buyed as "ferric chloride" resistant but it's not so resistant i had dissolved lines , etc ... I see that your one look's very cool , can i know what company produced that marker ?

[@lillymayble5404]

You should've used a prolifix rubber to remove the marker and that way the PCB would A. Been easier to be cleaned and B. There wouldn't have been any blue staining. Good video otherwise

[@robinrwilsonsauls]

Can you go over the Diagram with Graphite, and then Permanent Marker. The Graphite should help.

[@robinrwilsonsauls]

OOOOOOOOOOOHHHHHHHHHHHHHHHHHHHHHHHHHH why, why, why must you guys stop talking. and play that gawd awful noise. I want/need you to stop doing real "cool" videoing and teach. You were pointing to description writing on the pen, (what)???? Are you saying certain pens work, and certain pens won't????? I think your brilliant-but I want to learn that brilliance for my self!!

[@faizanshakil6453]

lol .water was so hot that it melted the plastic.

[@ericpadilla4999]

He was wearing gloves while writing wit a permanent marker.. But has no gloves on while pouring the acid ...🤦🤦🤦

[@jpmorgan187]

music by?

[@pjynah6397]

Is any type of marker can I use?

[@objectionform]

The marker he is using is a Faber-Castell Permanent Marker 1585-99, Bullet Tip

[@brdc100]

good22222

[@binness]

Turn the bloody music off, I don't mind silent movies, what I hate is other peoples music selection.

[@theeltea]

There is a mute button. Use it.

[@andriikhloponin6173]

hey ,if anyone else is searching for how to make basic electronic circuits try Elumpa Circuits Expert Alchemist (do a search on google ) ? Ive heard some awesome things about it and my cousin got great results with it.

[@janellburgett6280]

Janell

[@sameetasapkota5297]

interesting points ,if anyone else is searching for understanding electronics basics try Awsomic Electronics Builder (just google it)? Ive heard some decent things about it and my work buddy got amazing success with it.