Thanks for coming by and checking this out. Was a lot of fun, and not as hard as it looks!
@allymac682 жыл бұрын
great tut fella.....Ive been messing with moulding toolpaths & some of your tips came in VERY handy, esp the cut in half aspect - so you can see the profile prior to cutting...Kudos!
@TradeSkillersAnonymous2 жыл бұрын
@@allymac68 thanks and I’m glad you found it useful. Do t forget to hit that subscribe button while you’re here!
@danielray65742 жыл бұрын
Thank you!
@TradeSkillersAnonymous2 жыл бұрын
@@danielray6574 thank you Dan, and hit that subscribe button if you’re inclined!
@chrisnack Жыл бұрын
wow, GOLD, you might have saved me buying $1500 in custom cutters to match our existing kitchen cabinets
@TradeSkillersAnonymous Жыл бұрын
I think the thing I like most about woodworking, is finding different solutions to new challenges. And yes, good quality raised panel cutters are expensive! If you liked this, please consider subscribing! Thanks and have a great day!
@willsnow9995 ай бұрын
Great video - was looking for this type of solution - I'm thinking of making some windows (basement) for an old house using similar techniques
@TradeSkillersAnonymous5 ай бұрын
Hey there, glad it was helpful! Consider subscribing if you like while you're here!
@dangoras91522 жыл бұрын
Good information... Well explained keep it up brother im just learning....
@TradeSkillersAnonymous2 жыл бұрын
Thanks Dan, we’re all just learning! Feel free to subscribe if you haven’t yet (can’t tell who is or isn’t). Thanks and have a great day!
@DaveGatton2 жыл бұрын
Wow! The coffee hutch looks fantastic and you did a great job of explaining how to use that molding toolpath. Very well done my friend. 👍🏻
@TradeSkillersAnonymous2 жыл бұрын
Hey Dave, thanks. Love making serial number 1 of 1 !
@richswirsding1349 Жыл бұрын
I'd like to try this. Did you have any warpage issues because all material was removed from one side of the panel?
@TradeSkillersAnonymous Жыл бұрын
Hi Rich, no warping, used quarter sawn oak for reference. Thanks and please consider subscribing while you’re here to see more. Thanks and have a great day!
@resorter662 жыл бұрын
This looks like a very easy way to make a raised panel door Would you share or sell me the file you created the file you did to make the Door. I also use the vectric software. also could the file you made be resized to make different size doors.? Thanks Jeff Peters
@TradeSkillersAnonymous2 жыл бұрын
Hi Jeff, thanks for checking it out. Per your request I added the file that I created to my store, link right below here. tradeskillersanonymous.com/shop Consider subscribing, and be on the lookout for more/other videos. Thanks!
@jwar21632 жыл бұрын
Did you use a solid piece of hardwood? Or did you do multiple glue up to get to the rough size then mill the board(s) down? Curious because my experience is that large single boards have a tendency to warp and crack over time opposed to glue up for raised panels. I just purchased a Longmill MK2 and I am hoping to one day use my cnc for cabinetry.
@TradeSkillersAnonymous2 жыл бұрын
Hey there! The larger cabinet doors were glue ups of 3” stock. The three small drawer fronts which were about 6” tall, 6” wide were one piece of stock. Due to their small dimensions I think they’ll be fine. These were all made with quarter sawn white oak, which is less prone to movement.
@jwar21632 жыл бұрын
@@TradeSkillersAnonymous Thank you for the reply I too like the white oak hard to get here where I live.
@MILAD.VAHDAT3 ай бұрын
perfectly explained ,thanks
@TradeSkillersAnonymous3 ай бұрын
Glad it was helpful!
@kevinlemoi7837 Жыл бұрын
Great Video.... how long did it take to cut the larger panel?
@TradeSkillersAnonymous Жыл бұрын
Hi Kevin, it’s been about a year, but I believe the large doors were under an hour, and what i do remember is purposely going slower than usual. Thanks for watching, and id invite you to subscribe while your here. Thanks and have a great day!
@KofiOwusu-Acheaw-ny7xr7 ай бұрын
Hi thanks for great job done , my question is I've been following you on this particular job step by step but my machine i only able to make the roughing part if I try to do the finishing the machine tell me there is nothing in the 3D to work on what do I do? Thanks
@TradeSkillersAnonymous7 ай бұрын
What software are you using, and what bits?
@KofiOwusu-Acheaw-ny7xr7 ай бұрын
Thanks though for prompt reply I've been able to rectify it I'm using vectric aspire
@codarussell7925 Жыл бұрын
Is this file available or are you willing to share it?
@TradeSkillersAnonymous Жыл бұрын
Hi there, and thanks for watching. Tutorial file for this panel available here: tradeskillersanonymous.com/shop
@nomadrenegade8 ай бұрын
truthfully, how long to carve one door?
@TradeSkillersAnonymous8 ай бұрын
It’s been a good while since I did this, but I’d guess 30-40 minutes? I tend to use very little step over with the ball nose to avoid sanding
@Bitcoincarpenter2 жыл бұрын
Great job can you show how you get a sharp corner in the vector
@TradeSkillersAnonymous2 жыл бұрын
Hi Andrew DAgostino , Thanks for taking the time to view, and comment I really do appreciate it. By using a small enough tapered end mill, the corners came out sharp enough for my needs. Also, checked the box in Vcarve Pro to create sharp corners. If you haven't had a chance yet, and are willing, I'd love to ask you to subscribe in order to help me get the word out to more people who might be interested. Thanks again and have a great day!
@RICOFURNITURE7 ай бұрын
Hi and thank you for great tutorial .
@TradeSkillersAnonymous7 ай бұрын
Thanks for watching, glad it was helpful. I invite you to subscribe if you haven't already if you are inclined. Thanks and have a great day!
@RickSwartwood2 жыл бұрын
Well done! Subscribed to "ALL"
@TradeSkillersAnonymous2 жыл бұрын
Thanks for checking it out Rick, and for subscribing. Appreciate that very much. Hope you have a great day!
@Onlyindianpj Жыл бұрын
Wow Diamond Thank you for teaching
@TradeSkillersAnonymous Жыл бұрын
Thanks, glad you liked it!
@keithlamb3242 жыл бұрын
Nicely done JR, excellent & clear explanation of how to use a moulding tool path!
@TradeSkillersAnonymous2 жыл бұрын
Thanks Keith! Hope you’re well!
@hob976 Жыл бұрын
Awesome! Did your bit run "climb" or "conventional"...? Is there a rule of thumb for that?
@TradeSkillersAnonymous Жыл бұрын
Hi hob, appreciate you watching and commenting. I ran it both ways and didn't find in this application that it made any difference. This was 1/4 sawn white oak for reference. If you feel like I've earned it, I'd ask you to hit subscribe while you're here. It'd help me grow my young channel's reach and I'd sure appreciate it! thanks again!
@hob976 Жыл бұрын
@@TradeSkillersAnonymous Subscribed!
@marekjakabek51882 жыл бұрын
Great video thank you for taking the time to post
@TradeSkillersAnonymous2 жыл бұрын
My pleasure, glad it was helpful/informative. I’d invite you to subscribe if interested in seeing more/future videos. Thanks again, have a great day!
@NatchurlBorne2 жыл бұрын
I'm new to the CNC router world but am learning so much from great folks like you. I am running VCarve Pro 5.5 right now (it's what I inherited when I took over the shop I took over) and definitely need to upgrade. Hopefully the Techno machine it's attached to is up to the task. Again, just a newb here so I don't know what it's capable of. Thanks for the content.
@TradeSkillersAnonymous2 жыл бұрын
It’s a fun world, so many routes to go! Thanks for watching, commenting and hopefully you subscribed while you were here! Much appreciated, have a great day!
@geffreymburu48392 жыл бұрын
Very very nice salute bro
@TradeSkillersAnonymous2 жыл бұрын
Thanks Geffrey!
@uther102 жыл бұрын
Great looking product and informative video!
@TradeSkillersAnonymous2 жыл бұрын
Thanks Uther, glad you liked it. Hopefully to took the opportunity to subscribe and such, so you’ll see future videos! Thanks again!
@bigeasy_f1502 ай бұрын
what bits did you use
@TradeSkillersAnonymous2 ай бұрын
Hi Big Easy, I used two for the fluting, mainly just to see what would work best. A 1/4 and 1/8 tapered ball nose bit. Both worked well, the 1/4" was considerably faster and no real difference in finish. Feel fee to subscribe if you haven't already!
@southernmanC2 жыл бұрын
Liked and very useful
@TradeSkillersAnonymous2 жыл бұрын
Thanks for watching and your nice comment, If you’re inclined, feel free to subscribe to see more!
@williamreese911229 күн бұрын
Thank you so much for this video. I followed your example exactly, except I resized the door to what I need. Worked as advertised in Vcarve. I put on my CNC and worked perfectly. Except we didn’t like the profile, yes, I know it was only an example. I found a profile I liked which included beading detail on the rails and stiles. Carved a sample in MDF this morning and again, it worked fine. Thank you again for the instructions.
@TradeSkillersAnonymous28 күн бұрын
Glad it helped! Please consider subscribing while you’re here if you found what I share to be useful.
@janetpersons8030 Жыл бұрын
What bits did you use
@TradeSkillersAnonymous Жыл бұрын
Aside from the 1/4" end mill to cut profiles, I used a 1.4" tapered ball nose that i bought from my favorite bit supplier, cadencemfgdesign.com
@douglassmith20552 жыл бұрын
Thanks JR for another great craftsman video. Always enjoy your content. This was very informative, and just shows what a great investment the cnc woodworking router can be in the shop.
@TradeSkillersAnonymous2 жыл бұрын
Thanks, I’m glad you liked it Douglas. Thanks for checking it out, and yes because I had the machine, didn’t need to buy any raised panel router bits! And it was fun to figure out = )
@thanhnhanhuynhnguyen36522 жыл бұрын
Thanks a lot!
@TradeSkillersAnonymous2 жыл бұрын
Very welcome!
@jessefoulk2 жыл бұрын
Oh that's a cool feature
@TradeSkillersAnonymous2 жыл бұрын
Hey Jesse, yes sir, lots of doors open with a CNC and a little creativity! Thanks for coming by, feel free to subscribe if you haven’t yet. Thanks!
@MarkLindsayCNC2 жыл бұрын
Nicely done, JR! That hutch looks awesome!
@TradeSkillersAnonymous2 жыл бұрын
Thanks Mark!
@guybartlett95872 жыл бұрын
Subbed
@TradeSkillersAnonymous2 жыл бұрын
Thanks guy much appreciated!
@GeeTheBuilder8 ай бұрын
Hi from the 🇬🇧UK 👋 The video is PERFECT for what I am looking for. It’s exactly what I wanted to help me start with drawer fronts. I’ve just built my own kitchen except the drawer fronts. And I am also getting in to CNC I had no idea the software could take a profile like that and simply apply it to a rectangle shape. Very clever. You’ve saved me so much time 🙏
@TradeSkillersAnonymous8 ай бұрын
Hi Graham, so glad it was helpful! Best of luck with your kitchen! Thanks for checking it out, and if you'd like I invite you to subscribe while you're here!
@sambailey95402 жыл бұрын
I duplicated a missing panel for a lady's antique heirloom buffet. I wish I could attach a picture because it got a little involved and I don't know how someone would duplicate it without a CNC.
@TradeSkillersAnonymous2 жыл бұрын
Man that’s a great example! Giving someone back an antique, probably meant a lot to her, great job! Hit subscribe for more to come if you haven’t yet! Have an awesome day!
@voiceofintelligence Жыл бұрын
Nicely done. I'm using the Onefinity with Vectric Aspire, but I'm not coming close to realizing their potential. Learning new stuff all the time.
@TradeSkillersAnonymous Жыл бұрын
Been wood working a long time, in the CNC world for a shade under two years. This area has so many learning points for me, I love it! Thanks for watching, and maybe consider subscribing while your here, I’d appreciate having you along !
@John-xo3cv Жыл бұрын
I’ve been focusing on inlay work with a Shapeoko Pro but this might have to be my next obsession.
@TradeSkillersAnonymous Жыл бұрын
So many ways to go, shapes and even textures. Thanks for watching!
@connorbramel7368 Жыл бұрын
Awsome video! Will be using this method myself! Thank you!
@TradeSkillersAnonymous Жыл бұрын
Hi Connor, glad you found it helpful. Please consider subscribing while you’re here !
@ayoubkenitra850510 ай бұрын
Respect au maroc
@TradeSkillersAnonymous10 ай бұрын
Thank you for watching and your comment. I’d like to invite you to subscribe while you’re here if you’d like. Again, thank you and have a great day!
@acerjuglans3832 жыл бұрын
Very interesting using the molding toolpath. I've just learned how to Vcarve an MDF cabinet door, using a 90°V bit for the "rails and stiles", and a 120°V bit for the "panel". The advantage of this is getting as close to sharp inside corners as possible.
@TradeSkillersAnonymous2 жыл бұрын
hi Acer, yeah i thought it was a cool way to use the machine and enjoyed figuring it out!
@RuffKutmedia Жыл бұрын
Great video, thank you so much for sharing I will be purchasing this file.
@TradeSkillersAnonymous Жыл бұрын
Glad you found it useful, I really enjoyed this project! Consider subscribing to catch future videos!
@richiemag222 жыл бұрын
Great video, how do you get square inside corners? I am using Aspire 9.7
@TradeSkillersAnonymous2 жыл бұрын
Hi Richie, short answer is the method I used doesn’t produce true sharp inside corners. Long answer is, I used a 1/16 tapered ball nose from cadencemfgdesign (Cody’s cnc on Facebook). Because the bit is such a small radius, they appear very close to sharp
@EricGauthier19862 жыл бұрын
Great video. I appreciate getting a look at some of the slightly more advanced features in V-Carve. I'm mostly using Carveco at the moment but I did find V-Carve to be pretty intuitive when I used it.
@TradeSkillersAnonymous2 жыл бұрын
Hi Eric, appreciate you watching and commenting. Its my pleasure and Im glad it was helpful to see. If you feel like I've earned it, I'd ask you to hit subscribe while you're here. It'd help me grow my young channel's reach and I'd sure appreciate it! thanks again!
@DResin8 Жыл бұрын
Another technique to add to my toolbox...thanks for the info and not putting me to sleep!
@TradeSkillersAnonymous Жыл бұрын
Thanks d towns, Subscribe while you’re here if you like, I’d appreciate it!
@joehanika Жыл бұрын
I love seeing this type of problem solving with modern tools mixed with traditional work!
@TradeSkillersAnonymous Жыл бұрын
I think the thing I like most about woodworking, is finding different solutions to new challenges. If you liked this, please consider subscribing! Thanks and have a great day!
@bcole2952 жыл бұрын
Ordered mine today and will be viewing your videos very soon. Im excited and thank you
@TradeSkillersAnonymous2 жыл бұрын
That’s awesome, you’re really going to enjoy it!
@woodworking8782 жыл бұрын
I spent an hour looking for a video that did exactly what you just demonstrated. Thanks for making it!
@TradeSkillersAnonymous2 жыл бұрын
Hey there, thanks for watching and commenting. Consider subscribing while you’re here!
@andrewderrick64902 жыл бұрын
Thanks. I'm new to vcarve and certainly learnt a lot from this. Great job.
@TradeSkillersAnonymous2 жыл бұрын
Thanks Andrew, feel free to subscribe to see more / new videos! Thanks and have a great day!
@BigHWorks2 жыл бұрын
Great piece of furniture JR! I really appreciate the video on how you are using the CNC to augment your workflow in your well equipped shop. I have a shaper and raised panel shapers bits but find it is a pain to set it up for a small job. I am looking forward to giving this technique a go. The video is very well done and full of VCarve tips and tricks, thanks.
@TradeSkillersAnonymous2 жыл бұрын
Thank you Alan, had fun making this one!
@belehautomotive4422 жыл бұрын
As a newbie to cnc router this video was a lot of help thank you verymuch
@TradeSkillersAnonymous2 жыл бұрын
Awesome, glad to hear it! Please subscribe, it’s free, helps me grow the channel and makes you feel good!
@davekolp45522 жыл бұрын
Great job, very good insight. Thanks
@TradeSkillersAnonymous2 жыл бұрын
Thanks Dave, if you’d like to see more or future topics, please feel free to subscribe while you’re here! Thanks and have a great day!
@tomsears2471 Жыл бұрын
Video was great. Thank you for sharing this.
@TradeSkillersAnonymous Жыл бұрын
Thanks very much Tom! Glad it was helpful. If you haven't already, maybe consider subscribing so you might catch future videos. Thanks again!
@kennyhebert8731 Жыл бұрын
Thanks for sharing, I am making a switch from plasma over to router at the moment and will have my cnc router built within the month. All DIY Im not done building and my wife has already asked for something like this for our home.
@TradeSkillersAnonymous Жыл бұрын
I had a lot of fun doing it this way, good luck to you! Consider subscribing while you’re here to help me get the word out? Thanks!
@kennyhebert8731 Жыл бұрын
@@TradeSkillersAnonymous Absolutely, I like your videos. You teach in a way all can understand
@laynemimstx2 жыл бұрын
great job as always. making the hard really simple. can't beat it.
@TradeSkillersAnonymous2 жыл бұрын
Thanks Layne!
@timshort3220 Жыл бұрын
It would be cool to carve the depth of a matching veneer or thin wood to glue in for the rails
@TradeSkillersAnonymous Жыл бұрын
Hey Tim! That’s a cool idea! Would you Consider subscribing while you’re here to help me get the word out? Thanks!
@MrKtmstu2 жыл бұрын
great video thank you, I'll have to give this a try!
@TradeSkillersAnonymous2 жыл бұрын
Was fun, I liked it. Thanks again Stu
@ronnorris15042 жыл бұрын
Thanks for the very informative and skilled video.
@TradeSkillersAnonymous2 жыл бұрын
Hi Ron, thanks for checking it out! Feel free to subscribe if you haven’t yet! Thanks again, have a great day!
@janetpersons8030 Жыл бұрын
This was a great demonstration lot learned.
@TradeSkillersAnonymous Жыл бұрын
Thanks so much Janet, glad it helped. Thanks for watching and commenting, please feel free to subscribe while you're here, I'd appreciate it!
@sparky4941128 ай бұрын
I wish this was in HD. Very hard to see. Thanks for the video regardless
@TradeSkillersAnonymous8 ай бұрын
Sorry about that
@sparky4941128 ай бұрын
No biggy! I'm getting old, which ruins my eyes and makes me cranky! Great video nonetheless. @@TradeSkillersAnonymous
@BJHermsen2 жыл бұрын
Like the concept and with quartersawn white oat you likely have the stability but as a purist I would have used this for the panel and still made rails and styles on the table saw
@TradeSkillersAnonymous2 жыл бұрын
Hey there, definitely more than one way to skin that cat! I’m hoping that because I ripped the oak into 3” wide strips and glued up, and that qtr sawn is much more stable than flat sawn that I won’t have any issues. Thanks for watching!
@carlslater74922 жыл бұрын
Interesting comment ... "purist" ... I might say "traditionalist" .... he did say in the beginning of the video he wanted a consistent grain direction as a design feature, he would lose that in the traditional build. I would also think his door would be stronger than the traditional build because it has longer and likely fewer joints ( yes I agree traditional has been strong enough) .... Let's just say this is something I struggle with "traditional" vs "new fangled". What I would be interested in is time to create for the different methods.... that is the deciding factor for me..oh and chance of me doing an "ah crap" moment
@michaela41412 жыл бұрын
Great video! I do have a few questions.. On the large door say the profile size used in the moulding is 2" wide x .5" height. That looks great. Now on the drawer fronts; A) what did you use for the inward offset? and B) what is the width and height of the moulding profile? I tried a 1" offset, and changed the moulding profile to 1'' x .5''. That just looked a little weird to me. I then tried 1" x .25" that looks a little better on the drawer fronts. I'm curious what your offset and profile sizes are.
@TradeSkillersAnonymous2 жыл бұрын
Hi Michael A , Thanks for taking the time to view, and comment I really do appreciate it. So, it really depends on the overall size of the drawer or cabinet door you are working on. It completely depends on the look youre going for and the aesthetics relating to proportion. In the video, Im really showing an example, and not the actual door because it didn't dawn on me to cover this in a video until I was at the end of this project. In the example, I used a (roughly appropriate size) cabinet door with 2" stile and rail appearance. In that example, I used a 2" profile just to have some symmetry in the design. These can be ANY size you want them to be. Some may prefer a beefier stile and rail look, while others may need to slim that down. If you look closely at the doors versus the drawer fronts, they do not have the same width stile and rail because in the case of the much smaller drawer fronts, a 2" design would've been too heavy for the size of the drawer fronts. At the end of the day, if it looks good to you (and or the customer), then it's a success. If you haven't had a chance yet, and are willing, I'd love to ask you to subscribe in order to help me get the word out to more people who might be interested. Thanks again and have a great day!
@michaela41412 жыл бұрын
@@TradeSkillersAnonymous thank you for the quick reply. Yeah, I was asking how much smaller you went with on the stiles and rails for the drawers. And how deep? 2" is definitely too heavy.
@TradeSkillersAnonymous2 жыл бұрын
@@michaela4141 oh sorry, for the drawers it was a one inch rail and stile, the max depth of the carve making up the profile was .500, leaving .250 at the thinnest point.
@MrLocke-bk3om Жыл бұрын
Wow. This sold me on the onefinity
@TradeSkillersAnonymous Жыл бұрын
Hey there Mr. Locke, thanks for checking out this video and your comment. @onefinity has been a great machine, and company I'm completely satisfied with everything about it. Consider subscribing while you're here, more videos coming shortly! Thanks!
@shanethomas3232 жыл бұрын
Awsome video! Thanks for the tutorial.
@TradeSkillersAnonymous2 жыл бұрын
Thanks Shane, appreciate that. Please consider hitting the subscribe button!
@shanethomas3232 жыл бұрын
You bet, I thought I had
@justmusing2569 Жыл бұрын
Super Hutch and great video. The learning never ends!
@TradeSkillersAnonymous Жыл бұрын
Hi JustMusing , Thanks for taking the time to view, and comment I really do appreciate it. If you haven't had a chance yet, and are willing, I'd love to ask you to subscribe in order to help me get the word out to more people who might be interested. Thanks again and have a great day!
@justmusing2569 Жыл бұрын
@@TradeSkillersAnonymous Subscribed!!
@TheUofastudent Жыл бұрын
This was absolutely amazing
@TradeSkillersAnonymous Жыл бұрын
Thanks, I enjoyed figuring it out. Thanks for watching and your note. I invite you to subscribe while you’re here if you like!
@TheUofastudent Жыл бұрын
@@TradeSkillersAnonymous I am subscribed and going through your videos religiously!! Awesome content and love the details that you add in each one keep up the good work !!
@johnmachnicki17152 жыл бұрын
Great video. I retired and have been woodworking for 25 years. Found your channel and its been a lot of fun watching. Because of you I am thinking I would buy a CNC to add to my shop. I think the One Finity is an awesome machine but I just came across another CNC company, Step Craft. I am wondering if you considered Step Craft and if yes, why you chose One Finity. Just wondering. Thanks again for the very good content.
@TradeSkillersAnonymous2 жыл бұрын
Hi John, glad you’re liking the videos. I did look at step craft, and like the other competitors compared both component quality, and cost. Now, I’m recalling from memory, but I’m certain that a similar equipped and sized CNC from step craft was about $2000 more than the onefinity. Also, I wasn’t a fan of the aluminum extrusion, compared to the onefinity hardened and chromed 37 and 50mm shafts. It’s been a great addition to my shop, and I also have a onefinity review video on my channel if you like. I mainly wanted to avoid belts, and v wheels found on a good number of machines. (Stepcraft doest use belts in fairness). At the end of my research, the quality components vs cost is why I chose onefinity. It’s not disappointed me at all, and I’m glad I did it. I’m sure the other machines are also fine, not knocking anyone at all. No matter which you choose, I hope you enjoy it!
@alexbordo44492 жыл бұрын
Love it
@TradeSkillersAnonymous2 жыл бұрын
Hi Alex, thank you! Please subscribe to see more!
@AdamHeppenstall2 жыл бұрын
Great video - I like your style of explanation - straight to the point, clear and well done! Thank you, most helpful sir! New subscriber
@TradeSkillersAnonymous2 жыл бұрын
Thanks Adam, glad it was helpful!
@Bccad882 жыл бұрын
Pretty new to cnc but I do all kinds of work and this was really helpful. Thanks
@TradeSkillersAnonymous2 жыл бұрын
Hi Harold, glad you like it! CNC work has really opened up new things, hope you enjoy yours! Please consider subscribing while you’re here, I’d appreciate it!
@higherstandardspc2 жыл бұрын
Awesome video, thank you ; )
@TradeSkillersAnonymous2 жыл бұрын
Hi there, thanks for watching and your nice comment! Feel free to subscribe to see more or future videos. Thanks and have a great day!
@bobd.2 жыл бұрын
How long did it take to run both toolpaths?
@TradeSkillersAnonymous2 жыл бұрын
Each cab door was about 30 minutes, the three drawer fronts were about an hour for all 3 (from the same blank). Thanks for watching!
@bobd.2 жыл бұрын
@@TradeSkillersAnonymous That's much faster than I expected. Thanks.
@TradeSkillersAnonymous2 жыл бұрын
@@bobd. 1/4” ball nose at about 150 ipm, 10% step over if I recall correctly.
@carlslater74922 жыл бұрын
@@TradeSkillersAnonymous Yup in my reply to Mr(s) Hermsen ... 30 minute .. hmm ... would take me that long to make the traditional Rail & Stiles frame to put the panel in.
@unknownboulder120511 ай бұрын
Very good content! What I am curious about is how does the door retain its shape over time, given the fact that a traditional raised panel door has a glued up frame, made out of 4 elements? I know that a simple wood panel that is carved on one face, doesn t retain its shape because one side has more open grain surface than the other. It is a matter of concern on this particular project?
@TradeSkillersAnonymous11 ай бұрын
Good question! It was a concern when doing it. I was delivering the piece 1200 miles away so I delayed delivery for two weeks once I was finished with exactly this on my mind. The doors stayed flat and I’ve followed up afterwards and it seems they have remained flat.
@unknownboulder120511 ай бұрын
thanks for the reply! happy to hear that :)@@TradeSkillersAnonymous