How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included]

[@rrenault195]

That's perfect! Finally a step by step guide how RC hydraulics can/should be done! Thank you.

[@isidoromaich7226]

I'm so pumped with projects like this one... I want more but, no pressure :)

[@navigator_071]

One of the better tutorial videos on KZbin. If not the best, and I know what I'm talking about. Bravo !

[@TinC33]

Thanks

[@andypughtube]

I am amazed that I have never seen this design of 2-way valve before. It's really elegant and simple. One improvement would be to make the two grooves as part of a spiral so that the proportional range is larger (so that the ports open and close in the radial direction) . This would be trivial with a CNC mill, but I think that you could also do it by deliberately offsetting the rotor in a 4-jaw chuck, milling one groove then rotating the work in the chuck for the second groove.

[@TinC33]

True, easiest way to make extra grew is precission diamant file. I don't want to complicate in that video, i just show how to make most basic valve, without details, also didn't want to complicate with servo holder.

[@asdf35750]

Very nice! Just a note on marking out, if you use a single datum to make all measurements from you can minimise tolerance errors. In the case of the 4 positions on the chuck, if you measure 63, then 126 then 189 you will get better accuracy than measuring 63, 63, 63. Let's say your measurements are accurate to +/- 0.5mm due to slight errors in placing the ruler, lining up he pencil mark, the width of the pencil mark etc. (you can probably do better, but this is an example). By measuring 63, 63, 63, the last mark will have an error of +/- 1.5mm, whereas it will have an error of +/- 0.5mm if you make all the measurements from one end of the paper.

[@allengentz7572]

Thanks for sharing with free plans and excellent video

[@shashikantsingh6555]

This is far by the most amazing, detailed and informative video about hydraulic valve fot rc models in the world.. thank you soo much for making such a beautiful video🙏♥️🔥... Keep it up sir

[@boxertwo]

Great video on valve and cylinder!! Inspired me to have a go at both. Can't wait for more. As others have said anxious to see your pump and relief valve. Keep up the good videos!

[@TinC33]

Thanks, i'll try to make pump but...

[@omskariyazmaraikayer913]

truly inspirational , never thought such things could be made with a little ingenuity , skill and a lot of patience and perseverance.

[@TinC33]

Thanks, sometimes they every make without any cnc :)

[@eddietowers5595]

You are the boss, TinC33. I’ve always wanted to make a small miniature animatronic driven by small hydraulics. Only I didn’t know how. But this, my friend. Is going to help. Thanks for the video.

[@TinC33]

thanks

[@brucewilliams6292]

Really well done. This inspires me to make some small scientific instruments that involve small fluid transfers. Who is down voting such great content?

[@TinC33]

Thanks man

[@aboxdc]

Super posnetek. Za končno in začetno pozicijo se lahko uporabi kaki zatič in utor, da se ventil ne vrti za 360. 👍👍👍

[@TinC33]

Lahko a obicajno se končno pozicijo doloca z servomotorjem ki upravlja ventil.

[@rccincy]

Do you need a pressure relief valve if you have mixing or it still required for the system

[@TinC33]

Yes you need a preassure relief valve but i don't got them because i got a switch for the pump connected to valve so only when valve is opened motor running, check my other hydraulic videos.

[@alberthinds78]

Man, Thank you. I have been looking at these bulldozers excavators extra that are strong enough to do real digging, Frankly. I just can not afford $4-6,000.00 USD for A TOY. My I only paid $300.00 for my 1991 ford F150 truck. Hell, these RC construction toys with real hydraulic systems, {witch is a MUST, cause geared drive Linear Actuator servo's.} Even the best ones will strip out in time. Again, thank you very much for freely sharing your knowledge.

[@TinC33]

Thanks, true that toys are really expencive, but with some tool can be entirely made as diy...but it's huge project, hope to make once 1:14 all metal excavator

[@alberthinds78]

@@TinC33 I watch a lot of Gold Rush [season 10 Friday October 11 at 9p on Discovery and Discovery } go.discovery.com/tv-shows/gold-rush Plus I am a fan of KZbin Gold too[guy has a full RC gold mine} kzbin.info/www/bejne/bny3dXmpj7GXo6s and I have some ideas to better the operation using the Arduino robotics kits and configuring them to operate all the RC mining equipment from my PC, using sensors, Bluetooth and First person cameras, self guidance system AI's, as well as sight overview cameras, I could run the whole operation myself ... Would cut the required man power from 10 operators down to two mechanics, and three monitors that just watch, take over any vehicle when the AI has a problem. Plus I want build this BEAST, Cat D9 with LeTouneau Pull Scraper kzbin.info/www/bejne/h5mwoqB9mM-erck simply because that's what my Grandpa did for a living in southern California.

[@ActiveAtom]

Hello Tin. We love the power of hydraulics we also enjoy learning here as well. Nice build great lathe drilling location tip with tape strip. We will be back to enjoy more. Lance & Patrick.

[@TinC33]

Thanks my friend

[@dixienormous2704]

I don't even have or build RC stuff but I found this video very informative!

[@TinC33]

Thanks, all i make about hydraulic is that snow plow for the traxxas summit, but got some dream to build once a working model of an excavator, but i need to learn a lot before...

[@actaerucerichie9419]

incredible performance what precision. what is needed as material. for excavator except the video. congratulations again

[@TinC33]

Thanks

[@moritzlaszlo3115]

Impressiv! Jet so simple, jet so precise 😍

[@TinC33]

Thanks

[@joferusa]

excellent video, very detailed, nothing left unexplained Thanks for sharing

[@TinC33]

There is more details i just tell the basic here. Thanks

[@giuseppemaenza9255]

You make jewels. Never make hydraulic motor? Sorry for my english, greetings from Sicily

[@TinC33]

i got plan to make hydraulic pump but time isn't my friend :)

[@giuseppemaenza9255]

@@TinC33 Ok, i wish you good work, hydraulic pump and hydraulic motor are very interesting.

[@KW-ei3pi]

Excellent video. I need to make a Four Way Selector Valve for low pressure hydraulic system. This design will work for that I think, though I would like to add a detent to each position. Thanks.

[@kaspariito]

never done anything like that, ever, but damn, i like it. awesome stuff!

[@TinC33]

Thanks ;-)

[@RCmodeleng]

Hi Tine, I have just seen your links to the plans,, I should have looked, too keen to congratulate your work without looking further at your intro.

[@ianpendlebury3704]

Very informative plus nice machining work. Thanks for making these videos.

[@TinC33]

Thanks

[@phototrb]

Fantastic job....congrats.... Really want see the work of those who down voted....are they capable of doing better than this ?

[@TinC33]

Thanks man, there are always will be people who downwoted, i see videos with so many works in it but still downwotes, people just hit it if they don't liked, i know my biggest problem for downlikes is background mucic, but video with my english and without music just don't go :) Heave a nice day Balu

[@phototrb]

@@TinC33 Thanks.....once again I say, your job is great and would like to see more of your work.

[@T0NGPU]

Very nice! I am just starting with my minilathe and Your channel is very good inspiration.

[@TinC33]

Thanks

[@creativejunior7060]

Very nice project. I will make a mini hydraulic pump and i will make a video of it so you can see it also. Thank you so much for that you share your idea.

[@TinC33]

Thanks, i also planning to make video about pump and preassure reliefe valve, but men there are so many project and no free time at all ;-)

[@creativejunior7060]

TinC33 please make more video. I wanna be like you. You are the best. Very smart. Your my idol.

[@TinC33]

@@creativejunior7060 ah if i be smart i make school and got no dirty hands, but that's not for me, i like to making stuff, repair... And also like all stuff wich smell to gas, trctors, excavators, machines... But all that is just my hobby, so not much time to do that, my main job is electronic maintancer into die cast fabric, and farm afternoon, but now i got a big pause from everything (also here is no new video for a while) because i got surgery on my back (spinal surgery) after a year of bloddy pain into my right leg, now it's all behind but need to be relly careful now, so no more work for this year for me, next year i start again wizh my normal life... Where you are from?

[@creativejunior7060]

TinC33 get well soon TinC33. I wil wait for your next video because you are a good person. Your kind of hobby really help us. I live in the Philippines. Get well soon so can do your hobby because i feel that you really love making things that can make our world better. Thank you so much for sharing your idea.. Godbless you.

[@BrianPhillipsRC]

Very cool!

[@chozechoze6945]

Excellent

[@r.ccustomtruckingsydneyaus4632]

man your soooo smart hey . i love to watch u in action its awsome . wish i could do wat u do with you r.c

[@TinC33]

Thanks man

[@craigtate5930]

Great vid. Been wanting to build a larger version from scratch for some time

[@TinC33]

Thanks

[@boostedkingdom3119]

Can you make a video on how to make a hydraulic pump?

[@stonebayrocker]

Agree! Would be cool with a diy pump instruction! 👍🏻

[@cyklop1977]

agree

[@TinC33]

I will try to make that video also, but need some more knowledge about gear cutting (need gear cutter tool) all other i got, also project is entire assembeled in my head.

[@stonebayrocker]

@@TinC33 Nice ! Are there any possibilities that you could buy gears? I think that would make the project more accessible/approcable for many of the viewers then?

[@stupid-handle]

@@TinC33 You can look this video: kzbin.info/www/bejne/n3S0h5Jvn6d-mJo It's in dutch but on it's description you can find a website that you can translate. This method doesn't produce a proper involute gear, but I guess the approximation should be good enough to run a small pump, and the good point is that it can be done on the lathe if you're able to index the spindle or the workpiece, depending on how you mount it. Another video for reference would be this one: kzbin.info/www/bejne/mIK7iGh6hZmNicU Which is the first on a series he made. All the best!

[@dannyclark9820]

Very nice work. Thanks for sharing!

[@LOLODECEUTA]

Gran trabajo gracias por mostrarlo, dedo arriba

[@TinC33]

Thanks

[@23.kartikbhardwaj40]

You are the best

[@TinC33]

Far from that, but thanks mad man 😉

[@nilugajjar8205]

I love your work. deer were are you?

[@gregsmith8617]

Awesome and informative video, thank you very much!

[@TinC33]

thanks

[@dozer2100]

Excelente explicação, magnífico trabalho.

[@TinC33]

Thanks

[@thomvanhooijdonk4249]

Again a very nice project. Do hou have plans of the hydraulic pump?

[@TinC33]

not yet, and don't expect them too soon please :)

[@حمزةحمزة-م4ف4ض]

Cool work 👍👏

[@tasso6196]

Great work, sir.

[@TinC33]

Thanks

[@garthlee8166]

excellent many thanks for sharing!

[@TinC33]

Thanks

[@andresramirezfernandez744]

great project! did you make the hydraulic unit too? if so do you have a tutorial for it? keep the good work, thanks for sharing!

[@TinC33]

Not yet, but got in plan to make video also about how to make pump and preassure reliefe valve, but free time isn't my friend.

[@silverhead8243]

Great and nice job, thanks a lot.

[@TinC33]

Thanks

[@witneydiggersrc3251]

Great video👍

[@0x_Anakin]

Excellent stuff, subscribed!!!

[@newthinkofficial]

Please, one video on multi directional valve...

[@jamesbeen9904]

YES! good vid! MORE RC!! :D

[@TinC33]

i must start study how to make a pump...

[@deesaraekanayake4374]

Awesome

[@CLAUDIOSRC9529]

amazing

[@harryneumann4391]

Thank You ! You are my Hero !

[@TinC33]

Thanks

[@franciscosena2315]

amigo demostra e fabricando a bomba hidráulica rc.👍

[@seafax]

Very useful, thanks for the tips :-)

[@excitedbox5705]

Awesome work. would it be possible to make the ports around the circumference and use a long rod in the center to control more lines with 1 servo? Like taking multiple of that design but stacking them and routing the fluid in the sides.

[@TinC33]

Thanks, i'm preatty sure it is possible, just need to think and make :)

[@rock-afire-fan]

will it work ok to control a pneumatic cylinder proportionally?

[@TheJustinM]

Love your work! You are very skilled. Did you ever build your excavator?

[@TinC33]

Thanks, not yet but got a wish to get time once in that life to make one from scratch, scale as possible

[@TheJustinM]

@@TinC33 ok, my plan is to build a scale excavator. The things I have learnt from your channel will help me greatly 👍

[@topfisioterapia1330]

Faz pra vender?

[@philangezwiliwamtshengu1909]

Please explain how it holds it's possible without buliding up too much pressure on the pump

[@TinC33]

Because all the lines is in closed position so oil coulnd go from one side to another side of a piston, oil isnt compressable so cylinder will hold it's position until some elements will leak even when hydraulip pump will be turbed off.

[@rodstartube]

very good!

[@rodstartube]

that mini hydraulic unit, did you do it by yourself?

[@TinC33]

@@rodstartube yes i use it for traxxas summit snow plow, check my other hydraulic videos, links are here into description.

[@w.dkalyan6234]

Hi friend namesta 🙏 your hydraulic system videos are super friend i you don't mine please make a video on mini hydraulic pump please

[@TinC33]

I will but heave no idea when, because there are so many plans in my head 😉

[@w.dkalyan6234]

Friend thanks for your kindly respond 🤗 Friend your reply is very funny 😂 it's ok frnd don't worry my friend please if you don't mine can i tell you which type pump plz 😋

[@walfangs]

Você tem como enviar o projeto?

[@anthonypointon2844]

Hello can u up load a video of you makeing the pump or can u point me in the right direction of were i can find one for something like this

[@TinC33]

I got plan to nake also the pump once, but time... You can buy pump on Www.magomhrc.com

[@roykendall5446]

Hi, are your plans for the rc hydraulic valves still available please?

[@TinC33]

@@roykendall5446 it should be, check into video description for the links to google drive.

[@Maulanaalfatih185]

Mr apakah saya bisa meminta gambar file nya

[@over2seeyer]

nice work can this valve be scaled up and used in industrial hydraulic ?

[@TinC33]

Sure it can be, but industrial valves specially hand ones are so cheap... And they are bigger so its easier to make valve as it should be, so they opening ports with piston, precize here is on high level, this type of valves i think only used in rc, because they are so simply that can be make in really small dimensions.

[@over2seeyer]

@@TinC33 >but industrial valves specially hand ones are so cheap... proportional électro valves are actually quite expensive

[@TinC33]

@@over2seeyer i know also basic electrical ones are much more expencive, i replace about 40 valves and proportional cards on my job, because they were 35yrs old and didn't have evenly speed it's change from day to day, 1pc of electronic and pilot (pilot is small valve wich operate bigger valve) from rexroth was about 2k€ i think 😬

[@over2seeyer]

@@TinC33 yep, thats way more than i can afford for a hobby

[@bgrcmodels]

Здравейте от България. Кога ще правите хидравличната помпа

[@asusrampage7793]

got a question for you would you know how to make a single acting diversion valve i have some idea but im not to sure if it would actually work or not

[@TinC33]

Same, just other line connect to the thank instead to cylinder, but than you need a spring into cylinder to stratch by itself

[@shinminh3797]

Hello Tin! Can you tell me the size of the mini bolt you got on the cylinder end and where to buy it? Can you give me the link to buy it, please?

[@TinC33]

i make them, did you watch the video about cylinder? or did you mean M3 self locking nut wich hold the piston?

[@thedude930]

great video! what software are you using for the cad? and thank you for the design

[@alialabade1234]

I want to buy a lathe like yours Can you please give me a link so I can order one ?

[@jalan4524]

Can you share the PDF plans!

[@darkfactory8082]

Evo majstra, škoda da ni več takih.. =) Čisto, pol ročno delo s simpl inštrumenti.. Strugalo zgleda kokr optimumka 300 vario, a ne? Drži se in veliko veselja v delu ti želim.

[@TinC33]

Hvala, me veseli da algoritem servira posnetek tudi domačemu občinstvu ;-) Stružnica je še precej cenejša varianta, gre za "erba 300" kupljena v interdiskontu leta 2011 za ceno 311e zdaj je cena enake struznice v isti trgovini skorajda 600e, je pa z nekaj predelavami dodelavami odličen strojcek za izdelavo majhnih delov kot je tole, si ne predstavljam delat tega na prvomajski ;-) Lep dan, Tine

[@darkfactory8082]

@@TinC33 ;) Servira, servira, vprašanje je samo koga interesira. Uf, sem falu očitno, čeprav se mi je zdela kot optimumka. Jaz tudi imam od interdiskontovcev strugalo Mdb 550, podobne velikosti samo da je daljša. Priznam pa, da je optimumka sedaj veliko bolj precizna, sej je tudi večja, se pa ne pritožujem za izdelavo majhnih delov, ker tudi jaz jih najbrž ne bi delal na prvomajski.. Sicer pa sem bil omejen, ker ima vreteno le fi 20 mm. Sedaj imam 38 in je glih prav za večino stvari. Mojo 550-ko sem pa mislil prodat, a se nisem še odločil. Je pa dober dizajn za servo ventil, imel sem idejo v preteklosti, ampak je bila linearna kot valj z utori.. Bomo videli v prihodnosti, idej imam ogromno, le cajta je premalo.. =( Ne zgubit dobre volje.. = ) Pavel

[@yasons9531]

thank you can you make for 3 cylinders

[@TinC33]

Maybe once, but need to make video for the pump firstly

[@yasons9531]

@@TinC33 ok thanks

[@yasons9531]

@@TinC33 ok thanks ,iwant to know how i can make easy hydraulik valve block

[@TinC33]

@@yasons9531 same as single valve just bottom part with more segments, as i shown in cad photos.

[@tamanchakma9634]

Sir please 100 make a video for hydraulic pump driven motor for rc step by step it is very important for Rc excavator.............

[@TinC33]

I will try

[@tamanchakma9634]

@@TinC33 Thank you for your reply sir.....I wish you would make it sir

[@luisvargasayala1]

At the end of the video, you say about a group of valves for more cylinders, could you do the video or share the plans?

[@TinC33]

i didn't make it yet, you just need to "extend" the plans a bit. i don't got exact plan for them, just that sketch...

[@luisvargasayala1]

@@TinC33 Oh thanks. excellent video. I will be watching the videos and ideas that you raise on your channel. do you have social networks

[@TinC33]

@@luisvargasayala1 i got only ptivate fb no TinC33 social acc so far, thanks

[@dharmjitsingh7393]

Hi bro what is your lathe machine make and size please ? Thanks

[@TinC33]

Hy bro, my lathe is brand ERBA type 300 its somekind cheapest minilathe, much cheaper (50%) like some optimum or grizzly, but they'r preatty the same, mine cost 300€ year 2011 now in same store same lathe cost almost 600€. Maximum leingh of workpiece is 300mm

[@sarvgeetsingh8675]

What is the price of a oil pump press system

[@TinC33]

Check on www.magomhrc.com

[@BlackMetalRC85]

👍

[@prasathnagarajan5645]

Where can i buy these o rings bro i need this for my custom hydraulic cylinder 🙏🙏🙏🙏🙏

[@TinC33]

I order them from ebay, i think i mention that into cylinder video, they'r pratty cheap few $ for 100pc, but be sure that they'r oil resistance before ordering.

[@prasathnagarajan5645]

@@TinC33 thanks bro

[@gohst_jonesy_xx7948]

Hi do you make tham and sell them too i cant build them my selve i have no maschins at home :)

[@TinC33]

Check at magomhrc.com its a store in spain who sell them cheap

[@gohst_jonesy_xx7948]

@@TinC33 thx ,do you olso have 3d models of you’re disigne ? maybe i can 3d brint them wit sla becouse i need only one valve for my rc boat

[@TinC33]

@@gohst_jonesy_xx7948 it won't work, there need to be poliched surface, and lot of force inhere, also i don't got stls

[@gohst_jonesy_xx7948]

@@TinC33 oke thx :)

[@RCmodeleng]

Hello Mr TinC33 .. another brilliant video, I followed your suggestion and watched your valve. Brilliant in design, manufacture and execution, again well done .. You say you are not mechanically trained, but your knowledge, insight and ability to move your thoughts to hard design is the first big step, sizes and detail, impressive, then forward to manufacture. truly brilliant, you deserve more recognition for your work. As a matter of interest which CAD package do you use?? I am conversant with AutoCAD and MicroStation, but I guess you are using a solids modelling package? really enjoy watching your stuff and seeing the execution into reality, I like the idea of a multiblock valve, seems the obvious direction, I have not researched online at the variety of designs, which I guess you have and replicated in miniature, again very well done, I will take pleasure in watching your other vids. I am envious of your workshop. I must do more. You mention your plans are available, that's very kind of you, but where to find them?? Take care and wish you good recovery.

[@TinC33]

Thanks man, i know a bit about mechanic because of my job. When i was 18 i employed into fabric (die cast fabric) as elecrtonic maintencer, after finished school i didn't know how to connect 3 phase motor, everything learned on my job, electronics and mechanic need to cooperate really good to solve the problem as fast as can so production line worke again... As i say i work in grqy cast fabric, it's really dirty and rough job every motor got more than 100kg, and also got huge hidraulic generator with lot of hidraulic, afternoon and on night shift the electronic is the only person for fix problems here so wee need to know a bit of everything, from electronic like pc, to 110000v switching, welding, and most important improvising. Well do i need to tell that i use lathe and mill for the first time on my job. Sellary isn't that big. But the job is good, not boring, and learning every day. Heave a nice day and stay health in those days, here in Slovenia everything stopped, and closed from monday.

[@mdalaminhosen8774]

Where i find hydraulic generator to buy??

[@TinC33]

Magomhrc.com

[@mdalaminhosen8774]

@@TinC33 Sir, I didn’t found this same product on magomhrc site....plz give link of this product.......

[@TinC33]

@@mdalaminhosen8774 that pumo is about 5y old, they don't make them anymore, but there are few different pumps, with integrated tank, brushless...

[@buddhitamang9908]

Hello tina I'm buddhi how to make hydrolic compreser

[@TinC33]

You mean hydraulic pump, you only need 2 gears and one of them connected to a motor, i will make a video once...

[@songarden4695]

Made hydraulic pump plece

[@TinC33]

I will, please wait...

[@humlakullen]

Yeah, but can u build a mini nuclear reactor..?

[@saklinemallick560]

All ok but what is in your link you shared for Google drive check the link

[@TinC33]

Yes there are. Jpg files of plans for the valve 25 and 30mm. Is it not work anymore?

[@saklinemallick560]

@@TinC33 no just check the link teacher

[@TinC33]

@@saklinemallick560 i checked and all i see is two folder with plans 25 and 30mm valve, what you see?

[@saklinemallick560]

I got it teacher Can you please make a video of how to make a hydraulic pump rc

[@TinC33]

@@saklinemallick560 i plan to make it yes, but i don't know when.

[@Vinodkumar-lr5co]

I want one can you give it me

[@TinC33]

I don't got no one anymore, need to make new for the project

[@thzzzt]

Pretty neat, but I must say, I'm surprised the barbed connections actually hold up.

[@TinC33]

Almost every time need to cut the pipe to get it of.

[@medion1048]

Hi, is it possible to have the drawing files with the relative dimensions of the valves and the hydraulic cylinder? I thank you and I leave you my email .........

[@TinC33]

Hy, all i got is plans into description link (download from google drive)

[@iptinchan1699]

🙂👌👍✌

[@karloplesko7762]

Is it for sale?😁

[@TinC33]

Not yet, i just playing with prototipes, maybe some day, because i see lot of interest here... For now visit www.magomhrc.com they, got best prices for rc hydraulic, they got everything...

[@ujiaudani0711]

Is there any WhatsApp contact? I want to buy it. and how?

[@prasathnagarajan5645]

Sir why don't you give away some of your cyclinder and valves

[@w.dkalyan6234]

Please don't forget my 🤗my request friend 🤝

[@ryandikadika1109]

excuse me, may I have your email?

[@TinC33]

It's mention somewhere into my info, check my cahnnel and than click last tab i think there you can see the mail

[@ryandikadika1109]

TinC33 Sorry, I didn't find your email. Do you sell these hydrolic pumps? and how much is it?

[@TinC33]

@@ryandikadika1109 [e-mail]

[@ryandikadika1109]

TinC33 I have sent an email, have you entered?