It really is, after good year still love it 😊

@@tillmerit8431 it can etche a bit of materiall yes but not so much, like m3 thread will still be usable but the nut heave a bit more backlash on it, it become noticable when we make the process wrong, like too much current lead to higher gemperature of solution, more material etched...

@@mariusz1977 do you heave a solution, programming is not my favorite job 😔

@@MichaelR-r8v you not only fix its loudeness, but also inrease its power right? If that screw is just a bit unscrewed bunch of power loose on it

@@steveparry7364 yup, when i make this review neje4 with E80 cost more than 800-900$ so my face was like 😳 when i see neje4 with E80modul for i think $500 wich was price only for modul at begginning, also as you said great machines...

@@NotxMyxProblem i can't say but preatty sure it can

@@P_double_H check on magomhrc.com

@@everlast2658 i think india

Doesnt that matter, but for this you can buy the tough green one

Look at 13:38

@@pyrhockz love to hear that 😀

@@roykendall5446 it should be, check into video description for the links to google drive.

@@Nick-fi6qr i bought one from pertinax material, i never seen that before but running great for years with some hard work sometimes, but they are preaty loud but i issume steel one will be louder. If i remember gears wast tagged as optimum 20, 25...

@@gipielle hmm idk but if you got a second robot i would try to replace part by part until find the problem 🤷‍♂️

It can engrave if you lower down the speed and power, otherwise it make too deep and bright engrave, because it cut in deep instead of burn the surface due to its power, i alwqys use lower power modul for engraving because it make better deep black engrave. Extra modul low power is about 30$ and deffinitely worth a buy so you got covered every job.

@@TinC33 So are you saying for $30 I can buy a low powered laser "head" or module to replace the 20w laser on the Max 4? That sounds like a great idea, is it a Neje laser? Do you have a link to the module? Is it plug and play? Why not just do the engraving at a lower power? If I run the 20w laser at 25% why would it be any different to a 5w laser? Thanks so much for the info :)

@@MrChargin depend on what type of neje 4 you take, if you take neje e80 it work on 24v (only E80 work on 24v) so you need to buy also 12v power supply for all other moduls, look on neje store or cjeck the links here in video description. I always advise to take (if your budget allow) neje4 with E80modul(wich is simply a beast for cutting + extra modul 3,5w or 20w is still good for engraving + in that case 12v 5a power supply, so you got everything you need

Its preatty same but can you tell me is your x axis has table handly scraped running surface? I also hear bearings is different grade...

Dont talk i need to bring them in middle floore of my house by narroy stairs, after i remove back shield it become mach smaller and eqsier to carry arround, i also screw them on a piece of wood by long line, than on that wood screw two piece of wood front and rear parpendicular, so i had 2 handle on front and 2 handles rear, so 4 people easily carry them up on stairs.

Thanks

Sure it should work perfectly, i didn't want to demage working buttons but its a great idea because there are just no way for some bittons to be used anytime 😀

How do I stop my tv from saying change batteries when I just put in new batteries

Thanks

Thanks, and yes i am still satisfied with a lathe, werry happy specially when i work on steel because its so robust it can make a big steel chips, and making any thread is so satisfied due to leadscrew transmission wich cover all the pitches... Only weak point so far is seals, oil leak out of lathe on alnpst every axel(for transmission) and every hole even blind cup, so i take out the oil, and replace the o-rings, some parts i turn a bit to get in bigger o ring, and use a liquid seal to reseal the cups, the lathe is now dry for more than half a year before that mod every day few drops of oil was on the pan, i really dont understant such a good lathe, good brand but then they use shitty cheap o-rings to seal, it was visibly by naked eye how shitty o-rings was wich was even not round, had exess from molding... There is some dirty work, not simpliest job but i coudnt wach my new lathe was oily every day. I had many more improve in mind but waiting to realise. Also buy new qctp 250-111 wich is my favorite, i try with 250-222 but it was way too big, original one was shitty, so don't buy them, check for 250-111 on ebay.