How To Make RC Vector Wing Kite 如何製作向量動力遙控風箏(RC Airplane DIY 遙控飛機製作教學 NO.06)

如果你喜歡請訂閱並按讚，這是我創作的動力來源，謝謝！
If you like it, please subscribe and press like. This is the source of motivation for my creation, thank you!
Flight Test Video
飛行測試影片
• RC Vector Power Kite F...
3D STL FILES:
3D 列印檔:
supr.link/zovfc
supr.link/NmAI1
supr.link/xifzB
Configuration(配置) :
- Motor(電機): 2205 2300kv,
- Propeller(槳): 6030
- ESC(電調): 12A
- Servo(伺服機):14G x2
- Battery(鋰電池):3S 400-600mah 25c
- Flying weight(飛行重量) ~ 240g
Send me an email if you have any questions
如果有任何問題 請發郵件給我
[e-mail]
有需要電裝或3D列印零件的 可以到以下網址尋找
www.ruten.com.tw/user/index00...
如有找不到的再留言告訴我，謝謝！
Facebook | profile.php?...
Instagram | / chenrcfly.rc_airplane

[@russellturner4885]

Many thanks for this video, all I can say is brilliant and fantastic. Will be making a start on the project in the morning. Please keep these projects going. Russell from Newcastle UK.

[@patrickpatoche9614]

bonjour , belle presentation et beau projet , je vais assayer de faire un modele,merci pour le partage

[@angelrc9869]

You're welcome, thanks for your reply.

[@rajeshpenta7735]

Exallent 👍👍..

[@tungym]

Thanks, You inspire me a lot!

[@angelrc9869]

You're welcome, thanks for your reply.

[@joaerophoto8485]

Th Hello, Congratulations for the desing of the kite . The draw of your kite is it available ? Where can we find the files for the printed parts ? Can you furnish a kit of the kite ? Thank a lot.

[@angelrc9869]

Is available. 3D STL FILES: supr.link/zovfc supr.link/NmAI1 supr.link/xifzB

[@pelurusilver]

kite file cannot open. file damaged. many times download still corrupted

[@angelrc9869]

My test is normal, it may be a different country, you can write to my e-mail, I will mail it to you, thank you!

[@sufyjr536]

Where is the centre of the gravity?

[@angelrc9869]

approximately at the junction of the vertical and horizontal rods

[@sufyjr536]

After a few tweaks I finally maiden my kite... Thanks...

[@user-zs4iv3vf5m]

謝謝分享，很有趣呢，，請問 碳纖棒可以用膠條代替嗎？另外那"膠布"可用剪開的垃圾袋代替嗎？ 因我不知那 nylon fabric 在那找到。

[@angelrc9869]

膠條太軟 強度和硬度都不夠支撐 垃圾袋容易受外力破裂 軔性不夠 尼龍布抗拉扯 比較不會破

[@user-zs4iv3vf5m]

@@angelrc9869 thank you for reply, 我找找看，:p

[@user-tu5wj3ge6m]

請問 需要做偏角嗎

[@angelrc9869]

不用 這馬達的方向上下左右是可以用遙控器改變的 要偏角就用微調的就可以了

[@user-tu5wj3ge6m]

@@angelrc9869 好的 謝謝你！

[@kenkuo7852]

可以請教一下電裝的配置嗎？

[@angelrc9869]

影片下方有註明呀 按一下 更多內容

[@kenkuo7852]

有找到了，謝謝

[@kenkuo7852]

請教一下，遙控車的遙控器能接遙控飛機的電刷跟馬達嗎?

[@angelrc9869]

​@@kenkuo7852 對不起 我沒有玩過遙控車 只要輸出可以接一般的伺服機 應該就可以 不過此機要用混控功能 才能正常操作 謝謝！

[@kenkuo7852]

我是打算用遙控車的控制器做一台雪地車給小孩玩，因為只需要2動，就馬達跟方向，但是接上去卻是按鈕在控制馬達，那就只有開關沒能控制轉速。