Tap to unmute

How to make sculptural glass forms using the lost-wax casting technicque with artist Bruno Romanelli

  Рет қаралды 110,391

Julian Langham

Julian Langham

Күн бұрын

Пікірлер: 65
@leighbell6438
@leighbell6438 3 жыл бұрын
Beautiful piece. Love the simplicity of form and colour. This is a great tutorial which will help me make a piece I have been wanting to do for some time. The clear steps make the process much clearer.
@Mallratthrift
@Mallratthrift 4 жыл бұрын
Absolutely riveted by the process, so much can go wrong. The end result was spectacular, like amber encased in perfect ice sphere half that will never melt.
@jeffreyandrews196
@jeffreyandrews196 6 жыл бұрын
Pearls before swine.Just be incredibly grateful that a master craftsmen allowed you a glimpse of his process.
@MaiMai-os7zm
@MaiMai-os7zm 4 жыл бұрын
Omg I am blown away. Gripping... and totally worth the watch
@santoclaupettingzoo
@santoclaupettingzoo 8 жыл бұрын
You Sir, are a true glass GURU!! That piece "TiTaN" is amazingly awesome.
@epicepidemic7131
@epicepidemic7131 5 жыл бұрын
And then......he drops it~! Truly unbelievable.
@simongreenham
@simongreenham 11 жыл бұрын
beautiful - the man and his craft , great little film too .
@atzonaftaniel4798
@atzonaftaniel4798 6 жыл бұрын
I love the texture of cire perdue glass pieces. René Lalique designed and made wonderfull glass cire perdue pieces (with his chef d'atelier Maurice Bergelin) to make them look as though they were carved from one block of rock crystal. Rock crystal is a mineral or gem also used by Lalique who had been a jeweller prior to glassmaking. Love your craftsmanship and the wonderfull piece you made, very sensual and tactile. Invites to touch.
@strumhead
@strumhead 9 жыл бұрын
fascinating to watch this process. What a lot of work!
@Fuphyter
@Fuphyter 2 жыл бұрын
Very cool watching this process
@davidrosen3970
@davidrosen3970 8 ай бұрын
stunning. Perfect. Wow. Thank you.
@MaiMai-os7zm
@MaiMai-os7zm 4 жыл бұрын
THANK YOU for this. Beautiful work.
@Geo-jv5zm
@Geo-jv5zm 5 жыл бұрын
Art is priceless ... for those who know what art means, how many efforts need and what the result should be ... BRAVO
@TheJiminiflix
@TheJiminiflix 9 жыл бұрын
I like this video- no talking.
@sergiocguimaraes
@sergiocguimaraes 8 жыл бұрын
Really beautiful . What a technique !! Our deepest congratulations for the technique and creativity. From Stylia Glass Studio in Brazil.
@Al-ny8dk
@Al-ny8dk 8 жыл бұрын
Stunning! A scultura that evokes the sense of the cosmos in movement and depth. Breath-takingly beautiful. These comments below that say the glass is not clear... clear glass is easy to buy industrially. This is sublime.
@justinepalmer9756
@justinepalmer9756 4 жыл бұрын
A true Glass Artist
@santoclaupettingzoo
@santoclaupettingzoo 8 жыл бұрын
Holy crap just read some of the negative comments. Guys do your f***ing homework on working with glass. Glass is a true bitch to work with and this is ART. If the artist is happy with the outcome, that's what counts. I my self appreciate something made form almost nothing. Way to go Bruno! Keep up the great work!!
@sarahlibeck1745
@sarahlibeck1745 9 жыл бұрын
Great editing on this video! :)
@latitiaruiz8016
@latitiaruiz8016 5 жыл бұрын
Absolutely stunning! thank you.
@saranoamark6360
@saranoamark6360 10 ай бұрын
How do you recommend removing the wax form from the plaster investment mold with a DIY set up?
@daveh9521
@daveh9521 3 жыл бұрын
Great condensed view of the glass casting process on a large scale, but...what is it...??
@letsif
@letsif 8 жыл бұрын
The video is better than the piece
@azucenagerman8803
@azucenagerman8803 3 жыл бұрын
Just art 🤩
@RobGLive
@RobGLive 6 жыл бұрын
What I'm not understanding is why did it take three weeks to fuse and anneal?!
@surface-form6134
@surface-form6134 4 жыл бұрын
What is that tool called that he is using to shape the dry plaster with, type of potters wheel with cutting attachments?
@julianlangham
@julianlangham 4 жыл бұрын
If you have any questions regarding which tools Bruno uses please contact him directly via his website
@saranoamark6360
@saranoamark6360 10 ай бұрын
If I shellac a kiln fired ceramic sculpture can I use this to create an investment mold? If so how do you remove the ceramic piece from the plaster investment without breaking it? Is this challenging?
@julianlangham
@julianlangham 10 ай бұрын
For any questions questions related to creating glass artwoks please contact the artist Bruno via his website www.brunoromanelli.com/
@watercat1302
@watercat1302 9 жыл бұрын
I know nothing about glass making here, so forgive me if I ask: why so many cast and mold for just a glass semi-sphere?
@TetraDodecaMan
@TetraDodecaMan 9 жыл бұрын
I was thinking... So this is why it costs 3000 dollars lol. Seemed like a lot of work for a not so mesmerizing finished product
@julianlangham
@julianlangham 10 ай бұрын
For any questions questions related to creating glass artwoks please contact the artist Bruno via his website www.brunoromanelli.com/
@maalbema
@maalbema 3 жыл бұрын
Maravilloso
@pauldjacobs
@pauldjacobs 9 жыл бұрын
Pretty clever processes, but I was waiting for a conclusion but it didn't seem to happen?
@nouzmb
@nouzmb 9 жыл бұрын
He enjoyed doing it
@Realcazerdus
@Realcazerdus 4 жыл бұрын
what is the flexible paper product being used to make the plaster mold?
@ifeotto
@ifeotto 4 жыл бұрын
it is a sheet of floor coating
@spencerdasilva
@spencerdasilva 8 жыл бұрын
The 3 weeks in the kiln needs more information. Please
@RichlandJoey
@RichlandJoey 8 жыл бұрын
Actually, the melt was fairly fast. The time-consuming part is the cooling process. With glass that thick, he likely had to cool it down the first couple hundred degrees at no more than 1/2 degree per hour
@RichlandJoey
@RichlandJoey 8 жыл бұрын
No. Initially, the furnace temperature was probably raised to around 1,600 deg F to melt the glass but the temperature wasn't held there long enough or was cooled down to below 1,200 F too quickly. That allowed the trapped bubbles to be captured. I do traditional glassblowing. When I add fresh glass to the furnace, I raise the temp to 2,200 F and hold it there for at least 2 hours. Then, I slowly cool the glass down to around 1,900 F and hold that temp for several hours. The glass is still molten and fluid but, with the lower temperature, it's more dense. It's a process often referred to as a squeeze - to help get rid of the air bubbles. If cooled down to a solid state without that kind of pause, you get entrapped bubbles.
@kitebabe05
@kitebabe05 8 жыл бұрын
3 weeks in the kiln??
@MemphisPains
@MemphisPains 9 жыл бұрын
The finished piece is interesting. Not sure it's worth all that effort. I feel like the casting process could be simplified if the end goal is a half sphere with a hole in the middle.
@jagboy69
@jagboy69 5 жыл бұрын
What's the investment? Glass cast?
@maalbema
@maalbema 6 жыл бұрын
eres genial
@nomadapw560
@nomadapw560 8 жыл бұрын
this video gave me blue balls
@DeathmetalPersian
@DeathmetalPersian 9 жыл бұрын
This is some of the silliest and most inefficient glass making I have ever seen. The outcome is definitely not worth the effort.
@xyyx1091
@xyyx1091 4 жыл бұрын
Another youtube “expert “
@Yardoun
@Yardoun 9 жыл бұрын
Am I missing something? Lmao, this seems like a whole lot of work for a murkey piece of glass.
@TylerWashington
@TylerWashington 9 жыл бұрын
yes
@atzonaftaniel4798
@atzonaftaniel4798 6 жыл бұрын
This is about sensuality, tactility and the purity of shape. It invites to touch.. You should try
@JWSmythe
@JWSmythe 6 жыл бұрын
"art"
@cubby1812
@cubby1812 4 жыл бұрын
Okay but what is it?
@doomedalready
@doomedalready 8 жыл бұрын
To bad it was to complicated to explain the process, in each step. very professional
@bobbywinters7892
@bobbywinters7892 6 жыл бұрын
Three rights to make a left. And they filmed it.
@tahoefor
@tahoefor 5 жыл бұрын
Interesting technique but no wonder it's not popular.
@sean.sullivan
@sean.sullivan 5 жыл бұрын
forget about counting likes and views.. how many times throughout the video did you say "WTF?"
@rajibusa
@rajibusa 9 жыл бұрын
way too strugle for a simple thing!
@OneEphraimite
@OneEphraimite 7 жыл бұрын
I can understand why it's a lost technique, it's definitely not efficient.
@Valient6
@Valient6 6 жыл бұрын
I agree with most people on here. This thing looks dumb.
@Hundred100
@Hundred100 6 жыл бұрын
ok so im not the only one thinking this, way too many steps for an opaque half sphere
@TymstoneArt
@TymstoneArt 9 жыл бұрын
I thought it looked amazing. Oh taste
@cplcabs
@cplcabs 3 жыл бұрын
What the heck is it? That’s a lot of work, time and energy for that chunk of glass which is full of bubbles and poorly polished
@coffeelover1507
@coffeelover1507 6 жыл бұрын
If he was going to carve the original model he could have carved the piece of plaster that the glass went into for casting 1. carve plaster 2: put in glass and fire in kiln 3:finish work off.
@ZiggyWhiskerz
@ZiggyWhiskerz 9 жыл бұрын
it took three weeks in a kiln!!!! seriously??
@manchitas3531
@manchitas3531 6 жыл бұрын
WTF is that?
How was it made? Kiln-casting a glass sculpture | Colin Reid
13:58
Victoria and Albert Museum
Рет қаралды 55 М.
Lost Wax Casting- Wood into Bronze.
9:35
Lundgren Bronze Studios
Рет қаралды 12 М.
How to Make a Mold for Glass Casting
19:32
Kent State Glass
Рет қаралды 73 М.
Masters of Studio Glass: Toots Zynsky
5:52
Corning Museum of Glass
Рет қаралды 117 М.
Jon Kuhn Glass
10:53
Our State Magazine
Рет қаралды 1,2 МЛН
Optical Glass Sculptures by fine art glass artist Jack Storms - The Glass Sculptor
8:50
Jack Storms | The Glass Sculptor
Рет қаралды 8 МЛН
Glass  Casting - using the 'open mould' method with Di Tocker
8:48
Di Tocker Glass
Рет қаралды 38 М.
Slumping Basics
13:19
Bullseye Glass Co.
Рет қаралды 62 М.
glass casting
5:08
New Mexico Clay
Рет қаралды 517 М.