How To Make Sea Scooter at home Using PVC Pipe - v2

[@ronniestanley9090]

Very good for a concept. Install straight motors without gear boxes, programmable motor controllers, and a sealed throttle device. This thing could go much faster and with programmed ramps you could get much better performance. Maybe even tighten up the clearances between the props and the tubes to get greater thrust from them too. Great project and great results.

[@ballardtech827]

It would also help if most of the thrust wasn't going down his pants

[@ЛотариоЛибертини]

And add a deadman switch on a tether so the thing doesn't get away from ya

[@BobbyTucker]

He did a pretty damn good job using materials he found around the house, I'd give him on a scale of one to ten about a "12".

[@Stopcommunism]

Great points thank you

[@matatisan]

comment it is always easier than doing it. all those stuff never works in the first attempt

[@tennesseemattoutdoors5405]

40 years from Now..Man says to The media “my inspiration for getting us to Mars started when I was building PVC watercraft in my moms kitchen.

[@d_ward4871]

This same concept designed onto the hull of a canoe or kayak would really be badass, primarily for its ability to push through weeds and debris without tangling up the props . Amazing potential here.Nice.

[@That0Homeless0Guy]

Those exist

[@d_ward4871]

That0Homeless0Guy what’s the product called ? I’d like to check it out, thanks 🙏

[@That0Homeless0Guy]

@@d_ward4871 Fucked if i know. Look up kayak motor or kayak jet motor. There's even peddle versions too.

[@PhillipMikeHunt]

Needs a tether. If your hands let go it could be a long swim.

[@numbblackpicture]

Deadman switch.

[@Stopcommunism]

Don’t worry, I built one it can’t get away from me, I put a tether on it and put it around my neck, lol😂

[@scottywills124]

@@Stopcommunism Going down with the ship. Respect.

[@MersiDivil]

Lmao ​@@scottywills124

[@markgamble8377]

Didnt realize what meant by a sea scooter.till the end.outstanding.

[@abhishekgourav6144]

The amount of stuff this guy has is what blows my mind even more

[@BlackMamba-lt8oe]

That is China not India 😂😂😂😂

[@surajbhan2015]

My favourite channel creative channel I love this channel

[@timothymuir5167]

Sweet, nicely done, thank you for demonstrating the assembly, and most importantly the actual use of it…. I love it! Dude you should just make a bunch of them and sell them as aerators (avoid the lawsuit crazy crowd), this would be good for an investor.

[@charlestseng1014]

Good designed PVC sea scooter , I am just worry about the motor shaft leaking

[@thesatanicridermotovlogs1772]

Did you put the red an black wire together on purpose?

[@adieadventures3371]

Me to

[@robdagr8te]

Maybe a Momentary switch you can hold down with your fingers wired to a relay would be better than a damn double pole throw ac breaker.. still pretty cool

[@RandyRandersonthefamous]

virgin proper electrical parts, chad "make everything out of romex and breakers"

[@joshuaraley686]

He using Bosch tools so I don't think he can afford to buy the correct things

[@jeff61177]

If only because if you let go.....your scooter is going to be very lonely on its trip.

[@Russell_and_Rosko]

Smart human. I love the creativity. I’m sure there will be more versions/refinements made. Don’t listen to the haters ✌🏼👍🏼

[@sureshkumar-ib6wx]

o9o o oooo Loop 9o ok

[@pollikopi2248]

I did not think that these switches are sealed. Great idea) Как обычно из суперклея и палок получилось что-то стоящее)

[@moonlite6241]

ага да. два таких винта стоят 4 тысячи аккум 6s 5А стоит 5-6к два мотора с редукторами выйдут 2к плюс два вала гребных и втулки пусть 1к и 1к на все эти трубы и провода. итого 12-15к за какую то хуету. проще лодочный мотор купить 3лс бушный и лодку и ходить 22км в час.

[@jonathanlau1221]

Thanks to this, Cuba to U.S has never been easier.

[@W3BZSL1NG3R]

🙉🙈🙊

[@nightlighton]

Man if you built those impellers like they built the jets on jet skis then you'd get ten times the power out of those props. All the water is cavitating around the blades . Makes me wanna build this for my kayak.

[@oms_fightsbb6509]

Y’all ever notice how he this man has everything 😂

[@wingbeacon8760]

money

[@dwyanedabanana9257]

money and now he has all he needs cuz you cant go get some stuff like that

[@quickturn66]

OMS_fights Bb except shoes

[@00708046]

He probably built it before and was juat showing us how otherwise , no you wouldn't have 2 dc motor and shafts and propellars that match all of your perfectly matched pieces of pvc pipe as well as batteries and most other hardware. It worked great !

[@Deepak25t]

A girl to shoot the videos...Omg

[@vinodztube7363]

Land. Water. Now what? Sky. 👍

[@rodstartube]

call colin furze

[@titareyes202]

Lol

[@chrisw5742]

That reminds me I gotta get my paraglider wing out to air it out.

[@solar2696]

Nah, next is space

[@robertcole9391]

One important thing.. One motor should have been wired backwards to create a counter rotating engine. This give stability and allows it to go straight without manipulation. Common practice on all multi engine setups weather a plane or vessel. But the idea is excellent for a kayak. Or something similar.

[@jlucasound]

Right. Counter rotating and mirror image prop pitch.

[@stevelamperta865]

That would be correct if it was not inside the tube. But they will not act that way

[@walteraustinr102]

Kudos to you. I love ingenuity. There are always ways to improve and many will suggest them, but you built it, they only talk about building one.

[@roryemilio7835]

I know im asking the wrong place but does any of you know a trick to log back into an instagram account?? I stupidly lost my login password. I appreciate any tips you can offer me.

[@reycassius6944]

@Rory Emilio instablaster =)

[@roryemilio7835]

@Rey Cassius I really appreciate your reply. I got to the site on google and Im in the hacking process now. Takes quite some time so I will reply here later with my results.

[@roryemilio7835]

@Rey Cassius It worked and I now got access to my account again. I'm so happy:D Thanks so much you saved my account :D

[@reycassius6944]

@Rory Emilio Glad I could help xD

[@rimurutempest8881]

If ever I'm living near the sea shore,, I would definitely love to make that 😁

[@jimmylostigen6023]

Those switches dont like water. Maybe a coupple of relays and a pair of reed switches and magnets would be able to make it completely waterproof?

[@Dontfearthereaper001]

Put rubber button boots on them. Thats simpler

[@hxhdfjifzirstc894]

Also should be momentary switching mechanism in case you let go.

[@RandyRandersonthefamous]

I'm sure you could also seal them with something like silicone grease.

[@brianmason9803]

Beautifully executed and a wonderful scraps box you have. Love the welded pipe construction. It does occur to me that the butt-weld for the cowling tangs might be vulnerable. If you were to use two endcaps for the motor mount, back-to-back you could sandwich the rubber seal between them. You could then weld the tangs inside the second endcap. Lovely work.

[@ssao0000]

And his boxes are sooó clean! Still great video for understanding the basics.

[@shivarajapathys5311]

The

[@matthewjohnson2495]

Dude you are a Genius I was wondering what you would fasten that to I didn’t realize it was gonna be dragging you

[@jamesyupac1721]

feed pro

[@hunterherridge1184]

There's a video in your ads

[@hotchihuahua1546]

I’m jealous, you have more quality junk than I have , enjoyed watching ! 😁

[@AFishBicycle]

Looks like a tether of some kind would prevent it from taking off across the lake and leaving the operator behind? Amazing work!

[@Yo-SoN]

haha I love the graceful docking at the end

[@Thelovekvsemoguschij]

Пока делал, купил торцовочную пилу, а начинал с ножовкой )) 👍👍👍

[@scrapmechanic112]

это японец или китаец

[@РустамАбакаров-я3т]

И бормашинку))) лобзиком ручным видимо задолбался)))

[@alfbittner6489]

This would get your kayak moving quite well

[@say1033]

Just had the same thought. Thinking of a way to make outriggers that double as propultion and can use rod mounts....

[@Youtubsucks5]

That's exactly what I was thinking mounted on a kayak

[@timwegman5776]

Funny I came to this video looking for that same thing “a thruster for my kayak lol”

[@tataict3292]

@@Youtubsucks5 .

[@thegeneral3094]

How many horses power is this propulsion unit

[@randomtuberhandle]

Im going to go out on a limb here with a crazy guess that this guy has his doctorate in electrical or mechanical engineering or something. I mean, this is what he does for fun? I wish I had half the tools and skills he does. Wow. Impressive.

[@tbublz]

Most likely atleast one degree in Mechanical Engineering. Then an education in electronics.

[@AbrahamTheGOD47]

This kid did a great job and made something cool.

[@nonongbanzuelo3005]

good for a jets ski...brilliant man..well done...

[@tacticalant3841]

Im impressed it worked so well considering the size of the wheels

[@dannyearls1880]

Thanks so much for the quick turnaround on your project ,nice job

[@jordankelly8638]

I’d like to see Colin furze remake this

[@ohioman4646]

Colin furze would make it powered by an actual jet engine, or rocket or something

[@supjay3945]

Collin fur would use welding and tools I prolly dont have

[@rhoemberg1969]

Chuck Norris would build it and then beat up Colin Furze just for trying to make it better than him.😎👍

[@maxdaviduk2626]

Colin fur would use a pulse jet above water 💧

[@FJ80Coop]

Rickyrickrack chuck norris,never heard of her said Bruce Lee...

[@sethcril]

You turned yourself into a human fishing lure haha

[@Vo0d0o2009]

ahahahahhaahhhaahaha

[@BrandonDickenson35]

I've seen little firework boats that'd make him feel like a real submarine. 🤣

[@minicontenttv168]

This Scooter look so good, You are good designer,

[@souravmandalguitar9789]

waaaaah nice. love your work

[@AClRCLEOFLlGHT]

If that's a 'sea scooter', I now know I never want a sea scooter. Thanks for the informative video.

[@jabocjacob7064]

Who else was impressed with that impeller shaft runout

[@dougthibaudeau3130]

That's cool! If you placed a larger step up cone facing forward to be a scoop then a step down at the back to increase thrust you'd be surprised at the outcome. I must admit sir, you have a lot of odd components on hand. Do you have an ebay store or family owned hardware store? Very impressed. Please keep up the good work, you give me lots of ideas.

[@anglerkacang]

Nice... Super kreatif...

[@MrManta2012]

in florida I call it trolling for gators, really nice project

[@davidchristian2215]

Injeanus

[@ameduran7203]

THATS 🥇 🔥 Ps: if you were to extend the propellers more you wouldn’t disrupt the outlets and would go faster

[@023douwebakker]

@MANBEARPIG 7734 at the moment the propellors propulse the water partially into his body, making the shaft longer will have the propulsion outlet behind his body Less resistance in the path of the outlet means going faster

[@bradleymorris8875]

Douwe Bakker cavitation... supply of water too little.

[@maratgaleev796]

Звук, как в Иван Васильевич меняет профессию, когда межвременной портал открывается))

[@АлександрМельниченко-ч3ж]

Marat Galeev ору

[@СергейЛойченко-р7й]

Плагиат

[@pankajmakvana83]

Marat Galeev cdgc

[@henrypeterson1981]

Another Incredible Build! Thank You for your Videos

[@vlomless797]

Nice idea, and the human mind can accomplish and accomplish.

[@wutoppo3473]

โอ้สุดยอด...ทำให้เด็กๆเล่นคงจะสนุกมากๆ

[@paulsim24]

If you lost your grip on it, it’s gone! Rather than the conventional tethered kill Switch though, you should utilize a momentary switch directly under your fingers or palm.

[@bn2816]

Good idea.. strap it to your wrist for now

[@chuysalazar466]

Well i assume its not for butterfingers.. shouldnt lose grip unless your a girlman

[@JohnCoffins]

@@chuysalazar466 you're*

[@scottkauffman6116]

Great ideal great build . Just need more info on parts for those that don't know

[@lalteacolney1609]

Good idea 👍👍

[@GruvenHaus]

2 thumbs up back atcha lil' man.

[@jonnun7713]

I just built one while watching this!

[@adambrocki8141]

No u didnt

[@supjay3945]

Wheres the video

[@cpinedo]

Very nice Scooter... Congrats..

[@christopheschwartz7374]

Deux mot: Ingénieux et astucieux! Bravo continuer...

[@joejoejoejoejoejoej]

Quite therapeutic watching this !!! My only concern is the switches..... Great idea though ❤️👍😇

[@gembelberpangkat6065]

Waaaaawwww That's so amazing IDEA 🤜🤜🤜👉👉🤘🤘🤘

[@gitra182channel]

Mantap,,, kreatif,,, 😇😇😇

[@dyrtymike5589]

That, Sir, is MARVELOUS!!! My brother is a plumber & we will make this!!!

[@FunkMasterLShizzle]

Super creative alike the ingenuity that went into it. I saw something like this at CES2020. 🤩

[@BobbyTucker]

Las Vegas?

[@d-e-a8209]

Thank you @creativechannel now I can smuggle my cousins to the United States with a pvc water scooter true the Rio grande Valley

[@josetrevino9869]

@Bo Hunter thats why its called smuggling lol

[@haryantoc3627]

Consider of the Water Temprature bro.

[@F.Green777]

Секретная китайская разработка"Посейдон":)

[@TriNguyen-jf1tr]

This will be used in the coming 007 movies to help agent 007 to escape the hunt killers. Well done...

[@gemunujayasinghe618]

Thank you so much for sharing your knowledge .From Sri Lanka .

[@sureshnaidu8227]

In future creative channel be like: Home made time machine with pvc pipe for small time intervals 😂😂😂😂😂

[@rockfertigaus3760]

😁😁😁👍

[@shutdahellup69420]

using 775 motor

[@KyleStevensProject]

Great job, sir. Congratulations on a fun and functional home build! 😊

[@sangtsang7936]

Good success ! Give you some advice. You need a latch switch with a rope attached. When you miss, the motor will stop. The Scooter will not run away.

[@afniarifmuhd02]

hy taik babi lek, comee

[@JuanSchwartz]

Sounds really cool in the water too

[@campingintheforest_]

Nice job and cool idea...

[@rigobertohidalgo2487]

A dead man switch might be a good addition, in case it scapes your grip.

[@DaveSmith-cp5kj]

Also adhesive as the prop guard sounds like an accident waiting to happen. There should be some mechanical fastener to keep it in place.

[@СержантАндриевский]

Парень.. такие выключатели в воде - это как минимум не правильно!!! Но за идею - лайк.

[@УкраїнаУкраїна-е3л]

Тоже чё то смутило

[@volodymyrkuzmychov2907]

Он с азии.Не понимать тебя

[@pedroestrada3378]

Solo le hace falta un poco más de propulsión pero está genial , felicitaciones , excelente trabajo

[@AnimeRecapthatamazeyou]

Now we can make this❤️ Thank you bro🥰

[@Chinkdog1]

Great job.very talented

[@hawthorneodonata3979]

Amazing idea. I could make one for myself now. It's very simple

[@lotusfreestyle1131]

Oh yes how simple ya narcissist

[@TydalWind]

A parts list of the working components would be a real help, particularly the motor/gearbox assembly!!!

[@greenmountainsuriving]

and those fancy props

[@epoylandingin7708]

The motor looks like a motorcycle starter.

[@nickterbrack136]

The components won't work for very long.

[@triplenickle6995]

@@epoylandingin7708 not a motorcycle starter

[@ur9640]

Yes! Like diameter of shaft extensions. Prop sizes and pitch. “The devil is in the details.”

[@onenationunderduress8994]

Am I the only one that enjoys sounds played at high speed?

[@jtveg]

Nice work. Thanks for sharing.

[@alanwareham7391]

Very well done my friend, I’m no engineer but I think that as a means of propulsion it has a lot going for it 👍

[@terrya6806]

Nice idea except the non waterproof switches!! And check out using magnetic couplings for the drive shafts.

[@michaelg48]

Honestly this was pretty cool, a little more work and you could make this pretty flawless. Keep up the good work.

[@cycl0nnus]

awesome!!!

[@dragonden9227]

What if a crocodile comes behind ur ass it looks like philippines submarine missile let it go let's see the bang bang

[@enriquearce7774]

898u8u8

[@এসোআলোরপথে-ধ৩ণ]

J

[@hecticerectic9588]

Take extra batteries if you plan on going from U.S. to U.K. and back. 👍

[@Marss13z]

I wonder how many times he practiced this. Very impressive.

[@rajujotishchetry3274]

Nice video

[@jlucasound]

Awesome builds! You are a braver man than I getting into that water! ;-)

[@georgecolon2361]

Very good invention, but you should install a bracelet cable to turn off the engines if you accidentally let go. something like those used by jet skis.

[@afefbenamor7263]

exate

[@muskangaming1348]

Congratulation for premium subscriber I am very happy to see that

[@Jasmine_2005]

What is that?

[@akash-zg4vj]

@@Jasmine_2005 he meant KZbin premium

[@JoeyBryson]

Awesome build

[@jaydeemorales3842]

The sound of the pipes are satisfaction

[@DSB.TecnologiaMaker]

Que da hora cara, adoro seus vídeos. Desejo que tenha muitos e muitos anos de vida e saúde. Parabéns

[@angiefav1847]

Well don’t your a genius l enjoyed your project sir quite a good design very nice job

[@peaky.beast_]

Congratulation for 3 million🔥🔥🔥 subscribers🎉🎉🎉🎉🎁🎊🎉

[@marioradja5613]

Keren bro....,, maju trus...,,,

[@ronaldbelken396]

That has the potential for so many leisure and military applications that its unreal

[@СемёнАльтов-к3р]

🤔Сантехник от Бога!!! Можно в канализацию установить такие движки, чиркаши-(chirkashi) будут вылетать со свистом!!!☝️🙄

[@fildp1352]

он про чиркаши все-равно не поймет))) надо писать. chirkashi, как раз почти японское слово

[@СемёнАльтов-к3р]

Fil Den, исправил!!!☝️😏😉😆

[@sultonboyisroilov5354]

@@fildp1352 jkjllkj;lkhkjnlkmj

[@СемёнАльтов-к3р]

Sultonboy Isroilov 🤔золотые слова!!!☝️🙄

[@АртёмРодионов-ъ9ф]

@@СемёнАльтов-к3р ну ничего себе высказался))) образованный видно и ник у ребёнка серьёзный)) мамке с бабушкой пожалуйся

[@shperax]

Those motor water seals are super temporary. No way those will last more then 15 min in water. You should have built a housing for a bearing and seal to go in. Then your setup will last for years.

[@satchemo24]

After 6 weeks of arduous toiling in his garage Stanley was bitten in half on his maiden voyage by a hangry gator.

[@denserdeezsignz5498]

Witnesses reported seeing a gator that scoots across the pond when he farts.

[@dubmac6979]

Love the test! Cheers from Ontario 🇨🇦

[@virgorax8411]

German TÜV getting a stroke watching this ;-) Nice work. If it´s working, it´s not dumb. Keep on building.

[@HamzaKermiche]

Congratulations dude you made it, good project and we obviously can say the results are just great

[@vannigiovannigio8861]

Im going to send you some purple primer and red hot.

[@caliguy1500]

Hahaha

[@vannigiovannigio8861]

I knew i wasn't alone with my thoughts.

[@leehunter555]

I like the heavy duty cement myself lol

[@johnny8dog1]

Right? That was a bit to low brow. No shoes is fine but the glue??

[@guwop2234]

that and and a hackzall

[@greenrabbit860]

welp this is going into my survival DIY list. this would be a life saver in a shitty situation.

[@luischocho3613]

U very rite

[@probablynotabigtoe9407]

When would this ever save your life? Seriously write a realistic situation where you would be carrying that thing around.

[@greenrabbit860]

If you have to have me explain that then you wouldn't know survival if it reached up and bit you in the ass. Any tool the helps you exert less energy in a life or death situation is useful. "Just learn how to swim" sure I know how to swim but again if I can save my energy by letting this thing take me to shore I'll do it. It's not lazy its energy conserving.

[@GeRbAnGUjUnGTiMuR]

Good job 👍

[@BangzamChannel_UAE]

WOOW.... Very good idea