DIY SEALED SUBWOOFER BOX BASS TEST AND DEMO - kzbin.info/www/bejne/iYSVdGV4apefpZY
@User6701k24 жыл бұрын
I love ur work brother from India ❤️✌️🙏
@ellisyadav11794 жыл бұрын
Thanks sir
@CHRISB-cb5to4 жыл бұрын
Do you make enclosures to order? I have been searching for a 2x 10 or 12 ported enclosure for a 2016 Chevy Silverado double cab. Or possibly 1 single 10 or 12 ported to utilize the entire underneath of the rear seat. Thanks for your time , and love your videos.
@chrclmnky4 жыл бұрын
@@CHRISB-cb5to Hello Chris, yes these subs I'm building are orders from clients here in the Philippines. Thanks for the feedback.
@Suresh.v6084 жыл бұрын
Wer s Air holes
@reinhardtmaritz76544 жыл бұрын
Love these pioneer subs with the integrated basket. Affordable, look good and perform really well 2 of these in a sealed box would be great
@davinchi24963 жыл бұрын
Nice and quick. All you need is full blown woodworking shop and all of the tooks
@chrclmnky3 жыл бұрын
Yes i agree thanks
@magnuswf4 жыл бұрын
Nice box, and nice detail to router the edge of the endpieces, so you can hide the cloth in there. But I think it would look even better, if you had countersunk the sub, so it is flush with the surface :) and maybe tighter seal around the lip.
@chrclmnky4 жыл бұрын
Thanks for the feedback. :)
@葉蛇3 жыл бұрын
Yes it easy to make because you have tools to deal with. You are professional. Great.
@chrclmnky3 жыл бұрын
yi
@diyexplorer87284 жыл бұрын
Impressive speaker box right there.
@carlosesparzavazquez47534 жыл бұрын
Nice looks good and clean . Nicer than what the stores offer
@chrclmnky4 жыл бұрын
Thanks for the feedback Car-litos.
@DIYAudioGuy4 жыл бұрын
I enjoy your videos, the music and edits are very Zen.
@chrclmnky4 жыл бұрын
Thank you for the feedback, DIY Audio Guy. :)
@onkarsharma16394 жыл бұрын
Your's works is loving ♥️💐👨
@chrclmnky4 жыл бұрын
Thank you so much Onkar. 😀
@edwarddemesa46304 жыл бұрын
Nice wedge type 👍
@aaronjohnvillegas73633 жыл бұрын
Work of art 👍
@chrclmnky3 жыл бұрын
🌞😎
@ufcker9153 жыл бұрын
That song playing in the background is stoopid nice..
@chrclmnky3 жыл бұрын
yuh it iz
@BLICKBEANZ4 жыл бұрын
I need a friend who can make something like this
@Anonymouseys3 жыл бұрын
Or you could buy one 🤔
@Leon-oz4uf2 жыл бұрын
@@Anonymouseys a friend?
@Anonymouseys2 жыл бұрын
@@Leon-oz4uf Yes. I hear all good audio stores stock friends now.
@Leon-oz4uf2 жыл бұрын
@@Anonymouseys 😂
@74midwestbass744 жыл бұрын
NICE VID BRO!!!
@chrclmnky4 жыл бұрын
Thanx!
@СтоунИгл4 жыл бұрын
Работа в удовольствие 👍
@chrclmnky4 жыл бұрын
Thanks
@JorgeMendezTol24 жыл бұрын
Super execele contenido,🎬📽️🎬 wuauuuu!!! 👌🚀Sigan así🚀 y saludos👍😃 desde zapopan jalisco México 😄🙋♂️
@speedpros2 жыл бұрын
You did a good job but you didn't show how you created the angle cuts on the wood, I mean what was this video
@chrclmnky2 жыл бұрын
Hello, angled cuts are a bit tricky. Here's another video of mine showing how it's done. kzbin.info/www/bejne/bIO9lnmMapt8orc
@user-zh7eo2ul2v4 жыл бұрын
Very neatly job! 👍 Box made perfect! 👍 But this subwoofer very very low quality driver! Because this Woofer have very high Fs 46,fantastic high Qts 1.04 and very heavy Mms 123 gr.!!!!!!!😣☹️😞🙁!Very poor Driver!😟😞🙁👎👎👎👎 MR..next time use perfect bass woofer - Seas h1192-08 cd22rn4x, this Woofer have size only 8.5"!!!Very little, but have very low Fs 20 Hz,and Audiophile level Qts 0.24!!!Have very light Mms 41-42 gr.!Amazing woofer!👍👍👍👍👍👏👏👏👏👏But need use two passive radiators tuned 14-16 Hz,because this amazing little woofer have big VAS 108 L. Two passive radiators need for balance diffuser...
@mszeitgeist4 жыл бұрын
Please share the measurement of this sealed subwoofer box.thanks
@babeyouze4 жыл бұрын
I feel it, they're coming. "WHERE IS THE PORTTTT"
@chrclmnky4 жыл бұрын
😂
@therealxree17554 жыл бұрын
I love watching your videos. They’re so satisfying
@chrclmnky4 жыл бұрын
Thanks. :)
@Badassvidsz4 жыл бұрын
Your hands are gold :-)
@chrclmnky4 жыл бұрын
That's new. Thanks for the gold feedback.
@Badassvidsz4 жыл бұрын
You are much welcome dude and have very pleasant hi-fi and not only Christmas Holidays { Christian or not it doesn't matter } Greetings from Greece :-)
@santhoshs48453 жыл бұрын
Pioneer masss 🔥🔥🔥🔥🔥🔥🔥
@marciodasilvalima71054 жыл бұрын
Parabens pelo belo trabalho
@chrclmnky4 жыл бұрын
Thank you Marcio.
@Joey2316104 жыл бұрын
Quick n easy all you need is 5000 dollars worth of tools for a 60 dollar box
@chrclmnky4 жыл бұрын
Yes you are absolutely correct Joy Mermaid. How are the seas and the oceans today?
@SOBR_194 жыл бұрын
Красавчик красиво сделал
@jimboyechavez19874 жыл бұрын
akong gipang download imong mga video idol nindot kaau tan.awon....❤️❤️✌️✌️
@TheBlackz054 ай бұрын
Hi, i would like to fit a kenwood KFC-PS3016W subwoofer (12 inch) into a small ported box and then into a hatchback... how much would i lose by severely undersizing the box? Would it end up sounding horrible? 1st time attempting to build a box, always had pre-fab boxes. Thank you.
@chrclmnky4 ай бұрын
Hello, undersizing the box actually maximizes the output but also heightens the tuning . That is what most SPL guys doing: Undersize the box OR oversize the port to achieve higher tunings (around 45-55Hz tunings) but very loud.
@TheBlackz054 ай бұрын
Thank you very much for clearing this up... i was quite worried its gona end up sounding bad. Im gona go ahead and use an undersized ported box 😊
@vikram65863 жыл бұрын
Maine apna ek handmade speaker bnaya h cpu cabinet m vo project ko aap aur bhi update karke lagbhag 3000 around bech sakte h mere liye vo abhi affordable nhi h or m apna project spoil nhi krna chahta usme 2 satellite or ek woofer lga hua h saath m tda 2030 based amplifier with cooling fan lga hua h bluetooth aapko lgana padega uski sound m distortion nhi h tej karne p bhi clear aati h
@edud84524 жыл бұрын
Very nice your boxes always turn out great! what program are you using for box designs? I use a program called Cutlist Optimizer to lay out all my cuts on a 4×8 sheet it is awesome i hardly have any wasted wood.
@chrclmnky4 жыл бұрын
Thanks Eric. How I wish I could afford a CNC machine and a huge place for it. I use several programs but right now I am loving BassBox Pro 6. It gives out accurate calculations.
@XxTrustNoOnexX4 жыл бұрын
SQ box 👌
@JanisAbols30004 жыл бұрын
Not really Q is 1.3.!!!
@bilalkafeel96664 жыл бұрын
Good man👍👍
@thisisroy18933 жыл бұрын
No pongas música de fondo, el simple sonido de tu trabajo relaja tanto
@chrclmnky3 жыл бұрын
Ok thanks for the advice Roy. Helps a lot.
@adam_1dizon1214 жыл бұрын
another good one bro..
@JoseRoberto-cp9qq4 жыл бұрын
Ficou legal em gostei
@IrshadIrshad-li5zp4 жыл бұрын
Good work 👌
@chrclmnky4 жыл бұрын
Thanks ✌️
@user-gt4pc2fk6y4 жыл бұрын
What are the benefits and reason for putting cotton or wool inside the amplified box
@chrclmnky4 жыл бұрын
Please read other previous comments. Thanks.
@junaidgt904 жыл бұрын
Dude how did u find this amazing sub in NEW condition? Im a big fan of this sub that im using since more than 5 yrs
@chrclmnky4 жыл бұрын
Yes they're very durable and built like a tank. And can produce serious bass. This and big brother 311d4 still available on online flea market here in the Philippines.
@imranpasha49004 жыл бұрын
You have not left air hole
@mmittal4223 жыл бұрын
Bro u r great
@chrclmnky3 жыл бұрын
Thanks Mohit 🤘
@nkm99channel734 жыл бұрын
Anjai alat nya canggih semua coba kalo di bawa ke indonesia pasti bisa viral di kabupaten ku
@grimlord56544 жыл бұрын
kung makaon pa; lamia sa mga toolz ni bossing oi.
@chrclmnky4 жыл бұрын
Matsalams sir. ;)
@laineribeiro21924 жыл бұрын
Nice grapichs broo
@chrclmnky4 жыл бұрын
Thanks.
@feedthemachine994 жыл бұрын
Do all sealed boxes need that much fill.I have a sealed 12 with probably a 1/4 of that fill.?Good vid btw!
@chrclmnky4 жыл бұрын
I think I over filled it. 🙁
@feedthemachine994 жыл бұрын
@@chrclmnky LOL,thanks .
@peterlallas13263 жыл бұрын
When you put that last section on the side why didn't you make it go flush with the rest of the box instead of like a insert, just curious. Wouldn't air escape that unless it went against the other boards?
@chrclmnky3 жыл бұрын
@@peterlallas1326 box is coated with rubber cement so no leaks. Also sealed all the seams inside the box.
@argondigital3 жыл бұрын
Very nice vlog sir I always watch your vlog and enjoy every minute of it. By the way sir kaya nyo po ba gumawa ng 3 way speaker using 12 inch woofer/sub woofer, 6 or 6 1/2 inch mid range and a 1 or 1 1/2 inch tweeter? Parang JBL prx design.😊 if so I would be happy to order a pair po of speaker box with or without speakers.
@chrclmnky3 жыл бұрын
Thank you 😁
@maksrassi4 жыл бұрын
Awesome work dude! Question: is it necessary to fill up the box with cotton?
@chrclmnky4 жыл бұрын
Thanks for the feedback. The polyfiber fill will make the box "bigger" to the subwoofer so low frequencies will be produced lower than the initial box tuning.
@LexiconDevil4 жыл бұрын
I wouldn't reccomend polyphil if you have a high end sub, they tend to heat the coils by a lot, I added some to my box (sealed) and it sounded pretty good but my sub was way hotter than without the phil
@chrclmnky4 жыл бұрын
@@LexiconDevil This sub is not high end. It's low end. Has 47Hz Fs and a QTS of over 1.15. So must fill something to lower the overall tuning a bit.
@LexiconDevil4 жыл бұрын
@@chrclmnky I know that sub, one of my favorite lower end ones, I personally have the diamond audio hxp124, and I was curious to see if polyphil would help it, but it got so hot to the point where the dust cap is untouchable, so I had to remove it in order to get it running again, take note that I only got like 2 layers of it around the walls of the box so it wasnt that much
@maksrassi4 жыл бұрын
Psychedelia not sure what you mean by “high end”, but my sub is Pioneer TS-310S4.
@fatihakay82004 жыл бұрын
Congratulations. Good workmanship. What are the dimensions of the box?
@chrclmnky4 жыл бұрын
Hello Fatih, check in the description for the link to Tinkercad layout and design. Thanks!
@ssempijjaabra97322 жыл бұрын
So nice
@chrclmnky2 жыл бұрын
Thanks
@josegaribay99622 жыл бұрын
Bro all that work and you don’t test it out for us I was looking forward to hear it bump 😔 fail
@chrclmnky2 жыл бұрын
Here's the test - kzbin.info/www/bejne/iYSVdGV4apefpZY
@elsaoliveira12804 жыл бұрын
Ficou top
@TattooHustleOfficial4 жыл бұрын
Grinabe yo 👌🔥🔥🔥
@chrclmnky4 жыл бұрын
😊
@peloteroification4 жыл бұрын
Dude, you should make a copy of the jl audio H.O. enclosure.
@chrclmnky4 жыл бұрын
Tell me more about that enclosure.
@bisayakoyvlog13334 жыл бұрын
Ang liit ng box
@Tevin2542 жыл бұрын
Hi.....I bought pioneer 314d4 I'm planning on using it at home......any ideas on cabinet design whch will give me good bass.
@amthanhkeokeo924 жыл бұрын
Hello in Vietnam
@chrclmnky4 жыл бұрын
Hi. From the Philippines
@amthanhkeokeo924 жыл бұрын
@@chrclmnky Mr linh, âm thanh kẹo kéo
@trev8154 жыл бұрын
Love watching you work ! Any advice on a box and sub which can be super slim ? I hav a powered space saving sub in my van at the min but need more bass so would like to have a proper sub again but space is very tight to get ample cubic feet ! Would probably hav to be an 8" too 👍
@chrclmnky4 жыл бұрын
Many thanks for the feedback, trev815. To get the slimmest box, would be sealed. This one is sealed too, and the box is the smallest I can build. But output still huge.
@CheekyAquarius3 ай бұрын
Thanks for your video. I’m a First time box builder with a jig saw and hand sander, no table saw, chop or miter. Anyway to help keep the cuts straight? Also, thoughts on Mdf vs birch ply? Same price for me locally for a 2x4 sheet. I’m making a 1.0 cube sealed box for a single Dc 12”
@chrclmnky3 ай бұрын
If mdf is same cost as birch, then go for the birch. Mdf here in the Philippines is very cheap by the way while high grade plywood are a luxury. Get a straight edge and use it as guide against the jigsaw. You might want to screw down halfway that wooden straight edge guide.
@TruthTree-ls5iiАй бұрын
Get table saw, is the best saw.
@fernandoperilo28 Жыл бұрын
very nice!
@chrclmnky Жыл бұрын
Thanks a many, Fernando. 🤘😎☀️
@drrckhamilton4 жыл бұрын
Do the nails hold the enclosure together well without any problems? What about a heavy duty subwoofer?
@chrclmnky4 жыл бұрын
Glue and pin nails are good for boxes with subwoofers having a power up to 1000w RMS. More than that should be of some industrial strength materials.
@gewilrepa4 жыл бұрын
Hello friend, a query, because it presents the fabric inside the box. what is the function of the fabric
@chrclmnky4 жыл бұрын
Hello Elmer, poly fiber fill makes the box appear "bigger" to the subwoofer, lowering the overall resonance frequency.
@gewilrepa4 жыл бұрын
@@chrclmnky Excellent. Thanks friend for your quick and efficient response. I'll keep watching your videos and of course learning.
@brayanphyyytt444morales54 жыл бұрын
Muy buen video bro cual es la app para sacar las medidas de un cajon
@chrclmnky4 жыл бұрын
Thanks for the feedback sir. The app is tinkercad. You can copy and edit the same layout and design. There is a link in the video description.
@bokrard3 жыл бұрын
Nice one sir! Kapag sealed box po ba kailangan ko gumamit ng subsonic filter? DS18 SLCMD12.4 D 250w RMS po sub ko then naka set ang gain ko ng 22.3 Volts lang gamit multimeter. Amplifier ko naman po ay LL Mono 1000w.
@harjotkhatrao69423 жыл бұрын
Little spark in subwoofer and the box will be on fire 😂😂
@preetlehal56143 жыл бұрын
Aaag lgaa di bhai
@waqaraskari23654 жыл бұрын
Good sir💯👍
@idontcaresapo82333 жыл бұрын
I thought you can touch the filling with the sub since it can get trapped in the motor of the woofer. Is that true? I'm thinking to the same
@chrclmnky3 жыл бұрын
That is just a theory.
@dumitriuvlad4818 Жыл бұрын
great work !! what's the song in the video?
@chrclmnky Жыл бұрын
Thanks. Tracks are in the video description
@dumitriuvlad4818 Жыл бұрын
@@chrclmnky i think you missed adding the track for this video because it's not in the video description. please give the track id
@Fire01010114 жыл бұрын
Do you have to fill it up .. how does that help ??
@chrclmnky4 жыл бұрын
Hello Richard, the polyfiber fill makes the "bigger" to the subwoofer.
@lemniscate22184 жыл бұрын
Amazing
@just_venky93944 жыл бұрын
Bro no air hole ..does it hurts the spkr and it's performance
@chrclmnky4 жыл бұрын
Sealed boxes are actually good for subwoofers.
@mustseenow9913 жыл бұрын
if I dont have carpet could I wrap my wooden sealed subwoofer box with soundskin/dynamat/automat material instead? Would that improve sound?
@chrclmnky3 жыл бұрын
Carpet does not improves sound. Just for aesthetic.
@nguyenquang16704 жыл бұрын
👍
@bharatprajapati5034 жыл бұрын
Super
@_Thale_4 жыл бұрын
The wiring connection to the sub please specify how you did it these dual Vcoils can be confusing
@chrclmnky4 жыл бұрын
Just parallel wiring to get a 2 Ohm final impedance.
@ni3walia3153 жыл бұрын
Really soo cool , i have also sealed enclozer . Why u put cotton in the box ?
@chrclmnky3 жыл бұрын
I like the ghosts inside the box more comfy.
@sigitsantoso78904 жыл бұрын
keren bang, , , ,pengen bisa buat gitu bang
@chrclmnky4 жыл бұрын
Yes you can. 😇
@MegaBigbizz4 жыл бұрын
That's a nice box bro are you taking orders?
@chrclmnky4 жыл бұрын
Yes sir but for clients around the Philippines only.
@nfak_mr3 жыл бұрын
Is sapecker ka name keya ha yeh Pakistan me mil jae gy reply zaroor Dena shukrya
@jerrygonzales28604 жыл бұрын
Saan po pwede ikabit ang sub woofer sa amplifier? Unit ko po ay sakura av-5ub. Ang gagamitin ko na sub ay galing sa aiwa component.
@turebekreymov39814 жыл бұрын
Good man
@Simelmunduiyaapnasong55303 жыл бұрын
Kimat kitna hai babu ji ...good morning
@redpix32643 жыл бұрын
Question: Are the nails more or less efficient than screws? Asking because in doing my research to build my on box, I read that screws would be better. Thanks
@chrclmnky3 жыл бұрын
Small box = nails be fine
@redpix32643 жыл бұрын
@@chrclmnky Thanks!
@daggieboitv91933 жыл бұрын
Boss.. yn ba ung deep bass na 2nog? Ok rin ba pag serries gamit pg deep bass?
@ortiztaxi10553 жыл бұрын
What type of wood did you use and what are the other materials for the box that you used? Such as the glue and the inside for the sound barrier aswell the wire connectors?
@chrclmnky3 жыл бұрын
Hello Heriberto, the wood is just an MDF.
@ortiztaxi10553 жыл бұрын
What do you mean? Sorry I am confused. I am a mechanic and mainly a do-it-yourselfer when it comes to automotive. I prefer to make my own box and install it myself then pay an arm and a leg for someone to install it.
@satidog3 жыл бұрын
@@ortiztaxi1055 en.wikipedia.org/wiki/Medium-density_fibreboard It's cheap and available at any lumber place. Even most high end speakers are made from MDF.
@cristianspiezio26134 жыл бұрын
Un altoparlante così meriterebbe una cassa armonica più sovvisticata
3 жыл бұрын
Top muito profissional!
@chrclmnky3 жыл бұрын
Many thanks to you Alecio.
@RichardTakacs Жыл бұрын
Hello, I need help, which is the best box for the pioneer ts-w304r speaker? Or could you show and tell?
@chrclmnky Жыл бұрын
You can copy this
@user-kf7gj1eb2s4 жыл бұрын
Супер)))
@mjshow174 жыл бұрын
sir pwede rin ba to pang bahay ipapartner ko sya sa edifier r1700bt?
@DaandZ70954 жыл бұрын
Servisce Top. Mais kd o Dulto?
@chrclmnky4 жыл бұрын
Sealed
@dubailife7814 жыл бұрын
Grupo kalmado hehehe
@devidayalravbauddhajee4663 жыл бұрын
Nice
@chrclmnky3 жыл бұрын
Thanks
@salvegeral73933 жыл бұрын
in Brazil we have a technique to have more serious we use the cotton maze
@chrclmnky3 жыл бұрын
nice
@akolngto93143 жыл бұрын
@@chrclmnky so, boss pwd seguro gapas sa doldol no? Hehhe kay in ana man si ilaha dw
@chrclmnky3 жыл бұрын
@@akolngto9314 oo pwede ra man. Para mas barato kanang polyfiber sa unlan.
@respectedsir15704 жыл бұрын
I want same box and if the cottons gets inside the coil area will it burn ?? Any idea is it safe
@chrclmnky4 жыл бұрын
No it won't get inside the coils. Don't get too crazy about stuff.
@achu__mnr25423 жыл бұрын
Bro place evida
@mahendrsing13904 жыл бұрын
Nice bhai
@chrclmnky4 жыл бұрын
Thanks Mahender.
@gamingwithsunny65544 жыл бұрын
What is the name of the black material are you used to totallycovered the sub woofer how much that price
@chrclmnky4 жыл бұрын
Subwoofer carpet, charcoal black.
@RileyRides3 жыл бұрын
Why does the sub box get filler will fluff?
@chrclmnky3 жыл бұрын
To make the box appear bigger to the sub.
@RileyRides3 жыл бұрын
@@chrclmnky ok thanks
@EddySVT3 жыл бұрын
Hello charcoal monkey love your videos at what angle do you make the cuts that attach to the front panel of the box? Thank you
@chrclmnky3 жыл бұрын
Watch this video to know how i measure and cut the angle - kzbin.info/www/bejne/pHu1g2SFat-pgck
@EddySVT3 жыл бұрын
@@chrclmnky thank you kindly love you videos maybe one day you can build a 8 or 10 kicker q Class L7 and see how good and hard they hit😎🤙🏼
@muzikamusicserieschannel13914 жыл бұрын
The tape u stick on circle of box is wrong..... its used on subwoofer.👍☺
@chrclmnky4 жыл бұрын
Still the same sealing properties.
@muzikamusicserieschannel13914 жыл бұрын
@@chrclmnky okay ☺ but This tape is always pasted on subwoofer ..many people make mistake 👍.
@fortres0084 жыл бұрын
@@muzikamusicserieschannel1391 Dude still airtight
@chrclmnky4 жыл бұрын
@@muzikamusicserieschannel1391 Ok thanks for the advice.
@whaky86453 жыл бұрын
Hey jus asking what's the paper n stuff ya stuffed in the box for ?
@chrclmnky3 жыл бұрын
Hello GV, that was polyfiber fill used to stuff pillows and teddy bears. It is used to trick the subwoofer to make the box bigger, therefore lowering the resonance frequency.