How to Make Series Parallel Testing Board wiring connection.

[@RAIPUR420]

Very Nice Videos upload sir

[@RAJPUTTECHNICALJSR]

Thanks

[@DilipsinhGohil9009]

बहुत ही बढ़िया

[@RAJPUTTECHNICALJSR]

आपका बहुत-बहुत धन्यवाद

[@DilipsinhGohil9009]

@@RAJPUTTECHNICALJSR भाई जी वैसे तो ये बोर्ड बिल्कुल सही बनाया है आपने, लेकिन एक सामान्य व्यक्ति जो आपसे सिख कर अपने घर पर इसे बनाना चाहता हो उसके लिए आप इसी बोर्ड में एक सिंगल पोल MCB को जोड़ कर एक नया वीडियो बनाए जिससे कोई भी शिखने वाले से अगर कहीं गलती होती है तो बोर्ड में लगी MCB ट्रीप हो जायेगी और शोक सर्किट का डर भी नहीं रहेगा।

[@parasramdiwan]

Super nice video sir

[@RAJPUTTECHNICALJSR]

Thanks

[@HafizurRahman-mw8bp]

You are brilliant. Crystal clear tutorial information.

[@RAJPUTTECHNICALJSR]

Wow, thank you!

[@headway19]

Very Nice

[@RAJPUTTECHNICALJSR]

Thanks a lot

[@umarrahmat8624]

Nice

[@RAJPUTTECHNICALJSR]

Thanks

[@susheesimplelife6957]

Very nice 👌

[@RAJPUTTECHNICALJSR]

Surashree Paul, Welcome comments.keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching video.

[@mohan.celectricalmoni7878]

Good job sir

[@RAJPUTTECHNICALJSR]

Thanks

[@chavvakrishna7015]

Super

[@RAJPUTTECHNICALJSR]

Thank you so much

[@sunilraval3889]

Very fine comments

[@RAJPUTTECHNICALJSR]

Thanks

[@ari91629]

Bahut acha video wid gud explanation.

[@RAJPUTTECHNICALJSR]

abhijit choudhury Comments welcome. Thank's for watching video and always stay with us.

[@kavayathecrazygirl6103]

very nice video sir and explanation

[@RAJPUTTECHNICALJSR]

mewadawala ravi kumar, Thank's for the appreciation. keep watching our videos for more knowledge and always stay connected with our channel.

[@manikandant3743]

Good

[@RAJPUTTECHNICALJSR]

Thanks

[@bhaskarakerkar9495]

I had made series board as per your instructions. Thank a lot. Your guidence is very simple in laguage to understand like me having no knowledge of electricity thanks once again.

[@RAJPUTTECHNICALJSR]

Thanks for the appreciation. Keep watching and sharing our videos. Always stay connected with our channel for more knowledge.

[@maapurnamasi1992]

Sir supar

[@RAJPUTTECHNICALJSR]

Thanks. Keep watching and sharing our videos. Always stay connected with our channel for more knowledge.

[@gpatakakhajanaka5504]

Nice Vdo sir and nice Collection

[@RAJPUTTECHNICALJSR]

Raj Kumar, Thank a lot.

[@roshanrajput519]

Very nice Video sir

[@RAJPUTTECHNICALJSR]

rahul thakur, Thanks.

[@vinitkadam9334]

I just made a simple series parallel board including fuse... the board really looks cool!🔥♥️

[@RAJPUTTECHNICALJSR]

Nice work!

[@jesusmylord625]

Aap diagram draw karke bataye aur series ke liye two pin ka istemal karke video banaye taki koi khtra na ho 👍

[@RAJPUTTECHNICALJSR]

Ok. Thanks for watching.

[@shekarr5109]

Good I done it.......

[@RAJPUTTECHNICALJSR]

Thank you so much. Keep watching and sharing our videos. Always stay connected with our channel for more knowledge.

[@RaahilOfficial]

Thanks sir Aapne Bahot Ache Se Explain Kiye Hai.., Mera 1 Doubt Hai, Ke Hum Yaha Par 200 Watt Ka Bulb Q Lagate Hai, 100 Watt Ka Q Nahi

[@RAJPUTTECHNICALJSR]

Aap ka bahut bahut dhanywad Iss per ek video banaker detail mein samjha dunga

[@RaahilOfficial]

@@RAJPUTTECHNICALJSR Okk Sir Thanks

[@nayandave5297]

Sir, I understand use of 5 pin socket below bulb holder. But I couldn't understand the use of another 5 pin socket below inductor, please explain.

[@RAJPUTTECHNICALJSR]

Indicator shows power supply is on and another 5 pin socket is normal AC mains socket

[@batistafrose6009]

Nice video

[@RAJPUTTECHNICALJSR]

Thanks

[@abbuabbualfaz6948]

Thanku u Sir

[@RAJPUTTECHNICALJSR]

Welcome

[@yaseermashal6291]

very nice

[@RAJPUTTECHNICALJSR]

Yaseer Mashal, Thanks. Keep watching stay tuned.

[@sayedpashasaidu6085]

Nice sir tq

[@RAJPUTTECHNICALJSR]

Thank you so much. keep watching and sharing.

[@sajjadmd9642]

Bahut achchha hain video sir ji

[@RAJPUTTECHNICALJSR]

sajjad md, Thank you very much. keep watching our videos for more knowledge and always stay connected with our channel.

[@arunpavan5597]

Out come wires plug

[@SujeetKumar-dx4me]

Nice explanation

[@RAJPUTTECHNICALJSR]

Sujeet Kumar, Thank you very much. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@binaykradak3668]

Thanku Sir

[@manikde4482]

U have described very nicely with detail, taking each point carefully. Also cautioned us about safety.

[@RAJPUTTECHNICALJSR]

Thank you very much. keep watching and sharing.

[@nkr2110]

Very nice sir

[@RAJPUTTECHNICALJSR]

Welcome. keep watching and sharing.

[@kalanithya4321]

Security lapse is observed while testing bulbs. They should be kept inside a small card board box like their packing etc so that the terminals can be touched with wire without any fear of shock

[@RAJPUTTECHNICALJSR]

KALANITHY A, Thanks good suggestion given by you. I agree with you so please keep support our channel and keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@SudhirKumar-ko2yc]

Thanks you sir

[@RAJPUTTECHNICALJSR]

Welcome comments. Keep watching and sharing our videos. Always stay connected with our channel for more knowledge.

[@amarnathsriperumbudur]

I would like to appreciate you for the clear description and for more ease, if you connect it while explaining would be more comfortable for laymen.

[@RAJPUTTECHNICALJSR]

Thanks for your appreciation, I will keep this in mind while making my next video.

[@vasutamil3587]

நன்றி சார். (Thank you sir)🙏

[@RAJPUTTECHNICALJSR]

Welcome comments. Keep watching and sharing our videos. Always stay connected with our channel for more knowledge.

[@roshanrajput519]

No 1 series board

[@RAJPUTTECHNICALJSR]

rahul thakur, Thanks for the appreciation.

[@suryakantkaushik9447]

Nice sir

[@RAJPUTTECHNICALJSR]

Thanks keep watching and sharing.

[@suryakantkaushik9447]

@@RAJPUTTECHNICALJSR ok and rater machin ki jankari dena sir

[@dikshauikey4702]

Thanks sir

[@RAJPUTTECHNICALJSR]

Diksha Uikey, Welcome comments. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@ratnakarsalian925]

Seris bord ke liye kitna mm voiyar laga na hai 50mm voiyar chalega

[@RAJPUTTECHNICALJSR]

1.5 mm prayapt hai

[@dheerajkushwah8296]

hello sir

[@alisheikh7110]

Nice video Sir

[@RAJPUTTECHNICALJSR]

Ali Sheikh, Welcome comments. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@manojitkora9166]

Good Video sir/////

[@Suman_raii]

Good

[@samit0079]

Sir aap series circuit ka test kya but parallel circuit kis liye hai ???

[@RAJPUTTECHNICALJSR]

Kharab upkaran jab repair ho jata hai toh use ham parallel socket mein chala kar dekhte hai ki veh theek tareh se kam kar raha hai ki nahi. Thanks for watching.

[@rajshah7918]

Simple series board.here neutral wire has been used in series socket whereas most of the series circuits phase wire is used for series socket. Can you explain v why? Or what difference does it make. It is good if you reply to acquire more knowledge.

[@chandanbhardwaj7992]

Sir kya three plug dena zaruri hai? I mean earthing

[@RAJPUTTECHNICALJSR]

Series ke liye three pin socket aur usmein earthing dena jaruri nahi hai lekin parallel mains three pin socket mein earthing dena jaruri hai

[@chandanbhardwaj7992]

Thank you sir Mai aur mere papa 2 din se Tubelight lekar pareshaan the subkuch kiya lekin nahi jal raha tha Tubelight to mujhe laga ki chock kharab hoga kal apka video dekha series ckt banaya aur test kiya chock ko aur vahi kharab tha Such bolu to maza aah gaya test board banakar 😅 Thank you so much ❤😊

[@dheerajkushwah8296]

sir aap ek eaisa series board banaye jisme ac-volt meter , fuse,indicater ho

[@RAJPUTTECHNICALJSR]

Okay koshish karunga

[@taposmukherjee3133]

Sir please make a video on Transformer and Motor Winding.. Your way of explanation is too good..

[@RAJPUTTECHNICALJSR]

TAPOS MUKHERJEE, Thanks a lot. Of course I will make a video on this topic. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@ratnakarsalian925]

Ratnakar series bord vayar + - Mai Ratnakar

[@sushilharsana]

Sir 3 phase ki simarsibal motar kasa chak karta ha

[@saudkhan3001]

Sir single phase ko double phase me kaise badle.

[@jagdishaneja3409]

Aapne Board Theek Design Kiya Hai. Adhiktar Designers Ne Bulb Holder ko Direct Nuteral De Diya Hai Aur Phase Switch Ke Through Diya Hai. Series Side Ke liye Konsa Adhik Uchit Hai? J.C. Aneja

[@nileshkher3599]

jay rajputana

[@RAJPUTTECHNICALJSR]

Thanks keep watching and sharing.

[@rajshah7918]

Here also you have taken neutral wire in socket for series connection. Why? Can you reply reasons for that?

[@itsakshay363]

Holder me black konasa hai phase ya newtral

[@gokul1801]

Can we check battery using this circuit sir pls reply me

[@skrafee21]

Sir Series board ka length and width bathadijie

[@hiralaljaiswar1634]

Sirji board ka switch off rhna chaiye isme to on karna padta hai

[@RAJPUTTECHNICALJSR]

Yadi series testing socket ka switch off rahega toh socket mein supply nahi milegi aur ham testing nahi kar payenge

[@binaykradak3668]

Discus with MCB time -A,B,C,D. MCB or load

[@mohdimran3992]

thanks very nicely

[@RAJPUTTECHNICALJSR]

Mohd Imran, Welcome comments. thank's for watching video. keep watching our videos and stay with our channel.

[@loveshelar4943]

Mohd Imran muje penal box sikana he

[@s.k.6895]

Sir 2nd socket ka use kaise karen?kya main 100 watt ka balb use kar sakta hoon?

[@RAJPUTTECHNICALJSR]

2nd socket mains AC supply socket hai jise normally AC supply socket ki tareh use karte hai aur 100watt ka bulb aap series socket mein use kar sakte hai

[@rajshah7918]

Let me know how in series socket only neutral connection is? Some other author has shown only phase.what is the correct rule for series socket? That author has stated that only phase should be connected in the socket. Please clarify.

[@samnat7210]

Series board Kaise chalaya sar

[@RAJPUTTECHNICALJSR]

Channel per visit karen sab clear ho jaega

[@rajshah7918]

Reply me if a good device is erroneously connected to series socket, will it work or damage the device.

[@RAJPUTTECHNICALJSR]

It will work there are no damage in the device

[@santoshsannu4958]

Very nice sir aapke is jaankaari se hmm bord bna kr koi bhi electronic item check kr sakte hai or jyadatar to LED bulb...#thankyou sir "Mai santosh Sannu" sir mai bhi Electronic mistri hu dukan hai sell or repair dono karta hu or aapke video se mujhe or bhi jyada jaankaari milegi... Sir send me contact no.plzzz

[@RAJPUTTECHNICALJSR]

Thanks

[@akps7960]

LED ka smd check Karne ke liye kitne watt ka bulb seris bord me lagaye

[@RAJPUTTECHNICALJSR]

LED Bulb ki smd led series se check nahi ki jati hai iske liye multimeter ya jitne volt ki smd led hoti hai utne volt ki dc supply se check ki jati hai

[@Svprasad123]

Series socket me earth add kiya tho kya problm hoga

[@RAJPUTTECHNICALJSR]

Series testing socket mein testing ke liye 2 wire ki jarurat hoti hai earthing ki jarurat nahi hoti hai

[@Knight_Riders_4321]

भाई मेरा बोर्ड पहले चल रहा था अब नहीं चल रहा है शॉर्ट सर्किट हुआ था जब खोला तो तार नहीं जली थी अब कैसे करू ठीक क्या मेरे बोर्ड की जो तार है वो तो खराब to nahi हो गई ! पावर प्लग भी ठीक है

[@headway19]

SIR I WANT TO ADD ONE MORE HOLDER ABOVE THE SERIES LAMP TO RUN ON MAINS. CAN I GIVE THE CONNECTION FROM THE MAINS SWITCH ?????? AND WHERE TO TAKE THE NETURAL FROM, AND WILL IT BE OKAY TO USE THE SECOND HOLDER WITH LED BULB WHILE DOING SEREIS TESTING??????? THE REASON I WANT TO THIS IS TO HAVE LIGHT WHILE WORKING. AND ALSO IF I REPAIR A LED BULB IT CAN BE CHECKED ON THAT IF IT IS WORKING OR NO. PLS SUGGEST

[@RAJPUTTECHNICALJSR]

Yes you can add 1 more holder and 1 switch now phase wire connect through switch to holder and neutral wire connect with holder direct

[@headway19]

@@RAJPUTTECHNICALJSR Thank you Sir

[@akashtk6523]

Sir bahaut acha par ,,lastaka earthing cheak ka thoda or bataye na ,,o bulb glow kaise huwa sirf one wirese obhi....

[@RAJPUTTECHNICALJSR]

Akash Kamble, Aapka bhahut bhahut dhanyawad. Earthing ka bada wala pin press ki body se connect rehta hai. test lead ka ek wire Earthing pin aur doosra wire press ki body per rakhne se test lead aapus mein connect ho jati hai kyoki press ki body aur Earthing pin aapus mein judi rehti hai isliye series bulb test lead se series mein jude rehne ke kaaran glow karne lagta hai. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@akashtk6523]

Thank u sir

[@binaykradak3668]

Nuttral ko Earth as cannced kadiya to my hoga . Vedio this

[@headway19]

Sir the series testing board which I made after looking at your video has phase coming in netural side also My wall sockets are ok What could be the problem?

[@RAJPUTTECHNICALJSR]

Video ko dubara pura dhyan se dekhen aur check karen wirin me kuchh galti horahi hogi use theek karen

[@shyambabushah259]

Series board me kaun sa wire ko direct holder me or kaun sa wire ko switch se pass karna chahiye...

[@RAJPUTTECHNICALJSR]

Aap video ko pua dhyan se dekhen clear ho jayega

[@sharifulislam5846]

How to make series board with one indicator,2 two pin socket and 1 three pin socket and two switches in a single board?

[@binaykradak3668]

3Phase ka test lamp ka baramya batyay​

[@RAJPUTTECHNICALJSR]

Binay kr Adak, Iss topic per ek video bana doonga. channel ke santh bane rahiye video dekhne ke liye dhanyawad.

[@mdsk9056]

jab koi bulb ko ap test kar rahe hain series main wo to sirf neutral ko experience kar rahe hain,to fir bulb kaise glow ho raha hain.Plz thoda details main batayenge

[@RAJPUTTECHNICALJSR]

MD SK, Series testing board ke series socket se test lead ke through ek sire per neutral aur doosre sire per series testing board mein lage bulb ke through phase milta hai. Jab ham test lead se kisi bulb ke terminal ko test karte hai toh bulb sahi hone per terminal per phase aur neutral milne se bulb glow karne lagta hai. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@vinsu121]

Sir can we use 100W bulb instead of 200W?

[@RAJPUTTECHNICALJSR]

Yes you can. Thanks keep watching and sharing.

[@vinsu121]

Thx and Welcome

[@how2engineers390]

yes u can use 100w

[@sajjadmd9642]

Sir Arth nhi Dene se kuch hoga ?

[@RAJPUTTECHNICALJSR]

sajjad md, Yadi ham kissi upkaran ko Earth nahi denge toh uss upkaran ki metal body me current leakage hone per hame shock lagne ka khatra rehta hai. Safty Electrical evam Electronic upkaran ko Earthing dena zaruri hota hai. umeed hai ki ab aap samajh gaye honge. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@dilipdashore1306]

aapne dusri side andicater ke niche wali test nai bati

[@RAJPUTTECHNICALJSR]

Indicator ke niche wala socket parallel mains AC socket hai jisme koi upkaran repair hone ke bad check kiya jata hai ki veh mains per sahi kam kar raha hai ki nahi isliye hota hai. Adhik jankari ke liye aap hamare channel ke santh bane rahiye. Hamare videos dekhte rahiye unhe share kijiye. video dekhne ke liye dhanywad.

[@challengingsuccess6912]

Green wire kisme jode

[@RAJPUTTECHNICALJSR]

Nawdip Kumar Dey palojori deoghar, Green wire Earthing ka wire hai use ghar mein jo Earthing wire aati hai usme jode. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@binaykradak3668]

Siri's testing bord ma phase Ko lamp ka poor sa la yea direct la

[@RAJPUTTECHNICALJSR]

Binay kr Adak, Matlab?

[@anilkumarjangbahadu229]

What is difference practically in parallel ans series connection....why parallel is used for testing

[@divyanshsao9380]

Only 200 wt bulb

[@abdulkhalkd8301]

Sir parallel and series me kya antar hota hai ye jaroor bataye #House wirring parallel or series kise kiya jata hai

[@RAJPUTTECHNICALJSR]

Abdul Khalkd, Parallel circuit mein current distribute hota hai aur voltage same rehta hai. Jabki series circuit mein voltage drop hota hai aur current same rehta hai. House wiring parallel mein ki jati hai. Iss topic per ek video bana doonga. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@muhammadsaeed3854]

Very nice informative video I like it very much but video quality is so poor not clear.... please you improve the video quality...like high HD resolution must.... thanks From Pakistan

[@RAJPUTTECHNICALJSR]

Muhammad Saeed, thanks allot. nice suggestion. I will do it better in future. keep watching our videos and If you like our videos you can help us spread the knowledge through share our videos and always stay connected with us.

[@muhammadsaeed3854]

RAJPUT TECHNICAL why not my respected sir I will always be in touch with you ahead..... upload the solar panels system completely installation video.... thanks once again.... from Pakistan.

[@RAJPUTTECHNICALJSR]

Muhammad saeed, Ok I will try to make a video on this topic in future. Thank's

[@muhammadsaeed3854]

RAJPUT TECHNICAL bundle of thanks...Sir

[@binaykradak3668]

Sir apna phase Ko lamp ka opor sa Liya ha Manai nuttral Liya to keya hoga

[@RAJPUTTECHNICALJSR]

Binay kr Adak, Aap neutral ko lamp se le sakte hai lekin phase ko hamesha switch se lena chahiye nahi toh series socket mein hamesha phase milta rahega jisse current lagne ka khatra hamesha bana rahega. channel ke santh bane rahiye video dekhne ke liye dhanyawad.

[@sagiransari4587]

Sir parallel me se hum kya kar sakte hai

[@RAJPUTTECHNICALJSR]

sagir ansari, Series mein jab kharab upkaran ko check karne ke baad jab use theek kar liya jaata hai tab use ham finally parallel supply jo ki normal supply hoti hai usme upkaran ko chala kar dekha jata hai ki veh properly kaam kar raha hai ki nahi. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@binaykradak3668]

Konsa testing ma 100watt ka lamp chahiya Or konsa testing ma200watt ka lamp chahiya.

[@RAJPUTTECHNICALJSR]

Binay kr Adak, Series testing mein normally 100watt ke lamp ka use kiya jata hai lekin kabhi kabhi load ke hisab se proper testing ke liye alag alag watt ke lamp se testing ki jati hai. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@jeetuverma3461]

Why two three pin socket. Which one for siries checking & other one for what?

[@RAJPUTTECHNICALJSR]

Jeetu Verma, pair of three pin sockets are there because one is for series socket [on the extreme left] and other one is for parallel socket [on the extreme right] in series testing socket we use test lead to test faulty equipment and in parallel socket we test equipment which were repaired to know that they are working properly or not. I hope you have understood. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@binaykradak3668]

Mara comments ka jawab nahi diya app

[@RAJPUTTECHNICALJSR]

Binay kr Adak, Comments ???

[@mahegopisivareddy4443]

what is the difference between 200 watts bulb and 15 watts CFL bulb? when we testing the 15 watts CFL bulb,the 200 watts bulb will not glow but 15 watts CFL bulb will glow only with neutral connection how it is possible with only neutral connection. please explain that process?

[@RAJPUTTECHNICALJSR]

Mahegopisiva Reddy, Mainly Wattage difference and internal resistance of both 200w series testing bulb and 15w CFL bulb. So in the CFL testing the 200w testing bulb will not glow but 15w CFL bulb will glow. If you see the video Properly the phase will come from switch to series lamp than reach to one terminal of series socket and neutral will reach direct other terminal of series socket. I hope you have understood. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching video.

[@harinukala9770]

please tell me Guruji Series Parallel Testing Board Circuit Diagram ( HINDI ) PART - 2 detail diagram and step by step procedure video

[@RAJPUTTECHNICALJSR]

hari nukala, I will make avideo on this topic. keep watching our videos for more knowledge and always stay connected with our channel. Thanks for watching.

[@moosakutty1235]

hari nukala borvelw

[@saee.1234]

Single phase motor ko capacitor kyu use karte he.

[@RAJPUTTECHNICALJSR]

Sunil Gaikwad, Single phase Induction motor self starting nahi hoti use self start banane ke liye capacitor ka use kiya jaata hai. Capacitor ko auxiliary winding ke series mein laga kar use 90 degree phase shift kiya jaata hai jisse starting torque develop hota hai aur motor start ho jaati hai. adhik jaankari ke liye aap hamare videos dekhte rahiye aur hamare channel ke santh hamesha bane rahiye. video dekhne ke liye dhanyawad.

[@skrafee21]

Kitana size Ka board lena Chahiye or boardka length sir

[@RAJPUTTECHNICALJSR]

Sk Rafee, Series Parallel Testing board banane ke liye 8x10" size ka board lena chahiye yeh Perfact size hai. video dekh ne ke liye dhanyawad aur adhik jaankari ke liye aap hamare channel ke santh hamesha bane rahiye.

[@sayyadarshadali8930]

Maine banaya hu ye, connection jaise bataye waise hi kiya but connection ke wire kahi 2.5mm multiple core ka use kiya hu to kahi single core Cooper wire. Indicator jal rha h par Series ka socket test se pehle, bazu wala socket check kiya hu 2 pin bulb holder lgakr to work nhi kr rha, kya kru?

[@RAJPUTTECHNICALJSR]

Video ko ek bar dubara se poora dekh len aur connection ko achhi tareh se check kar len

[@sayyadarshadali8930]

Check kiya sir, wire b sahi hai multimeter se check kiya. Can i whatsApp u

[@assamesgamer8619]

Camera tu dhank se dekhaow

[@Ankit_M]

Sir Series Connection Nutral wire me kr skte he ya Fase me se.

[@RAJPUTTECHNICALJSR]

Ankit Motghare, Series socket ke ek terminal per neutral wire connect karte hai aur doosre terminal se series lamp holder ka ek terminal connect karte hai aur iske doosre terminal per ek one way switch ke dwara phase wire connect karte hai. video dekhne ke liye dhanyawad. hamare channel ke santh hamesha bane rahiye.

[@binaykradak3668]

Ankit Motghare same to you

[@sumaiyalaskar4496]

Please Janab apna content no miljaye too.

[@reshmanizami8947]

Adteinf ja varar garorehai

[@reshmanizami8947]

Shsk

[@RAJPUTTECHNICALJSR]

Reshma Nizami, I Couldn't understand

[@bibhuprasadtripathy9655]

Good video

[@RAJPUTTECHNICALJSR]

Thanks for the visit