HOW TO MAKE SKATEBOARDS | Full Production

This video is all about HOW SKATEBOARDS ARE MADE! Enjoy the complete factory process of building a board starting with the single veneers through the whole production to the finish and sealed skateboard deck with a graphic on it.
In this video we take a look into the manufacturing of the Vamos Skateboards' "Standard" Decks MADE IN CANADA by ControlMFG.
Have a good one guys and thanks for the amazing support :)
► WE CAN SHIP WORLDWIDE! Just hit us up ;)
► Follow Vamos on instagram: / vamosskateboards
► Follow ControlMFG on instagram:
/ controlmfg
► SHOP & WEBSITE: www.vamos-skateboards.com
► Facebook: / vamosskateboards
► Get in contact with us: E-Mail: [e-mail]
► You get to see the production of the Vamos Standard decks in this video
If you liked this video, give a thumbs up and subscribe to the channel for more uploads like this ! Make sure to hit the notifications-bell if you haven't already ;)
NEW UPLOADS EVERY DAY!
😃 SUBSCRIBE ► tinyurl.com/y9zhnbwh
Follow on Facebook:
► / raschkafilms
► / vamosskateboards
Instagram ►@raschkafilms
#Skateeverydamnday #Skateboarding #skateboardproduction #vamosskateboards #pushskateboarding #stayvamos

[@RaschkaFilms]

Enjoy some more skateboard printing footage here: kzbin.info/www/bejne/jnW3l3eXaNp2rJI

[@palmtree8604]

Now THAT is a job with purpose.

[@MaXaNoMaLoUs]

Oh my that was satisfying! I swear I love this as much as looking at a Hotrod or a guitar or any craftsmanship. The curves of a skateboard are soo sweet. Since we don’t have SK8TV anymore, this was a great refresher.... and what a run at the end there!!🤘🏻🤙🏼👍🏼

[@JohnCena-ng8sn]

The guy at the end ... He is a "tester" What a job, enjoying new skateboards every day 😍😢

[@WolfWould]

Whoah I see now how certain boards have a tiny bit more or less concave depending on its position in the stack. I thought pros would talk about how they choose their personal decks before, more in the 90's really. I love these kind of videos

[@Dawer8D]

How they do the trucks? Thanks for share

[@dudeinthehood6280]

I watched this before in skate 3 opening video.

[@50ksavagegoodsavage4]

Bigfoot: sweet And that part where that guy was licking off that white stuff😂😂😂😂😂

[@rickybobby9280]

Nice run at the end 👍

[@SkateMigs]

I loved this. Showed me new equipment & steps that aren’t shown in other bids

[@baro.e]

wow!! amazing!

[@Sheenoobie]

Such an interesting video(: been skating off and on for over 15 years now and always wondered how they made decks. My thoughts were almost right lol

[@madLphnt]

Cheers i started skating at like 12 and stopped when i was 17 bever really tried to hard at flip tricks just kinda skated around doin shov its and 180s ...starting again now at 32 determined to land my first kickflip and beyond.

[@m.clayton79]

It was magic when I was a kid✨

[@hisworldismine]

Bro this video is soo siiiik 🙌 best step by step to a real set up. If only you had the press pressure and heat temp for the press and the kind of glue used. calculations for the mold and program used that would make it so much easier but you did great thanks. That guy who skated at the end can shred.

[@princessmeganelsa1901]

Very Niceee!! 💗💗💗🛹🛹🛹

[@lutuw2891]

Music is actually so fire

[@MayhemStudiosSkateboarding]

🔥🔥🔥

[@callsign_doc6429]

Dang that is pretty cool

[@ActiveAtom]

Great share on the how the skate boards are made, keep on making stuff, it is the best. Lance & Patrick.

[@mai_tainaida7189]

Art

[@elizabethdeguzman2201]

What a paradise

[@warlord7779]

That’s the lords work you doing right there! 😂 Appreciate the fine craftsmanship! 🫡

[@thebobbit5895]

🔥👍👍

[@jmarriolab2780]

want this automation machine for me :)) I will use 1 board per day 🤟🏿 skateOrdie fellas !

[@wnerko7484]

man.my printing press at work has all the components to make a deck.glue rollers for veneers.application units for high pressure pressing.u.v.varnish and u.v.lamp.our press is not intended for that but i could get it to work for me.lol

[@BisterOne]

i have a brand , and i want to make some skateboard deck , but i dont know where can i made the deck

[@sandul-di8se]

💖

[@Barron198]

some companies actually screenprint the design onto the deck itself

[@stacyparker6411]

Where do you order your shrink wrap bags?

[@lousassole3340]

how can the sealing make an impact on the deck?

[@edogawanannko]

この工場で働きたい！

[@JamalFuckinKilla]

Dang!!!! You do that to every board individually? I figured there would have been a more of a flow in the production/assembly line like some how it's made shit.

[@petergarcia8225]

I love watching fun being made..pure joi😜😜😜😎

[@steviebaby2857]

Where was the truck holes drilled.

[@juliocarpio9436]

So, i cant do this at home?

[@JBM9823]

A friend of mine bought a used press and made his own. You can buy the epoxy and the veneers. I think the press and roller was maybe a couple grand?

[@JBM9823]

Awesome! But I dont get how pressing all of those veneers all at one is making a consistent deck, wouldnt the top deck be less steep than the top deck?

[@RaschkaFilms]

There are woodshops pressing them one by one so everyone is exact the same. But yes when they are in molds like this everyone of them is slightly different ;)

[@renesanchez5333]

Can you do this on a fingerboard?

[@linusbao8650]

do they stain the wood before sealing it? What sealant do they use?

[@psyche234]

Always stain the maple before applying clear coat.

[@deanajerkovic9173]

Hi! How long does it take to dry a skateboard deck after applying a spray?

[@psyche234]

I use a clear coat on my guitar necks for DIY projects, usually the curing process takes about 24-48 hours. Considering that most guitar necks and skateboards are made from maple, I’d assume it would take around the same time to cure.

[@jilliebugg3375]

What about the griptape

[@PierreMcclardy1117]

Thought I was gonna see how they put the wheels on but I guess not

[@chancelucero6205]

Where is this manufacturing shop located?

[@RaschkaFilms]

In Canada ✌

[@dyllanhill109]

what about the holes

[@teknikkemal07]

😲😲😲😀😀😀👍

[@user-kd4ko6wm6u]

I want one 😭😭😭😭

[@timothycamille6003]

I wanna make skatevoards now and design my own brand lol

[@RyanPowerhouse]

Enjoy bankruptcy 👌

[@tacosrbetterthanpizza3116]

My friend has his own brand, and its all made in Illinois

[@NECROPHILIE]

Who skates the line at the end?

[@RaschkaFilms]

His name is Max Schnoor it's a german teamrider for our brand Vamos Skateboards :)

[@NECROPHILIE]

@@RaschkaFilms Danke 😉

[@Loganm.0]

What’s the company §.

[@kampoouch]

Посмотрев это видео я так и не понял, откуда берутся такие космические цены на доски

[@PadreVuador]

Make shape, but... Trucks, rollers and Wells?

[@andresk8boarding]

Tijuana?

[@justsomefakeguywithoutamou5538]

YOU FORGOT THE TREES

[@zachariasfransson552]

i dont get how all those veneers don't stick together in one giant board. I mean they glue together a whole bunch of them, not just the layers of one board at a time. Anyone?

[@anttikomulainen3185]

They layers between the boards are without glue. The ”face veneers” are not going trough that roller gluer but added dry when they do the stack that enters press. So ”recipe” is like this when inside the press; - Dry top veneer (no glue) - Middle veneers (glued both sides) - Dry bottom veneer (no glue) ...here the next board starts... - Dry top veneer (no glue) - Middle veneers (glued both sides) - Dry bottom veneer (no glue)

[@erikreber3695]

Wow. You guys are really pressing out numbers...

[@feriyuliarinto6517]

I want to work in a skateboard factory but I have no experience even the language is still halting

[@techwizards6988]

Awsome.Our factory also manufacture the skateboard.I will post our video soon.If you are distributor, contact us to get an attractive price of high-end skateboards.

[@veikkoahonenn8927]

3 comments?

[@julianprt4596]

At the end, destroy it

[@jesserodriguez5180]

What companies can I work with to create decks with my logo n design's?

[@psyche234]

Find a local board company and show them your designs, more than likely they’ll like it and maybe you can make a career out of it.

[@5elevenfirewood195]

So many missing details

[@markswinney6618]

Too bad I learned this from skate 3

[@ukrapstories6217]

Just play skate 3

[@brandyhawking7908]

Woodglut instructions is nice for that.

[@user-kt8km5cp9k]

Camera angle is suck

[@RNicolasRuvalcaba]

HOW TO MAKE SKATEBOARDS - BY PUSHING A BUNCH OF BUTTONS

[@theguywiththebighead5432]

Bad filming