how to make Smart Plant Pot (Self Watering Plant Pot)

[@PenguinDIY]

Thanks for watching 😉😉😉 Subscribe to my channel if you like❤

[@Ramdevi11456]

Plss make bluetooth speaker

[@Amovina]

سلام مهندس خسته نباشید . چرا دیگه ویدعو نمیذارید؟ ماهی یک ویدعو میذارید؟ .This channel is the best technical channel.

[@PenguinDIY]

@@Amovina سلام یکم کسالت دارم، حالم که بهتر شد حتما ویدیو میزارم

[@Amovina]

@@PenguinDIY آخ آخ گفتم لابد حالتون خوب نیست . خدا کنه زود خوب بشید .کانالتون حرف نداره کاراتون کاملا تمیز بی نقصه عالیه . کلی ایده گرفتم از کانالتون.من مهندس برقم ولی علاقم به مکاترونیک هست عاشق نوآوری .ارتقای گجت ها و اختراعم کانالتون راهنمای عالی هست برام که از کجا شروع کنم . خدا کنه زودتر خوب بشید 🤲🏻. that was perfect. a vase smart

[@PenguinDIY]

@@Amovina ممنون از لطفتون و انرژی مثبتی که میدین.

[@vmened]

Author did a huge mistake in that project: if your sensor working contitiosly it turns into accumulator contacts and will produce dangerous salts in the ground. Please insert 1 hour delay between reading sensor data in your firmware. Best regards

[@justincandas]

he also put in the wall mount upside down lol

[@DanielGilbert86]

@@justincandas They are oriented the right way. You don't want the openings for the screws at the top. //Edit: You are correct that they were oriented the wrong way in the beginning. They are correct in the final shot, just for everyone else wondering what Justin ist talking about.

[@technics6215]

Is this kind of sensor can be reliable after one year or more? I would use insulated version.

[@Mr_ToR]

You're right. This sensor is resistance based. It quickly corrodes and self distructs. You need capacitance based sensor. Capacitance based sensor looks similar but it is isolated and does not need direct contact with soil to work. Since capacitance is depentant to the dielectric constant and dielectric constant changes with water content (or whatever else too actually), you can measure change in water content. Since there is no contact it never corrodes. There are water level sensors that detects the presence of water from outside of your plastic or glass container which uses the same concept. They are also great for water tank, aquarium, hyroponics, aquaponics etc automation. I'm using them in my water plant tank automation in my balcony to automatically top off the water level.

[@Viena-qrirwn3jjvgggvjm]

What can I like to start a while lots of stuff behind the hospital? I love it though. I love it though. I love it though I love it though

[@xXBaZzAXxGaming]

Why is nobody talking about how you drilled perfectly straight through like 150-200mm of wood?! That's insane !

[@technics6215]

Actually this is not that hard if you have some experience with drilling. And this is not wood, it is kind of chipboard or fiberboard. Many boards like this are more dense on the surfaces and less dense in the middle core so the drill wants to go in the middle.

[@xXBaZzAXxGaming]

Still impressive to make the two holes meet perfectly in the middle no matter the material.

[@imnutrak130]

Lots of videos of watering, but this ias beauty on a whole new level, even with a DIY water pump with a simple syringe! Love it!!

[@naimuddinsourav]

5:29 this guy is like, Not available a water pump at your requirement, make it yourselfer. This is literally authentic DIY channel to exist on KZbin

[@SiavashSafaei-hb4os]

تصویر برداری و تدوین بسیار ماهرانه وفکرشده ست.

[@PenguinDIY]

ممنون از لطفت

[@sergiovega8664]

Wow! This is so simple. I'll just head out to my dedicated sandblasting room.

[@adamtajhassam9188]

Where do u get the sensor or how do u make 1? Wish he showed that..

[@l3attlefield2]

خسته نباشید. بسیار قشنگ‌ و یونیک ساختید. واقاً هنر نزد ایرانیان است و بس

[@PenguinDIY]

ممنون

[@E85_STI]

Next video you should make an automatic silicone dispenser for the silicone gun you used In the video. I’m good with these types of projects and I ended up making so 12 volt fans that power on with a temp sensor, 12 volt dc low voltage cut off and a solar panel with batteries to cool off my shed in the Summer.

[@SirZeroDay]

Mashallah dash harf nadare karat😍

[@daniel7980]

خیلی کارت تمیزه عالی بود.

[@mehrshadsaedi1167]

عاااالی لذت بخش جذاب ❤️

[@PenguinDIY]

ممنون

[@amirangh8438]

chi mishe goft . foghe khafan . heyf ke nemitonam besazam good jub❤

[@mimo1371]

یاشاسین ، چوخ دا گوزل 👍👍

[@PenguinDIY]

چوخ مرسیلر

[@russgladstone432]

One of the best subscriptions i have made so far, always a joy to watch your fabulous ideas, congratulations on over 100 subscribers,,,, and counting

[@PenguinDIY]

thanks

[@NoName-ed7qn]

This is really amazing ❤❤❤ brother ❤️ Love from Bangladesh❤️❤️

[@hayola2937]

سلام کارتون بی نظیر بود 👍👍 ببخشید میشه طرز ساخت فرز انگشتی رو هم بزارید خیلی ممنون میشم

[@chrismorton8412]

love your work it is always so neat and well presented! keep it up!

[@parsa3593]

ایول خیلی خوب بود 😃

[@PenguinDIY]

خوشحالم که از ویدیو خوشت اومده پارسا جان

[@ozcanonal]

Awesome labor. Its a pleasure to watch your videos.

[@elyass.k.n5994]

خیلی عالی،مثل همیشه 👍👍، ۱۰۰ هزار تایی شدن هم مبارک🎉🎊 اما من ویدئو هات رو بخاطر کار فوقالعاده تمیز، دقیق و رعایت ریزه کاری ها تماشا میکنم و خیلی برام مهم نیست چی میسازی، از کار کردنت با چوب لذت بردم. عالی بود🌹🌹🌹

[@PenguinDIY]

ممنون از لطفتون

[@Dom646464]

Okay, this was my first video I saw from you and then I was curious. What else do you have on your channel and I’m speechless of the quality from your builds it is astonishing. I learn so many things from your creativity. If I would see you on the streets, I would love to shake hands with you and probably would say I’m a big fan of your work hopefully your channel riesig to the moon because it deserves more subs :-)

[@PenguinDIY]

Thank you for your compliment.

[@iknowdawae893]

Underrated channel. Keep it up!

[@lisboris4479]

Will there be QnA? I really want to know how you come up with stuff like this

[@azizbinattia85]

You're more excellent man and genius work 🏆🏆🏆🏆🏆🏅🏅🏅🏅🏅🥇🥇🥇🥇🥇

[@ammi74656]

Wow..... very ,very nice....👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🤗

[@anshu6816]

congratulation for 100k subscribers :)🎉🎉🎉🎊

[@PenguinDIY]

thanks

[@hamidrezakarimian4704]

کارت درسته عالی بود

[@Jayesh-ilpa]

It's awesome sir Wonderful work

[@TheClutchCraft]

Genius, I love your videos keep it going 👍👍👍

[@abolfazlkofa]

خدا قوت پسر🖐

[@mrrock131019]

Фантастика!

[@davk]

Completely useless for me but I love your execution and estetic. I am really impressed. Good job.

[@3DIYOriginal]

Awesome Project !! 😎👍🏻👍🏻👍🏻

[@DreamsVille77]

Awesome video

[@SuperBoomberman]

Cool build. But this probe will rust, damaging the soil, so better use some protected moisture sensors.

[@rudimentaryganglia]

Actually you can buy thensame probe on Amazon and they last very well indeed

[@mohammadrezamim272]

You can use capacitve sensor instead, that would last for years.

[@PenguinDIY]

no problem. You can use graphite inside the pen battery, which is resistant to corrosion inside the soil.

[@shaynegadsden]

How would it rust the probes aren't iron they are tinned copper

[@electronron1]

@@mohammadrezamim272 I agree, but the inexpensive ones need to be conformal coated or the circuit board will become saturated and quit working. I've heard that finger nail polish works as a conformal coating but the sensor should be cleaned and re-coated every few years. I think the sensors will work if inserted in a plastic bag which may be even better than a conformal coating.

[@NelsonAI-gy7nx]

I just wish you would have shown it mounted to the wall, as you obviously intended to since you made those wall mounting brackets. I would like to have seen how you ran the power cables and your water source?

[@hussein2623]

Congrats on 100k subscribers

[@PenguinDIY]

thanks

[@mohamadreza3390]

عاااالی بریم برای پروژه بعدی😍😂❤️

[@RAVEN_OFFICIALL]

فوق العاده بود ❤amazing

[@indianplayer5025]

I really like it... You're awesome... 😊😊👍

[@LifeHackerMax]

This is done brilliantly 🥰. Love the way you shared every part of your project. You even showed the sandblasting of the glass below. I would add a single observation: if the sensor fails the water will keep running until the motor fails or you are left without water in the container. Is there a fail safe for this?

[@PenguinDIY]

You can set a timer for the motor so that when it is connected, for example, it will be on for 20 seconds. But in order to make the video not too complicated, I omitted it.

[@technics6215]

I would try limited water source to be sure :)

[@fthmzn5315]

Verry nice work Thanks

[@Geeksmithing]

Ah yes. MDF, the most water friendly wood type product on the market!

[@herantd]

You don’t have a glue gun but own a sandblasting station 😆

[@scwobu]

Все класно, тільки корням рослин потрібен доступ до повітря інакше вони почнуть гнити (дренаж). В наступному варіанті краще зробити трубочку з отворами на всю довжину для рівномірного поливу.

[@alialima9836]

عالی عجب چیز خفنی شد

[@PenguinDIY]

ممنون علی جان

[@elvinmahmoudi3225]

عالی بودش 👏👏

[@docarvalho]

Amazing talent!

[@pouria9315]

مثل همیشه عالی

[@mehrdadgh9472]

Perfect 👍💯

[@the_otter5936]

This is a great video! Do you have any circuit diagrams or parts lists that you could upload?

[@RainRoseville]

Nice! I have always wanted tomake one of these so I'm confident that my plants will be ok when I leave on vacations for long times. I guess what's next fromthis is to connect a UV lamp to a timer so that takes care of the lighting as well.

[@Silence-Ali]

very good very good fantastic grate

[@user-rk9kb2sd9b]

Cool, I'm going to make 47 of them for my 47 houseplants, and count how many plants I'm going to lose! 👍👍👍

[@RAVEN_OFFICIALL]

congratulations 100K SUB 👏🏼👏🏼👏🏼

[@PenguinDIY]

thanks

[@jwn741]

nice build!

[@arianrahimi2181]

دمت گرم عالی بودی

[@PenguinDIY]

ممنون

[@mohammadrezamim272]

عالی و ظریف و درجه یک فقط جواب کامنتای بیننده ها رو بدید لطفاً به محبوبیت کانال خیلی کمک میکنه یا حداقل اینکه بعضیاشونو لایک کنید. و اسم اجزایی که استفاده میکنید هم اول از سایتای علی‌بابا یا علی‌اکسپرس پیدا کنید و بذارید و اگه لینکش رو هم بذارید میتونید از طریق حساب علی اکسپرس یه درصدی بگیرید که خب قطعا به نفع کاناله مثلا اون بنده خدا dc dc buck voltage converter هست. یا جک آداپتوری روپنلی فارسیشه چون "روی" پنل نصب میشه، انگلیسیش panel mount adapter jack هست. با اینهمه کاراتون عالیه و مردم دوست دارن، ۱۰۰,۰۰۰ تایی شدنتون مبارک.

[@PenguinDIY]

ممنون از توجه شما

[@anshu6816]

nice idea 👍

[@Dark_Rober]

I recommend usb type-c power port with upconverter

[@EmperorofWeb]

Amazing 👌

[@226cenk9]

Can you do a Kia Optima 2012 key fob, a button delete and slim down to the size of a regular key? I mainly want the fob to be able to be detected by the car to start.

[@nj_uno]

Incredible Dude 👌 👌 Brilliant Idea

[@GoSharpTutorials]

Awesome video. You do everything so precise. Respect & keep going ✌😉

[@hqgprojectofficial]

Wow Great Keep it up

[@x-weshtv9140]

Bravo .fantastic !

[@diy_wizard]

As Always, very elegant Design! Respect for sandblasting that glass yourself! I like the glass & LED strip combination! Great work!

[@Salviali]

احسنت. لذت بردم.

[@oscarpadron5107]

Good job!

[@hr.differentmind2048]

Good job,

[@des1dave618]

Where can I find all of these electrical components used in the video

[@caiozowyecamachocabral5413]

Amazing!!!!!

[@RonPiggott]

Smart idea.

[@techpost8230]

For video recording what you are using phone or dslr?

[@PenguinDIY]

I use the phone.

[@Penguinishy]

youd think you would have a pipe going full length of the planter with multiple holes so the full planter got a even coverage of water instead of one side mostly being saturated.

[@shahinamini4934]

Mayeye eftekhar🌹 با سلام و درود و تبریک دوست عزیز شما تو اکثر کارهاتون یه حرکتی میزنید که ماژول شارژ هارو کوچیک میکنید،امکانش هست یه برنامه جدا براش در نظر بگیرید من یکی که به شدت به این شگرد نیاز دارم،اگر ممکن باشه یجوری به ما یه مقدار اصولی یاد بدید که مختصر ترین راه جمع و جور کردن ماژول شارژ فکر کنم بصورت smd باشه چیه،یعنی کوچیکترین حالت که جا کم بگیره. خیلی ممنونم و بازم تبریک میگم بابت ابتکار عمل در همه کارهاتون.🌹

[@PenguinDIY]

سلام امکان اینکه براش یه ویدیو جدا ضبط کنم وجود نداره. ولی داخل این ۳ ویدیو کامل و دقیق نشون دادم مراحلش رو. هم ماژول شارژ و هم ماژول پاوربانک studio.kzbin.infogDXjetxy604/edit studio.kzbin.infoFqvA9moB9R0/edit studio.kzbin.infoZXD2Jqg4518/edit

[@mobina734]

It was cool✨

[@technics6215]

These soil moisture sensors are not very good. Capacitive version is better. But this is still awesoeme. I have to build something like this with my son :)

[@aherontas1943]

Really nice project, but from many plants that i have tried doing it most of the times in long term usage the sensor contacts are been destroyed or in bad condition and the plant doesn't get enough water.

[@JohnWayne99999a]

Impressive!

[@helioramos1974]

That's we know you don't water..... You are working on this amazing stuffs!! Hahhahahahaha Good work Man! Congrats

[@eddyyu7091]

This is very useful !

[@Naveenmahourkoli]

👍👏💯

[@utuberlars]

Mega geiles Video.

[@SimonMcNair]

Worth noting the main component is a HCW-M214 Moisture Controller Module Set DC 12V Output Switch

[@one_as]

Lindo proyecto 👍

[@MarshaNPILoveCanada]

Wow, a manual and large sandblaster. The one that I've seen is the smaller, portable version (red color). And it includes the specialized gloves and protective glass :/

[@arianrahimi2181]

😍😍😍😍😍

[@desanmartin655]

wow 😲

[@FBI-Tino]

So cool

[@Meysam1997]

Amazing!

[@lennonhorrocks3754]

A lovely design. And the technical side to this is so simple but effective. I can think of some uses for it already. But I beg you please, never drill towards your hand. Even if you only plan to scrape the surface. And also try to do the drilling before putting the wires and circuits in. It was hard watching that drill bit cutting so close to them.

[@shashankks1962]

So, this is a good project. But if your looking for accuracy and efficiency, it isn't a good one at all. Why? Coz one sensor on the top isn't an accurate measure of the moisture content in the soil. And someone here was pointing out about salts? I'm not sure what you mean by that.

[@TAGSlays]

5:05 You are aware that super glue does not adhere to nylon right?

[@amandioreal2293]

Nice project, but I shouldn't put electrical bellow water line.

[@elijahtheurer344]

Can I use this plant pot as a place to keep my pot plant?

[@PenguinDIY]

yes

[@justins21482]

Do we not own a countersink?

[@GritZ56]

1:53what is the name of the machine??

[@Revan5410]

1:28

[@yoshmarklund]

You might have some drainage issues, and the sensor contacts will probably go bad. Looks good tho