how to make smartphone cooler at home | using peltier module ||

[@AmigoPobree]

Finally someone who understands me bro my cell phone is also a Nokia and it gets very hot it's like a lot you know and you gave me this brilliant idea to do this

[@AhmadMohammad-n8q]

I think u do something wrong.. type c port will not help u provide enough energy to peltier so it will not work good probably because it needs 12v and the mobile charger is only 5v

[@mahmudhasan1451]

It also works on 3.7v but need up-to-date 2amp I also tried

[@bangleoelektro]

Not really. The peltier voltage in full operation is 12V but you actually can go lower than that, because you don't even need it to becomes too cold for your phone, until the ice came out. Enough to bring down the temperature, so 5V would work. If you go too cold, maybe it cause water vapour and wet inside ur phone.

[@rookieecho6213]

Hmm so 8v is enough

[@edge_boy_adi]

There are also some different peltier module available in the market which works on 3v and 5v.

[@NAIRITYA2011Verma]

Try 3 to 4 lithium ion battery connect it to parallel 😅 and add a charging module you inbuild rechargeable cooling fan is ready

[@ChorniMechik]

Твои видео напоминают мне 2016-2018 насталгия самоделки и тд

[@UltimaTiV-one]

Now, you don't manke any prisoners, you kill the heat instantly. 😳👍👏Funtastic !dea.🎉🎊❄❄❄

[@Jzen04]

No thermal paste???? Plus you have a 12V fan and the charger's output is only 5V and most likely the Peltier is also 12V 2~3.50A which will underperform with your 5V ~ 6A Max output charger. Most phone coolers has a converter so it is compatible for your Type-A 10-30W phone charger. But this isn't it, and lastly. Why did you super glued it??? How will you do maintenance to it after 2-5months from now?? The peltier will underperform since the there's no thermal paste and dust will go inside the fan. I just recently cleaned my Black Shark BR30-RM with thermal paste and clean off the dust and it's performing as cold as how I bought it 2 years ago. This video has alot of flaws but gets the job done. BUT, your phone cooler won't get cold enough since the 12V fan and Peltier will get burn out since you're also using a 5V ~ 6A charger.

[@itxmyth]

you are grt brother 😇😇😇😇😇

[@Kaiten-uk8gd]

Where do you put the thermal paste???

[@Jzen04]

@@Kaiten-uk8gd both sides, pls do your own research for this type of DIY, and not follow one video because everyone is different and just follow what's correct and tested by many

[@Kaiten-uk8gd]

@@Jzen04 I'm building my own in the future.... instead of using any USB, I'm using a power supply of a prepaid mobile wifi... Which produces 12V..... I'm sure you can get the most of it right?

[@Jzen04]

@@Kaiten-uk8gd You know it is more expensive to create your own right? I would just recommend you to just buy a Black Shark phone cooler for now, and study the electrical components of what you're doing. But your 12V jack plug for a phone cooler idea is interesting. But do keep in mind that Peltier has a higher Amp rating(about 3~4A) and using a standard 12V 2A jack plug charger won't work if you don't know the tru ratings, remember. Numbers matter, and you're dealing with electricity, so be careful. Buy a proper jack charger for your project. Like I said, you're 12V jack idea is good, but be careful, and buy a heat sink, 12V 0.5A 40mm fan(this is just reference) Note: Some Peltier is 5V btw(but it's harder to find them online), and if you said you'll use a wifi jack plug (which is likely 12V), 5V ≠ 12V it will not work.

[@joseluisesparzarebollar9858]

Excelente proyecto, pienso que si la célula Peltier no está recibiendo el voltaje de trabajo, tal vez no llegará al congelamiento, y tampoco calentará demasiado. El ventilador podria ser de 5 volts para optimo funcionamiento.

[@huseyinbogazkaya9926]

Thats funny, coz adding a 0.2mm thick copper does a better job and not wast all that power! I mean android phones already such at heat as that are all somewhat plastic. I even get better reception with the copper on the back of my promax. Copper not only helps heat to be equal all over the ohone but helps with battery as well.

[@OddlyFamiliarStranger]

Could you elaborate more on this? I’m actually interested

[@kriShna-nz7gz]

I have glass back?? What should I use

[@huseyinbogazkaya9926]

@@kriShna-nz7gz use a thin copper sheet which will distrust all the heat from the hot area (cpu) on your phone to a larger are easier to cool. You can use any case to hold it in place, i recommend the new cases with holes to ventilate the copper sheet. Thinner the better. I found out the thickness of the copper doesnt make a difference but also adds weight if you get thicker copper. Thinner copper sheet is easy to cut with siccors too.

[@fearfultariff]

Platter module in thumbnail got me laughing😂😂

[@davylive8472]

Platter h bhai snacks h 😂😂😂

[@RAHULLMIISHRA]

Bro typ c port and fan link please and. Heat sink

[@mahmudhasan1451]

Ubgrade it with water cooling and water cools the peltier module

[@trueAKspeaks]

Brother I just wonder if a USB port would be enough to power a peltier

[@Barath_69]

it has no thermal throttling , is it safe , will it not destroy our phone by causing internal condensation ??

[@thundergaming6756]

Bhai kaha se lena hai ye to bata do

[@navyaturubilli5663]

Where can I get all these parts ..?

[@gatausiapanamanyaudhdipake5268]

can u make it with water cooler please ???

[@techodisha4836]

can the temperature be dropped to 18 degree c

[@naitikdubey9454]

Easily

[@deepjyoti6456]

Not with a 5v power supply with just 2amps. This module needs 12-14volts to function properly along with 4-6amps. In addition to that, a proper heat sink and a bigget fan is required for cooling the hot side. After this, you will get temperatures like 5-10°c on the cold side provided that you use a proper but smaller heat sink to make it more handy.

[@naitikdubey9454]

@@deepjyoti6456 exactly

[@idontknow-vq9zp]

​@@deepjyoti6456bhai kam nahi kare ga proper hit trans per nei hota hit trns par kya koi system hi nai hai thoda jaga cooling dane se pura phone cooling nai hoga.... Mei 1215 peltir 12v 10 am use kar chukya hu or game bhi khel chuka hu is se badiya tabil fan use karlo acha result dega

[@ShaminSYC]

Can you provide the list of components you have used in this?

[@ibrahimwarsi92]

Bro can I use 5v for this thermoelectric petlier

[@SakibAhmmad-dt7gk]

It recommended 12 Volt 6 Ampair

[@RohitNubs]

You need 12v minimum 5amps Otherwise Your 5v supply will Blast 😂

[@avhragamerzofficial]

Bro how to get that peltier module??

[@realatable.memes.g]

From where i can get these

[@foxyridergaming9198]

great mods but..i think maybe should make with magnet and make smallest to fit more space with your hand is you want to use play game

[@techextreme4401]

Thermal paste use karna chahie tha

[@joseluisesparzarebollar9858]

Se me ocurre que se pueden utilizar un disipador y un ventilador reciclados de un procesador de un cpu.

[@RayRittik-gg7lz]

❤❤❤❤

[@rockxpubg5783]

Es main kitne volt ka charger chal jayga minimum please reply

[@8BitCreative]

12 volt is best , but you can use some good quality mobile charger also.

[@shivamyaduvanshi1819]

Its not working

[@LEGEND-RAJ]

Give product link in description

[@ShishirSarangi]

Bri all components ka link mujhe do please bro

[@adityakumawat1966]

at least provide links for raw items cause finding that small fan and heatsink is very hard in market

[@piotrlipinski1096]

What peltier module did you use? 5v and how many watts? A 12v module will also work if I lower the voltage to 5v converter?

[@CODMlixএ]

Nhi bhai nhi chalega

[@Avengers.1313]

Buy link bhi daal bhai

[@idontknow-vq9zp]

Pelter kya 12706 hai ya 12715 hai? Pls reply kar na yar

[@DJSKgamingYT1]

Mobile air pack hota he uske andar kaise coooll honga sirf bahar se thanda honga

[@deepbloo8351]

heat transfer ;)

[@NewstatePlayer100]

Exhaust

[@Diy.stopart]

Phone can cool down only with help of fan only. Try it.

[@asiananime12576]

What's a materiel cost

[@killerboyofficial9431]

Is se Acha wala hum Baanya😁

[@Nikyaa_Official_22]

Bhai aluminium heat sink kaha milega link hogi toh dedo please😊

[@Go神Hell]

Glue name 😊

[@Sujaygamerff2]

New cooler lunch Google 😂😂😂😂

[@LakshayGamingofficial]

Launch❌ Lunch✅

[@Sujaygamerff2]

@@LakshayGamingofficial 😂😂

[@المتصدي13-ف9ج]

❤️ ❤️ ❤️ ❤️ ❤️ ❤️ ❤️

[@kshyanapravasarangi8480]

Bro colling fan ki link do please bro 😢

[@kiborg_99]

Задумка интересная, но у пластиковой крышки смартфона плохая теплопроводность😮

[@ChorniMechik]

Можно в телефон запихнуть пластину с термопастой хоть немного градусов уберёт

[@brand99967]

Buy link bhej do bhaiya

[@techodisha4836]

What was the total cost of all the materials.

[@ash_sh_0008]

1k

[@pankajkewat5589]

Go buy archer typhoon phone cooler cost you around 12-1500 or if you want more cooling Buy 12703 peltier 150-200₹ Dc step down module 50-150₹ Cpu cooling fan 40*40*10 12v 150₹ and 40*40 heat sink 40₹ Aluminium plate 20₹ Type c female socket 20₹ PVC sheet 30₹ Total cost 700-900₹ you will going to get -0°C

[@abhiram.ssundary6989]

Bro changed the phone itselfe caught you in 4K😂😂

[@dimak6549]

Привет, сделай пожалуйста тесты с температурой в играх, или просто замеряй температуру в рабочем состоянии этого охлаждения. Буду благодарен.

[@fatbikermustak8910]

Bro can you send the all products link please and can i use is realme gt phone

[@PgkAleLive]

Yes

[@fatbikermustak8910]

Then send me bro​@@PgkAleLive

[@Arbz_World_Playz]

Bro total cost kitna

[@ВикторМарков-щ2н]

не приветствуется металлическую деталь на смартфон - на стекле будут царапины. можно через термопрокладку и стекло будет цело и термопередача лучше чем через голый металл

[@nub.snorlax]

Give me product link

[@AminulIslam-qm2nr]

Nokia is emotional 😢😮 1 pis

[@ftshagaming]

Before:high graphics settings After: low graphics settings

[@indrajitbarui4835]

Very good 👍

[@abukalam6217]

বাই এই সব জিনিশ কোথায় পাবো

[@matheusaugusto951]

thxxxxxxxxxx

[@3rakshitiyengar154]

Where can I get that aluminium square

[@Tutibreaker]

poor performance with this stuff, the Platter module use 12v and the cooler too, so you are using 5v power? why dont use a step up to gain the voltaje required by the Platter module and the fan cooler? , even you can attach a battery pack to make it more portable

[@ishonpanda12161]

it's a thermocouple..and the phenomenon is peltier effect 🤣🤣..wtf is platter..

[@ultra_awm]

Buy link bro

[@thegamergg200O]

there are so many things wrong with this project, i don't even know where to start... This guy never heard of thermal resistance, and probably never had physics classes to understand even the simplest principes

[@potcleanx7693]

this will cool the battery not the CPU

[@edge_boy_adi]

This will cool the whole aluminium chassis.

[@edge_boy_adi]

And also if the battery is running hot then it's health will drop fast and can't provide anough Amp to the phone.

[@mizanahmed4719]

Where is the Paltier modul power supply

[@AMBULANCEGAMING]

It's cooling device

[@novus649]

It doesn't need any suply it creates supply

[@johanmahajan2256]

Thermal paste left the chat

[@anisabaru3929]

This not good. Just click bait project

[@8BitCreative]

Brother It’s 100% working

[@techodisha4836]

Yeah it will work. Cause of the peltier module.

[@tunesnocopyright8879]

It works. I did the same for my phone

[@vishalrawani6410]

Scam hogya Bhai log

[@shiroyuki596]

p

[@ovishrocks1942]

Itne kharche me to new mil jayega aur compny ka😂😂😂

[@64-Bit_Creativity.]

Bhai or ek banake dhikao or easy bhi ho plz

[@abukalam6217]

বাই এই সব জিনিশ কোথায় পাবো

[@shiroyuki596]

p