How To Make Soldering Iron Using Pencil

[@MiniTechnicus]

🔻 Please, Subscribe 4 More. Thank you!🔻

[@HarGovindSingh-e8x]

Hkj

[@MiniTechnicus]

@@HarGovindSingh-e8x thank you!

[@SamHome-e7j]

Great work! The step-by-step guide was so easy to follow. Definitely going to try this next time I need a soldering iron.

[@SamHome-e7j]

I’m always amazed by your innovative ideas! This soldering iron is a game-changer

[@MohammedHassan-lo3rl]

It's wonderful good boy nitakutomba Kwa kazi yako nzuri

[@MiniTechnicus]

Thank you for your comment! Have a great day!

[@ЕрасылАзаматулы-ч9н]

Шлю!. Ш

[@JesJane123]

Congratulations this is wonderful

[@MiniTechnicus]

Thank you for yor feedback! Have a wonderful day!

[@shubradajim]

Waoo, tnx for the lesson.

[@MiniTechnicus]

Thank you for your comment! Have a good day!

[@saritasarita7314]

Very nice ❤❤

[@MiniTechnicus]

Thank you for your comment! Have a wonderful day!

[@HelpfulTrick-e3h]

The video is really creative

[@MiniTechnicus]

Thank you for your comment! Have a great day!

[@MaryWambua-fr1jj]

I will try it ❤

[@MiniTechnicus]

Good luck with your project! Let me know if I can help you with anything else. Thank you for your comment! Have a great day!

[@RudiBeragam]

Nice idea

[@MiniTechnicus]

Thanks a lot! Have a great day! Thank you!

[@CreationContinuous]

Your video is very good and useful

[@MiniTechnicus]

Thank you! Good luck with your project!

[@OjesiTrust]

It works 😊

[@MiniTechnicus]

Thank you for your comment! Have a great day!

[@MiniTechnicus]

Thank you for your comment! Have a good day!

[@mouhamedgg1900]

5v.1A charger is it working?

[@MiniTechnicus]

Probably not. You need a bigger charger.

[@InspirationalRacingCar-kj6xn]

Good

[@MiniTechnicus]

Thank you for your comment! Have a great day!

[@nobetternornoless40]

What is that you stuck the pencil through?

[@MiniTechnicus]

It is a piece of copper, obtained from a 1.5mm thick wire. Thanks for the comment! Have a nice day!

[@رواسعصام]

واو كم انت مبديع😮

[@MiniTechnicus]

شكرًا لك! يوم جيد!

[@YamiDrawz]

Does it work with 12v battery

[@MiniTechnicus]

Yes, but you need to make sure you have enough amperage. At about 12V / 1.5A it should work. Thank you for your comment! Have a good day!

[@MylannaBinguis]

I love it,...but that alot of stuff that must people don t have att home.. 7

[@MiniTechnicus]

Thank you for your message! You can use it without the metallic cap (the most difficult part), but the soldering iron's life will be very short, because the graphite is not a very resistant material.

[@PalestineAB]

❤❤❤

[@MiniTechnicus]

Thank you for your comment! Have a good day!

[@NadirAmmari-tf2sr]

فكرة رائعة❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@NadirAmmari-tf2sr]

شكرا

[@sudeshneelaka7599]

බොක්ක😊😅😮🎉😂❤

[@MiniTechnicus]

ඔබගේ අදහස් දැක්වීමට ස්තූතියි! සුභ දිනයක් වේවා!

[@ThanhNguyen-fq6vm]

Khi mỏ hàn nóng ta xếp giấy vệ sinh quấn miễn sao đừng bị nóng tay ( dùng ngón cái & ngón tay trỏ )..& vuốt sạch là xong ngay ! Tôi vẫn làm vậy vừa nhanh vừa tiện .Quý bạn thử xem nha ! tm,

[@MiniTechnicus]

Cảm ơn nhận xét và đề xuất, tôi cũng sẽ thử phương pháp này. Một ngày tốt lành!

[@jakarzzzt.v8617]

Thank you

[@MiniTechnicus]

You're welcome. Thank you for your comment! Have a great day!

[@jorjemoralez]

Ну, если есть лишний дом, то играйтесь!😮

[@d3mns0n]

good idea, keep it up

[@MiniTechnicus]

Thank you for your comment! Have a great day!

[@Newman04vrp]

Wow ❤😊 good

[@ReeseAddo-lg4wk]

😍😍😍

[@MiniTechnicus]

Thank you for your comment! Have a great day!

[@carolinechisala1051]

This is great wanderful

[@MiniTechnicus]

Thank you! 🤩

[@ChimdiIkpeazu-ii3xq]

My pencil broke several times when I tried this

[@MiniTechnicus]

You should be very careful when you cut the wood from the pencil. Also, don't put very much pressure on the graphite, because it's fragile. Good luck with your project! Thank you for your comment! Have a great day!

[@emiliocoletta1071]

1. April

[@MiniTechnicus]

Not at all. You can replicate this experiment with ease. Thank you for your comment! Have a great day!

[@GodcanJoeEhigiator]

I HAVE TRIED THIS BUT DID NOT WORK

[@MiniTechnicus]

Check the cable or the charger. You need to have at least a 2A one.

[@ketilforselv913]

❤❤😂🎉😢😊

[@tahamht-p3l]

what is the yellow Paper

[@MiniTechnicus]

It's not paper, it is a heat shrink tube, made from plastic.

[@priyabratroy6573]

Theoretically ok but practically no, because the lead has become weak & breakable after the two cuts.🤔

[@MiniTechnicus]

Indeed. It's just an experiment, but you can use this method if you're in a hurry, and you have no soldering iron. Thank you for your comment! Have a great day!

[@StoneStories991]

Informative video! Thanks!

[@MiniTechnicus]

Thank you!

[@MihaiStanciu2701]

@@MiniTechnicus you're welcome, looking forward for more videos!

[@muaih]

Mula² kabel usb warna hitam ...lepastu tukar jadi merah pulak..macam mana ni bro ..sedihhh bro

[@MiniTechnicus]

Saya menukar kabel kepada yang lebih panjang, USB 2.0. Kabel pertama tidak membenarkan amperage yang mencukupi, dan besi pematerian tidak cukup panas. Terima kasih di atas komen anda. Hari yang baik!

[@rajeevsiriwardena3936]

Great buddy , good luck !

[@MiniTechnicus]

Thank you, Rajeev!

[@KarchanBujar]

I Think It Can't Make It With 5V 2Amp Charger. Only Can Do It 12V.

[@MiniTechnicus]

It works as you can see in the video. You need a good cable, if is thin is unable to transport the electricity at a good rate (2A). Thank you for the comment! Have a good day!

[@EmanuelFlores-xz2rr]

🎉🎉🎉🎉

[@JB-zo6uy]

The hardest part is shaving the pencil without braking the lead.

[@MiniTechnicus]

You're right! :) Thank you, J B! Have a great day!

[@Коля-д1н]

Зарядник просто сгорит от такой конструкции и всё.

[@MiniTechnicus]

The charger does not burn unless it is short-circuited. The graphite bar has a certain resistance that consumes the energy provided by the charger without burning it.

[@TarhEnuk-vo4ne]

USB Ka coller kesa change ho gya 😅

[@MiniTechnicus]

mainne ise ek lambee kebal se badal diya. :)

[@믿음소망사랑-d6i]

손재주가 대단하십니다

[@MiniTechnicus]

감사합니다! :)

[@nobetternornoless40]

Never mind I can't do it I don't have a drill and all that stuff😢

[@wahabjemilat2870]

Is it working cord

[@MiniTechnicus]

It's a fast charging USB cable.

[@davidstephens189]

First of all, this looks way too dangerous. Second, if I tried doing this same project.... I'd cut my fingers off. Last.... I bought a complete USB soldering pen kit from TEMU for 5$.

[@MiniTechnicus]

As I said in the description, this "how to" video is meant for educational and entertainment purpose only. :) If you're in a hurry, and you need a soldering iron, you can use this trick to solve your problem. Thank you for comment and opinion!

[@davidstephens189]

@@MiniTechnicus No thanks... Haste make waste. Or fire. 😁

[@Mehmet303j]

​@@MiniTechnicusit is safe? it burned

[@MiniTechnicus]

​@@Mehmet303j it can be used for a few minutes of work. If you make pauses, it can be used for a longer period of time. Thank you for your comment! Have a great day!

[@brianthrush1945]

First of all, I'm struggling to even come up with the words to describe how absolutely useless unnecessary ignorant boring and pointless your post is. What would possess you to even think let alone actually follow through with it to come on this man's video go to the comment section and spew off some nonsense about a 5 volt novelty pencil soldering tool looks dangerous to you and you chop your fingers off as if it has any sort of usefulness or relevance is beyond me seriously dude and then to go on and tell people to just buy one and to make that even worse you follow up with a comment about some stupid old saying that doesn't even apply talking about a fire hazard. How do you not realize that that contributes absolutely nothing it makes you look like a complete dick. Of all the f****** videos or whatever else you could troll on the internet this is what you decide to do you suck man. That's really about all it boils down to shame on you for making me have to f****** read that unswivel my head say a prayer for mankind I hope you don't have kids or coach kids or teach anybody anything or talk a lot to anybody about anything cuz it probably is just terrible all right I'm done here you suck man seriously thanks for the video bro

[@sachinpoojari2614]

I also tried this but didn't work

[@sachinpoojari2614]

Yes

[@MiniTechnicus]

It should work. Do you have a 2A charger? Did you use a fast charger cable?

[@LydiaKarumbidza]

Wow

[@MiniTechnicus]

Thank you, Lydia!

[@roscagiorgiana3033]

Interesting! Thank you!

[@MiniTechnicus]

Thank you, Giorgiana! Have a great day!

[@MrLeoradon]

handled gently or it will break the pencil

[@MiniTechnicus]

Indeed, the pressure can easily break the graphite core of the pencil. Thank you for your comment! Have a great day!

[@MahendrGurjar-d6j]

जी

[@NobirUddin-ig7ip]

চার্জারটি ব্লাস্ট হবেনা

[@MiniTechnicus]

You can test by yourself.

[@NobirUddin-ig7ip]

ব্লাস্ট হয়নাই

[@MiniTechnicus]

@@NobirUddin-ig7ip আপনি কি পরীক্ষার পুনরাবৃত্তি পরিচালনা করেছেন?

[@NobirUddin-ig7ip]

হে করেছি

[@MiniTechnicus]

আপনি পরিচালিত? এটা কি একইভাবে কাজ করে?

[@ruslankroitor1908]

Напишите на русском штобы понять и пусть обезняит

[@MiniTechnicus]

Трудно писать на каждом языке. У меня есть гости со всего мира. Я постараюсь добавить несколько субтитров, но это очень трудоемкий процесс. Спасибо за ваш комментарий! Я очень ценю это! Хорошего дня!

[@FernandaFrancelinodaSilva-j1v]

Deixa de mentira eu fiz isso e não fosionol 😤😡

[@MiniTechnicus]

Obrigado pelo seu comentário! Você deve ter feito algo errado. Observe atentamente todos os passos, o ferro de solda deve funcionar exatamente como no vídeo. Qual amperagem você está usando? Qual a espessura dos cabos?

[@cinnamocinnamon]

they burnt my cable

[@MiniTechnicus]

You need cable able to pass 2A, because the current intensity could destroy the cable. Thank you for your comment! Have a great day!

[@cinnamocinnamon]

Oh ok

[@dineshpatel7851]

Hi

[@sandsand-ht3ev]

😱😱😱😱😱😯😯😲😲

[@ernstlessau8208]

Sorry - but it 's complete shit. Copper - wire is black oxidizing at the neccessary 230 °C for solderings and wood is becomming black charcoal after a short time.

[@ernstlessau8208]

Second sorry, but your technical imaginations or electric intelligence ͡ ๏ ̯͡๏ - are very poor.

[@MiniTechnicus]

Thank you for your comment! As I explained, this soldering iron can be used only for a limited time. If you look closely at the video, you'll see that the wood starts to burn, because of the high temperature. This is an educational project and the soldering iron can be used when you're in a hurry, and you need to solder some electronics. Have a great day!

[@norbertk.1473]

Da kauf ich mir lieber einen Lötkolben.

[@MiniTechnicus]

Es handelt sich um ein Bildungs- und Freizeitprojekt. Das Produkt kann verwendet werden, wenn Sie keinen Zugang zu einem Geschäft haben oder wenn Sie ein Lot zu einem Zeitpunkt benötigen, an dem das Geschäft nicht geöffnet ist. Es besteht auch die Möglichkeit, dass sich jemand den Kauf einen Lötkolben nicht leisten kann, da viele Besucher des Kanals aus sehr armen Ländern kommen. Danke für die Antwort! Ein guter Tag!

[@norbertk.1473]

@@MiniTechnicus Das ist dann auch verständlich👍

[@AliAli-ev2ep]

لا تعمل

[@MiniTechnicus]

إنها تعمل. تحقق من جميع الخطوات وكن حذرًا بشأن قوة مصدر الطاقة. شكرا لك على تعليقك! يوم جيد!

[@hammamegherbi4499]

Ca brule

[@MiniTechnicus]

En effet, la température est très élevée et peut détruire l'appareil s'il n'est pas utilisé avec des pauses. Merci pour votre commentaire ! Une bonne journée!

[@kohevnlk72]

ЕРУНДА!

[@desmondharney1185]

The graphite is very brittle. A complete waste of time

[@MiniTechnicus]

Not at all. As long as you don't push pressure on it, the graphite will resist.

[@desmondharney1185]

@MiniTechnicus still a waste of a good pencil !!

[@ChimdiIkpeazu-ii3xq]

A complete waste of time and pencil

[@LindenbergCa]

não gostei

[@MiniTechnicus]

No puedo esperar a ver tus videos. :)) ¡Gracias por tu comentario!

[@TheJoshuatuqvq]

Lol this is a direct copy of Made You Make video even the song is the same

[@MiniTechnicus]

I don't understand.

[@श्रीरामजुन्ने]

FAke

[@MiniTechnicus]

Not at all. I invite you to test this invention by yourself. 😉

[@minoo9475]

That's lie

[@MiniTechnicus]

Thank you for your comment! You can replicate by yourself. 😏

[@mckarak174]

@@MiniTechnicus mkkoooo0p

[@mckarak174]

@@MiniTechnicus k

[@АлексейСтепанов-о9д]

Мастер класс по заточки карандаша..

[@MiniTechnicus]

Йода - мастер заточки карандашей. Спасибо за ваш комментарий! Хорошего дня!

[@motivationalshortvideo-u4t]

Fake video

[@MiniTechnicus]

Not at all. As you can see in the comments, other users made the same soldering iron using this tutorial and it worked.

[@ngamminhao5816]

This video is called fake trick 😊

[@MiniTechnicus]

Not at all. The soldering iron works, as you can see in the video. You can replicate everything if you want. Thank you for your comment! Have a great day!

[@Pomerinka125]

fake

[@MiniTechnicus]

Not at all. You can replicate by yourself. Have great day!

[@parasaramshinge4469]

What a noncinci😂😂😂

[@MiniTechnicus]

Noncinci? What means? Thank you for your comment!