How to make Spinner Bangles

[@isabelrowan6776]

Ingenious! Would sterling silver for the main bangle work as well?

[@artistjefffulkerson4327]

Yes! I call the main bracelet the bangle and the small ones spinners. I've made both out of sterling, copper and brass, although the brass is hard to bend for the bangle.

[@isabelrowan6776]

Wow! That’s great! Thank you so much!

[@karineweisshuhn-atelierkap8627]

Hi Jeff! I see you used 24g, isn't it a bit thin? What would be the thickest you would suggest that we can use with this tool? Thanks!

[@artistjefffulkerson4327]

24 gauge works well because it's easier to form & once you put in the compound curve, even the copper becomes incredibly strong g.

[@johnmimist]

Artist Jeff Fulkerson hi Jeff, but as far as if someone wants a thicker look, how thick can the metal be with your tool?

[@wendyannh]

That tool is genius! Great video and demo, too.

[@artistjefffulkerson4327]

Thank you . Glad you like it!

[@wendyannh]

Artist Jeff Fulkerson Can you crank it down more to create a bigger flange on the bangle? Or will it tend to split the metal quickly? That can actually be a desirable effect, when done intentionally - and is something I do actually want to do. I can’t afford the giant dapping tools to do it with, though, nor do I have the strength, plus I live in an apartment, so noise is a huge issue. I assume you can also use the tool to make rings, obviously as long as they are bigger than the bolt?

[@artistjefffulkerson4327]

@@wendyannh You can't use the disks to make rings as they are too big. You can crank down the disks until they touch each other. How much flare you get will depend on how wide and how large a bangle you make. typically, the metal only splits at the solder joint and its pretty uncontrollable.

[@wendyannh]

Artist Jeff Fulkerson Thanks for the info! Any chance you will come out with a similar setup for rings? I should be more able to do those with dapping punches, but the noise would still be an issue. I’m always looking for ways around that!

[@artistjefffulkerson4327]

@@wendyannh Kevin Potter made one. It works OK.

[@pollylarue4521]

I bought this 2 years ago and haven't gotten a chance to use it yet... I finally bought a copper spinner bracelet (made with it) from another jeweller in my area 😂. She has a rolling mill so had a cool texture on hers, that I won't be able to get when I finally start making these.

[@artistjefffulkerson4327]

Use a hammer or stamps to get textures. Just have fun with it!

[@pollylarue4521]

@@artistjefffulkerson4327 I plan on it! Just got my work area put back together after a long time, and am getting excited to make things again.

[@karenpettinelli]

Question. I understand that annealing before squishing is required. Will the bangle start to work harden when you polish before squishing?

[@artistjefffulkerson4327]

Polishing shouldn't work-harden the metal at all.

[@samuellaramsey5963]

Will you be in Tucson this year?

[@artistjefffulkerson4327]

Sadly, no. First time I've missed it in 10 or 12 years.

[@artistjefffulkerson4327]

I just saw this. It was in my spam. As you may have already figured out on your own, no, I won't be in Tucson this year. first time in 10 or 12 years!

[@Gripco1]

Hi Jeff! When will this tool be available again? Every time I check, it’s not avail.😢

[@artistjefffulkerson4327]

I have some on my site right now. artistjefffulkertson.com

[@bevperina3869]

Awesome can not wait to use it!! Whooohooo Jeff!!

[@dianalane4702]

OMG! I want this tool! I checked and it's very affordable.

[@artistjefffulkerson4327]

Glad you like it. I have a few on my site right now artistjefffulkerson.com/collections/jewelry-tools/products/anticlastic-forming-disks

[@silvermavin]

What is the smallest bracelet length that can be used with this tool? I want to make some child sized bangles.

[@artistjefffulkerson4327]

The smallest you can go is about 7.25" to 7.5" circumference

[@susanm.obrien2016]

Hi Jeff! Great tool! Can you tell me if you plan on having more in stock soon on your website? My fingers are crossed! Any way to get on a waiting list or be notified when they are back in stock? Thanks so much! :)

[@artistjefffulkerson4327]

They're on order, should have some in the next couple of weeks.

[@pollylarue4521]

This tool looks great! Can you use copper solder, or do you need to use silver solder? (My copper solder seems strong but brittle.)

[@artistjefffulkerson4327]

I don't like copper solder because it's brittle, expensive and it isn't really copper in color. For copper bangles, I use medium silver solder. You can either leave the tiny silver line or plate the copper in old pickle.

[@pollylarue4521]

Thanks Jeff! What's the largest diameter / interior circumference you can make? I have a customer asking, and I haven't gotten a chance yet to set mine up.

[@missybarndt2712]

Hi Jeff! I bought this tool from Halstead a few weeks ago but I somehow managed to get it stuck, and not can’t get the nut to move. Any advice you can offer? Thanks!!

[@artistjefffulkerson4327]

It sounds like you might have stripped the bolt/nut threads. First, to un-stick, you hopefully take a big wrench and a lot of elbow grease and loosen it. Second, if you can't do that, you may have to cut the bolt off. I had a student do this in a class once and all I could do was cut it off. The REAL question is why? Why did this happen. Two theories: You may have worn out the bolt and used it one too many times or you may have tightened it all the way down to where the two disks hit each other and kept trying to tighten to get a little more bend in your bangle. The first problem is easy: when the bolt starts to throw off little bits of metal, buy a new one. They're only about $1. The second problem just takes a little 'feel'. You should never have to exert tremendous pressure turning the nut. When it gets tight, that tells you that's as far as you can go, so stop! Hope this helps. Let me know.

[@missybarndt2712]

Artist Jeff Fulkerson thank you so much!!!! I will try that tonight when I get home from work.

[@Ashnurse25]

Sweet!!! What gauge do you use for the bangle???

[@artistjefffulkerson4327]

I use 24 gauge

[@pollylarue4521]

What's the largest diameter / circumference bracelet this makes? P.s. I just ordered mine, along with 24g 5/8" copper bracelet strip, and some medium silver solder!

[@artistjefffulkerson4327]

9" is the absolute max, 7.5" smallest

[@laneyclark4238]

Hi Jeff, I picked up the bracelet forming disks at Tucson from JewelryTools.com You all were also offering precut copper strips. Can you tell me what the lengths are on those? I can't seem to find them on their site and thought I would make my own. Thanks much!

[@artistjefffulkerson4327]

I cut mine 5/8" wide. You'll make them whatever length you need to fit your wrist

[@crowsandshinythings2796]

Hi Jeff, the spinner Bangle maker that you are selling is it the same size as the one in the video? I bought one :)

[@artistjefffulkerson4327]

Yes

[@Dharlanna]

I'd like to know where to purchase as well, thanks!

[@artistjefffulkerson4327]

Sorry I didn't get back to you sooner. I just saw this. I have a couple right now www.artistjefffulkerson.com

[@joyceeberner]

OMG... Genius!! I have to get one and add spinner bracelets to my repertoire I love making spinner rings & have designed something like that "In My Head" for simplifying the bends in one process. I originally got the idea 2 yrs ago while at a boating surplus store and noticed the shape of the thermo plasticized rubber rollers, used with anchor winches. Obviously too big but your concept of 2 parts with rod in center is exactly what my idea was. Who does one go to about getting a design fabricated?

[@artistjefffulkerson4327]

When you say "get a design fabricated" do you mean a tool or the spinner bangles?

[@joyceeberner]

When I say fabricated.. I mean a tool, similar to yours but for rings.

[@artistjefffulkerson4327]

I went to a machine shop. Understand, this tool is patent pending so you can't just go out and make ones like it. Besides, everyone uses dapping punches for rings.

[@joyceeberner]

Oh no; You misunderstood.. I would never copy your design. I actually went on your site to buy your tool for bangles. 😀 How Long before restocking?? I'm interested in having My Design for Rings made. Yes, I too use dapping punches, as well as the back of hammers. Thank you for your response. Merry Christmas!!

[@artistjefffulkerson4327]

They are supposed to be in tomorrow or Monday. I did a pre-sale and I only have 2 left!

[@huskyfluffy]

Genius tool.

[@NanaNan1]

I’ve got it .. I bought it as soon as it came out - 2 grandchildren later -I’m finally trying it today to go with spinner ring. Thanks 🙏

[@reneemendola3408]

Can you tell me where to find the anticlastic forming tool? It doesn't seem to be on the Eurotool website.

[@artistjefffulkerson4327]

The first 50 are sold and we're getting some more. I'm hoping to have them up on my site in a couple of weeks. Check my site www.artistjefffulkerson.com

[@pollylarue4521]

Renee Mendola : www.rings-things.com also has this now!

[@jaywholoveseveryone1721]

♥ .•:*¨¨*:•. ♥ Terrific demonstration, explanation and presentation! ♥ .•:*¨¨*:•. ♥

[@crowsandshinythings2796]

I think the silver wire slipped off....?????

[@artistjefffulkerson4327]

Not sure what you're referring to. Did the spinner come off after bending? That means it was too big to start with, otherwise they stay on.

[@guloguloguy]

Jeff, I really appreciate your very enthusiastic, and informative video, here, but, I can't imagine anyone actually wearing all of the beautiful jewelry you had on, while working in their workshop!... Isn't that going to be somewhat of a safety hazard, as well as causing damage to your jewelry?!....

[@huskyfluffy]

guloguloguy he's not working in his studio, he's telling us about a technique.

[@joyceeberner]

I was actually admiring the jewelry he's wearing! As other reply, your suppose to be interested in his technique. Just say thanks for the technique.. and stop unnecessary criticizing. Merry Christmas!

[@artistjefffulkerson4327]

Actually, if you've ever taken a class from me, I do wear all that jewelry. I do take off my rings when I am polishing or using LOS.

[@Gripco1]

guloguloguy he’s not working in his work shop, he’s doing a simple demo. Not fire, no rotating tools, no hanging chains on him. He is a gorgeous jewelry maker, who teaches and sells his jewelry. To not wear it would be sad.