How to make SPOOL for ARRMA speed runs (+most 1/8 rc cars)

[@kentrapnell9905]

This is so cool of you to share such info. Thumbs up for sure!!

[@brockchauvin2573]

thanks for the info. I made me one but I used a motor shaft out a burnt castle motor I had for my spool shaft. thanks again for sharing this.

[@randythomas1945]

Best video I have seen in a long time. Thanks for sharing this info bro.

[@bishopnick777]

Kill Mode RC turned me onto your channel bro. This spool is on my todo list now for sure. Thanks for sharing your knowledge and keep up the good work.

[@mrcleanupman804]

great vid. with your help I finished a spool in about an hour.

[@rclife9725]

Wow my brother we got the same collection I love your Typhon

[@locostse7en]

Thats Perfect just what i needed. Now I know exactly what to make myself....thanks guy

[@lightningdad13]

bro that video was great. we'll done. awesome info. Keep em Real and Keep em Fast

[@speeddemon2152]

Awesome video!!!! Car looks really good 👍🏼👍🏼

[@franksantarcangelo1950]

Awsome bro i'm kind of a newbie but not really I've been building things that go fast my hole life I love little tips and tricks for my new hobby been following your channel for a while was wondering when you were going to share !! Haha😄✌🏻️

[@philipjolley1015]

Nice vid bro. I'm gonna make one now. get rid of my 46t spur

[@jamesandonian7829]

You got a hobao huh? Lmao same problem here bro!!! Smallest pinion on eBay is 40t, still too big for me!!!!

[@soundcatcher9088]

im using hyper vse, where i can buy that 40T spurs?

[@thatsmyrc]

Sweet info man thanks a bunch going to look into making one of these. Just ordered up a Typhon to build up for speed runs only. Subbed as well.

[@zeregarcdragracing17]

Great video keep up the good work and thanks for the info.

[@TheDeterminedFisherman]

Very nice video! Thank you for the info. I might venture to making a spool for one of my projects one day.

[@RcAVENTURE.V.F.R]

Extraordinary brother, thanks for sharing

[@teslacybertruck750]

that thing is a bomb! Looks fast

[@joestricklandsr705]

Great stuff bro, thanks for sharing.

[@pharaohdd5250]

Hey bro are you back making spools

[@RCROOKIE]

This is fantastic thanks mate Im going to try and create one

[@jamestuling1488]

eh bud i was just looking at your great work but umm needed to know what spur gear do you use since your sold out.,,, I have everything else but I was looking at traxxas revo spur gear. it looks like you use a 30t pinion mod 1,,,now i i have a 30t pinion on my motor I havent done the measurements but will it fit as both 30t pinion as a pinion and spur put together will it reach to the tooth with my arrma typhon setup.....just tell me please what you use before I buy......

[@ianbryce3463]

Hey bro are you back to making the spools again yet? Last time I asked you you were not making them at the time...thanks

[@arrma-spartan7190]

very nice video Typhon is there any way you can lmk what set up your using as far as your esc goes and what to really go with as far as add ons to your ESC/BEC I'd def appreciate it, keep up the good work brother!?!?

[@jasonstephens2923]

How much are you charging for one of those spools. I would like to purchase one.

[@BASHERSUNITED]

Great video man! I'm going to have to get back into 1:8 scale now.... damn lol!

[@philh3041]

Great video am going to make one now 👍🏻👌🏻

[@MrRo2625]

The typhon drive cups that came up on Google are 7mm...are they still the same thing?

[@stevenheckman7179]

Hey buddy I just got a 39 spool gear for my infraction and I don't know how to put it together and I was wondering on if you could help me do it

[@JMSpeck]

Great video!!!! RCFL BROTHER

[@GracedWithRcs]

Great info. Great advice 👍 I appreciate it.

[@streetdreamz8056]

great work typhon! your spools should sell for sure. 👍👍

[@natemorte]

Those are some big ass dog bones ,kinda surprised the outdriveshafts are 5mm. Good to know for future builds.

[@mrmontgomery526]

Hello sir haven't caught up with any of your updates but have a question are you making any customs shafts just the shafts or the whole assembly?

[@rccustom6726]

Where can I get that Cap pack you have there? I do have Cap pack on my TYPHON but it has 5 on a straight line but I rather have that one you have cuz they look a bit bigger then the one i have on it. Thanks

[@mumforddale1]

thanks alot for the format brother!it really helped me alot!rc4l

[@tYpHoNrc]

Thanks bro ii'm gonna drop update vid soon

[@mumforddale1]

great center spool!!!!buy it or do the mod fellas it works and makes your arrma powerful !!thanks typhon for the info bro!

[@TheFelco]

what kind of c-cvd outdrive cups are those..

[@rccustom6726]

What shocks are those you have there? Thanks

[@MichaelLee-rq2bo]

What's up Typhon. I have a concern about the spool. I have an Arrma Senton and the spool isn't a problem for me to make and install thanks to your video. My problem is keeping my RC on the ground!!! It goes airborne about 70 MPH at nowhere near full throttle. What do you recommend? Thanks

[@pktillidie]

Michael Lee put some lead weights on the front end

[@cwatson42785]

Michael Lee I believe proline or another shell company sells an aftermarket sc body that has vents at the end to stop that parachuting effect. Or you could take a Dremel to your stock body and cut some slots for air to pass through.

[@taylorearley1525]

Make some more vids bro, I’m modding mine and need some more good ideas. Plus you explain stuff good

[@rclife9725]

So I got a 29 t pinon and the 50spur is that considered 1/1

[@JAMESTAPPJR]

Do u have Anymore? I need one for my Talion

[@morrislee2741]

How much is the whole setup for the infraction ?

[@SlowBurn613]

hey sweet vid wondering where you got your diff caps from ?

[@tYpHoNrc]

8th Wonder Pcs poseidon rc

[@mikeinvegas1]

I know video old. But is it recommended for just 105 mph run?

[@jacobdahlmann7024]

what size pinion and spur are you using?

[@chriswiggins8193]

Can u make a 1/10 scale for kraton 4s

[@BlueEyesRageTv]

Perfect! Thanks man!!!

[@420rc8]

sweet rig

[@trailersworld4483]

Can you help to make a spool for my caster 1/8buggy?

[@losidbxl-e6782]

Was up my brother....can you make me a custom spool for my arrma typhon? That would be awesome

[@tonysmith6198]

Great vid bro

[@Mililafait]

hello, how did you connect the capacitor to the drive? Thank you for your reply

[@tYpHoNrc]

what?

[@andrewap77]

GO!!!!! ARRMA!! The take over is coming.

[@noeysfastrc3291]

Hey brother are you making any spools for sale?

[@rpetit2079]

I am willing to buy 3 of these if you still have them available.

[@nicholasduckett3463]

Where do i find a 5mm shaft

[@brianrucker1874]

Hey bro I’d like one of these spools if possible but will it work for a losi eight 3.0 ?

[@oneeyemonster3262]

I order M-1 for the REDCAT...It looks like it's just a metal 46T spur (32 pitch) There's just a flange held in place via a pin. This allows you to change the spur size. it should mount right into 1/8 scale buggie center diff.... The metal different mount are actaully only $5...if you shop around. It;s just a couple pieces of thick aluminum ..FFS I;m actually doing for a T maxx electric conversion...chuck that POS plastic gears transmission of locking it out to a single speed...ect and actaully cost more. It's just going to mount on the center aluminum skid plate. This way I can use 87-90 mm..1/8 scale METAL dogbones or cvd. I need to get rid of all those damn plastic drive lines on the Tmaxx. It's actaully 1/8 scale size...With a Brushless it would snap those plastic parts quick...as many people figure out. It needs to be 1/8 size dogbones because the truck is almost 10lb...FFS Anyways....you probably can just slip a smaller spur with a pin slot in place of that flange.....

[@rccustom6726]

It looks like a lot of work but definitely worth the try 👍🏼

[@rcfeene9446]

Hey brother are you going to be selling spools again soon?

[@vinceooo1]

How much do you charge for this unit?

[@joekaufman6456]

Hey tYpHon are you still making the spools for the arrma typhon.

[@tYpHoNrc]

Joe Kaufman email me

[@drewgumbel297]

Are you still making them?

[@alwaysgreener28]

How much for a spool?are they still available?

[@vinceooo1]

THAT'S A NICE VIDEO. TELL ME I LIVE IN LOS ANGELES. HOW LONG WILL IT TAKE YOU TO SEND ME OME

[@JSprayaEntertainment]

i need a sabertooth center spool/Diff

[@gussingleton4136]

Can you make one for me 👏. Also how much would it be

[@mtctookie25]

Nice brotha, can you make a spool for my Vorza?

[@kyledwayne33]

mtctookie25 cookie, for the vorza I use the ofna dm1 8MM center diff shafts....very easy to do!!

[@mtctookie25]

Dwayne Moore Moore You have a video on how to do it?

[@kyledwayne33]

Haven't made videos in a long time, since my speed runs days back about 3-4 years ago....too many haters on youtube, now we just run our cars at our local airport here in florida. We are in excess of 180+MPH....4 years ago I was posting videos of speed runs but like I said too many haters. Next time I do a vorza center diff for a customer I can definitely post it for you. Not a problem at all!! It's great to see alot of people still in the sport of speed runs. I'm currently running a HEAVILY MODIFIED M4....almost nothing stock. It's hard to get past 140mph with stock diffs because of the gear ratio, but I can say we do have a durango truggy on 3s doing 127mph....durango cars are amazing and have great diff ratios and also have worm gears for pinions in the diffs....check them out.

[@mtctookie25]

Who makes the M4? If & when you make a diff be sure to make a video. Hate to see you leave the speed game on KZbin, need to come back man.

[@natemorte]

Making the spool is the easy part. Finding the right length dogbones is the headache. From looking at the pics of the Vorza diff. it uses male out drive cups. When using a shaft the female ones stick out further cause it needs space for the grub screw. Also some manufactures measure end to end ,others pin to pin. I use a Vorza dog bone on my HoBao because it's shorter. (8x110)pin to pin. Your gonna need something shorter than that. These are the cup joints for a 8mm shaft if you go that route. HPI #86083

[@byronmorris6378]

Yooooooo, ill purchase 2 of them, 1 for my rc8.2e and the other for my mugen mbx6 eco

[@WIGSPLITTERSRC]

nice now i can quit runnin this center diff

[@kccrosson9761]

Okay so typhon 3s how in the hell would you make a spool for that?!

[@6co]

U might need to upgrade to a 6s typhon its a totally different setup🤙🏼

[@kennethedison2980]

Are you still making spools for sale man ?

[@hittingbricks6398]

How much for a spool

[@rpetit2079]

Can I buy one from you bud?

[@mraudioiscool]

Wow what a video and all you have to do is just lock your center Dif.

[@thatsmyrc]

ps big thumbs up

[@MrDwight107]

I'm interested in a spool

[@jessie38supercharged]

Did you hear the joke about apple make their own talion? They called it the .......

[@rpetit2079]

Try to email you and it's not going through

[@mumforddale1]

need one bro!34t

[@ianbryce3463]

Let me know please and thanks

[@rpetit2079]

Telling me email is invalid

[@mumforddale1]

halla at me bro!

[@killmoderc6815]

Thanks, I took your idea and changed it up a bit. Here's a video of how I did mine. Let me know what you think. kzbin.info/www/bejne/faGpgZaMpc2cgbc

[@adamzeller7249]

well 2wd helps:(

[@BigChuck_1]

RC Center Diffs are HIGHLY overrated.