How To Make String Portrait Template | String Portrait Creation | String Art Basics Tutorial

#stringportrait #stringart #stringportraittemplate
Learn how to make the template for the string portraits and also how to build the portrait itself. You can use below link to generate the template for your string portraits:
make.alinedeco....
Materials used in the video:
1. MDF Board 45 cm in diameter and 1 cm thick
2. Polyester thread, black in colour, weight 80
3. Galvanised nails - 180 in count
4. White circular paper for background to the portrait
In case of any questions leave a comment or reach out to me at [e-mail]
Happy Crafting,
Genie Crafts

[@pawanprajapati3572]

Genuine guys, thanks for these kind of knowledgeable videos

[@GenieCrafts]

Welcome 😊

[@pawanprajapati3572]

@@GenieCrafts brother kisi bhi pic ka caricature kaise banaye is par video bnana if possible thnx 😊

[@thunderbolt8048]

Amazing sir, I learned a lot from your videos and love your way of explaining. Thank you so much

[@GenieCrafts]

Thanks 😊

[@DevisinghRathore1308]

Waiting & excited for Colour string art video please asap

[@GenieCrafts]

Already on my channel. Please check out

[@unnatijain2001]

Hey , u r work are really awesome .. i want to learn this from basic to advance

[@GenieCrafts]

Thanks. Please contact me on WhatsApp at 9819048334 for details on workshops

[@user-ik4jk9go1i]

My friend, help me urgently, I saw this from you, I went and bought nails, I bought a frame, but I don't know if it is 1 cm between 1 and 180, mine is 47.5 in diameter and I don't know what to do, I did everything without applying it, but I stuck with this, I am a Turk.

[@GenieCrafts]

Replied u over email

[@aericshow5594]

How do you know that this nail no. Is 20 or any no.?? U count each nail every nail every time???

[@GenieCrafts]

Sorry didn’t understand what you are asking. Can you elaborate more on your question.

[@harshitjain9878]

Wow loved it

[@GenieCrafts]

Thanks 😊

[@user-ik4jk9go1i]

I want to send you a picture, how should I make the nails, in what cm should I make them, I would be very happy if you help me, I need to have them ready in 6 days.

[@GenieCrafts]

Replied u over email

[@MasterpieceArtStudio]

Thankyou sir You are very creative & passionate for art

[@GenieCrafts]

Thanks a lot 😊

[@simadrikirankumar8936]

Perfect explanation…. Helpful

[@GenieCrafts]

Thanks 😊

[@shrishtipathak5654]

Sir can you suggest some good nail gun for string art...please i really need nail gun...

[@GenieCrafts]

Sorry. I also have been searching for right nail gun. So far no luck

[@aishwaryaramasamy933]

Thanks for the detailed explanation really great art work :) Can you do a video on colored portrait string art

[@GenieCrafts]

Still learning that.

[@_janani_art_gallery_]

Between the nails how much space??using in scale...5mm is too short right??

[@GenieCrafts]

5 mm is good enough but if u are not comfortable, u can keep 1 cm distance also

[@Monsh_gifts]

If 300 nails and wat is the diameter of MDF board and where u buy mdf circle board

[@GenieCrafts]

U will need minimum diameter of 18-20 inch. U can buy online on amazon

[@mr_soundear]

Genie, in this video, what is the thickness of your thread, you say thread must be thin but how much thin ? Plz tell me the thickness of thread

[@GenieCrafts]

In thick one I used weight 60 thread

[@mr_soundear]

@@GenieCrafts which thread you suggest to me for this art :- 60 wt 3 ply or 60 wt 2 ply

[@GenieCrafts]

@mr_soundear ply only refers to strength of thread. But you can work with any option of the two

[@mr_soundear]

@@GenieCrafts thanks Genie 😊

[@bender8256]

Thanks for the amazing video! BTW: I've seen people doing color portraits with strings (I mean like an actual photo with many colors) - any idea how to do those?

[@GenieCrafts]

Thanks. Still working out the colored string portrait. Will take some time.

[@GuruPriyak-ks7uu]

I have got inspired through this art sir.can u please teach me sir if u conduct any class for string art it's a kind request from my side which will help me to relax by doing this art

[@GenieCrafts]

Please WhatsApp me for enquiry on workshops

[@GuruPriyak-ks7uu]

@@GenieCrafts can u share WhatsApp number sir

[@rogeriosouto6261]

Thanks for sharing! You are wild! Fantastic...God bless you!!

[@GenieCrafts]

Thanks and welcome 😊

[@MuruganMurugan-s4g]

I want the screenshot of the sequence

[@GenieCrafts]

You can generate it on the website mentioned in the video description

[@MissPourchie]

The video ive been looking for for so long thank you !! I juste have a pbm i cannot drag the photo to center it 😔 Thanks for all the explanations

[@GenieCrafts]

Thanks and to drag the photos to centre use left click of mouse or the touchpad

[@femkeoosterveld4845]

first of all, thank you for making these videos. i saw string art on social media en immediately wanted to make one of my own. But i didnt know where to look or search on how to do it. I ended up here on your channel and i havent started yet, but i am excited to start thanks to your clear explination videos. But i have a question, how do i know if i need to number from 0-179 or from 1-180? Im sorry if this question is asked before but i couldnt find it in the comment so i hope you can help me! Thanks!

[@GenieCrafts]

Some websites start the numbering from 0 and some from 1. So looking at the template I can determine from where to start numbering, 0 or 1. But if you are not able to do so do not worry. Suppose you number from 0-179 but your template does not have 0 then in that case you can treat 0 as 180. Similarly if you numbered from 1-180 but you template has 0 then in that case you can treat 180 as 0

[@femkeoosterveld4845]

@@GenieCrafts wow you answered very fast! And your answer is very helpfull, I understand. Thank you so much!

[@GenieCrafts]

Welcome 😊

[@renustreasurekitchen6401]

Thanks beautifully explained everything today i will watch your all videos 😅😅 1thing i want to ask that all pictures will not work in that but i checked n i got answer in your comments section.....thank you so much

[@GenieCrafts]

Happy to be of help :)

[@Billo-artist]

Tnk u bhaiya o wala website jo ta na o be open howa ta bss prob e ty ke mobl mn process nahi horaha ta mn ne jab laptop pr try keya tu o hogeya , by the way tnk u for uploading this video for us 😊😊

[@GenieCrafts]

Welcome 😊

[@shahricha4874]

Thank you so much for this video. Its very very helpful! Where did u done nailing in MDF its by urself or somewhere else??

[@GenieCrafts]

Everything on my own 😊

[@Mouneswar-kn5gd]

Bro please tell how many cm in diameter

[@GenieCrafts]

34 cm diameter

[@godsplanartbyrobertpiret9028]

Thank you very much dear coach

[@GenieCrafts]

Welcome 😊

[@itselle2142]

This is very helpful. Thanks for posting this.

[@GenieCrafts]

Thanks a lot 😊

[@padmajaappadurai4777]

The starting pin can be from anywhere or there is a certain position for it?

[@GenieCrafts]

You can start from anywhere

[@padmajaappadurai4777]

@@GenieCrafts thank you

[@rociodealba]

I would like to use a very large circle. If I select 180 and 3000 using String Art Generator, how will I know how to change the image? Your videos are the most helpful I have found. Thank you.

[@GenieCrafts]

Distance between your nails should not be more than 8mm. So if you choose bigger board then your nail count will also increase accordingly. If these is too much gap between nails like 180 for a large board, the edge of your portrait will not look good due to excessive gap between the nails

[@rociodealba]

@@GenieCrafts That was super helpful. Thank you!

[@GenieCrafts]

Welcome

[@niladhrysinha6137]

What kind of thread we use?

[@GenieCrafts]

I use polyester thread. For more information check out this video on my channel kzbin.info/www/bejne/Z5y5fqWJbLiKla8si=pU5kildaJDCbCPL2

[@lokeshsivagnanam7728]

Dear friend, thanks for the clear narrative. How u make marking for nails. How you split each nails exactly at 2deg apart? Pls shed some light on it.

[@GenieCrafts]

Thanks. I have briefly explained that in my first string portrait video. Planning to make a separate video on prep of board for string art. Coming soon.

[@lokeshsivagnanam7728]

@@GenieCrafts thanks mate..

[@GenieCrafts]

@@lokeshsivagnanam7728 please check out this video kzbin.info/www/bejne/rqC3Xmqwa9Z0qs0

[@niraimathi6943]

How much nails space should there be?

[@GenieCrafts]

Minimum 5 mm gap between two nails

[@niraimathi6943]

@@GenieCrafts tq

[@maheshbabukintali]

Hi sir, can you please tellme which type of paper are you pasting to the mdf board?

[@GenieCrafts]

I used to paste 300 gsm paper, but now I paint the board with white gesso

[@praveenkumarr4100]

How to purchase MDF BOARD

[@GenieCrafts]

Available on Amazon online

[@ahmadnusry9766]

Sir, how do I determine the frame? I mean how many centimeters it is, and I also want to know that there are different pictures for the picture. Thank you very much.

[@GenieCrafts]

Answered on other comment

[@ThisisLevani]

Thank you for sharing. How did you manage to get the nails in circular fashion so symmetrically?

[@ThisisLevani]

P.S. I watched your latest video and all is clear 😇 excellent!

[@GenieCrafts]

Please refer to below two videos. First video on how to do it manually and second video on how to do it using technology kzbin.info/www/bejne/m2LPn32bbLV9b5I kzbin.info/www/bejne/rqC3Xmqwa9Z0qs0

[@harmjan7599]

Can you make a video about making a string art in more colors?

[@GenieCrafts]

Trying to make algorithm for that

[@user-ik4jk9go1i]

Teşekkürler.

[@GenieCrafts]

Replied u over email

[@Hapit_TV]

How to not get flip, where to put the zero from left or right where the number 1 start from up or down, so not its not flipped?

[@GenieCrafts]

It does not matter where you put zero. Once you have put zero you start numbering the nails in clockwise direction. That way you will not get the flip

[@susmithareddy9001]

Please give link for thred please bro

[@susmithareddy9001]

Please brother please give me a thread link used For this art please

[@GenieCrafts]

I buy from local stores. Don’t have online link

[@GenieCrafts]

I buy from local stores. Don’t have online link

[@nipunsharma1577]

Which inch nail you use

[@GenieCrafts]

Almost 2 am long nail

[@itselle2142]

Is it only circular portraits or can you make other shapes like squares?

[@GenieCrafts]

Yes we can make squares. There is a video posted on on my channel

[@OrdinaryME123]

what if we use less than 180 nails?..does the picture come clear?...

[@GenieCrafts]

Lesser the nails, worse the output will be

[@_janani_art_gallery_]

Ur suggest nails maximum??? ​@@GenieCrafts

[@nandkishor_ravat]

Sir what is the diameter of the circular MDF board you are talen

[@GenieCrafts]

This specific board has a diameter of around 35 cm

[@SRKUNCHAM]

How can we overcome from the dust & moisture. As it is a wooden board, there are chances of breaking when they absorb moisture from the air & the dust may fall on the thread that makes the art not clear after days. Please, Can you suggest any tip for these type of problems.

[@GenieCrafts]

Valid concerns. To avoid the issues, the board needs to be prepped with wood varnish and the entire artwork needs to be framed to avoid dust and moisture

[@SRKUNCHAM]

@@GenieCrafts Yeah we can frame the wooden board. But what about the thread?

[@GenieCrafts]

Once framed, it remains safe for a long time

[@SRKUNCHAM]

@@GenieCrafts framed? You mean like circular glass on the top of nails & fix it?

[@GenieCrafts]

No put entire thing in a square shadow box

[@user-tl3nk6lh9z]

IF MY NAILS ARE NOT PERFECTLY PLACES NI THE HEIGHTS IS IT OKAY

[@GenieCrafts]

It will not look good after final work but it will not impact ur weaving process. You will get consistency after practice or u can get a carpenter to get it done

[@racharlakeerthi-dv2qi]

Hello sir i have seen your videos those are really amazing n got inspired but i want some clarity that if i use 200 nails which size circular board should be taken and what distance each nail should be placed. It will be greatful if u answer me

[@GenieCrafts]

Minimum size of a board Afro any string portrait should be 18 inch diameter. As for how to calculate distance between nails please watch this video kzbin.info/www/bejne/aJrPlZ6ooMqmm6ssi=MjsG2g67Wf_VdAfJ

[@crazyrishi9710]

Can I use plywood instead of MDF board

[@GenieCrafts]

Yes, you can. However hammering nails would be harder on plywood as compared to mdf board

[@crazyrishi9710]

@@GenieCrafts ok , thank you 😊

[@shrishtipathak1040]

Hello, thankyou soo much for this I really appreciate it. 🌻 But i have a question. What does the line width and transparency mean? Also i am making a string art potrait with 0.12 mm thick thread...will it be good?

[@GenieCrafts]

Line with means Thickness of thread. Not sure about transparency. I don’t know Thickness in mm but if the 0.12 mm Thickness is weight 80 polyester thread, then yes the thread will be ok.

[@pritamkoruri99]

1st of all thanks to sharing this tutorial.tell me one thing what is distance between each nail. Plz tell me.

[@GenieCrafts]

It varies but normally it’s 5 mm. Watch these videos for more details - kzbin.info/www/bejne/aJrPlZ6ooMqmm6s kzbin.info/www/bejne/b6SmgpilrZydbqc

[@pritamkoruri99]

@@GenieCrafts thanks for your reply.i got your point.how can I make over square potrait in Alinedeco? I couldn't find there square option.

[@GenieCrafts]

It’s not there. For that you have to use the Russian site. Check out these videos: kzbin.info/www/bejne/fnikgp1sm9qad9k kzbin.info/www/bejne/o6HUfqR6jLumedE kzbin.info/www/bejne/pJncmKybhNuCl6c

[@pritamkoruri99]

@@GenieCrafts just tell me one thing. In the circle potrait from which side should I start the 1st nail? If I put the circle in front of me then 1st nail start from which side up/down/right/left? Hope you understand my point.

[@GenieCrafts]

Varies from program to program. But in general 3’O clock is the place where you put the first nail and then move clockwise

[@priyesh_youtuber]

Love you

[@GenieCrafts]

Thanks 😊

[@athul7891]

Is it numbering from 0 - 179 in carboard. You marked number in 1 - 180??

[@GenieCrafts]

It’s 0-179

[@athul7891]

@@GenieCrafts Okk.. I had a dout is numbering starts from left to right on the half of the circle...??

[@GenieCrafts]

@@athul7891 clockwise

[@athul7891]

@@GenieCrafts Thanks for your reply❤️

[@athul7891]

@@GenieCrafts Thanks bro for the video.... I completed my 1st work❤️

[@antherrandomchannel5131]

Where can I find the thread used here and what is the price

[@GenieCrafts]

I package it from Amazon and here is the link Kavach Enterprise 6000 m + 6000 m... www.amazon.in/dp/B08TRDJ2VR?ref=ppx_pop_mob_ap_share

[@user-tl3nk6lh9z]

what thickness thread to use??

[@GenieCrafts]

Weight 80 polyester sewing thread

[@SandeepKumar-cf3cm]

where can i buy the mdf board

[@GenieCrafts]

Itsybitsy.in or you can also find on Amazon online

[@nipunsharma1577]

Please share the link from where you buy

[@GenieCrafts]

Itsybitsy.in

[@sindhukrishna5595]

Sir, 80 weight thread thickness?

[@GenieCrafts]

Regular sewing thread 😊

[@aishwaryaramasamy933]

what should be done if the thread gets over in the middle

[@GenieCrafts]

If it’s a commissioned project, then u need to restart, ideally. But you can tie the threads properly and trim off the extra length near knots. But always have sufficient length handy. In case the knot does not get covered by subsequent loops, it does not look good

[@aishwaryaramasamy933]

@@GenieCrafts Thanks a lot :) what should be the ideal length of thread needed to complete in one go for a portrait

[@GenieCrafts]

@@aishwaryaramasamy933 depending upon ur board diameter calculate length of one loop. Multiply that by total number of loops in ur template and ur thread should be at least 10 m longer than that

[@anasensui4052]

Hi genie! Do you create square shapes for your string art?

[@GenieCrafts]

Yes, I will be doing that in future

[@anasensui4052]

Wow .

[@GenieCrafts]

😊

[@darkweB333]

Can you mention the store site where you bought the board?

[@GenieCrafts]

Check the website for ITSY BITSY store

[@darkweB333]

@@GenieCrafts Board name?

[@GenieCrafts]

Mdf board

[@darkweB333]

@@GenieCrafts How many inches of board are needed for 220 pins?

[@GenieCrafts]

More than 30 inch diameter

[@EE_ARTIST]

Board size kya hai ???

[@GenieCrafts]

18 inch

[@EE_ARTIST]

@@GenieCrafts can you provide a link of board 😂 it's hard to find it

[@GenieCrafts]

@EE_ARTIST itsybitsy.in

[@AkilaKalhara13]

I upload my portrait. But it didn't work. can you help me

[@GenieCrafts]

What is the error u r getting? Also are u doing this on mobile or laptop?

[@AkilaKalhara13]

@@GenieCrafts I used my laptop. I uploaded my portrait but output not exposed my face. can I get your contact to send my output.

[@GenieCrafts]

All photos don’t work. It u can send me output on [e-mail]

[@nipunsharma1577]

How many nails you use

[@GenieCrafts]

Depends upon size of board. For smaller board u will not be able to use as many nails as you can for a larger board. For this board I have use 180 nails at a separation of 2 degree each

[@diljitht6361]

😍

[@GenieCrafts]

Thanks 😊

[@nipunsharma1577]

Bro I have 18 × 18 round board which inch nail I use to fit around 200 nails on it

[@GenieCrafts]

It’s not big enough board, nails will be very crowded

[@athiraathirarajeev2906]

Board - thikness and Size?

[@GenieCrafts]

11mm thickness 34cm diameter

[@toyboygifthouse01]

Is that any number reading app

[@GenieCrafts]

I don’t know any but I am sure there would be some app out there

[@rishavkumar9958]

If we start with number 1 as mentioned in the template it will create wrong portrait or what

[@GenieCrafts]

In case your template does not have zero, you can treat 0 as last number. So if your board has 0-179 then 0 becomes 180

[@rishavkumar9958]

@@GenieCrafts no no I understand what you are trying to say but my question is if I start with 1 then what will happen......my work will become wrong or what....?

[@GenieCrafts]

Start with the nail which is starting point in your template.

[@gopalbapari8084]

Why start 0-179 , total pin 180 (1-180)?

[@GenieCrafts]

Sorry your comment for tagged for review for some reason. The numbering depends upon the software or website you are using to generate the template. Some start from 0 and some start from 1.

[@Motu-q]

Sir i am unable to download app..

[@GenieCrafts]

It’s not an app. It’s a website and it will work in a browser only

[@udyatiDas]

How can we understand the radius of the circle??

[@GenieCrafts]

Normally when u buy the boards the seller will tell u the diameter or radius. But in case you don’t have the info you can follow below method Place the board on a piece of paper and then trace a circle around the board. Cut out the circle from paper. Now carefully fold the circle in exactly half. Then fold again in half to make it a quarter. By doing so you will get an intersecting point. Once you have the centre you can measure radius easily with scale There are other mathematical ways also but this is much simpler

[@udyatiDas]

@@GenieCrafts thank you so much for so instant reply. No KZbinr replies so fast.. Thanks 🥰 . You will grow more dear💕

[@GenieCrafts]

Thanks and Welcome 😊

[@farhanfarha4119]

Hlo bro plz you make board size

[@GenieCrafts]

Sorry did not understand ur question. Please clarify.

[@toyboygifthouse01]

I uploaded a face and output comes more darker

[@GenieCrafts]

Try to cover the circle with only face. Try with and without background. Lastly not all pictures work

[@manishjangid9119]

What is distance between nails?

[@GenieCrafts]

The distance is radial instead of in cm. For this portrait the distance between the nails was of 2 degrees

[@manishjangid9119]

@@GenieCrafts can we take 10mm distance for 30"×30" Inches

[@GenieCrafts]

@@manishjangid9119 please check out this video on how to accurately distance the nails kzbin.info/www/bejne/rqC3Xmqwa9Z0qs0

[@manishjangid9119]

@@GenieCrafts tq sir for video

[@nipunsharma1577]

What inch is this

[@GenieCrafts]

Around 17 inch diameter

[@Loyalty-test_2023]

How do I install the app on iOS phones

[@GenieCrafts]

It’s not an app. You can directly use browser to open the link provided in video description

[@Loyalty-test_2023]

@@GenieCrafts hi how about the thread art app

[@GenieCrafts]

Not available for iOS but it’s there for android

[@kevinreid3877]

where can I find the board with nails on it can I buy it from you

[@GenieCrafts]

You can buy but if u r not in India you will end up paying too much as the shipping cost will be a lot. Far easier to get the board and hammer it in. Boards and nails are available online on Amazon. You can search for mdf boards

[@kevinreid3877]

@@GenieCrafts thank you

[@am__ruth2966]

Mixed color thread art tutorial in photos

[@GenieCrafts]

Still figuring out right way to do it. Once I have it figured it out, will publish a tutorial on it

[@am__ruth2966]

@@GenieCrafts do it fast ok

[@am__ruth2966]

Try to upload this month

[@GenieCrafts]

If time permits then sure, but don’t hold your breath. I m currently occupied in 3-4 projects, so it might be few months before I perfect coloured string portraits

[@soniyaa8850]

Colour string art portarit website plz

[@GenieCrafts]

I am also searching for that 😃

[@gopalbapari8084]

Apne kaha 0-179 counting hoga but apne to 1-180 ki hay

[@GenieCrafts]

Both are same. You can go 0-179 or 1-180

[@nipunsharma1577]

How much mm thick is

[@GenieCrafts]

11 mm thick

[@prakash.yeager586]

Sir mdf board website

[@GenieCrafts]

Itsybitsy.in or Amazon online

[@pradeepchaudhary5996]

What is the thickness of MDF board used?

[@GenieCrafts]

11 mm

[@pradeepchaudhary5996]

@@GenieCrafts thanks for replying bro

[@user-kz3kw4jk1f]

what nail size to be use bro

[@GenieCrafts]

I use nails from 7 mm cable nail clip

[@kishoremuniramu]

What is the thread you use for portrait art

[@GenieCrafts]

I have used polyester thread weight 80. Or u also know it as regular polyester sewing thread

[@joshilzzs2761]

In string art only circle no square

[@GenieCrafts]

Please refer to below videos for string art in square frame kzbin.info/www/bejne/o6HUfqR6jLumedE kzbin.info/www/bejne/fnikgp1sm9qad9k

[@YinaVelez-ke6bk]

What is the link ?

[@GenieCrafts]

It’s in the video description. Please check out

[@ahmadnusry9766]

Sir, how do I determine the frame? I mean how many centimeters it is, and I also want to know that there are different pictures for the picture. Thank you very much.

[@GenieCrafts]

Answered on other comment

[@joshilzzs2761]

In string art only circle no square

[@GenieCrafts]

Please refer to below videos for string art in square frame kzbin.info/www/bejne/o6HUfqR6jLumedE kzbin.info/www/bejne/fnikgp1sm9qad9k

[@ahmadnusry9766]

Sir, how do I determine the frame? I mean how many centimeters it is, and I also want to know that there are different pictures for the picture. Thank you very much.

[@GenieCrafts]

Answered on other comment

[@ahmadnusry9766]

@@GenieCrafts I'm sorry, you can only tell me how much between the nails, please.

[@GenieCrafts]

If it’s a square board then u can measure with scale and space the nails equally but if it’s a circular board then the final distance between the nails will depend upon board size and how many degrees apart nails are. For example for a circular board, if u r using 180 nails each will be 360/180 = 2 degrees apart. Anyways for circular board I have prepared a tutorial on how to generate mail placement for a circular board. Please refer to this video kzbin.info/www/bejne/rqC3Xmqwa9Z0qs0 At the end minimum distance between the nails should be 5 mm for easy looping of thread, no matter what type of board u r using

[@ahmadnusry9766]

Sir, how do I determine the frame? I mean how many centimeters it is, and I also want to know that there are different pictures for the picture. Thank you very much.

[@GenieCrafts]

This kind of portrait does not look good on a small frame. So I recommend the starting size to be 20 inch diameter frame. On this size also I do not recommend to use more than 180 nails. The minimum separation between the nails is to be 5 mm but this will depend upon board size. E.g for same number of nails on a board of 15 inch diameter the distance between the nails will turn out to be smaller than for the board of 20 inch diameter. Pictures matter. What I have figured out through trial and error is that picture is to be of high resolution with good brightness to contrast ratio. Also when generating the template fill the entire area with the face of the subject. The bigger the face, the better the template will be

[@ahmadnusry9766]

@@GenieCrafts You mean how much bigger the picture is, you need to use more nails, for example, if it's 50 or 60 inches.

[@ahmadnusry9766]

@@GenieCrafts I'm sorry, I annoy you, but i haven't seen any place except your page that makes it so beautifully clear as you are.

[@GenieCrafts]

@@ahmadnusry9766 so first the board should be big so that the final output is not that dense. Secondly when you select an image, you have to zoom in till the circular frame only contains only face of the subject.

[@GenieCrafts]

@@ahmadnusry9766 not an issue. Please ask away.

[@joshilzzs2761]

In string art only circle no square

[@GenieCrafts]

Please refer to below videos for string art in square frame kzbin.info/www/bejne/o6HUfqR6jLumedE kzbin.info/www/bejne/fnikgp1sm9qad9k