How To Make The HARDEST Techno Kicks!

[@Clap_Codex]

I‘ve searched a lot for tutorials about making dark techno kicks/rumbles, and I can confirm that this one is the best out there. Most people don‘t know what they‘re talking about and their kicks sound like shit. You definitely know what‘s going on, good job!

[@alexwilcoxx]

This video is better, only 30 seconds and you get a great techno kick kzbin.info/www/bejne/q5aVd2aehtGmhKM

[@Huumf]

Can you do a long video on mixing?: panning, eq, mixing in mono etc?

[@varado17]

x2

[@PeterB95]

I would like this too

[@stealtime]

Also

[@ProfessorSaibertin]

Good call

[@OwlsHead44]

please!!!!

[@lucasramos5722]

I've been searching and studying about rumble and Techno's hard kicks for a long time, but I finally found what I was looking for: a Rumble made from nothing that doesn't sound muddy and strange while mastered. Thank you so much. Subscribing!

[@thejoshlewis]

Thanks for this tutorial dude very helpful, just started getting to grips making techno in Ableton and a lot of the WHY is lost on me at the moment with these techniques but good to follow and get my kick set up. Thank you

[@john.riddle]

i love how you get straight to the point with your videos, it makes them so much more engaging. thanks for your work!

[@simonbusshart1463]

What would we do without you? This was an amazing explanation, it feels like your doing this everyday like a Bass drum routine. Thanks alot

[@james82408]

thanks you just saved me $ when I was gonna buy a plugin to get the same rumble effect

[@reo7795]

Very nice, you really don't need an plugin for an fire rumble

[@tomvice]

Julian Earle is THA MAN! thanks so much brother

[@warskates]

This will defo help me get my kicks hitting harder . Was already halfway there but the little details will help me get the finish . Thx

[@simonkaye9209]

BIG BIG Julien

[@Shane-zo4mg]

Wherever that mid sustain sits in the sample I like to put a dynamic eq and mess with that sustain time with that frequency

[@DJFTLM]

one of the best techno videos I've ever watched. Good job as always Julien.

[@reo7795]

Thank you very much!

[@roarshak2179]

Buying your packs when I get paid homie. LOVE THE VIDEOS

[@kalbeeRaimer]

Love limiting my kick/bass group. Very common and effective!!

[@HalfGodHalfBeast]

I noticed the other day that with the amp if you turn the volume control down on the amp between about 5.8 and 6.8 you get a much different sound, the distortion character is different. Kind of counter intuitive but gives a nice sound especially when used before or after reverb in this kick rumble context. Also if using reverb instead of delay setting the predelay on reverb to around 220ish (actual value depends on bpm - 60000/bpm*2) you get an offbeat delayed reverb effect.This works well if done in parallel with delay i.e Dry Kick, Kick with delay, Kick with reverb. You can then add different distortion fx on each before mixing back together. I just gave away my secret!!! :-0 lol

[@Brositive]

Much love thank you!

[@heyyyyyyy795]

This helped a lot man

[@IcedNerdz]

Really good video. Thanks you for your advices.

[@dimitrovisch7785]

damn best techno kick tuturial ever.

[@adriancastro3232]

you´re the best, man, this is the type of kick I needed

[@aabe4327]

Damn it. All of the cool stuff that makes the difference seems to be Live 10 stuff. And here I am with Live 9.

[@erebosq0922]

just use the Bass Low extender preset and you're good

[@mtlahuiliaaarcillan9014]

Thanks for tutorials , greetings from Mexico !

[@aurum7695]

I wish people would at do a little more on the kick sample part, where to look for good ones and stuff, since it's so important, but even in an otherwise very good tutorial like this they literally spend like 5 seconds on the kick sample as if everyone just has hundreds of quality kick samples at their disposal.

[@Domar95]

i fr like the rumble technique I can see a lot of potential in using it i think the punch sounded hella poppy to me i would have eqd

[@bias69]

Good stuff

[@dominicsmith2257]

was skeptical about watching because of your voice, but have to say any doubts or anything completley went out the window after 30 seconds! very informative and easy to follow, excellent music taste and clearly a very skilled producer, and also very entertaining to watch! youve earned yourself a new sub bro, keep it up im loving this content :D

[@kolasau416]

will always be relevant! thank you so much!

[@davidortega2632]

FILTHY, THANKS DUDE

[@felipet.lamaison2177]

Thank you very much

[@gregtechno506]

Can somebody do a tutorial like this one but for fl studio? i'd be forever grateful i'm struggling to make kicks like this. This just sounds right the best one out here

[@chriscottrell6900]

great video - thanks!

[@jean-michelvabres2175]

Cleanest rack for rumble I've seen on KZbin since then. Thank you

[@lukas8558]

Great tutorial

[@nicolinowatson6152]

THANK U

[@jeszdav]

Thank you, more like this pls!

[@kwatecid2195]

verry great one! love it!!

[@yamimarik]

Can someone please tell me what he does at 1:30 - 1:37 how does he pull up the piano roll and puts the kick in

[@aaronpelaez6677]

you da man

[@tomaszjankowski9522]

FANTASTIC!!! but its clipping a bit on effect chain, is it ok? THX FOR SHARING YR KNOWLEDGE.

[@xisotopex]

is the compressor in the rumble effect chain or is it just after the effect rack?

[@tucagutsch9163]

It’s after the effect rack

[@beng70]

Any idea for audio effect rack on Fl like a plugin that will give me a dry and wet signal of both sounds

[@LibriumMusic]

Patcher

[@jocee2257]

Yes. Ableton.

[@viktoronopko2090]

How to make hardest rides, hats and crash cymbals. Nono... Not white noise only. It's more than that.

[@OppenMinerDev]

For my hats I usually use a very short 909 ride just for the attack and then a matching shaker to give it more body. Live 10 has enough of them. Also add some tambourine with a low cut to give it some ring if you like. Adjust volume on all samples until you like it. Glue all sounds together using a slight compressor and use saturation to fatten it up!

[@stasheAUS]

you ever put your kicks in mono?

[@oudoilleoville]

I could make kicks sound amazing with the help of this tutorial. Then I tried to make low frequencies mono with Fabfilter Pro-Q's mid/side eqing, but the kicks became quite lame compared to the stereo reverb rumble on low bass frequencies (listened with headphones). I'm not quite sure at which frequency to make them mono. I tried different freqs around 150 Hz but maybe that was too high? I'm still puzzled about this monoing, especially in this music style. That would make a great theme for a tutorial?

[@OppenMinerDev]

I usually do 100-120hz. If you master for vinyl bass frequencies become mono anyways!

[@diegoboom9111]

tech house like anotr please!

[@patrickbreak909]

Making it from a sample is easy, but how do you make the sample?

[@genex8534]

Try Punchbox (VST)

[@hidden53152312]

What does the drum buss do? Saturation?

[@jaimediaz512]

Is this rihkter?

[@CJ.97]

thanks. can you do this on fl studio? please bro

[@PGTXAU]

hey i have a question maybe its going to sound dumb, im a beginner but if you have this type of kick do you need a sub to it? thanks in advance guys. and great tutorial brother.

[@JarneBaugnee]

what if you dont have drum buss?

[@Chandler_bagels]

U'r great

[@jabing7]

Can you show us how to make this kick using 3rd party plugins? Thanks

[@guillegui6487]

No entiendo na

[@MrCasperexpress]

how to make a hard techno kick - get a badass techno sample kick.... then proceed to saturate accordingly... wallaahhhh

[@stuartmckay6777]

You should make a discord man

[@markkelvisar7799]

wh the fuck i dont have delay

[@angeloa.m.bontan7954]

make a beat 2:37

[@mercenaryex834]

Nice kick but why dont you cut the high frequencies? no need of them in a kick.

[@colinlamb315]

Nearly ever kick has high frequencies. That's what allows it to cut through the other high frequencies and stops it from sounding muffled and low

[@jacobprince8040]

Your speaking is kind when you stroke with saliva

[@ownedbymykitty270]

Good stuff, but I think you're overdoing it man. If you're using more than 2 instances of either EQ or compression and more than 2 saturators / distortion then adding a limiter and another EQ and an amp sim on top of everything, it's just way too much.

[@koncreteto2758]

goodluck mixing all that low end content with a sub.....

[@shilohwijnberg4620]

Great tutorial but damn ...boi your voice 😂

[@ownedbymykitty270]

lolz!!

[@lolococo7407]

so bad

[@jaquesfrancais3030]

thank you a lot!